Lines Matching full:default
45 Default: 116
48 Default: 1;
71 Default: 0
74 Default: 1
77 Default: 1
98 Default: 0
101 Default: 1
114 Default: -1
118 Default: the card type;
125 Default: enabled, for PCI and ISA PnP cards
167 Clock frequency for AD1816A chip (default = 0, 33000Hz)
208 Default: disabled
239 0 = disabled (default), 1 = auto-detect
262 AC'97 clock (default = 48000)
269 (-2 = Force probing, -1 = Default behavior, 0-2 = Use the
272 S/PDIF transfer over AC-link (default = 1)
290 Note: The default index value of this module is -2, i.e. the first
307 255 = Autodetect what is required (default)
337 DMA # for WSS capture (0,1), -1 = disabled (default)
339 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
341 IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
343 port # for OPL3 (0x388), -1 = disabled (default)
379 DMA # for WSS capture (0,1), -1 = disabled (default)
381 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
383 IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
385 port # for OPL3 (0x388), -1 = disabled (default)
428 Enable joystick (default off)
438 Override the default digital rate (Hz)
444 Note: The default index value of this module is -2, i.e. the first
461 ISA PnP detection - 0 = disable, 1 = enable (default)
498 1 = integrated PCI port (default on 8738),
503 1 = integrated PCI port (default on 8738),
506 Software-conversion of raw SPDIF packets (model 033 only) (default = 1)
544 ISA PnP detection - 0 = disable, 1 = enable (default)
580 Secondary codec ID (0 = disable, default)
597 Support OSS mmap mode (default = 0).
634 reference sample rate, 44100 or 48000 (default)
636 multiple to ref. sample rate, 1 or 2 (default)
640 The default is zero, which means no override.
679 Number of PCM devices assigned to each card (default = 1, up to 4)
681 Number of PCM substreams assigned to each PCM (default = 8, up to 128)
683 Use hrtimer (=1, default) or system timer (=0)
685 Fake buffer allocations (default = 1)
694 As default, snd-dummy drivers doesn't allocate the real buffers
725 allocated sequencer ports (4 by default)
727 limit of voices used for wavetable (64 by default)
730 unit. Default value is 128.
768 Enable joystick (default off)
785 (default), 1 = auto-detect
797 ISA PnP detection - 0 = disable, 1 = enable (default)
799 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
803 port # for OPL3 (option; share the same port as default)
823 ISA PnP detection - 0 = disable, 1 = enable (default)
830 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
863 playback channels (1-8, default=2)
865 capture channels (1-8, default=0)
869 support the power-management (0 = off, 1 = on, 2 = auto (default))
871 enable MPU401 (0 = off, 1 = on, 2 = auto (default))
873 enable joystick (default off)
999 -1 = system default: choose appropriate one per controller hardware,
1008 Bitmask to probe codecs (default = -1, meaning all slots);
1013 Only probing and no codec initialization (default=off);
1026 default value is set via ``CONFIG_SND_HDA_INPUT_BEEP_MODE`` kconfig.
1034 Enable Message Signaled Interrupt (MSI) (default = off)
1038 Reset HD-audio controller in power-saving mode (default = on)
1043 exact period/buffer sizes. (default = on)
1045 Enable/disable snooping (default = on)
1052 If your machine isn't listed there, the default (usually minimal)
1062 If the default configuration doesn't work and one of the above
1135 Send playback streams to analog outs by default.
1137 Enable Analog Out on Channel 63/64 by default.
1176 resolution, default value is 500 (0.5 sec)
1281 (default yes on nForce chips, otherwise off)
1284 ASUS laptops) (default off)
1287 controller chip (0 = off, 1 = on, -1 = default)
1317 Note: The default index value of this module is -2, i.e. the first
1331 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1333 reserved PCM voices for the synthesizer (default 2)
1335 1 = InterWave effects enable (default 0); requires 8 voices
1337 ISA PnP detection - 0 = disable, 1 = enable (default)
1362 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1364 reserved PCM voices for the synthesizer (default 2)
1366 1 = InterWave effects enable (default 0); requires 8 voices
1368 ISA PnP detection - 0 = disable, 1 = enable (default)
1449 enable external amp (enabled by default)
1451 GPIO pin number for external amp (0-15) or -1 for default pin (8
1530 PnP detection - 0 = disable, 1 = enable (default)
1547 enable write ndelay (default = 1)
1549 calibrate signal (default = 0)
1551 ISA PnP detection - 0 = disable, 1 = enable (default)
1553 Digital daughterboard present (default = 0)
1555 Config port (0x250, 0x260 or 0x270) default = PnP
1592 enable write ndelay (default = 1)
1594 calibrate signal (default = 0)
1596 ISA PnP detection - 0 = disable, 1 = enable (default)
1608 I/O port # for MTPAV (0x378,0x278, default=0x378)
1610 IRQ # for MTPAV (7,5, default=7)
1612 number of supported hardware ports, default=8.
1634 0 or 1 (disabled by default)
1638 0 or 1 (disabled by default)
1677 turned on as default. This option is worth to try if the
1694 ISA PnP detection - 0 = disable, 1 = enable (default)
1727 ISA PnP detection - 0 = disable, 1 = enable (default)
1752 ISA PnP detection - 0 = disable, 1 = enable (default)
1779 ISA PnP detection - 0 = disable, 1 = enable (default)
1854 enable beep using PCM (enabled as default)
1877 Joystick port # (default: 0x200)
1879 MPU401 port # (default: 0x330)
1881 OPL3 port # (default: 0x388)
1909 Enable precise pointer (doesn't work reliably). (default = 0)
1954 Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1956 ASP/CSP chip support - 0 = disable (default), 1 = enable
1958 ISA PnP detection - 0 = disable, 1 = enable (default)
2003 Enable gameport - 0 = disable (default), 1 = enable
2027 Enable gameport - 0 = disable (default), 1 = enable
2063 ISA PnP detection - 0 = disable, 1 = enable (default)
2089 Assume that we need to boot the OS (default:no);
2093 Assume that the FX process needs help (default:yes);
2095 when the driver is loaded. The default is to download the
2097 "default" operation, whatever that means.
2101 How long to wait without sleeping, usecs (default:150);
2112 How long to sleep when waiting for reply (default: 100)
2114 How many times to try sleeping during a wait (default: 50)
2116 Pathname to processed ICS2115 OS firmware (default:wavefront.os);
2122 How long to wait for a reset to take effect (default:2)
2124 How many seconds to wait for the RAM test (default:20)
2126 How many seconds to wait for the ICS2115 OS (default:10)
2143 Reverb Enable - 1 = enable, 0 = disable (default);
2146 Mic Gain Enable - 1 = enable, 0 = disable (default)
2161 38400 = default
2164 115200 = default
2167 1 = default
2217 Max. number of packets per URB (default: 8)
2221 Default: 0x0000
2223 Ignore any USB-controller regarding mixer interface (default: no)
2225 Enable auto-clock selection for UAC2 devices (default: yes)
2231 Use vmalloc() for allocations of the PCM buffers (default: yes).
2297 Enable joystick (default off) [VIA686A/686B only]
2299 AC'97 codec clock base (default 48000Hz)
2301 support DXS channels, 0 = auto (default), 1 = enable, 2 = disable,
2313 default value 1.4. Then the interrupt number will be
2321 As default (``dxs_support = 0``), 48k fixed rate is chosen
2333 work and the default setting is ok, ``dxs_support=3`` is the
2334 right choice. If the default setting doesn't work at all,
2351 AC'97 codec clock base (default 48000Hz)
2355 Note: The default index value of this module is -2, i.e. the first
2368 MIDI devices # (1-4, default=4)
2389 Capture IBL size. (default = 0, minimum size)
2409 The size is usually aligned to 126. As default (=0), the smallest
2421 Capture IBL size. (default = 0, minimum size)
2450 0x300,0x330,0x332,0x334, 0 (disable) by default,
2453 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
2456 0x201,0x202,0x204,0x205, 0 (disable) by default,
2488 default
2489 Don't override the default setting
2548 option ``cards_limit`` of snd module. As default it's set to 1.