Lines Matching full:default
11 - 0 - disabled (default)
17 parameters to their default state (RFC1122 for hosts, RFC1812
21 Default value of TTL field (Time To Live) for outgoing (but not
23 Default: 64 (as recommended by RFC1700)
49 Default: FALSE
52 default 552 - minimum discovered Path MTU
55 By default we don't trust protocol path MTUs while forwarding
63 Default: 0 (disabled)
76 Default: 0
84 Default: 0 (disabled)
95 Default: 0 (Layer 3)
107 Default: 512kB Minimum: 64kB Maximum: 64MB
114 Default: 1 (Update priority.)
128 neigh/default/gc_thresh1 - INTEGER
132 Default: 128
134 neigh/default/gc_thresh2 - INTEGER
139 Default: 512
141 neigh/default/gc_thresh3 - INTEGER
146 Default: 1024
148 neigh/default/unres_qlen_bytes - INTEGER
155 Default: SK_WMEM_MAX, (same as net.core.wmem_default).
161 neigh/default/unres_qlen - INTEGER
167 Prior to linux 3.3, the default value is 3 which may cause
168 unexpected packet loss. The current default value is calculated
169 according to default value of unres_qlen_bytes and true size of
172 Default: 101
216 Default: 64
249 reset them. Default state is FALSE. It means that if overflow
262 Default: 1
269 Default is "reno" and the default setting (tcp_congestion_control).
275 Default: 31
286 Default : 1
302 Default : 48
311 Default : 48 (at least 8 bytes of payload per segment)
317 Default is set as part of kernel configuration.
336 Default: 3
355 Default: 2
365 Default: 1 (fallback enabled)
380 Default: 60 seconds
389 By default it's enabled with a non-zero value. 0 disables F-RTO.
400 Default: 0
422 Default: 500 (milliseconds).
426 Default: 2hours.
430 connection is broken. Default value: 9.
435 after probes started. Default value: 75sec i.e. connection
446 Default: 0 (disabled)
458 if network conditions require more than default value,
483 if network conditions require more than default value.
508 Default: 300
514 default.
521 - 1 - Disabled by default, enabled when an ICMP black hole detected
526 Discovery reprobe. The default is reprobing every 10 minutes as
531 will stop in respect to the width of search range in bytes. Default
535 By default, TCP saves various connection metrics in the route cache
545 Default is 1, which disables ssthresh metrics.
552 The default value is 8.
572 Default: 0x1
579 Default: 3
586 Default: 300
600 default.
609 The default value of 15 yields a hypothetical timeout of 924.6
622 Default: 0
624 tcp_rmem - vector of 3 INTEGERs: min, default, max
629 Default: 4K
631 default: initial size of receive buffer used by TCP sockets.
633 Default: 131072 bytes.
641 Default: between 131072 and 6MB, depending on RAM size.
649 The default is 1ms, based on TSO autosizing period.
651 Default : 1,000,000 ns (1 ms)
659 Default : 100,000 ns (100 us)
665 Default : 44
673 Default: 1
680 Default: FALSE
684 be retransmitted. Should not be higher than 255. Default value
693 Default: 1
718 The client support is enabled by flag 0x1 (on by default). The client
722 The server support is enabled by flag 0x2 (off by default). Then
738 default without explicit TCP_FASTOPEN socket option.
741 Default: 0x1
754 By default, it is set to 0 (feature is disabled).
778 will be retransmitted. Should not be higher than 127. Default value
791 Default: 1
802 Default: 2
811 Default: 200
819 Default: 120
827 Default: 3
840 Default: 2
845 tcp_wmem - vector of 3 INTEGERs: min, default, max
849 Default: 4K
851 default: initial size of send buffer used by TCP sockets. This
856 Default: 16K
864 Default: between 64K and 4MB, depending on RAM size.
877 Default: UINT_MAX (0xFFFFFFFF)
885 Default: 0
898 Default: 0
910 Default: 1048576 (16 * 65536)
915 Default: 1000
923 Default: 0 (disabled)
935 Default: 0 (disabled)
948 Default is calculated at boot time from amount of available memory.
955 Default: 4K
962 Default: 4K
974 Default: 1 (enabled)
986 Default: 1
996 Default: 10
1004 Default: 0
1014 Default: 0
1026 The default values are 32768 and 60999 respectively.
1057 Default: Empty
1070 Default: Empty
1079 Default: 1024
1085 Default: 0
1088 By default, bind() does not select the ports automatically even if
1094 Default: 0
1102 Default: 0
1112 Default: 1
1116 The default is "1 0", meaning, that nobody (not even root) may
1124 Default: 1
1130 Default: 1
1136 Default: 0
1142 Default: 1
1152 Default: 1000
1160 Default: 1000
1167 Default: 50
1174 Default mask: 0000001100000011000 (6168)
1194 .. [1] These are rate limited by default (see default mask above)
1202 Default: 1
1219 Default: 0
1223 Default: 20
1247 Default: 10
1252 Default: 2 (as specified by RFC2236 8.1)
1257 - 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
1264 - 3 - Enforce to use IGMP version 3. The same react with default 0.
1271 this value as default 0 is recommended.
1300 default:
1319 The default value 0 means that the device is the only interface
1362 default TRUE
1375 default TRUE
1384 Default: TRUE
1393 default FALSE
1402 default
1411 default FALSE
1417 default FALSE
1424 By default failed packets are discarded.
1437 Default value is 0. Note that some distributions enable it
1448 - 0 - (default) The kernel can respond to arp requests with addresses
1464 - 0 - (default) Use any local address, configured on any interface
1495 - 0 - (default): reply for any local target IP address, configured
1514 0 (default): do nothing
1561 Default: 10000 (10 seconds)
1567 Default: 1000 (1 seconds)
1579 1122, but is disabled by default for compatibility reasons.
1581 Default: off (0)
1588 Default: off (0)
1594 Default value is 0.
1606 Default TRUE
1628 Default value for IPV6_V6ONLY socket option,
1635 Default: FALSE (as specified in RFC3493)
1645 Default: TRUE
1655 1 automatic flow labels are enabled by default, they can be
1664 Default: 1
1674 Default: true
1696 Default: 0
1701 Default: 0 (Layer 3)
1716 Default: FALSE
1723 Default: 1 (as specified in RFC7217)
1729 Default: 3 (as specified in RFC7217)
1734 Default: 2 (as specified by RFC3810 9.1)
1744 Default: 8
1752 Default: 8
1758 Default: INT_MAX (unlimited)
1764 Default: INT_MAX (unlimited)
1769 generate this message; IPv6 does by default. Setting this sysctl
1773 Default: false (generate message)
1778 default which means route dumps and notifications contain the new
1785 Default: true (backward compat mode)
1814 Default is 0.
1816 ``conf/default/*``:
1817 Change the interface-specific default settings.
1845 Default: 0
1870 Functional default:
1876 Learn default router in Router Advertisement.
1878 Functional default:
1887 Default is to NOT accept these as it may be an un-intended
1890 Functional default:
1903 Default: 1
1911 Default: 0
1916 Functional default:
1927 Functional default:
1938 Functional default:
1946 Functional default:
1955 Functional default:
1963 Functional default:
1974 Default: 0
1980 Functional default:
1988 Default: 1
2005 By default, Host behaviour is assumed. This means:
2008 2. If accept_ra is TRUE (default), transmit Router
2010 3. If accept_ra is TRUE (default), accept Router
2012 4. If accept_redirects is TRUE (default), accept Redirects.
2024 Default: 0 (disabled) if global forwarding is disabled (default),
2028 Default Hop Limit to set.
2030 Default: 64
2033 Default Maximum Transfer Unit
2035 Default: 1280 (IPv6 required minimum)
2041 Default: 0
2047 Default: 60
2053 Default: 1
2058 Default: 4
2064 Default: 3
2071 Default: false
2082 Default:
2090 Default: 172800 (2 days)
2095 Default: 86400 (1 day)
2102 * 0 : system default
2105 Default: 0 (addresses are removed)
2113 Default: 600
2119 Default: 5
2127 Default: 16
2134 Default: FALSE (enable IPv6 operation)
2150 1 Enable DAD (default)
2162 Default: FALSE
2180 * 0 - (default): do nothing
2185 The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
2192 * 0 - (default)
2198 Default: 10000 (10 seconds)
2204 Default: 1000 (1 second)
2207 * 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
2215 * 1 - (default) discard fragmented neighbor discovery packets
2221 * 0: disabled (default)
2234 * 0: disabled (default)
2244 be stable privacy ones by default. This can be changed via the
2245 addrgenmode ip-link. conf/default/stable_secret is used as the
2252 By default the stable secret is unset.
2258 0 generate address based on EUI64 (default)
2270 By default this is turned off.
2277 By default this is turned off.
2287 Default: TRUE
2298 Default: 1000
2313 Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
2319 Default: 0
2325 Default: 0
2331 Default: 0
2352 Default: 1
2358 Default: 1
2364 Default: 1
2370 Default: 0
2376 Default: 0
2388 Default: 0
2403 Default: 0
2422 Default: 1
2444 Default: 0
2464 Default: 0
2475 Default: 0
2484 Default: 1
2490 Default: 4
2497 Default: 10
2504 Default: 8
2512 Default: 5
2528 Default: 0
2537 is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
2540 Default: 0xffff
2547 Default: 3000
2553 Default: 60000
2559 Default: 1000
2566 Default: 30000
2572 Default: 200
2575 The default lifetime of the SCTP cookie (in milliseconds). The cookie
2578 Default: 60000
2587 Default: 1
2602 Default: Dependent on configuration. MD5 if available, else SHA1 if
2619 Default: 0
2627 Default: 0
2640 Default is calculated at boot time from amount of available memory.
2642 sctp_rmem - vector of 3 INTEGERs: min, default, max
2643 Only the first value ("min") is used, "default" and "max" are
2650 Default: 4K
2652 sctp_wmem - vector of 3 INTEGERs: min, default, max
2653 Only the first value ("min") is used, "default" and "max" are
2660 Default: 4K
2670 Default: 1
2685 Default: 10