1 /*
2 * arch/m68k/bvme6000/config.c
3 *
4 * Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk]
5 *
6 * Based on:
7 *
8 * linux/amiga/config.c
9 *
10 * Copyright (C) 1993 Hamish Macdonald
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file README.legal in the main directory of this archive
14 * for more details.
15 */
16
17 #include <linux/types.h>
18 #include <linux/kernel.h>
19 #include <linux/mm.h>
20 #include <linux/tty.h>
21 #include <linux/clocksource.h>
22 #include <linux/console.h>
23 #include <linux/linkage.h>
24 #include <linux/init.h>
25 #include <linux/major.h>
26 #include <linux/genhd.h>
27 #include <linux/rtc.h>
28 #include <linux/interrupt.h>
29 #include <linux/bcd.h>
30
31 #include <asm/bootinfo.h>
32 #include <asm/bootinfo-vme.h>
33 #include <asm/byteorder.h>
34 #include <asm/setup.h>
35 #include <asm/irq.h>
36 #include <asm/traps.h>
37 #include <asm/machdep.h>
38 #include <asm/bvme6000hw.h>
39
40 static void bvme6000_get_model(char *model);
41 extern void bvme6000_sched_init(irq_handler_t handler);
42 extern int bvme6000_hwclk (int, struct rtc_time *);
43 extern void bvme6000_reset (void);
44 void bvme6000_set_vectors (void);
45
46
bvme6000_parse_bootinfo(const struct bi_record * bi)47 int __init bvme6000_parse_bootinfo(const struct bi_record *bi)
48 {
49 if (be16_to_cpu(bi->tag) == BI_VME_TYPE)
50 return 0;
51 else
52 return 1;
53 }
54
bvme6000_reset(void)55 void bvme6000_reset(void)
56 {
57 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
58
59 pr_info("\r\n\nCalled bvme6000_reset\r\n"
60 "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r");
61 /* The string of returns is to delay the reset until the whole
62 * message is output. */
63 /* Enable the watchdog, via PIT port C bit 4 */
64
65 pit->pcddr |= 0x10; /* WDOG enable */
66
67 while(1)
68 ;
69 }
70
bvme6000_get_model(char * model)71 static void bvme6000_get_model(char *model)
72 {
73 sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
74 }
75
76 /*
77 * This function is called during kernel startup to initialize
78 * the bvme6000 IRQ handling routines.
79 */
bvme6000_init_IRQ(void)80 static void __init bvme6000_init_IRQ(void)
81 {
82 m68k_setup_user_interrupt(VEC_USER, 192);
83 }
84
config_bvme6000(void)85 void __init config_bvme6000(void)
86 {
87 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
88
89 /* Board type is only set by newer versions of vmelilo/tftplilo */
90 if (!vme_brdtype) {
91 if (m68k_cputype == CPU_68060)
92 vme_brdtype = VME_TYPE_BVME6000;
93 else
94 vme_brdtype = VME_TYPE_BVME4000;
95 }
96 #if 0
97 /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug
98 * debugger. Note trap_init() will splat the abort vector, but
99 * bvme6000_init_IRQ() will put it back again. Hopefully. */
100
101 bvme6000_set_vectors();
102 #endif
103
104 mach_max_dma_address = 0xffffffff;
105 mach_sched_init = bvme6000_sched_init;
106 mach_init_IRQ = bvme6000_init_IRQ;
107 mach_hwclk = bvme6000_hwclk;
108 mach_reset = bvme6000_reset;
109 mach_get_model = bvme6000_get_model;
110
111 pr_info("Board is %sconfigured as a System Controller\n",
112 *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
113
114 /* Now do the PIT configuration */
115
116 pit->pgcr = 0x00; /* Unidirectional 8 bit, no handshake for now */
117 pit->psrr = 0x18; /* PIACK and PIRQ functions enabled */
118 pit->pacr = 0x00; /* Sub Mode 00, H2 i/p, no DMA */
119 pit->padr = 0x00; /* Just to be tidy! */
120 pit->paddr = 0x00; /* All inputs for now (safest) */
121 pit->pbcr = 0x80; /* Sub Mode 1x, H4 i/p, no DMA */
122 pit->pbdr = 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40);
123 /* PRI, SYSCON?, Level3, SCC clks from xtal */
124 pit->pbddr = 0xf3; /* Mostly outputs */
125 pit->pcdr = 0x01; /* PA transceiver disabled */
126 pit->pcddr = 0x03; /* WDOG disable */
127
128 /* Disable snooping for Ethernet and VME accesses */
129
130 bvme_acr_addrctl = 0;
131 }
132
133
bvme6000_abort_int(int irq,void * dev_id)134 irqreturn_t bvme6000_abort_int (int irq, void *dev_id)
135 {
136 unsigned long *new = (unsigned long *)vectors;
137 unsigned long *old = (unsigned long *)0xf8000000;
138
139 /* Wait for button release */
140 while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS)
141 ;
142
143 *(new+4) = *(old+4); /* Illegal instruction */
144 *(new+9) = *(old+9); /* Trace */
145 *(new+47) = *(old+47); /* Trap #15 */
146 *(new+0x1f) = *(old+0x1f); /* ABORT switch */
147 return IRQ_HANDLED;
148 }
149
150 static u64 bvme6000_read_clk(struct clocksource *cs);
151
152 static struct clocksource bvme6000_clk = {
153 .name = "rtc",
154 .rating = 250,
155 .read = bvme6000_read_clk,
156 .mask = CLOCKSOURCE_MASK(32),
157 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
158 };
159
160 static u32 clk_total, clk_offset;
161
162 #define RTC_TIMER_CLOCK_FREQ 8000000
163 #define RTC_TIMER_CYCLES (RTC_TIMER_CLOCK_FREQ / HZ)
164 #define RTC_TIMER_COUNT ((RTC_TIMER_CYCLES / 2) - 1)
165
bvme6000_timer_int(int irq,void * dev_id)166 static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
167 {
168 irq_handler_t timer_routine = dev_id;
169 unsigned long flags;
170 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
171 unsigned char msr;
172
173 local_irq_save(flags);
174 msr = rtc->msr & 0xc0;
175 rtc->msr = msr | 0x20; /* Ack the interrupt */
176 clk_total += RTC_TIMER_CYCLES;
177 clk_offset = 0;
178 timer_routine(0, NULL);
179 local_irq_restore(flags);
180
181 return IRQ_HANDLED;
182 }
183
184 /*
185 * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms
186 * (40000 x 125ns). It will interrupt every 10ms, when T1 goes low.
187 * So, when reading the elapsed time, you should read timer1,
188 * subtract it from 39999, and then add 40000 if T1 is high.
189 * That gives you the number of 125ns ticks in to the 10ms period,
190 * so divide by 8 to get the microsecond result.
191 */
192
bvme6000_sched_init(irq_handler_t timer_routine)193 void bvme6000_sched_init (irq_handler_t timer_routine)
194 {
195 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
196 unsigned char msr = rtc->msr & 0xc0;
197
198 rtc->msr = 0; /* Ensure timer registers accessible */
199
200 if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer",
201 timer_routine))
202 panic ("Couldn't register timer int");
203
204 rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */
205 rtc->t1msb = RTC_TIMER_COUNT >> 8;
206 rtc->t1lsb = RTC_TIMER_COUNT & 0xff;
207 rtc->irr_icr1 &= 0xef; /* Route timer 1 to INTR pin */
208 rtc->msr = 0x40; /* Access int.cntrl, etc */
209 rtc->pfr_icr0 = 0x80; /* Just timer 1 ints enabled */
210 rtc->irr_icr1 = 0;
211 rtc->t1cr_omr = 0x0a; /* INTR+T1 active lo, push-pull */
212 rtc->t0cr_rtmr &= 0xdf; /* Stop timers in standby */
213 rtc->msr = 0; /* Access timer 1 control */
214 rtc->t1cr_omr = 0x05; /* Mode 2, ext clk, GO */
215
216 rtc->msr = msr;
217
218 clocksource_register_hz(&bvme6000_clk, RTC_TIMER_CLOCK_FREQ);
219
220 if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0,
221 "abort", bvme6000_abort_int))
222 panic ("Couldn't register abort int");
223 }
224
225
226 /*
227 * NOTE: Don't accept any readings within 5us of rollover, as
228 * the T1INT bit may be a little slow getting set. There is also
229 * a fault in the chip, meaning that reads may produce invalid
230 * results...
231 */
232
bvme6000_read_clk(struct clocksource * cs)233 static u64 bvme6000_read_clk(struct clocksource *cs)
234 {
235 unsigned long flags;
236 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
237 volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
238 unsigned char msr, msb;
239 unsigned char t1int, t1op;
240 u32 v = 800000, ov;
241
242 local_irq_save(flags);
243
244 msr = rtc->msr & 0xc0;
245 rtc->msr = 0; /* Ensure timer registers accessible */
246
247 do {
248 ov = v;
249 t1int = rtc->msr & 0x20;
250 t1op = pit->pcdr & 0x04;
251 rtc->t1cr_omr |= 0x40; /* Latch timer1 */
252 msb = rtc->t1msb; /* Read timer1 */
253 v = (msb << 8) | rtc->t1lsb; /* Read timer1 */
254 } while (t1int != (rtc->msr & 0x20) ||
255 t1op != (pit->pcdr & 0x04) ||
256 abs(ov-v) > 80 ||
257 v > RTC_TIMER_COUNT - (RTC_TIMER_COUNT / 100));
258
259 v = RTC_TIMER_COUNT - v;
260 if (!t1op) /* If in second half cycle.. */
261 v += RTC_TIMER_CYCLES / 2;
262 if (msb > 0 && t1int)
263 clk_offset = RTC_TIMER_CYCLES;
264 rtc->msr = msr;
265
266 v += clk_offset + clk_total;
267
268 local_irq_restore(flags);
269
270 return v;
271 }
272
273 /*
274 * Looks like op is non-zero for setting the clock, and zero for
275 * reading the clock.
276 *
277 * struct hwclk_time {
278 * unsigned sec; 0..59
279 * unsigned min; 0..59
280 * unsigned hour; 0..23
281 * unsigned day; 1..31
282 * unsigned mon; 0..11
283 * unsigned year; 00...
284 * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set
285 * };
286 */
287
bvme6000_hwclk(int op,struct rtc_time * t)288 int bvme6000_hwclk(int op, struct rtc_time *t)
289 {
290 volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
291 unsigned char msr = rtc->msr & 0xc0;
292
293 rtc->msr = 0x40; /* Ensure clock and real-time-mode-register
294 * are accessible */
295 if (op)
296 { /* Write.... */
297 rtc->t0cr_rtmr = t->tm_year%4;
298 rtc->bcd_tenms = 0;
299 rtc->bcd_sec = bin2bcd(t->tm_sec);
300 rtc->bcd_min = bin2bcd(t->tm_min);
301 rtc->bcd_hr = bin2bcd(t->tm_hour);
302 rtc->bcd_dom = bin2bcd(t->tm_mday);
303 rtc->bcd_mth = bin2bcd(t->tm_mon + 1);
304 rtc->bcd_year = bin2bcd(t->tm_year%100);
305 if (t->tm_wday >= 0)
306 rtc->bcd_dow = bin2bcd(t->tm_wday+1);
307 rtc->t0cr_rtmr = t->tm_year%4 | 0x08;
308 }
309 else
310 { /* Read.... */
311 do {
312 t->tm_sec = bcd2bin(rtc->bcd_sec);
313 t->tm_min = bcd2bin(rtc->bcd_min);
314 t->tm_hour = bcd2bin(rtc->bcd_hr);
315 t->tm_mday = bcd2bin(rtc->bcd_dom);
316 t->tm_mon = bcd2bin(rtc->bcd_mth)-1;
317 t->tm_year = bcd2bin(rtc->bcd_year);
318 if (t->tm_year < 70)
319 t->tm_year += 100;
320 t->tm_wday = bcd2bin(rtc->bcd_dow)-1;
321 } while (t->tm_sec != bcd2bin(rtc->bcd_sec));
322 }
323
324 rtc->msr = msr;
325
326 return 0;
327 }
328