Lines Matching +full:on +full:- +full:chip

1 .. SPDX-License-Identifier: GPL-2.0
10 This driver supports the 53c700 and 53c700-66 chips.  It also supports
12 does sync (-66 and 710 only), disconnects and tag command queueing.
29 define if the chipset must be supported in little endian mode on a big
30 endian architecture (used for the 700 on parisc).
33 Using the Chip Core Driver
36 In order to plumb the 53c700 chip core driver into a working SCSI
37 driver, you need to know three things about the way the chip is wired
45 the SCSI Id from the card bios or whether the chip is wired for
54 asynchronous dividers for the chip.  As a general rule of thumb,
56 consistent with the best operation of the chip (although some choose
58 of an extra clock chip).  The best operation clock speeds are:
62 53c700-66  50MHz
87 -------------------
97 you have a card with more than one chip on it and you can read a
101 --------------------------------
106   Set to the clock speed of the chip in MHz.
109   Set to the base of the io or mem region for the register set. On 64
114   Set to the PCI board device.  Leave NULL for a non-pci board.  This is
119   output pins on the 710.  The settings should be a combination of
124   Set to 1 if the chip drives a differential bus.
127   Set to 1 if the chip is operating in little endian mode on a big
131   Set to 1 if the chip is a 53c710.