Lines Matching full:frame

21 subdev node. This event is generated by the Frame Interval Monitor
29 Frame Interval Monitor in ipuX_csiY
35 sync by adding 1 dummy line every frame, which causes a rolling effect
38 permanent split image (one frame contains lines from two consecutive
41 From experiment it was found that during image rolling, the frame
43 value for the current standard, by about one frame time (60 usec),
48 time every frame, not a fixed value), we can use it to detect the
49 corrupt fields using a frame interval monitor. If the FIM detects a
50 bad frame interval, the ipuX_csiY subdev will send the event
66 How many frame interval measurements to average before comparing against
67 the nominal frame interval reported by the sensor. This can reduce noise
90 for measuring frame intervals. This is superior to the default method
91 of measuring frame intervals via EOF interrupt, since it is not subject
106 When input capture is disabled, frame intervals will be measured via