• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Thunderbolt DMA configuration based mailbox support
4  *
5  * Copyright (C) 2017, Intel Corporation
6  * Authors: Michael Jamet <michael.jamet@intel.com>
7  *          Mika Westerberg <mika.westerberg@linux.intel.com>
8  */
9 
10 #include <linux/delay.h>
11 #include <linux/slab.h>
12 
13 #include "dma_port.h"
14 #include "tb_regs.h"
15 
16 #define DMA_PORT_CAP			0x3e
17 
18 #define MAIL_DATA			1
19 #define MAIL_DATA_DWORDS		16
20 
21 #define MAIL_IN				17
22 #define MAIL_IN_CMD_SHIFT		28
23 #define MAIL_IN_CMD_MASK		GENMASK(31, 28)
24 #define MAIL_IN_CMD_FLASH_WRITE		0x0
25 #define MAIL_IN_CMD_FLASH_UPDATE_AUTH	0x1
26 #define MAIL_IN_CMD_FLASH_READ		0x2
27 #define MAIL_IN_CMD_POWER_CYCLE		0x4
28 #define MAIL_IN_DWORDS_SHIFT		24
29 #define MAIL_IN_DWORDS_MASK		GENMASK(27, 24)
30 #define MAIL_IN_ADDRESS_SHIFT		2
31 #define MAIL_IN_ADDRESS_MASK		GENMASK(23, 2)
32 #define MAIL_IN_CSS			BIT(1)
33 #define MAIL_IN_OP_REQUEST		BIT(0)
34 
35 #define MAIL_OUT			18
36 #define MAIL_OUT_STATUS_RESPONSE	BIT(29)
37 #define MAIL_OUT_STATUS_CMD_SHIFT	4
38 #define MAIL_OUT_STATUS_CMD_MASK	GENMASK(7, 4)
39 #define MAIL_OUT_STATUS_MASK		GENMASK(3, 0)
40 #define MAIL_OUT_STATUS_COMPLETED	0
41 #define MAIL_OUT_STATUS_ERR_AUTH	1
42 #define MAIL_OUT_STATUS_ERR_ACCESS	2
43 
44 #define DMA_PORT_TIMEOUT		5000 /* ms */
45 #define DMA_PORT_RETRIES		3
46 
47 /**
48  * struct tb_dma_port - DMA control port
49  * @sw: Switch the DMA port belongs to
50  * @port: Switch port number where DMA capability is found
51  * @base: Start offset of the mailbox registers
52  * @buf: Temporary buffer to store a single block
53  */
54 struct tb_dma_port {
55 	struct tb_switch *sw;
56 	u8 port;
57 	u32 base;
58 	u8 *buf;
59 };
60 
61 /*
62  * When the switch is in safe mode it supports very little functionality
63  * so we don't validate that much here.
64  */
dma_port_match(const struct tb_cfg_request * req,const struct ctl_pkg * pkg)65 static bool dma_port_match(const struct tb_cfg_request *req,
66 			   const struct ctl_pkg *pkg)
67 {
68 	u64 route = tb_cfg_get_route(pkg->buffer) & ~BIT_ULL(63);
69 
70 	if (pkg->frame.eof == TB_CFG_PKG_ERROR)
71 		return true;
72 	if (pkg->frame.eof != req->response_type)
73 		return false;
74 	if (route != tb_cfg_get_route(req->request))
75 		return false;
76 	if (pkg->frame.size != req->response_size)
77 		return false;
78 
79 	return true;
80 }
81 
dma_port_copy(struct tb_cfg_request * req,const struct ctl_pkg * pkg)82 static bool dma_port_copy(struct tb_cfg_request *req, const struct ctl_pkg *pkg)
83 {
84 	memcpy(req->response, pkg->buffer, req->response_size);
85 	return true;
86 }
87 
dma_port_read(struct tb_ctl * ctl,void * buffer,u64 route,u32 port,u32 offset,u32 length,int timeout_msec)88 static int dma_port_read(struct tb_ctl *ctl, void *buffer, u64 route,
89 			 u32 port, u32 offset, u32 length, int timeout_msec)
90 {
91 	struct cfg_read_pkg request = {
92 		.header = tb_cfg_make_header(route),
93 		.addr = {
94 			.seq = 1,
95 			.port = port,
96 			.space = TB_CFG_PORT,
97 			.offset = offset,
98 			.length = length,
99 		},
100 	};
101 	struct tb_cfg_request *req;
102 	struct cfg_write_pkg reply;
103 	struct tb_cfg_result res;
104 
105 	req = tb_cfg_request_alloc();
106 	if (!req)
107 		return -ENOMEM;
108 
109 	req->match = dma_port_match;
110 	req->copy = dma_port_copy;
111 	req->request = &request;
112 	req->request_size = sizeof(request);
113 	req->request_type = TB_CFG_PKG_READ;
114 	req->response = &reply;
115 	req->response_size = 12 + 4 * length;
116 	req->response_type = TB_CFG_PKG_READ;
117 
118 	res = tb_cfg_request_sync(ctl, req, timeout_msec);
119 
120 	tb_cfg_request_put(req);
121 
122 	if (res.err)
123 		return res.err;
124 
125 	memcpy(buffer, &reply.data, 4 * length);
126 	return 0;
127 }
128 
dma_port_write(struct tb_ctl * ctl,const void * buffer,u64 route,u32 port,u32 offset,u32 length,int timeout_msec)129 static int dma_port_write(struct tb_ctl *ctl, const void *buffer, u64 route,
130 			  u32 port, u32 offset, u32 length, int timeout_msec)
131 {
132 	struct cfg_write_pkg request = {
133 		.header = tb_cfg_make_header(route),
134 		.addr = {
135 			.seq = 1,
136 			.port = port,
137 			.space = TB_CFG_PORT,
138 			.offset = offset,
139 			.length = length,
140 		},
141 	};
142 	struct tb_cfg_request *req;
143 	struct cfg_read_pkg reply;
144 	struct tb_cfg_result res;
145 
146 	memcpy(&request.data, buffer, length * 4);
147 
148 	req = tb_cfg_request_alloc();
149 	if (!req)
150 		return -ENOMEM;
151 
152 	req->match = dma_port_match;
153 	req->copy = dma_port_copy;
154 	req->request = &request;
155 	req->request_size = 12 + 4 * length;
156 	req->request_type = TB_CFG_PKG_WRITE;
157 	req->response = &reply;
158 	req->response_size = sizeof(reply);
159 	req->response_type = TB_CFG_PKG_WRITE;
160 
161 	res = tb_cfg_request_sync(ctl, req, timeout_msec);
162 
163 	tb_cfg_request_put(req);
164 
165 	return res.err;
166 }
167 
dma_find_port(struct tb_switch * sw)168 static int dma_find_port(struct tb_switch *sw)
169 {
170 	static const int ports[] = { 3, 5, 7 };
171 	int i;
172 
173 	/*
174 	 * The DMA (NHI) port is either 3, 5 or 7 depending on the
175 	 * controller. Try all of them.
176 	 */
177 	for (i = 0; i < ARRAY_SIZE(ports); i++) {
178 		u32 type;
179 		int ret;
180 
181 		ret = dma_port_read(sw->tb->ctl, &type, tb_route(sw), ports[i],
182 				    2, 1, DMA_PORT_TIMEOUT);
183 		if (!ret && (type & 0xffffff) == TB_TYPE_NHI)
184 			return ports[i];
185 	}
186 
187 	return -ENODEV;
188 }
189 
190 /**
191  * dma_port_alloc() - Finds DMA control port from a switch pointed by route
192  * @sw: Switch from where find the DMA port
193  *
194  * Function checks if the switch NHI port supports DMA configuration
195  * based mailbox capability and if it does, allocates and initializes
196  * DMA port structure. Returns %NULL if the capabity was not found.
197  *
198  * The DMA control port is functional also when the switch is in safe
199  * mode.
200  */
dma_port_alloc(struct tb_switch * sw)201 struct tb_dma_port *dma_port_alloc(struct tb_switch *sw)
202 {
203 	struct tb_dma_port *dma;
204 	int port;
205 
206 	port = dma_find_port(sw);
207 	if (port < 0)
208 		return NULL;
209 
210 	dma = kzalloc(sizeof(*dma), GFP_KERNEL);
211 	if (!dma)
212 		return NULL;
213 
214 	dma->buf = kmalloc_array(MAIL_DATA_DWORDS, sizeof(u32), GFP_KERNEL);
215 	if (!dma->buf) {
216 		kfree(dma);
217 		return NULL;
218 	}
219 
220 	dma->sw = sw;
221 	dma->port = port;
222 	dma->base = DMA_PORT_CAP;
223 
224 	return dma;
225 }
226 
227 /**
228  * dma_port_free() - Release DMA control port structure
229  * @dma: DMA control port
230  */
dma_port_free(struct tb_dma_port * dma)231 void dma_port_free(struct tb_dma_port *dma)
232 {
233 	if (dma) {
234 		kfree(dma->buf);
235 		kfree(dma);
236 	}
237 }
238 
dma_port_wait_for_completion(struct tb_dma_port * dma,unsigned int timeout)239 static int dma_port_wait_for_completion(struct tb_dma_port *dma,
240 					unsigned int timeout)
241 {
242 	unsigned long end = jiffies + msecs_to_jiffies(timeout);
243 	struct tb_switch *sw = dma->sw;
244 
245 	do {
246 		int ret;
247 		u32 in;
248 
249 		ret = dma_port_read(sw->tb->ctl, &in, tb_route(sw), dma->port,
250 				    dma->base + MAIL_IN, 1, 50);
251 		if (ret) {
252 			if (ret != -ETIMEDOUT)
253 				return ret;
254 		} else if (!(in & MAIL_IN_OP_REQUEST)) {
255 			return 0;
256 		}
257 
258 		usleep_range(50, 100);
259 	} while (time_before(jiffies, end));
260 
261 	return -ETIMEDOUT;
262 }
263 
status_to_errno(u32 status)264 static int status_to_errno(u32 status)
265 {
266 	switch (status & MAIL_OUT_STATUS_MASK) {
267 	case MAIL_OUT_STATUS_COMPLETED:
268 		return 0;
269 	case MAIL_OUT_STATUS_ERR_AUTH:
270 		return -EINVAL;
271 	case MAIL_OUT_STATUS_ERR_ACCESS:
272 		return -EACCES;
273 	}
274 
275 	return -EIO;
276 }
277 
dma_port_request(struct tb_dma_port * dma,u32 in,unsigned int timeout)278 static int dma_port_request(struct tb_dma_port *dma, u32 in,
279 			    unsigned int timeout)
280 {
281 	struct tb_switch *sw = dma->sw;
282 	u32 out;
283 	int ret;
284 
285 	ret = dma_port_write(sw->tb->ctl, &in, tb_route(sw), dma->port,
286 			     dma->base + MAIL_IN, 1, DMA_PORT_TIMEOUT);
287 	if (ret)
288 		return ret;
289 
290 	ret = dma_port_wait_for_completion(dma, timeout);
291 	if (ret)
292 		return ret;
293 
294 	ret = dma_port_read(sw->tb->ctl, &out, tb_route(sw), dma->port,
295 			    dma->base + MAIL_OUT, 1, DMA_PORT_TIMEOUT);
296 	if (ret)
297 		return ret;
298 
299 	return status_to_errno(out);
300 }
301 
dma_port_flash_read_block(struct tb_dma_port * dma,u32 address,void * buf,u32 size)302 static int dma_port_flash_read_block(struct tb_dma_port *dma, u32 address,
303 				     void *buf, u32 size)
304 {
305 	struct tb_switch *sw = dma->sw;
306 	u32 in, dwaddress, dwords;
307 	int ret;
308 
309 	dwaddress = address / 4;
310 	dwords = size / 4;
311 
312 	in = MAIL_IN_CMD_FLASH_READ << MAIL_IN_CMD_SHIFT;
313 	if (dwords < MAIL_DATA_DWORDS)
314 		in |= (dwords << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK;
315 	in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK;
316 	in |= MAIL_IN_OP_REQUEST;
317 
318 	ret = dma_port_request(dma, in, DMA_PORT_TIMEOUT);
319 	if (ret)
320 		return ret;
321 
322 	return dma_port_read(sw->tb->ctl, buf, tb_route(sw), dma->port,
323 			     dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT);
324 }
325 
dma_port_flash_write_block(struct tb_dma_port * dma,u32 address,const void * buf,u32 size)326 static int dma_port_flash_write_block(struct tb_dma_port *dma, u32 address,
327 				      const void *buf, u32 size)
328 {
329 	struct tb_switch *sw = dma->sw;
330 	u32 in, dwaddress, dwords;
331 	int ret;
332 
333 	dwords = size / 4;
334 
335 	/* Write the block to MAIL_DATA registers */
336 	ret = dma_port_write(sw->tb->ctl, buf, tb_route(sw), dma->port,
337 			    dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT);
338 
339 	in = MAIL_IN_CMD_FLASH_WRITE << MAIL_IN_CMD_SHIFT;
340 
341 	/* CSS header write is always done to the same magic address */
342 	if (address >= DMA_PORT_CSS_ADDRESS) {
343 		dwaddress = DMA_PORT_CSS_ADDRESS;
344 		in |= MAIL_IN_CSS;
345 	} else {
346 		dwaddress = address / 4;
347 	}
348 
349 	in |= ((dwords - 1) << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK;
350 	in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK;
351 	in |= MAIL_IN_OP_REQUEST;
352 
353 	return dma_port_request(dma, in, DMA_PORT_TIMEOUT);
354 }
355 
356 /**
357  * dma_port_flash_read() - Read from active flash region
358  * @dma: DMA control port
359  * @address: Address relative to the start of active region
360  * @buf: Buffer where the data is read
361  * @size: Size of the buffer
362  */
dma_port_flash_read(struct tb_dma_port * dma,unsigned int address,void * buf,size_t size)363 int dma_port_flash_read(struct tb_dma_port *dma, unsigned int address,
364 			void *buf, size_t size)
365 {
366 	unsigned int retries = DMA_PORT_RETRIES;
367 
368 	do {
369 		unsigned int offset;
370 		size_t nbytes;
371 		int ret;
372 
373 		offset = address & 3;
374 		nbytes = min_t(size_t, size + offset, MAIL_DATA_DWORDS * 4);
375 
376 		ret = dma_port_flash_read_block(dma, address, dma->buf,
377 						ALIGN(nbytes, 4));
378 		if (ret) {
379 			if (ret == -ETIMEDOUT) {
380 				if (retries--)
381 					continue;
382 				ret = -EIO;
383 			}
384 			return ret;
385 		}
386 
387 		nbytes -= offset;
388 		memcpy(buf, dma->buf + offset, nbytes);
389 
390 		size -= nbytes;
391 		address += nbytes;
392 		buf += nbytes;
393 	} while (size > 0);
394 
395 	return 0;
396 }
397 
398 /**
399  * dma_port_flash_write() - Write to non-active flash region
400  * @dma: DMA control port
401  * @address: Address relative to the start of non-active region
402  * @buf: Data to write
403  * @size: Size of the buffer
404  *
405  * Writes block of data to the non-active flash region of the switch. If
406  * the address is given as %DMA_PORT_CSS_ADDRESS the block is written
407  * using CSS command.
408  */
dma_port_flash_write(struct tb_dma_port * dma,unsigned int address,const void * buf,size_t size)409 int dma_port_flash_write(struct tb_dma_port *dma, unsigned int address,
410 			 const void *buf, size_t size)
411 {
412 	unsigned int retries = DMA_PORT_RETRIES;
413 	unsigned int offset;
414 
415 	if (address >= DMA_PORT_CSS_ADDRESS) {
416 		offset = 0;
417 		if (size > DMA_PORT_CSS_MAX_SIZE)
418 			return -E2BIG;
419 	} else {
420 		offset = address & 3;
421 		address = address & ~3;
422 	}
423 
424 	do {
425 		u32 nbytes = min_t(u32, size, MAIL_DATA_DWORDS * 4);
426 		int ret;
427 
428 		memcpy(dma->buf + offset, buf, nbytes);
429 
430 		ret = dma_port_flash_write_block(dma, address, buf, nbytes);
431 		if (ret) {
432 			if (ret == -ETIMEDOUT) {
433 				if (retries--)
434 					continue;
435 				ret = -EIO;
436 			}
437 			return ret;
438 		}
439 
440 		size -= nbytes;
441 		address += nbytes;
442 		buf += nbytes;
443 	} while (size > 0);
444 
445 	return 0;
446 }
447 
448 /**
449  * dma_port_flash_update_auth() - Starts flash authenticate cycle
450  * @dma: DMA control port
451  *
452  * Starts the flash update authentication cycle. If the image in the
453  * non-active area was valid, the switch starts upgrade process where
454  * active and non-active area get swapped in the end. Caller should call
455  * dma_port_flash_update_auth_status() to get status of this command.
456  * This is because if the switch in question is root switch the
457  * thunderbolt host controller gets reset as well.
458  */
dma_port_flash_update_auth(struct tb_dma_port * dma)459 int dma_port_flash_update_auth(struct tb_dma_port *dma)
460 {
461 	u32 in;
462 
463 	in = MAIL_IN_CMD_FLASH_UPDATE_AUTH << MAIL_IN_CMD_SHIFT;
464 	in |= MAIL_IN_OP_REQUEST;
465 
466 	return dma_port_request(dma, in, 150);
467 }
468 
469 /**
470  * dma_port_flash_update_auth_status() - Reads status of update auth command
471  * @dma: DMA control port
472  * @status: Status code of the operation
473  *
474  * The function checks if there is status available from the last update
475  * auth command. Returns %0 if there is no status and no further
476  * action is required. If there is status, %1 is returned instead and
477  * @status holds the failure code.
478  *
479  * Negative return means there was an error reading status from the
480  * switch.
481  */
dma_port_flash_update_auth_status(struct tb_dma_port * dma,u32 * status)482 int dma_port_flash_update_auth_status(struct tb_dma_port *dma, u32 *status)
483 {
484 	struct tb_switch *sw = dma->sw;
485 	u32 out, cmd;
486 	int ret;
487 
488 	ret = dma_port_read(sw->tb->ctl, &out, tb_route(sw), dma->port,
489 			    dma->base + MAIL_OUT, 1, DMA_PORT_TIMEOUT);
490 	if (ret)
491 		return ret;
492 
493 	/* Check if the status relates to flash update auth */
494 	cmd = (out & MAIL_OUT_STATUS_CMD_MASK) >> MAIL_OUT_STATUS_CMD_SHIFT;
495 	if (cmd == MAIL_IN_CMD_FLASH_UPDATE_AUTH) {
496 		if (status)
497 			*status = out & MAIL_OUT_STATUS_MASK;
498 
499 		/* Reset is needed in any case */
500 		return 1;
501 	}
502 
503 	return 0;
504 }
505 
506 /**
507  * dma_port_power_cycle() - Power cycles the switch
508  * @dma: DMA control port
509  *
510  * Triggers power cycle to the switch.
511  */
dma_port_power_cycle(struct tb_dma_port * dma)512 int dma_port_power_cycle(struct tb_dma_port *dma)
513 {
514 	u32 in;
515 
516 	in = MAIL_IN_CMD_POWER_CYCLE << MAIL_IN_CMD_SHIFT;
517 	in |= MAIL_IN_OP_REQUEST;
518 
519 	return dma_port_request(dma, in, 150);
520 }
521