Lines Matching full:note

51 NOTE: Some adapters based on the Intel(R) Ethernet Controller 700 Series only
57 NOTE: For connections based on Intel(R) Ethernet Controller 700 Series, support
60 NOTE: In systems that do not have adequate airflow to cool the adapter and
100 NOTE: By default, the ethtool priv-flag vf-true-promisc-support is set to
109 when you enable promiscuous mode using the ip link commands above. Note that
119 Note that the order in which you set the VF to promiscuous mode and add the
133 NOTE: The Linux i40e driver supports the following flow types: IPv4, TCPv4, and
139 NOTE: The Linux i40e driver allows you to filter traffic based on a
264 Note that ICMP headers are parsed as 4 bytes of header and 4 bytes of payload.
266 the offset. Also note that ip4 filters match both ICMP frames as well as raw
281 Note that 0 is the PF, so the VF identifier is offset by 1. For example::
288 Note that these filters will not break internal routing rules, and will not
310 NOTE: This setting is not saved across reboots.
333 NOTE: The maximum MTU setting for Jumbo Frames is 9702. This value coincides
336 NOTE: This driver will attempt to use multiple page sized buffers to receive
383 NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
413 NOTE: You must have a flow control capable link partner.
423 Note: This command only enables or disables Flow Control if auto-negotiation is
431 Note: Flow Control auto-negotiation is part of link auto-negotiation. Depending
458 NOTE: This feature can be disabled for a specific Virtual Function (VF)::
526 NOTE: X710/XXV710 devices fail to enable Max VFs (64) when Multiple Functions
545 NOTE: Firmware LLDP can be disabled by setting the private flag disable-fw-lldp.
550 NOTE:
589 NOTE: For better performance when processing small (64B) frame sizes, try
731 NOTE: 1 Gb devices based on the Intel(R) Ethernet Network Connection X722 do