• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright (c) 2008-2011 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #include <linux/moduleparam.h>
18 #include "hw.h"
19 #include "ar5008_initvals.h"
20 #include "ar9001_initvals.h"
21 #include "ar9002_initvals.h"
22 #include "ar9002_phy.h"
23 
24 /* General hardware code for the A5008/AR9001/AR9002 hadware families */
25 
ar9002_hw_init_mode_regs(struct ath_hw * ah)26 static int ar9002_hw_init_mode_regs(struct ath_hw *ah)
27 {
28 	if (AR_SREV_9271(ah)) {
29 		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271);
30 		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271);
31 		INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg);
32 		return 0;
33 	}
34 
35 	INIT_INI_ARRAY(&ah->iniPcieSerdes,
36 		       ar9280PciePhy_clkreq_always_on_L1_9280);
37 
38 	if (AR_SREV_9287_11_OR_LATER(ah)) {
39 		INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1);
40 		INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1);
41 	} else if (AR_SREV_9285_12_OR_LATER(ah)) {
42 		INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2);
43 		INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2);
44 	} else if (AR_SREV_9280_20_OR_LATER(ah)) {
45 		INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2);
46 		INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2);
47 
48 		INIT_INI_ARRAY(&ah->iniModesFastClock,
49 			       ar9280Modes_fast_clock_9280_2);
50 	} else if (AR_SREV_9160_10_OR_LATER(ah)) {
51 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160);
52 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160);
53 		if (AR_SREV_9160_11(ah)) {
54 			INIT_INI_ARRAY(&ah->iniAddac,
55 				       ar5416Addac_9160_1_1);
56 		} else {
57 			INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160);
58 		}
59 	} else if (AR_SREV_9100_OR_LATER(ah)) {
60 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100);
61 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100);
62 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100);
63 	} else {
64 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes);
65 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common);
66 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac);
67 	}
68 
69 	if (!AR_SREV_9280_20_OR_LATER(ah)) {
70 		/* Common for AR5416, AR913x, AR9160 */
71 		INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain);
72 
73 		/* Common for AR913x, AR9160 */
74 		if (!AR_SREV_5416(ah))
75 			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC_9100);
76 		else
77 			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC);
78 	}
79 
80 	/* iniAddac needs to be modified for these chips */
81 	if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
82 		struct ar5416IniArray *addac = &ah->iniAddac;
83 		u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns;
84 		u32 *data;
85 
86 		data = devm_kzalloc(ah->dev, size, GFP_KERNEL);
87 		if (!data)
88 			return -ENOMEM;
89 
90 		memcpy(data, addac->ia_array, size);
91 		addac->ia_array = data;
92 
93 		if (!AR_SREV_5416_22_OR_LATER(ah)) {
94 			/* override CLKDRV value */
95 			INI_RA(addac, 31,1) = 0;
96 		}
97 	}
98 	if (AR_SREV_9287_11_OR_LATER(ah)) {
99 		INIT_INI_ARRAY(&ah->iniCckfirNormal,
100 		       ar9287Common_normal_cck_fir_coeff_9287_1_1);
101 		INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
102 		       ar9287Common_japan_2484_cck_fir_coeff_9287_1_1);
103 	}
104 	return 0;
105 }
106 
ar9280_20_hw_init_rxgain_ini(struct ath_hw * ah)107 static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah)
108 {
109 	u32 rxgain_type;
110 
111 	if (ah->eep_ops->get_eeprom_rev(ah) >= AR5416_EEP_MINOR_VER_17) {
112 		rxgain_type = ah->eep_ops->get_eeprom(ah, EEP_RXGAIN_TYPE);
113 
114 		if (rxgain_type == AR5416_EEP_RXGAIN_13DB_BACKOFF)
115 			INIT_INI_ARRAY(&ah->iniModesRxGain,
116 				       ar9280Modes_backoff_13db_rxgain_9280_2);
117 		else if (rxgain_type == AR5416_EEP_RXGAIN_23DB_BACKOFF)
118 			INIT_INI_ARRAY(&ah->iniModesRxGain,
119 				       ar9280Modes_backoff_23db_rxgain_9280_2);
120 		else
121 			INIT_INI_ARRAY(&ah->iniModesRxGain,
122 				       ar9280Modes_original_rxgain_9280_2);
123 	} else {
124 		INIT_INI_ARRAY(&ah->iniModesRxGain,
125 			       ar9280Modes_original_rxgain_9280_2);
126 	}
127 }
128 
ar9280_20_hw_init_txgain_ini(struct ath_hw * ah,u32 txgain_type)129 static void ar9280_20_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
130 {
131 	if (ah->eep_ops->get_eeprom_rev(ah) >= AR5416_EEP_MINOR_VER_19) {
132 		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
133 			INIT_INI_ARRAY(&ah->iniModesTxGain,
134 				       ar9280Modes_high_power_tx_gain_9280_2);
135 		else
136 			INIT_INI_ARRAY(&ah->iniModesTxGain,
137 				       ar9280Modes_original_tx_gain_9280_2);
138 	} else {
139 		INIT_INI_ARRAY(&ah->iniModesTxGain,
140 			       ar9280Modes_original_tx_gain_9280_2);
141 	}
142 }
143 
ar9271_hw_init_txgain_ini(struct ath_hw * ah,u32 txgain_type)144 static void ar9271_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
145 {
146 	if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
147 		INIT_INI_ARRAY(&ah->iniModesTxGain,
148 			       ar9271Modes_high_power_tx_gain_9271);
149 	else
150 		INIT_INI_ARRAY(&ah->iniModesTxGain,
151 			       ar9271Modes_normal_power_tx_gain_9271);
152 }
153 
ar9002_hw_init_mode_gain_regs(struct ath_hw * ah)154 static void ar9002_hw_init_mode_gain_regs(struct ath_hw *ah)
155 {
156 	u32 txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE);
157 
158 	if (AR_SREV_9287_11_OR_LATER(ah))
159 		INIT_INI_ARRAY(&ah->iniModesRxGain,
160 			       ar9287Modes_rx_gain_9287_1_1);
161 	else if (AR_SREV_9280_20(ah))
162 		ar9280_20_hw_init_rxgain_ini(ah);
163 
164 	if (AR_SREV_9271(ah)) {
165 		ar9271_hw_init_txgain_ini(ah, txgain_type);
166 	} else if (AR_SREV_9287_11_OR_LATER(ah)) {
167 		INIT_INI_ARRAY(&ah->iniModesTxGain,
168 			       ar9287Modes_tx_gain_9287_1_1);
169 	} else if (AR_SREV_9280_20(ah)) {
170 		ar9280_20_hw_init_txgain_ini(ah, txgain_type);
171 	} else if (AR_SREV_9285_12_OR_LATER(ah)) {
172 		/* txgain table */
173 		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) {
174 			if (AR_SREV_9285E_20(ah)) {
175 				INIT_INI_ARRAY(&ah->iniModesTxGain,
176 					       ar9285Modes_XE2_0_high_power);
177 			} else {
178 				INIT_INI_ARRAY(&ah->iniModesTxGain,
179 					ar9285Modes_high_power_tx_gain_9285_1_2);
180 			}
181 		} else {
182 			if (AR_SREV_9285E_20(ah)) {
183 				INIT_INI_ARRAY(&ah->iniModesTxGain,
184 					       ar9285Modes_XE2_0_normal_power);
185 			} else {
186 				INIT_INI_ARRAY(&ah->iniModesTxGain,
187 					ar9285Modes_original_tx_gain_9285_1_2);
188 			}
189 		}
190 	}
191 }
192 
193 /*
194  * Helper for ASPM support.
195  *
196  * Disable PLL when in L0s as well as receiver clock when in L1.
197  * This power saving option must be enabled through the SerDes.
198  *
199  * Programming the SerDes must go through the same 288 bit serial shift
200  * register as the other analog registers.  Hence the 9 writes.
201  */
ar9002_hw_configpcipowersave(struct ath_hw * ah,bool power_off)202 static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
203 					 bool power_off)
204 {
205 	u8 i;
206 	u32 val;
207 
208 	/* Nothing to do on restore for 11N */
209 	if (!power_off /* !restore */) {
210 		if (AR_SREV_9280_20_OR_LATER(ah)) {
211 			/*
212 			 * AR9280 2.0 or later chips use SerDes values from the
213 			 * initvals.h initialized depending on chipset during
214 			 * __ath9k_hw_init()
215 			 */
216 			for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
217 				REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
218 					  INI_RA(&ah->iniPcieSerdes, i, 1));
219 			}
220 		} else {
221 			ENABLE_REGWRITE_BUFFER(ah);
222 
223 			REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
224 			REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
225 
226 			/* RX shut off when elecidle is asserted */
227 			REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
228 			REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
229 			REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
230 
231 			/*
232 			 * Ignore ah->ah_config.pcie_clock_req setting for
233 			 * pre-AR9280 11n
234 			 */
235 			REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
236 
237 			REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
238 			REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
239 			REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
240 
241 			/* Load the new settings */
242 			REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
243 
244 			REGWRITE_BUFFER_FLUSH(ah);
245 		}
246 
247 		udelay(1000);
248 	}
249 
250 	if (power_off) {
251 		/* clear bit 19 to disable L1 */
252 		REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
253 
254 		val = REG_READ(ah, AR_WA);
255 
256 		/*
257 		 * Set PCIe workaround bits
258 		 * In AR9280 and AR9285, bit 14 in WA register (disable L1)
259 		 * should only  be set when device enters D3 and be
260 		 * cleared when device comes back to D0.
261 		 */
262 		if (ah->config.pcie_waen) {
263 			if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
264 				val |= AR_WA_D3_L1_DISABLE;
265 		} else {
266 			if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
267 				if (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
268 					val |= AR_WA_D3_L1_DISABLE;
269 			} else if (AR_SREV_9280(ah)) {
270 				if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
271 					val |= AR_WA_D3_L1_DISABLE;
272 			}
273 		}
274 
275 		if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
276 			/*
277 			 * Disable bit 6 and 7 before entering D3 to
278 			 * prevent system hang.
279 			 */
280 			val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
281 		}
282 
283 		if (AR_SREV_9280(ah))
284 			val |= AR_WA_BIT22;
285 
286 		if (AR_SREV_9285E_20(ah))
287 			val |= AR_WA_BIT23;
288 
289 		REG_WRITE(ah, AR_WA, val);
290 	} else {
291 		if (ah->config.pcie_waen) {
292 			val = ah->config.pcie_waen;
293 			val &= (~AR_WA_D3_L1_DISABLE);
294 		} else {
295 			if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
296 				val = AR9285_WA_DEFAULT;
297 				val &= (~AR_WA_D3_L1_DISABLE);
298 			} else if (AR_SREV_9280(ah)) {
299 				/*
300 				 * For AR9280 chips, bit 22 of 0x4004
301 				 * needs to be set.
302 				 */
303 				val = AR9280_WA_DEFAULT;
304 				val &= (~AR_WA_D3_L1_DISABLE);
305 			} else {
306 				val = AR_WA_DEFAULT;
307 			}
308 		}
309 
310 		/* WAR for ASPM system hang */
311 		if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
312 			val |= (AR_WA_BIT6 | AR_WA_BIT7);
313 
314 		if (AR_SREV_9285E_20(ah))
315 			val |= AR_WA_BIT23;
316 
317 		REG_WRITE(ah, AR_WA, val);
318 
319 		/* set bit 19 to allow forcing of pcie core into L1 state */
320 		REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
321 	}
322 }
323 
ar9002_hw_get_radiorev(struct ath_hw * ah)324 static int ar9002_hw_get_radiorev(struct ath_hw *ah)
325 {
326 	u32 val;
327 	int i;
328 
329 	ENABLE_REGWRITE_BUFFER(ah);
330 
331 	REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
332 	for (i = 0; i < 8; i++)
333 		REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
334 
335 	REGWRITE_BUFFER_FLUSH(ah);
336 
337 	val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
338 	val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
339 
340 	return ath9k_hw_reverse_bits(val, 8);
341 }
342 
ar9002_hw_rf_claim(struct ath_hw * ah)343 int ar9002_hw_rf_claim(struct ath_hw *ah)
344 {
345 	u32 val;
346 
347 	REG_WRITE(ah, AR_PHY(0), 0x00000007);
348 
349 	val = ar9002_hw_get_radiorev(ah);
350 	switch (val & AR_RADIO_SREV_MAJOR) {
351 	case 0:
352 		val = AR_RAD5133_SREV_MAJOR;
353 		break;
354 	case AR_RAD5133_SREV_MAJOR:
355 	case AR_RAD5122_SREV_MAJOR:
356 	case AR_RAD2133_SREV_MAJOR:
357 	case AR_RAD2122_SREV_MAJOR:
358 		break;
359 	default:
360 		ath_err(ath9k_hw_common(ah),
361 			"Radio Chip Rev 0x%02X not supported\n",
362 			val & AR_RADIO_SREV_MAJOR);
363 		return -EOPNOTSUPP;
364 	}
365 
366 	ah->hw_version.analog5GhzRev = val;
367 
368 	return 0;
369 }
370 
ar9002_hw_enable_async_fifo(struct ath_hw * ah)371 void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
372 {
373 	if (AR_SREV_9287_13_OR_LATER(ah)) {
374 		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
375 				AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
376 		REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
377 		REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
378 				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
379 		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
380 				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
381 	}
382 }
383 
ar9002_hw_init_hang_checks(struct ath_hw * ah)384 static void ar9002_hw_init_hang_checks(struct ath_hw *ah)
385 {
386 	if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
387 		ah->config.hw_hang_checks |= HW_BB_RIFS_HANG;
388 		ah->config.hw_hang_checks |= HW_BB_DFS_HANG;
389 	}
390 
391 	if (AR_SREV_9280(ah))
392 		ah->config.hw_hang_checks |= HW_BB_RX_CLEAR_STUCK_HANG;
393 
394 	if (AR_SREV_5416(ah) || AR_SREV_9100(ah) || AR_SREV_9160(ah))
395 		ah->config.hw_hang_checks |= HW_MAC_HANG;
396 }
397 
398 /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
ar9002_hw_attach_ops(struct ath_hw * ah)399 int ar9002_hw_attach_ops(struct ath_hw *ah)
400 {
401 	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
402 	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
403 	int ret;
404 
405 	ret = ar9002_hw_init_mode_regs(ah);
406 	if (ret)
407 		return ret;
408 
409 	priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs;
410 	priv_ops->init_hang_checks = ar9002_hw_init_hang_checks;
411 
412 	ops->config_pci_powersave = ar9002_hw_configpcipowersave;
413 
414 	ret = ar5008_hw_attach_phy_ops(ah);
415 	if (ret)
416 		return ret;
417 
418 	if (AR_SREV_9280_20_OR_LATER(ah))
419 		ar9002_hw_attach_phy_ops(ah);
420 
421 	ar9002_hw_attach_calib_ops(ah);
422 	ar9002_hw_attach_mac_ops(ah);
423 	return 0;
424 }
425 
ar9002_hw_load_ani_reg(struct ath_hw * ah,struct ath9k_channel * chan)426 void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan)
427 {
428 	u32 modesIndex;
429 	int i;
430 
431 	if (IS_CHAN_5GHZ(chan))
432 		modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
433 	else
434 		modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
435 
436 	ENABLE_REGWRITE_BUFFER(ah);
437 
438 	for (i = 0; i < ah->iniModes_9271_ANI_reg.ia_rows; i++) {
439 		u32 reg = INI_RA(&ah->iniModes_9271_ANI_reg, i, 0);
440 		u32 val = INI_RA(&ah->iniModes_9271_ANI_reg, i, modesIndex);
441 		u32 val_orig;
442 
443 		if (reg == AR_PHY_CCK_DETECT) {
444 			val_orig = REG_READ(ah, reg);
445 			val &= AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
446 			val_orig &= ~AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
447 
448 			REG_WRITE(ah, reg, val|val_orig);
449 		} else
450 			REG_WRITE(ah, reg, val);
451 	}
452 
453 	REGWRITE_BUFFER_FLUSH(ah);
454 }
455