Lines Matching +full:enabled +full:- +full:strings
1 .. SPDX-License-Identifier: GPL-2.0
21 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
57 BT-948/958/958D, will always be available from my Linux Home Page at URL
69 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
90 94555, USA and can be reached at 510/796-6100 or on the World Wide Web at
92 mail at techsup@mylex.com, by Voice at 510/608-2400, or by FAX at 510/745-7715.
101 -----------------------------------
115 Synchronous negotiation is enabled for all target devices and the host
116 adapter will attempt to negotiate for 20.0 mega-transfers/second.
120 Synchronous negotiation is enabled for all target devices and the host
121 adapter will attempt to negotiate for 10.0 mega-transfers/second.
125 Synchronous negotiation is enabled for all target devices and the host
126 adapter will attempt to negotiate for 5.0 mega-transfers/second.
135 Synchronous negotiation to Ultra speed is enabled for target devices 0
141 are reported as "Enabled", Disabled", or a sequence of "Y" and "N" letters.
144 --------------------
146 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
165 -------------------
180 handled by issuing a soft reset to the host adapter and re-initialization.
190 -------------------------
192 On PCI systems running kernels compiled with PCI BIOS support enabled, this
198 The ISA compatible I/O port is disabled by default on the BT-948/958/958D.
201 -------------------------
208 -------------------------
225 FlashPoint LT (BT-930) Ultra SCSI-3
226 FlashPoint LT (BT-930R) Ultra SCSI-3 with RAIDPlus
227 FlashPoint LT (BT-920) Ultra SCSI-3 (BT-930 without BIOS)
228 FlashPoint DL (BT-932) Dual Channel Ultra SCSI-3
229 FlashPoint DL (BT-932R) Dual Channel Ultra SCSI-3 with RAIDPlus
230 FlashPoint LW (BT-950) Wide Ultra SCSI-3
231 FlashPoint LW (BT-950R) Wide Ultra SCSI-3 with RAIDPlus
232 FlashPoint DW (BT-952) Dual Channel Wide Ultra SCSI-3
233 FlashPoint DW (BT-952R) Dual Channel Wide Ultra SCSI-3 with RAIDPlus
239 BT-948 PCI Ultra SCSI-3
240 BT-958 PCI Wide Ultra SCSI-3
241 BT-958D PCI Wide Differential Ultra SCSI-3
247 BT-946C PCI Fast SCSI-2
248 BT-956C PCI Wide Fast SCSI-2
249 BT-956CD PCI Wide Differential Fast SCSI-2
250 BT-445C VLB Fast SCSI-2
251 BT-747C EISA Fast SCSI-2
252 BT-757C EISA Wide Fast SCSI-2
253 BT-757CD EISA Wide Differential Fast SCSI-2
254 BT-545C ISA Fast SCSI-2
255 BT-540CF ISA Fast SCSI-2
261 BT-445S VLB Fast SCSI-2
262 BT-747S EISA Fast SCSI-2
263 BT-747D EISA Differential Fast SCSI-2
264 BT-757S EISA Wide Fast SCSI-2
265 BT-757D EISA Wide Differential Fast SCSI-2
266 BT-545S ISA Fast SCSI-2
267 BT-542D ISA Differential Fast SCSI-2
268 BT-742A EISA SCSI-2 (742A revision H)
269 BT-542B ISA SCSI-2 (542B revision H)
275 BT-742A EISA SCSI-2 (742A revisions A - G)
276 BT-542B ISA SCSI-2 (542B revisions A - G)
283 retail kits. The BT- model numbers above refer to the bare board packaging.
284 The retail kit model numbers are found by replacing BT- with KT- in the above
293 ----------------
298 striping (RAID-0), and support for mirroring (RAID-1), fixed parity (RAID-4),
299 and distributed parity (RAID-5) is available separately. The built-in Linux
305 ----------------------------
314 speed to be negotiated with all devices, or UltraSCSI speed can be enabled on
319 BT-948/958/958D Installation Notes
322 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
326 ------------------------
328 When configured to factory default settings, the BT-948/958/958D will only
330 The BT-948/958/958D will not respond to any of the ISA compatible I/O ports
339 Ctrl-B at system startup and select "Adapter Configuration", "View/Modify
343 possible future I/O port conflicts. The older BT-946C/956C/956CD also have
347 -----------------------
350 PCI slots are scanned may appear reversed with the BT-948/958/958D as
351 compared to the BT-946C/956C/956CD. For booting from a SCSI disk to work
364 factory default settings of the BT-948/958/958D enumerate the host adapters
366 the AutoSCSI utility via Ctrl-B at system startup and select "Adapter
367 Configuration", "View/Modify Configuration", press Ctrl-F10, and then change
375 ----------------------------
377 The BT-948/958/958D ship with their configuration set to "Factory Default"
384 negotiated with all devices, or UltraSCSI speed can be enabled on an
395 strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
405 The "IO:" option specifies an ISA I/O Address to be probed for a non-PCI
499 TaggedQueuing:<Target-Spec>
501 The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls
502 Tagged Queuing individually for each Target Device. <Target-Spec> is a
587 tar -xvzf BusLogic-2.0.15.tar.gz
589 patch -p0 < BusLogic.patch (only for 2.0.33 and below)
604 "buslogic-announce-request@dandelion.com" with the line "subscribe" in the