Lines Matching +full:1 +full:c
58 the main carrier has a 1/7 offset from the center.
77 The modulation can be one of the types defined by enum :c:type:`fe_modulation`.
88 ATSC (version 1) 8-VSB and 16-VSB.
90 DVB-C Annex A/C 16-QAM, 32-QAM, 64-QAM and 256-QAM.
91 DVB-C Annex B 64-QAM.
122 ATSC (version 1) No need to set. It is always 6MHz.
147 DVB-C and DVB-S.
159 The acceptable values are defined by :c:type:`fe_spectral_inversion`.
187 The acceptable values are defined by :c:type:`fe_code_rate`.
202 The acceptable values are defined by :c:type:`fe_sec_voltage`.
222 The acceptable values are defined by :c:type:`fe_pilot`.
234 The acceptable values are defined by :c:type:`fe_rolloff`.
268 The acceptable values are defined by :c:type:`fe_delivery_system`.
281 If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment
282 and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'.
284 If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'
288 Possible values: 0, 1, -1 (AUTO)
302 Possible values: 0, 1, -1 (AUTO)
312 This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
318 An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
327 from position 1-8 to 5-13 or anything in between.
339 Possible values: 0 .. 41, -1 (AUTO)
349 This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
355 Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1
367 This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
372 Possible values: 1 .. 13
379 DTV-ISDBT-LAYER[A-C] parameters
392 There are 3 parameter sets, for Layers A, B and C.
404 ``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to
408 (``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded
410 a ``SEGMENT_COUNT`` of 1.
412 In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
420 ``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled
422 ``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled
429 DTV_ISDBT_LAYER[A-C]_FEC
435 defined by :c:type:`fe_code_rate`.
444 DTV_ISDBT_LAYER[A-C]_MODULATION
450 :c:type:`fe_modulation`.
456 #. If layer C is ``DQPSK``, then layer B has to be ``DQPSK``.
464 DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT
469 Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)
472 ``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT``
477 :header-rows: 1
481 - .. row 1
491 - Layer C width
501 - 1 .. 13
503 - 1 .. 13
505 - 1 .. 13
511 - 1
515 - 1
517 - 1 .. 13
519 - 1 .. 13
527 - 1
529 - 1
535 - 1
539 - 1
541 - 1
543 - 1
555 DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING
560 Valid values: 0, 1, 2, 4, -1 (AUTO)
569 .. c:type:: isdbt_layer_interleaving_table
572 :header-rows: 1
576 - .. row 1
578 - ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING``
580 - Mode 1 (2K FFT)
598 - 1
604 - 1
640 Possible values: 0, 1, 2, 3, ..., 30, 31
655 Possible values: 0, 1, 2, 3, ..., 126, 127
667 Possible values: 1, 2, 3, 4, 5, 6, 7, 8
680 Possible values: 0, 1, 2, 3, ..., 30, 31
692 Possible values: 0, 1, 2, 3, ..., 14, 15
704 Possible values: 1, 2, 3, 4, 5, 6, 7, 8
716 The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`.
728 The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`.
740 The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
752 The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
764 The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`.
776 The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`.
788 :c:type:`atscmh_sccc_code_mode`.
791 .. _DTV-ATSCMH-SCCC-CODE-MODE-C:
801 :c:type:`atscmh_sccc_code_mode`.
814 :c:type:`atscmh_sccc_code_mode`.
832 The acceptable values are defined by :c:type:`fe_transmit_mode`.
842 The acceptable values are defined by :c:type:`fe_transmit_mode`.
850 The acceptable values are defined by :c:type:`fe_guard_interval`.
876 The acceptable values are defined by :c:type:`fe_transmit_mode`.
881 **mode** on such standard, and are numbered from 1 to 3:
886 1 2K ``TRANSMISSION_MODE_2K``
897 #. DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.
911 The acceptable values are defined by :c:type:`fe_hierarchy`.
928 For ISDB, the valid substream id range is from 1 to 65535.
959 The acceptable values are defined by :c:type:`fe_delivery_system`.
969 The acceptable values are defined by :c:type:`fe_interleaving`.
983 Possible values: 0, 1, LNA_AUTO
987 1, LNA on