Lines Matching +full:on +full:- +full:chip
10 Addresses scanned: -
12 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
18 Addresses scanned: -
20 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
26 Addresses scanned: -
28 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
34 Addresses scanned: -
36 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
42 Addresses scanned: -
44 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
50 Addresses scanned: -
52 Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
54 Author: Guenter Roeck <linux@roeck-us.net>
58 -----------
61 ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
64 ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
67 integrated 12 bit analog-to-digital converter (ADC), accessed using a
71 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
75 -----------
77 This driver does not auto-detect devices. You will have to instantiate the
78 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
85 The shunt value in micro-ohms can be set via device tree at compile-time. Please
90 ---------------------
97 -------------
99 The following attributes are supported. Limits are read-write, history reset
100 attributes are write-only, all other attributes are read-only.
103 inX_label "vin1" or "vout1" depending on chip variant and
104 configuration. On ADM1075, ADM1293, and ADM1294,
105 vout1 reports the voltage on the VAUX pin.
118 curr1_lcrit Critical minimum current. Depending on the chip
122 curr1_crit Critical maximum current. Depending on the chip
135 Power attributes are supported on ADM1075, ADM1272,
138 temp1_input Chip temperature.
139 temp1_max Maximum chip temperature.
141 temp1_crit Critical chip temperature.
146 Temperature attributes are supported on ADM1272 and