Lines Matching +full:0 +full:x09
127 * hw:1,0 is Ao in playback and Di in capture
144 % aplay -D hw:1,0 -c2 -t raw -r48000 -fS24_3BE test.raw
184 When initialized with ``device_setup=0x00``, the snd-usb-audio module has
195 * ``device_setup=0x01``
199 - hw:1,0 is not available in capture mode
202 * ``device_setup=0x11``
206 - hw:1,0 is available in capture mode
232 * ``device_setup=0x09``
236 - hw:1,0 is not available in capture mode
239 * ``device_setup=0x19``
243 - hw:1,0 is available in capture mode and an active digital source must be
247 * ``device_setup=0x0D`` or ``0x10``
253 - hw:1,0 is available in captured mode
264 * ``device_setup=0x03``
268 - Caution with this setup the Do port is mapped to the pcm device hw:1,0
273 % aplay -D hw:1,0 --channels=6 ac3_S16_LE_encoded_file.raw
283 # modprobe snd-usb-audio index=1 device_setup=0x09
289 options snd-usb-audio index=1 device_setup=0x09
334 | 0 | 0 | 0 | Di|24B|96K|DTS|SET|
369 * b5 to b7 are reserved for future uses, and must be set to ``0``
377 - for instance choosing 0x05 (16bits 96kHz) will fail back to 0x09 since
397 * USB Interface nb.0
493 with jackd version 0.103.0 it's almost ok (just a small bug is affecting
502 % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
530 * The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
545 * define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc