• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
2 /* src/prism2/driver/prism2sta.c
3  *
4  * Implements the station functionality for prism2
5  *
6  * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
7  * --------------------------------------------------------------------
8  *
9  * linux-wlan
10  *
11  *   The contents of this file are subject to the Mozilla Public
12  *   License Version 1.1 (the "License"); you may not use this file
13  *   except in compliance with the License. You may obtain a copy of
14  *   the License at http://www.mozilla.org/MPL/
15  *
16  *   Software distributed under the License is distributed on an "AS
17  *   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
18  *   implied. See the License for the specific language governing
19  *   rights and limitations under the License.
20  *
21  *   Alternatively, the contents of this file may be used under the
22  *   terms of the GNU Public License version 2 (the "GPL"), in which
23  *   case the provisions of the GPL are applicable instead of the
24  *   above.  If you wish to allow the use of your version of this file
25  *   only under the terms of the GPL and not to allow others to use
26  *   your version of this file under the MPL, indicate your decision
27  *   by deleting the provisions above and replace them with the notice
28  *   and other provisions required by the GPL.  If you do not delete
29  *   the provisions above, a recipient may use your version of this
30  *   file under either the MPL or the GPL.
31  *
32  * --------------------------------------------------------------------
33  *
34  * Inquiries regarding the linux-wlan Open Source project can be
35  * made directly to:
36  *
37  * AbsoluteValue Systems Inc.
38  * info@linux-wlan.com
39  * http://www.linux-wlan.com
40  *
41  * --------------------------------------------------------------------
42  *
43  * Portions of the development of this software were funded by
44  * Intersil Corporation as part of PRISM(R) chipset product development.
45  *
46  * --------------------------------------------------------------------
47  *
48  * This file implements the module and linux pcmcia routines for the
49  * prism2 driver.
50  *
51  * --------------------------------------------------------------------
52  */
53 
54 #include <linux/module.h>
55 #include <linux/kernel.h>
56 #include <linux/sched.h>
57 #include <linux/types.h>
58 #include <linux/slab.h>
59 #include <linux/wireless.h>
60 #include <linux/netdevice.h>
61 #include <linux/workqueue.h>
62 #include <linux/byteorder/generic.h>
63 #include <linux/etherdevice.h>
64 
65 #include <linux/io.h>
66 #include <linux/delay.h>
67 #include <asm/byteorder.h>
68 #include <linux/if_arp.h>
69 #include <linux/if_ether.h>
70 #include <linux/bitops.h>
71 
72 #include "p80211types.h"
73 #include "p80211hdr.h"
74 #include "p80211mgmt.h"
75 #include "p80211conv.h"
76 #include "p80211msg.h"
77 #include "p80211netdev.h"
78 #include "p80211req.h"
79 #include "p80211metadef.h"
80 #include "p80211metastruct.h"
81 #include "hfa384x.h"
82 #include "prism2mgmt.h"
83 
84 static char *dev_info = "prism2_usb";
85 static struct wlandevice *create_wlan(void);
86 
87 int prism2_reset_holdtime = 30;	/* Reset hold time in ms */
88 int prism2_reset_settletime = 100;	/* Reset settle time in ms */
89 
90 static int prism2_doreset;	/* Do a reset at init? */
91 
92 module_param(prism2_doreset, int, 0644);
93 MODULE_PARM_DESC(prism2_doreset, "Issue a reset on initialization");
94 
95 module_param(prism2_reset_holdtime, int, 0644);
96 MODULE_PARM_DESC(prism2_reset_holdtime, "reset hold time in ms");
97 module_param(prism2_reset_settletime, int, 0644);
98 MODULE_PARM_DESC(prism2_reset_settletime, "reset settle time in ms");
99 
100 MODULE_LICENSE("Dual MPL/GPL");
101 
102 static int prism2sta_open(struct wlandevice *wlandev);
103 static int prism2sta_close(struct wlandevice *wlandev);
104 static void prism2sta_reset(struct wlandevice *wlandev);
105 static int prism2sta_txframe(struct wlandevice *wlandev, struct sk_buff *skb,
106 			     union p80211_hdr *p80211_hdr,
107 			     struct p80211_metawep *p80211_wep);
108 static int prism2sta_mlmerequest(struct wlandevice *wlandev,
109 				 struct p80211msg *msg);
110 static int prism2sta_getcardinfo(struct wlandevice *wlandev);
111 static int prism2sta_globalsetup(struct wlandevice *wlandev);
112 static int prism2sta_setmulticast(struct wlandevice *wlandev,
113 				  struct net_device *dev);
114 
115 static void prism2sta_inf_handover(struct wlandevice *wlandev,
116 				   struct hfa384x_inf_frame *inf);
117 static void prism2sta_inf_tallies(struct wlandevice *wlandev,
118 				  struct hfa384x_inf_frame *inf);
119 static void prism2sta_inf_hostscanresults(struct wlandevice *wlandev,
120 					  struct hfa384x_inf_frame *inf);
121 static void prism2sta_inf_scanresults(struct wlandevice *wlandev,
122 				      struct hfa384x_inf_frame *inf);
123 static void prism2sta_inf_chinforesults(struct wlandevice *wlandev,
124 					struct hfa384x_inf_frame *inf);
125 static void prism2sta_inf_linkstatus(struct wlandevice *wlandev,
126 				     struct hfa384x_inf_frame *inf);
127 static void prism2sta_inf_assocstatus(struct wlandevice *wlandev,
128 				      struct hfa384x_inf_frame *inf);
129 static void prism2sta_inf_authreq(struct wlandevice *wlandev,
130 				  struct hfa384x_inf_frame *inf);
131 static void prism2sta_inf_authreq_defer(struct wlandevice *wlandev,
132 					struct hfa384x_inf_frame *inf);
133 static void prism2sta_inf_psusercnt(struct wlandevice *wlandev,
134 				    struct hfa384x_inf_frame *inf);
135 
136 /*
137  * prism2sta_open
138  *
139  * WLAN device open method.  Called from p80211netdev when kernel
140  * device open (start) method is called in response to the
141  * SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
142  * from clear to set.
143  *
144  * Arguments:
145  *	wlandev		wlan device structure
146  *
147  * Returns:
148  *	0	success
149  *	>0	f/w reported error
150  *	<0	driver reported error
151  *
152  * Side effects:
153  *
154  * Call context:
155  *	process thread
156  */
prism2sta_open(struct wlandevice * wlandev)157 static int prism2sta_open(struct wlandevice *wlandev)
158 {
159 	/* We don't currently have to do anything else.
160 	 * The setup of the MAC should be subsequently completed via
161 	 * the mlme commands.
162 	 * Higher layers know we're ready from dev->start==1 and
163 	 * dev->tbusy==0.  Our rx path knows to pass up received/
164 	 * frames because of dev->flags&IFF_UP is true.
165 	 */
166 
167 	return 0;
168 }
169 
170 /*
171  * prism2sta_close
172  *
173  * WLAN device close method.  Called from p80211netdev when kernel
174  * device close method is called in response to the
175  * SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
176  * from set to clear.
177  *
178  * Arguments:
179  *	wlandev		wlan device structure
180  *
181  * Returns:
182  *	0	success
183  *	>0	f/w reported error
184  *	<0	driver reported error
185  *
186  * Side effects:
187  *
188  * Call context:
189  *	process thread
190  */
prism2sta_close(struct wlandevice * wlandev)191 static int prism2sta_close(struct wlandevice *wlandev)
192 {
193 	/* We don't currently have to do anything else.
194 	 * Higher layers know we're not ready from dev->start==0 and
195 	 * dev->tbusy==1.  Our rx path knows to not pass up received
196 	 * frames because of dev->flags&IFF_UP is false.
197 	 */
198 
199 	return 0;
200 }
201 
202 /*
203  * prism2sta_reset
204  *
205  * Currently not implemented.
206  *
207  * Arguments:
208  *	wlandev		wlan device structure
209  *	none
210  *
211  * Returns:
212  *	nothing
213  *
214  * Side effects:
215  *
216  * Call context:
217  *	process thread
218  */
prism2sta_reset(struct wlandevice * wlandev)219 static void prism2sta_reset(struct wlandevice *wlandev)
220 {
221 }
222 
223 /*
224  * prism2sta_txframe
225  *
226  * Takes a frame from p80211 and queues it for transmission.
227  *
228  * Arguments:
229  *	wlandev		wlan device structure
230  *	pb		packet buffer struct.  Contains an 802.11
231  *			data frame.
232  *       p80211_hdr      points to the 802.11 header for the packet.
233  * Returns:
234  *	0		Success and more buffs available
235  *	1		Success but no more buffs
236  *	2		Allocation failure
237  *	4		Buffer full or queue busy
238  *
239  * Side effects:
240  *
241  * Call context:
242  *	process thread
243  */
prism2sta_txframe(struct wlandevice * wlandev,struct sk_buff * skb,union p80211_hdr * p80211_hdr,struct p80211_metawep * p80211_wep)244 static int prism2sta_txframe(struct wlandevice *wlandev, struct sk_buff *skb,
245 			     union p80211_hdr *p80211_hdr,
246 			     struct p80211_metawep *p80211_wep)
247 {
248 	struct hfa384x *hw = wlandev->priv;
249 
250 	/* If necessary, set the 802.11 WEP bit */
251 	if ((wlandev->hostwep & (HOSTWEP_PRIVACYINVOKED | HOSTWEP_ENCRYPT)) ==
252 	    HOSTWEP_PRIVACYINVOKED) {
253 		p80211_hdr->a3.fc |= cpu_to_le16(WLAN_SET_FC_ISWEP(1));
254 	}
255 
256 	return hfa384x_drvr_txframe(hw, skb, p80211_hdr, p80211_wep);
257 }
258 
259 /*
260  * prism2sta_mlmerequest
261  *
262  * wlan command message handler.  All we do here is pass the message
263  * over to the prism2sta_mgmt_handler.
264  *
265  * Arguments:
266  *	wlandev		wlan device structure
267  *	msg		wlan command message
268  * Returns:
269  *	0		success
270  *	<0		successful acceptance of message, but we're
271  *			waiting for an async process to finish before
272  *			we're done with the msg.  When the asynch
273  *			process is done, we'll call the p80211
274  *			function p80211req_confirm() .
275  *	>0		An error occurred while we were handling
276  *			the message.
277  *
278  * Side effects:
279  *
280  * Call context:
281  *	process thread
282  */
prism2sta_mlmerequest(struct wlandevice * wlandev,struct p80211msg * msg)283 static int prism2sta_mlmerequest(struct wlandevice *wlandev,
284 				 struct p80211msg *msg)
285 {
286 	struct hfa384x *hw = wlandev->priv;
287 
288 	int result = 0;
289 
290 	switch (msg->msgcode) {
291 	case DIDMSG_DOT11REQ_MIBGET:
292 		pr_debug("Received mibget request\n");
293 		result = prism2mgmt_mibset_mibget(wlandev, msg);
294 		break;
295 	case DIDMSG_DOT11REQ_MIBSET:
296 		pr_debug("Received mibset request\n");
297 		result = prism2mgmt_mibset_mibget(wlandev, msg);
298 		break;
299 	case DIDMSG_DOT11REQ_SCAN:
300 		pr_debug("Received scan request\n");
301 		result = prism2mgmt_scan(wlandev, msg);
302 		break;
303 	case DIDMSG_DOT11REQ_SCAN_RESULTS:
304 		pr_debug("Received scan_results request\n");
305 		result = prism2mgmt_scan_results(wlandev, msg);
306 		break;
307 	case DIDMSG_DOT11REQ_START:
308 		pr_debug("Received mlme start request\n");
309 		result = prism2mgmt_start(wlandev, msg);
310 		break;
311 		/*
312 		 * Prism2 specific messages
313 		 */
314 	case DIDMSG_P2REQ_READPDA:
315 		pr_debug("Received mlme readpda request\n");
316 		result = prism2mgmt_readpda(wlandev, msg);
317 		break;
318 	case DIDMSG_P2REQ_RAMDL_STATE:
319 		pr_debug("Received mlme ramdl_state request\n");
320 		result = prism2mgmt_ramdl_state(wlandev, msg);
321 		break;
322 	case DIDMSG_P2REQ_RAMDL_WRITE:
323 		pr_debug("Received mlme ramdl_write request\n");
324 		result = prism2mgmt_ramdl_write(wlandev, msg);
325 		break;
326 	case DIDMSG_P2REQ_FLASHDL_STATE:
327 		pr_debug("Received mlme flashdl_state request\n");
328 		result = prism2mgmt_flashdl_state(wlandev, msg);
329 		break;
330 	case DIDMSG_P2REQ_FLASHDL_WRITE:
331 		pr_debug("Received mlme flashdl_write request\n");
332 		result = prism2mgmt_flashdl_write(wlandev, msg);
333 		break;
334 		/*
335 		 * Linux specific messages
336 		 */
337 	case DIDMSG_LNXREQ_HOSTWEP:
338 		break;		/* ignore me. */
339 	case DIDMSG_LNXREQ_IFSTATE: {
340 		struct p80211msg_lnxreq_ifstate *ifstatemsg;
341 
342 		pr_debug("Received mlme ifstate request\n");
343 		ifstatemsg = (struct p80211msg_lnxreq_ifstate *)msg;
344 		result = prism2sta_ifstate(wlandev,
345 					   ifstatemsg->ifstate.data);
346 		ifstatemsg->resultcode.status =
347 			P80211ENUM_msgitem_status_data_ok;
348 		ifstatemsg->resultcode.data = result;
349 		result = 0;
350 		break;
351 	}
352 	case DIDMSG_LNXREQ_WLANSNIFF:
353 		pr_debug("Received mlme wlansniff request\n");
354 		result = prism2mgmt_wlansniff(wlandev, msg);
355 		break;
356 	case DIDMSG_LNXREQ_AUTOJOIN:
357 		pr_debug("Received mlme autojoin request\n");
358 		result = prism2mgmt_autojoin(wlandev, msg);
359 		break;
360 	case DIDMSG_LNXREQ_COMMSQUALITY: {
361 		struct p80211msg_lnxreq_commsquality *qualmsg;
362 
363 		pr_debug("Received commsquality request\n");
364 
365 		qualmsg = (struct p80211msg_lnxreq_commsquality *)msg;
366 
367 		qualmsg->link.status = P80211ENUM_msgitem_status_data_ok;
368 		qualmsg->level.status = P80211ENUM_msgitem_status_data_ok;
369 		qualmsg->noise.status = P80211ENUM_msgitem_status_data_ok;
370 
371 		qualmsg->link.data = le16_to_cpu(hw->qual.cq_curr_bss);
372 		qualmsg->level.data = le16_to_cpu(hw->qual.asl_curr_bss);
373 		qualmsg->noise.data = le16_to_cpu(hw->qual.anl_curr_fc);
374 		qualmsg->txrate.data = hw->txrate;
375 
376 		break;
377 	}
378 	default:
379 		netdev_warn(wlandev->netdev,
380 			    "Unknown mgmt request message 0x%08x",
381 			    msg->msgcode);
382 		break;
383 	}
384 
385 	return result;
386 }
387 
388 /*
389  * prism2sta_ifstate
390  *
391  * Interface state.  This is the primary WLAN interface enable/disable
392  * handler.  Following the driver/load/deviceprobe sequence, this
393  * function must be called with a state of "enable" before any other
394  * commands will be accepted.
395  *
396  * Arguments:
397  *	wlandev		wlan device structure
398  *	msgp		ptr to msg buffer
399  *
400  * Returns:
401  *	A p80211 message resultcode value.
402  *
403  * Side effects:
404  *
405  * Call context:
406  *	process thread  (usually)
407  *	interrupt
408  */
prism2sta_ifstate(struct wlandevice * wlandev,u32 ifstate)409 u32 prism2sta_ifstate(struct wlandevice *wlandev, u32 ifstate)
410 {
411 	struct hfa384x *hw = wlandev->priv;
412 	u32 result;
413 
414 	result = P80211ENUM_resultcode_implementation_failure;
415 
416 	pr_debug("Current MSD state(%d), requesting(%d)\n",
417 		 wlandev->msdstate, ifstate);
418 	switch (ifstate) {
419 	case P80211ENUM_ifstate_fwload:
420 		switch (wlandev->msdstate) {
421 		case WLAN_MSD_HWPRESENT:
422 			wlandev->msdstate = WLAN_MSD_FWLOAD_PENDING;
423 			/*
424 			 * Initialize the device+driver sufficiently
425 			 * for firmware loading.
426 			 */
427 			result = hfa384x_drvr_start(hw);
428 			if (result) {
429 				netdev_err(wlandev->netdev,
430 					   "hfa384x_drvr_start() failed,result=%d\n",
431 					   (int)result);
432 				result =
433 				 P80211ENUM_resultcode_implementation_failure;
434 				wlandev->msdstate = WLAN_MSD_HWPRESENT;
435 				break;
436 			}
437 			wlandev->msdstate = WLAN_MSD_FWLOAD;
438 			result = P80211ENUM_resultcode_success;
439 			break;
440 		case WLAN_MSD_FWLOAD:
441 			hfa384x_cmd_initialize(hw);
442 			result = P80211ENUM_resultcode_success;
443 			break;
444 		case WLAN_MSD_RUNNING:
445 			netdev_warn(wlandev->netdev,
446 				    "Cannot enter fwload state from enable state, you must disable first.\n");
447 			result = P80211ENUM_resultcode_invalid_parameters;
448 			break;
449 		case WLAN_MSD_HWFAIL:
450 		default:
451 			/* probe() had a problem or the msdstate contains
452 			 * an unrecognized value, there's nothing we can do.
453 			 */
454 			result = P80211ENUM_resultcode_implementation_failure;
455 			break;
456 		}
457 		break;
458 	case P80211ENUM_ifstate_enable:
459 		switch (wlandev->msdstate) {
460 		case WLAN_MSD_HWPRESENT:
461 		case WLAN_MSD_FWLOAD:
462 			wlandev->msdstate = WLAN_MSD_RUNNING_PENDING;
463 			/* Initialize the device+driver for full
464 			 * operation. Note that this might me an FWLOAD
465 			 * to RUNNING transition so we must not do a chip
466 			 * or board level reset.  Note that on failure,
467 			 * the MSD state is set to HWPRESENT because we
468 			 * can't make any assumptions about the state
469 			 * of the hardware or a previous firmware load.
470 			 */
471 			result = hfa384x_drvr_start(hw);
472 			if (result) {
473 				netdev_err(wlandev->netdev,
474 					   "hfa384x_drvr_start() failed,result=%d\n",
475 					   (int)result);
476 				result =
477 				  P80211ENUM_resultcode_implementation_failure;
478 				wlandev->msdstate = WLAN_MSD_HWPRESENT;
479 				break;
480 			}
481 
482 			result = prism2sta_getcardinfo(wlandev);
483 			if (result) {
484 				netdev_err(wlandev->netdev,
485 					   "prism2sta_getcardinfo() failed,result=%d\n",
486 					   (int)result);
487 				result =
488 				  P80211ENUM_resultcode_implementation_failure;
489 				hfa384x_drvr_stop(hw);
490 				wlandev->msdstate = WLAN_MSD_HWPRESENT;
491 				break;
492 			}
493 			result = prism2sta_globalsetup(wlandev);
494 			if (result) {
495 				netdev_err(wlandev->netdev,
496 					   "prism2sta_globalsetup() failed,result=%d\n",
497 					   (int)result);
498 				result =
499 				  P80211ENUM_resultcode_implementation_failure;
500 				hfa384x_drvr_stop(hw);
501 				wlandev->msdstate = WLAN_MSD_HWPRESENT;
502 				break;
503 			}
504 			wlandev->msdstate = WLAN_MSD_RUNNING;
505 			hw->join_ap = 0;
506 			hw->join_retries = 60;
507 			result = P80211ENUM_resultcode_success;
508 			break;
509 		case WLAN_MSD_RUNNING:
510 			/* Do nothing, we're already in this state. */
511 			result = P80211ENUM_resultcode_success;
512 			break;
513 		case WLAN_MSD_HWFAIL:
514 		default:
515 			/* probe() had a problem or the msdstate contains
516 			 * an unrecognized value, there's nothing we can do.
517 			 */
518 			result = P80211ENUM_resultcode_implementation_failure;
519 			break;
520 		}
521 		break;
522 	case P80211ENUM_ifstate_disable:
523 		switch (wlandev->msdstate) {
524 		case WLAN_MSD_HWPRESENT:
525 			/* Do nothing, we're already in this state. */
526 			result = P80211ENUM_resultcode_success;
527 			break;
528 		case WLAN_MSD_FWLOAD:
529 		case WLAN_MSD_RUNNING:
530 			wlandev->msdstate = WLAN_MSD_HWPRESENT_PENDING;
531 			/*
532 			 * TODO: Shut down the MAC completely. Here a chip
533 			 * or board level reset is probably called for.
534 			 * After a "disable" _all_ results are lost, even
535 			 * those from a fwload.
536 			 */
537 			if (!wlandev->hwremoved)
538 				netif_carrier_off(wlandev->netdev);
539 
540 			hfa384x_drvr_stop(hw);
541 
542 			wlandev->macmode = WLAN_MACMODE_NONE;
543 			wlandev->msdstate = WLAN_MSD_HWPRESENT;
544 			result = P80211ENUM_resultcode_success;
545 			break;
546 		case WLAN_MSD_HWFAIL:
547 		default:
548 			/* probe() had a problem or the msdstate contains
549 			 * an unrecognized value, there's nothing we can do.
550 			 */
551 			result = P80211ENUM_resultcode_implementation_failure;
552 			break;
553 		}
554 		break;
555 	default:
556 		result = P80211ENUM_resultcode_invalid_parameters;
557 		break;
558 	}
559 
560 	return result;
561 }
562 
563 /*
564  * prism2sta_getcardinfo
565  *
566  * Collect the NICID, firmware version and any other identifiers
567  * we'd like to have in host-side data structures.
568  *
569  * Arguments:
570  *	wlandev		wlan device structure
571  *
572  * Returns:
573  *	0	success
574  *	>0	f/w reported error
575  *	<0	driver reported error
576  *
577  * Side effects:
578  *
579  * Call context:
580  *	Either.
581  */
prism2sta_getcardinfo(struct wlandevice * wlandev)582 static int prism2sta_getcardinfo(struct wlandevice *wlandev)
583 {
584 	int result = 0;
585 	struct hfa384x *hw = wlandev->priv;
586 	u16 temp;
587 	u8 snum[HFA384x_RID_NICSERIALNUMBER_LEN];
588 
589 	/* Collect version and compatibility info */
590 	/*  Some are critical, some are not */
591 	/* NIC identity */
592 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICIDENTITY,
593 					&hw->ident_nic,
594 					sizeof(struct hfa384x_compident));
595 	if (result) {
596 		netdev_err(wlandev->netdev, "Failed to retrieve NICIDENTITY\n");
597 		goto failed;
598 	}
599 
600 	/* get all the nic id fields in host byte order */
601 	le16_to_cpus(&hw->ident_nic.id);
602 	le16_to_cpus(&hw->ident_nic.variant);
603 	le16_to_cpus(&hw->ident_nic.major);
604 	le16_to_cpus(&hw->ident_nic.minor);
605 
606 	netdev_info(wlandev->netdev, "ident: nic h/w: id=0x%02x %d.%d.%d\n",
607 		    hw->ident_nic.id, hw->ident_nic.major,
608 		    hw->ident_nic.minor, hw->ident_nic.variant);
609 
610 	/* Primary f/w identity */
611 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRIIDENTITY,
612 					&hw->ident_pri_fw,
613 					sizeof(struct hfa384x_compident));
614 	if (result) {
615 		netdev_err(wlandev->netdev, "Failed to retrieve PRIIDENTITY\n");
616 		goto failed;
617 	}
618 
619 	/* get all the private fw id fields in host byte order */
620 	le16_to_cpus(&hw->ident_pri_fw.id);
621 	le16_to_cpus(&hw->ident_pri_fw.variant);
622 	le16_to_cpus(&hw->ident_pri_fw.major);
623 	le16_to_cpus(&hw->ident_pri_fw.minor);
624 
625 	netdev_info(wlandev->netdev, "ident: pri f/w: id=0x%02x %d.%d.%d\n",
626 		    hw->ident_pri_fw.id, hw->ident_pri_fw.major,
627 		    hw->ident_pri_fw.minor, hw->ident_pri_fw.variant);
628 
629 	/* Station (Secondary?) f/w identity */
630 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STAIDENTITY,
631 					&hw->ident_sta_fw,
632 					sizeof(struct hfa384x_compident));
633 	if (result) {
634 		netdev_err(wlandev->netdev, "Failed to retrieve STAIDENTITY\n");
635 		goto failed;
636 	}
637 
638 	if (hw->ident_nic.id < 0x8000) {
639 		netdev_err(wlandev->netdev,
640 			   "FATAL: Card is not an Intersil Prism2/2.5/3\n");
641 		result = -1;
642 		goto failed;
643 	}
644 
645 	/* get all the station fw id fields in host byte order */
646 	le16_to_cpus(&hw->ident_sta_fw.id);
647 	le16_to_cpus(&hw->ident_sta_fw.variant);
648 	le16_to_cpus(&hw->ident_sta_fw.major);
649 	le16_to_cpus(&hw->ident_sta_fw.minor);
650 
651 	/* strip out the 'special' variant bits */
652 	hw->mm_mods = hw->ident_sta_fw.variant & GENMASK(15, 14);
653 	hw->ident_sta_fw.variant &= ~((u16)GENMASK(15, 14));
654 
655 	if (hw->ident_sta_fw.id == 0x1f) {
656 		netdev_info(wlandev->netdev,
657 			    "ident: sta f/w: id=0x%02x %d.%d.%d\n",
658 			    hw->ident_sta_fw.id, hw->ident_sta_fw.major,
659 			    hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
660 	} else {
661 		netdev_info(wlandev->netdev,
662 			    "ident:  ap f/w: id=0x%02x %d.%d.%d\n",
663 			    hw->ident_sta_fw.id, hw->ident_sta_fw.major,
664 			    hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
665 		netdev_err(wlandev->netdev, "Unsupported Tertiary AP firmware loaded!\n");
666 		goto failed;
667 	}
668 
669 	/* Compatibility range, Modem supplier */
670 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_MFISUPRANGE,
671 					&hw->cap_sup_mfi,
672 					sizeof(struct hfa384x_caplevel));
673 	if (result) {
674 		netdev_err(wlandev->netdev, "Failed to retrieve MFISUPRANGE\n");
675 		goto failed;
676 	}
677 
678 	/* get all the Compatibility range, modem interface supplier
679 	 * fields in byte order
680 	 */
681 	le16_to_cpus(&hw->cap_sup_mfi.role);
682 	le16_to_cpus(&hw->cap_sup_mfi.id);
683 	le16_to_cpus(&hw->cap_sup_mfi.variant);
684 	le16_to_cpus(&hw->cap_sup_mfi.bottom);
685 	le16_to_cpus(&hw->cap_sup_mfi.top);
686 
687 	netdev_info(wlandev->netdev,
688 		    "MFI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
689 		    hw->cap_sup_mfi.role, hw->cap_sup_mfi.id,
690 		    hw->cap_sup_mfi.variant, hw->cap_sup_mfi.bottom,
691 		    hw->cap_sup_mfi.top);
692 
693 	/* Compatibility range, Controller supplier */
694 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CFISUPRANGE,
695 					&hw->cap_sup_cfi,
696 					sizeof(struct hfa384x_caplevel));
697 	if (result) {
698 		netdev_err(wlandev->netdev, "Failed to retrieve CFISUPRANGE\n");
699 		goto failed;
700 	}
701 
702 	/* get all the Compatibility range, controller interface supplier
703 	 * fields in byte order
704 	 */
705 	le16_to_cpus(&hw->cap_sup_cfi.role);
706 	le16_to_cpus(&hw->cap_sup_cfi.id);
707 	le16_to_cpus(&hw->cap_sup_cfi.variant);
708 	le16_to_cpus(&hw->cap_sup_cfi.bottom);
709 	le16_to_cpus(&hw->cap_sup_cfi.top);
710 
711 	netdev_info(wlandev->netdev,
712 		    "CFI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
713 		    hw->cap_sup_cfi.role, hw->cap_sup_cfi.id,
714 		    hw->cap_sup_cfi.variant, hw->cap_sup_cfi.bottom,
715 		    hw->cap_sup_cfi.top);
716 
717 	/* Compatibility range, Primary f/w supplier */
718 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRISUPRANGE,
719 					&hw->cap_sup_pri,
720 					sizeof(struct hfa384x_caplevel));
721 	if (result) {
722 		netdev_err(wlandev->netdev, "Failed to retrieve PRISUPRANGE\n");
723 		goto failed;
724 	}
725 
726 	/* get all the Compatibility range, primary firmware supplier
727 	 * fields in byte order
728 	 */
729 	le16_to_cpus(&hw->cap_sup_pri.role);
730 	le16_to_cpus(&hw->cap_sup_pri.id);
731 	le16_to_cpus(&hw->cap_sup_pri.variant);
732 	le16_to_cpus(&hw->cap_sup_pri.bottom);
733 	le16_to_cpus(&hw->cap_sup_pri.top);
734 
735 	netdev_info(wlandev->netdev,
736 		    "PRI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
737 		    hw->cap_sup_pri.role, hw->cap_sup_pri.id,
738 		    hw->cap_sup_pri.variant, hw->cap_sup_pri.bottom,
739 		    hw->cap_sup_pri.top);
740 
741 	/* Compatibility range, Station f/w supplier */
742 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STASUPRANGE,
743 					&hw->cap_sup_sta,
744 					sizeof(struct hfa384x_caplevel));
745 	if (result) {
746 		netdev_err(wlandev->netdev, "Failed to retrieve STASUPRANGE\n");
747 		goto failed;
748 	}
749 
750 	/* get all the Compatibility range, station firmware supplier
751 	 * fields in byte order
752 	 */
753 	le16_to_cpus(&hw->cap_sup_sta.role);
754 	le16_to_cpus(&hw->cap_sup_sta.id);
755 	le16_to_cpus(&hw->cap_sup_sta.variant);
756 	le16_to_cpus(&hw->cap_sup_sta.bottom);
757 	le16_to_cpus(&hw->cap_sup_sta.top);
758 
759 	if (hw->cap_sup_sta.id == 0x04) {
760 		netdev_info(wlandev->netdev,
761 			    "STA:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
762 			    hw->cap_sup_sta.role, hw->cap_sup_sta.id,
763 			    hw->cap_sup_sta.variant, hw->cap_sup_sta.bottom,
764 			    hw->cap_sup_sta.top);
765 	} else {
766 		netdev_info(wlandev->netdev,
767 			    "AP:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
768 			    hw->cap_sup_sta.role, hw->cap_sup_sta.id,
769 			    hw->cap_sup_sta.variant, hw->cap_sup_sta.bottom,
770 			    hw->cap_sup_sta.top);
771 	}
772 
773 	/* Compatibility range, primary f/w actor, CFI supplier */
774 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRI_CFIACTRANGES,
775 					&hw->cap_act_pri_cfi,
776 					sizeof(struct hfa384x_caplevel));
777 	if (result) {
778 		netdev_err(wlandev->netdev, "Failed to retrieve PRI_CFIACTRANGES\n");
779 		goto failed;
780 	}
781 
782 	/* get all the Compatibility range, primary f/w actor, CFI supplier
783 	 * fields in byte order
784 	 */
785 	le16_to_cpus(&hw->cap_act_pri_cfi.role);
786 	le16_to_cpus(&hw->cap_act_pri_cfi.id);
787 	le16_to_cpus(&hw->cap_act_pri_cfi.variant);
788 	le16_to_cpus(&hw->cap_act_pri_cfi.bottom);
789 	le16_to_cpus(&hw->cap_act_pri_cfi.top);
790 
791 	netdev_info(wlandev->netdev,
792 		    "PRI-CFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
793 		    hw->cap_act_pri_cfi.role, hw->cap_act_pri_cfi.id,
794 		    hw->cap_act_pri_cfi.variant, hw->cap_act_pri_cfi.bottom,
795 		    hw->cap_act_pri_cfi.top);
796 
797 	/* Compatibility range, sta f/w actor, CFI supplier */
798 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_CFIACTRANGES,
799 					&hw->cap_act_sta_cfi,
800 					sizeof(struct hfa384x_caplevel));
801 	if (result) {
802 		netdev_err(wlandev->netdev, "Failed to retrieve STA_CFIACTRANGES\n");
803 		goto failed;
804 	}
805 
806 	/* get all the Compatibility range, station f/w actor, CFI supplier
807 	 * fields in byte order
808 	 */
809 	le16_to_cpus(&hw->cap_act_sta_cfi.role);
810 	le16_to_cpus(&hw->cap_act_sta_cfi.id);
811 	le16_to_cpus(&hw->cap_act_sta_cfi.variant);
812 	le16_to_cpus(&hw->cap_act_sta_cfi.bottom);
813 	le16_to_cpus(&hw->cap_act_sta_cfi.top);
814 
815 	netdev_info(wlandev->netdev,
816 		    "STA-CFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
817 		    hw->cap_act_sta_cfi.role, hw->cap_act_sta_cfi.id,
818 		    hw->cap_act_sta_cfi.variant, hw->cap_act_sta_cfi.bottom,
819 		    hw->cap_act_sta_cfi.top);
820 
821 	/* Compatibility range, sta f/w actor, MFI supplier */
822 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_MFIACTRANGES,
823 					&hw->cap_act_sta_mfi,
824 					sizeof(struct hfa384x_caplevel));
825 	if (result) {
826 		netdev_err(wlandev->netdev, "Failed to retrieve STA_MFIACTRANGES\n");
827 		goto failed;
828 	}
829 
830 	/* get all the Compatibility range, station f/w actor, MFI supplier
831 	 * fields in byte order
832 	 */
833 	le16_to_cpus(&hw->cap_act_sta_mfi.role);
834 	le16_to_cpus(&hw->cap_act_sta_mfi.id);
835 	le16_to_cpus(&hw->cap_act_sta_mfi.variant);
836 	le16_to_cpus(&hw->cap_act_sta_mfi.bottom);
837 	le16_to_cpus(&hw->cap_act_sta_mfi.top);
838 
839 	netdev_info(wlandev->netdev,
840 		    "STA-MFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
841 		    hw->cap_act_sta_mfi.role, hw->cap_act_sta_mfi.id,
842 		    hw->cap_act_sta_mfi.variant, hw->cap_act_sta_mfi.bottom,
843 		    hw->cap_act_sta_mfi.top);
844 
845 	/* Serial Number */
846 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICSERIALNUMBER,
847 					snum, HFA384x_RID_NICSERIALNUMBER_LEN);
848 	if (!result) {
849 		netdev_info(wlandev->netdev, "Prism2 card SN: %*pE\n",
850 			    HFA384x_RID_NICSERIALNUMBER_LEN, snum);
851 	} else {
852 		netdev_err(wlandev->netdev, "Failed to retrieve Prism2 Card SN\n");
853 		goto failed;
854 	}
855 
856 	/* Collect the MAC address */
857 	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFOWNMACADDR,
858 					wlandev->netdev->dev_addr, ETH_ALEN);
859 	if (result != 0) {
860 		netdev_err(wlandev->netdev, "Failed to retrieve mac address\n");
861 		goto failed;
862 	}
863 
864 	/* short preamble is always implemented */
865 	wlandev->nsdcaps |= P80211_NSDCAP_SHORT_PREAMBLE;
866 
867 	/* find out if hardware wep is implemented */
868 	hfa384x_drvr_getconfig16(hw, HFA384x_RID_PRIVACYOPTIMP, &temp);
869 	if (temp)
870 		wlandev->nsdcaps |= P80211_NSDCAP_HARDWAREWEP;
871 
872 	/* get the dBm Scaling constant */
873 	hfa384x_drvr_getconfig16(hw, HFA384x_RID_CNFDBMADJUST, &temp);
874 	hw->dbmadjust = temp;
875 
876 	/* Only enable scan by default on newer firmware */
877 	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
878 				     hw->ident_sta_fw.minor,
879 				     hw->ident_sta_fw.variant) <
880 	    HFA384x_FIRMWARE_VERSION(1, 5, 5)) {
881 		wlandev->nsdcaps |= P80211_NSDCAP_NOSCAN;
882 	}
883 
884 	/* TODO: Set any internally managed config items */
885 
886 	goto done;
887 failed:
888 	netdev_err(wlandev->netdev, "Failed, result=%d\n", result);
889 done:
890 	return result;
891 }
892 
893 /*
894  * prism2sta_globalsetup
895  *
896  * Set any global RIDs that we want to set at device activation.
897  *
898  * Arguments:
899  *	wlandev		wlan device structure
900  *
901  * Returns:
902  *	0	success
903  *	>0	f/w reported error
904  *	<0	driver reported error
905  *
906  * Side effects:
907  *
908  * Call context:
909  *	process thread
910  */
prism2sta_globalsetup(struct wlandevice * wlandev)911 static int prism2sta_globalsetup(struct wlandevice *wlandev)
912 {
913 	struct hfa384x *hw = wlandev->priv;
914 
915 	/* Set the maximum frame size */
916 	return hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN,
917 					WLAN_DATA_MAXLEN);
918 }
919 
prism2sta_setmulticast(struct wlandevice * wlandev,struct net_device * dev)920 static int prism2sta_setmulticast(struct wlandevice *wlandev,
921 				  struct net_device *dev)
922 {
923 	int result = 0;
924 	struct hfa384x *hw = wlandev->priv;
925 
926 	u16 promisc;
927 
928 	/* If we're not ready, what's the point? */
929 	if (hw->state != HFA384x_STATE_RUNNING)
930 		goto exit;
931 
932 	if ((dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0)
933 		promisc = P80211ENUM_truth_true;
934 	else
935 		promisc = P80211ENUM_truth_false;
936 
937 	result =
938 	    hfa384x_drvr_setconfig16_async(hw, HFA384x_RID_PROMISCMODE,
939 					   promisc);
940 exit:
941 	return result;
942 }
943 
944 /*
945  * prism2sta_inf_handover
946  *
947  * Handles the receipt of a Handover info frame. Should only be present
948  * in APs only.
949  *
950  * Arguments:
951  *	wlandev		wlan device structure
952  *	inf		ptr to info frame (contents in hfa384x order)
953  *
954  * Returns:
955  *	nothing
956  *
957  * Side effects:
958  *
959  * Call context:
960  *	interrupt
961  */
prism2sta_inf_handover(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)962 static void prism2sta_inf_handover(struct wlandevice *wlandev,
963 				   struct hfa384x_inf_frame *inf)
964 {
965 	pr_debug("received infoframe:HANDOVER (unhandled)\n");
966 }
967 
968 /*
969  * prism2sta_inf_tallies
970  *
971  * Handles the receipt of a CommTallies info frame.
972  *
973  * Arguments:
974  *	wlandev		wlan device structure
975  *	inf		ptr to info frame (contents in hfa384x order)
976  *
977  * Returns:
978  *	nothing
979  *
980  * Side effects:
981  *
982  * Call context:
983  *	interrupt
984  */
prism2sta_inf_tallies(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)985 static void prism2sta_inf_tallies(struct wlandevice *wlandev,
986 				  struct hfa384x_inf_frame *inf)
987 {
988 	struct hfa384x *hw = wlandev->priv;
989 	__le16 *src16;
990 	u32 *dst;
991 	__le32 *src32;
992 	int i;
993 	int cnt;
994 
995 	/*
996 	 * Determine if these are 16-bit or 32-bit tallies, based on the
997 	 * record length of the info record.
998 	 */
999 
1000 	cnt = sizeof(struct hfa384x_comm_tallies_32) / sizeof(u32);
1001 	if (inf->framelen > 22) {
1002 		dst = (u32 *)&hw->tallies;
1003 		src32 = (__le32 *)&inf->info.commtallies32;
1004 		for (i = 0; i < cnt; i++, dst++, src32++)
1005 			*dst += le32_to_cpu(*src32);
1006 	} else {
1007 		dst = (u32 *)&hw->tallies;
1008 		src16 = (__le16 *)&inf->info.commtallies16;
1009 		for (i = 0; i < cnt; i++, dst++, src16++)
1010 			*dst += le16_to_cpu(*src16);
1011 	}
1012 }
1013 
1014 /*
1015  * prism2sta_inf_scanresults
1016  *
1017  * Handles the receipt of a Scan Results info frame.
1018  *
1019  * Arguments:
1020  *	wlandev		wlan device structure
1021  *	inf		ptr to info frame (contents in hfa384x order)
1022  *
1023  * Returns:
1024  *	nothing
1025  *
1026  * Side effects:
1027  *
1028  * Call context:
1029  *	interrupt
1030  */
prism2sta_inf_scanresults(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1031 static void prism2sta_inf_scanresults(struct wlandevice *wlandev,
1032 				      struct hfa384x_inf_frame *inf)
1033 {
1034 	struct hfa384x *hw = wlandev->priv;
1035 	int nbss;
1036 	struct hfa384x_scan_result *sr = &inf->info.scanresult;
1037 	int i;
1038 	struct hfa384x_join_request_data joinreq;
1039 	int result;
1040 
1041 	/* Get the number of results, first in bytes, then in results */
1042 	nbss = (inf->framelen * sizeof(u16)) -
1043 	    sizeof(inf->infotype) - sizeof(inf->info.scanresult.scanreason);
1044 	nbss /= sizeof(struct hfa384x_scan_result_sub);
1045 
1046 	/* Print em */
1047 	pr_debug("rx scanresults, reason=%d, nbss=%d:\n",
1048 		 inf->info.scanresult.scanreason, nbss);
1049 	for (i = 0; i < nbss; i++) {
1050 		pr_debug("chid=%d anl=%d sl=%d bcnint=%d\n",
1051 			 sr->result[i].chid,
1052 			 sr->result[i].anl,
1053 			 sr->result[i].sl, sr->result[i].bcnint);
1054 		pr_debug("  capinfo=0x%04x proberesp_rate=%d\n",
1055 			 sr->result[i].capinfo, sr->result[i].proberesp_rate);
1056 	}
1057 	/* issue a join request */
1058 	joinreq.channel = sr->result[0].chid;
1059 	memcpy(joinreq.bssid, sr->result[0].bssid, WLAN_BSSID_LEN);
1060 	result = hfa384x_drvr_setconfig(hw,
1061 					HFA384x_RID_JOINREQUEST,
1062 					&joinreq, HFA384x_RID_JOINREQUEST_LEN);
1063 	if (result) {
1064 		netdev_err(wlandev->netdev, "setconfig(joinreq) failed, result=%d\n",
1065 			   result);
1066 	}
1067 }
1068 
1069 /*
1070  * prism2sta_inf_hostscanresults
1071  *
1072  * Handles the receipt of a Scan Results info frame.
1073  *
1074  * Arguments:
1075  *	wlandev		wlan device structure
1076  *	inf		ptr to info frame (contents in hfa384x order)
1077  *
1078  * Returns:
1079  *	nothing
1080  *
1081  * Side effects:
1082  *
1083  * Call context:
1084  *	interrupt
1085  */
prism2sta_inf_hostscanresults(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1086 static void prism2sta_inf_hostscanresults(struct wlandevice *wlandev,
1087 					  struct hfa384x_inf_frame *inf)
1088 {
1089 	struct hfa384x *hw = wlandev->priv;
1090 	int nbss;
1091 
1092 	nbss = (inf->framelen - 3) / 32;
1093 	pr_debug("Received %d hostscan results\n", nbss);
1094 
1095 	if (nbss > 32)
1096 		nbss = 32;
1097 
1098 	kfree(hw->scanresults);
1099 
1100 	hw->scanresults = kmemdup(inf, sizeof(*inf), GFP_ATOMIC);
1101 
1102 	if (nbss == 0)
1103 		nbss = -1;
1104 
1105 	/* Notify/wake the sleeping caller. */
1106 	hw->scanflag = nbss;
1107 	wake_up_interruptible(&hw->cmdq);
1108 };
1109 
1110 /*
1111  * prism2sta_inf_chinforesults
1112  *
1113  * Handles the receipt of a Channel Info Results info frame.
1114  *
1115  * Arguments:
1116  *	wlandev		wlan device structure
1117  *	inf		ptr to info frame (contents in hfa384x order)
1118  *
1119  * Returns:
1120  *	nothing
1121  *
1122  * Side effects:
1123  *
1124  * Call context:
1125  *	interrupt
1126  */
prism2sta_inf_chinforesults(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1127 static void prism2sta_inf_chinforesults(struct wlandevice *wlandev,
1128 					struct hfa384x_inf_frame *inf)
1129 {
1130 	struct hfa384x *hw = wlandev->priv;
1131 	unsigned int i, n;
1132 
1133 	hw->channel_info.results.scanchannels =
1134 	    inf->info.chinforesult.scanchannels;
1135 
1136 	for (i = 0, n = 0; i < HFA384x_CHINFORESULT_MAX; i++) {
1137 		struct hfa384x_ch_info_result_sub *result;
1138 		struct hfa384x_ch_info_result_sub *chinforesult;
1139 		int chan;
1140 
1141 		if (!(hw->channel_info.results.scanchannels & (1 << i)))
1142 			continue;
1143 
1144 		result = &inf->info.chinforesult.result[n];
1145 		chan = result->chid - 1;
1146 
1147 		if (chan < 0 || chan >= HFA384x_CHINFORESULT_MAX)
1148 			continue;
1149 
1150 		chinforesult = &hw->channel_info.results.result[chan];
1151 		chinforesult->chid = chan;
1152 		chinforesult->anl = result->anl;
1153 		chinforesult->pnl = result->pnl;
1154 		chinforesult->active = result->active;
1155 
1156 		pr_debug("chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
1157 			 chan + 1,
1158 			 (chinforesult->active & HFA384x_CHINFORESULT_BSSACTIVE)
1159 				? "signal" : "noise",
1160 			 chinforesult->anl, chinforesult->pnl,
1161 			 (chinforesult->active & HFA384x_CHINFORESULT_PCFACTIVE)
1162 				? 1 : 0);
1163 		n++;
1164 	}
1165 	atomic_set(&hw->channel_info.done, 2);
1166 
1167 	hw->channel_info.count = n;
1168 }
1169 
prism2sta_processing_defer(struct work_struct * data)1170 void prism2sta_processing_defer(struct work_struct *data)
1171 {
1172 	struct hfa384x *hw = container_of(data, struct hfa384x, link_bh);
1173 	struct wlandevice *wlandev = hw->wlandev;
1174 	struct hfa384x_bytestr32 ssid;
1175 	int result;
1176 
1177 	/* First let's process the auth frames */
1178 	{
1179 		struct sk_buff *skb;
1180 		struct hfa384x_inf_frame *inf;
1181 
1182 		while ((skb = skb_dequeue(&hw->authq))) {
1183 			inf = (struct hfa384x_inf_frame *)skb->data;
1184 			prism2sta_inf_authreq_defer(wlandev, inf);
1185 		}
1186 	}
1187 
1188 	/* Now let's handle the linkstatus stuff */
1189 	if (hw->link_status == hw->link_status_new)
1190 		return;
1191 
1192 	hw->link_status = hw->link_status_new;
1193 
1194 	switch (hw->link_status) {
1195 	case HFA384x_LINK_NOTCONNECTED:
1196 		/* I'm currently assuming that this is the initial link
1197 		 * state.  It should only be possible immediately
1198 		 * following an Enable command.
1199 		 * Response:
1200 		 * Block Transmits, Ignore receives of data frames
1201 		 */
1202 		netif_carrier_off(wlandev->netdev);
1203 
1204 		netdev_info(wlandev->netdev, "linkstatus=NOTCONNECTED (unhandled)\n");
1205 		break;
1206 
1207 	case HFA384x_LINK_CONNECTED:
1208 		/* This one indicates a successful scan/join/auth/assoc.
1209 		 * When we have the full MLME complement, this event will
1210 		 * signify successful completion of both mlme_authenticate
1211 		 * and mlme_associate.  State management will get a little
1212 		 * ugly here.
1213 		 * Response:
1214 		 * Indicate authentication and/or association
1215 		 * Enable Transmits, Receives and pass up data frames
1216 		 */
1217 
1218 		netif_carrier_on(wlandev->netdev);
1219 
1220 		/* If we are joining a specific AP, set our
1221 		 * state and reset retries
1222 		 */
1223 		if (hw->join_ap == 1)
1224 			hw->join_ap = 2;
1225 		hw->join_retries = 60;
1226 
1227 		/* Don't call this in monitor mode */
1228 		if (wlandev->netdev->type == ARPHRD_ETHER) {
1229 			u16 portstatus;
1230 
1231 			netdev_info(wlandev->netdev, "linkstatus=CONNECTED\n");
1232 
1233 			/* For non-usb devices, we can use the sync versions */
1234 			/* Collect the BSSID, and set state to allow tx */
1235 
1236 			result = hfa384x_drvr_getconfig(hw,
1237 							HFA384x_RID_CURRENTBSSID,
1238 							wlandev->bssid,
1239 							WLAN_BSSID_LEN);
1240 			if (result) {
1241 				pr_debug
1242 				    ("getconfig(0x%02x) failed, result = %d\n",
1243 				     HFA384x_RID_CURRENTBSSID, result);
1244 				return;
1245 			}
1246 
1247 			result = hfa384x_drvr_getconfig(hw,
1248 							HFA384x_RID_CURRENTSSID,
1249 							&ssid, sizeof(ssid));
1250 			if (result) {
1251 				pr_debug
1252 				    ("getconfig(0x%02x) failed, result = %d\n",
1253 				     HFA384x_RID_CURRENTSSID, result);
1254 				return;
1255 			}
1256 			prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *)&ssid,
1257 						(struct p80211pstrd *)&wlandev->ssid);
1258 
1259 			/* Collect the port status */
1260 			result = hfa384x_drvr_getconfig16(hw,
1261 							  HFA384x_RID_PORTSTATUS,
1262 							  &portstatus);
1263 			if (result) {
1264 				pr_debug
1265 				    ("getconfig(0x%02x) failed, result = %d\n",
1266 				     HFA384x_RID_PORTSTATUS, result);
1267 				return;
1268 			}
1269 			wlandev->macmode =
1270 			    (portstatus == HFA384x_PSTATUS_CONN_IBSS) ?
1271 			    WLAN_MACMODE_IBSS_STA : WLAN_MACMODE_ESS_STA;
1272 
1273 			/* signal back up to cfg80211 layer */
1274 			prism2_connect_result(wlandev, P80211ENUM_truth_false);
1275 
1276 			/* Get the ball rolling on the comms quality stuff */
1277 			prism2sta_commsqual_defer(&hw->commsqual_bh);
1278 		}
1279 		break;
1280 
1281 	case HFA384x_LINK_DISCONNECTED:
1282 		/* This one indicates that our association is gone.  We've
1283 		 * lost connection with the AP and/or been disassociated.
1284 		 * This indicates that the MAC has completely cleared it's
1285 		 * associated state.  We * should send a deauth indication
1286 		 * (implying disassoc) up * to the MLME.
1287 		 * Response:
1288 		 * Indicate Deauthentication
1289 		 * Block Transmits, Ignore receives of data frames
1290 		 */
1291 		if (wlandev->netdev->type == ARPHRD_ETHER)
1292 			netdev_info(wlandev->netdev,
1293 				    "linkstatus=DISCONNECTED (unhandled)\n");
1294 		wlandev->macmode = WLAN_MACMODE_NONE;
1295 
1296 		netif_carrier_off(wlandev->netdev);
1297 
1298 		/* signal back up to cfg80211 layer */
1299 		prism2_disconnected(wlandev);
1300 
1301 		break;
1302 
1303 	case HFA384x_LINK_AP_CHANGE:
1304 		/* This one indicates that the MAC has decided to and
1305 		 * successfully completed a change to another AP.  We
1306 		 * should probably implement a reassociation indication
1307 		 * in response to this one.  I'm thinking that the
1308 		 * p80211 layer needs to be notified in case of
1309 		 * buffering/queueing issues.  User mode also needs to be
1310 		 * notified so that any BSS dependent elements can be
1311 		 * updated.
1312 		 * associated state.  We * should send a deauth indication
1313 		 * (implying disassoc) up * to the MLME.
1314 		 * Response:
1315 		 * Indicate Reassociation
1316 		 * Enable Transmits, Receives and pass up data frames
1317 		 */
1318 		netdev_info(wlandev->netdev, "linkstatus=AP_CHANGE\n");
1319 
1320 		result = hfa384x_drvr_getconfig(hw,
1321 						HFA384x_RID_CURRENTBSSID,
1322 						wlandev->bssid, WLAN_BSSID_LEN);
1323 		if (result) {
1324 			pr_debug("getconfig(0x%02x) failed, result = %d\n",
1325 				 HFA384x_RID_CURRENTBSSID, result);
1326 			return;
1327 		}
1328 
1329 		result = hfa384x_drvr_getconfig(hw,
1330 						HFA384x_RID_CURRENTSSID,
1331 						&ssid, sizeof(ssid));
1332 		if (result) {
1333 			pr_debug("getconfig(0x%02x) failed, result = %d\n",
1334 				 HFA384x_RID_CURRENTSSID, result);
1335 			return;
1336 		}
1337 		prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *)&ssid,
1338 					(struct p80211pstrd *)&wlandev->ssid);
1339 
1340 		hw->link_status = HFA384x_LINK_CONNECTED;
1341 		netif_carrier_on(wlandev->netdev);
1342 
1343 		/* signal back up to cfg80211 layer */
1344 		prism2_roamed(wlandev);
1345 
1346 		break;
1347 
1348 	case HFA384x_LINK_AP_OUTOFRANGE:
1349 		/* This one indicates that the MAC has decided that the
1350 		 * AP is out of range, but hasn't found a better candidate
1351 		 * so the MAC maintains its "associated" state in case
1352 		 * we get back in range.  We should block transmits and
1353 		 * receives in this state.  Do we need an indication here?
1354 		 * Probably not since a polling user-mode element would
1355 		 * get this status from p2PortStatus(FD40). What about
1356 		 * p80211?
1357 		 * Response:
1358 		 * Block Transmits, Ignore receives of data frames
1359 		 */
1360 		netdev_info(wlandev->netdev, "linkstatus=AP_OUTOFRANGE (unhandled)\n");
1361 
1362 		netif_carrier_off(wlandev->netdev);
1363 
1364 		break;
1365 
1366 	case HFA384x_LINK_AP_INRANGE:
1367 		/* This one indicates that the MAC has decided that the
1368 		 * AP is back in range.  We continue working with our
1369 		 * existing association.
1370 		 * Response:
1371 		 * Enable Transmits, Receives and pass up data frames
1372 		 */
1373 		netdev_info(wlandev->netdev, "linkstatus=AP_INRANGE\n");
1374 
1375 		hw->link_status = HFA384x_LINK_CONNECTED;
1376 		netif_carrier_on(wlandev->netdev);
1377 
1378 		break;
1379 
1380 	case HFA384x_LINK_ASSOCFAIL:
1381 		/* This one is actually a peer to CONNECTED.  We've
1382 		 * requested a join for a given SSID and optionally BSSID.
1383 		 * We can use this one to indicate authentication and
1384 		 * association failures.  The trick is going to be
1385 		 * 1) identifying the failure, and 2) state management.
1386 		 * Response:
1387 		 * Disable Transmits, Ignore receives of data frames
1388 		 */
1389 		if (hw->join_ap && --hw->join_retries > 0) {
1390 			struct hfa384x_join_request_data joinreq;
1391 
1392 			joinreq = hw->joinreq;
1393 			/* Send the join request */
1394 			hfa384x_drvr_setconfig(hw,
1395 					       HFA384x_RID_JOINREQUEST,
1396 					       &joinreq,
1397 					       HFA384x_RID_JOINREQUEST_LEN);
1398 			netdev_info(wlandev->netdev,
1399 				    "linkstatus=ASSOCFAIL (re-submitting join)\n");
1400 		} else {
1401 			netdev_info(wlandev->netdev, "linkstatus=ASSOCFAIL (unhandled)\n");
1402 		}
1403 
1404 		netif_carrier_off(wlandev->netdev);
1405 
1406 		/* signal back up to cfg80211 layer */
1407 		prism2_connect_result(wlandev, P80211ENUM_truth_true);
1408 
1409 		break;
1410 
1411 	default:
1412 		/* This is bad, IO port problems? */
1413 		netdev_warn(wlandev->netdev,
1414 			    "unknown linkstatus=0x%02x\n", hw->link_status);
1415 		return;
1416 	}
1417 
1418 	wlandev->linkstatus = (hw->link_status == HFA384x_LINK_CONNECTED);
1419 }
1420 
1421 /*
1422  * prism2sta_inf_linkstatus
1423  *
1424  * Handles the receipt of a Link Status info frame.
1425  *
1426  * Arguments:
1427  *	wlandev		wlan device structure
1428  *	inf		ptr to info frame (contents in hfa384x order)
1429  *
1430  * Returns:
1431  *	nothing
1432  *
1433  * Side effects:
1434  *
1435  * Call context:
1436  *	interrupt
1437  */
prism2sta_inf_linkstatus(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1438 static void prism2sta_inf_linkstatus(struct wlandevice *wlandev,
1439 				     struct hfa384x_inf_frame *inf)
1440 {
1441 	struct hfa384x *hw = wlandev->priv;
1442 
1443 	hw->link_status_new = le16_to_cpu(inf->info.linkstatus.linkstatus);
1444 
1445 	schedule_work(&hw->link_bh);
1446 }
1447 
1448 /*
1449  * prism2sta_inf_assocstatus
1450  *
1451  * Handles the receipt of an Association Status info frame. Should
1452  * be present in APs only.
1453  *
1454  * Arguments:
1455  *	wlandev		wlan device structure
1456  *	inf		ptr to info frame (contents in hfa384x order)
1457  *
1458  * Returns:
1459  *	nothing
1460  *
1461  * Side effects:
1462  *
1463  * Call context:
1464  *	interrupt
1465  */
prism2sta_inf_assocstatus(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1466 static void prism2sta_inf_assocstatus(struct wlandevice *wlandev,
1467 				      struct hfa384x_inf_frame *inf)
1468 {
1469 	struct hfa384x *hw = wlandev->priv;
1470 	struct hfa384x_assoc_status rec;
1471 	int i;
1472 
1473 	memcpy(&rec, &inf->info.assocstatus, sizeof(rec));
1474 	le16_to_cpus(&rec.assocstatus);
1475 	le16_to_cpus(&rec.reason);
1476 
1477 	/*
1478 	 * Find the address in the list of authenticated stations.
1479 	 * If it wasn't found, then this address has not been previously
1480 	 * authenticated and something weird has happened if this is
1481 	 * anything other than an "authentication failed" message.
1482 	 * If the address was found, then set the "associated" flag for
1483 	 * that station, based on whether the station is associating or
1484 	 * losing its association.  Something weird has also happened
1485 	 * if we find the address in the list of authenticated stations
1486 	 * but we are getting an "authentication failed" message.
1487 	 */
1488 
1489 	for (i = 0; i < hw->authlist.cnt; i++)
1490 		if (ether_addr_equal(rec.sta_addr, hw->authlist.addr[i]))
1491 			break;
1492 
1493 	if (i >= hw->authlist.cnt) {
1494 		if (rec.assocstatus != HFA384x_ASSOCSTATUS_AUTHFAIL)
1495 			netdev_warn(wlandev->netdev,
1496 				    "assocstatus info frame received for non-authenticated station.\n");
1497 	} else {
1498 		hw->authlist.assoc[i] =
1499 		    (rec.assocstatus == HFA384x_ASSOCSTATUS_STAASSOC ||
1500 		     rec.assocstatus == HFA384x_ASSOCSTATUS_REASSOC);
1501 
1502 		if (rec.assocstatus == HFA384x_ASSOCSTATUS_AUTHFAIL)
1503 			netdev_warn(wlandev->netdev,
1504 				    "authfail assocstatus info frame received for authenticated station.\n");
1505 	}
1506 }
1507 
1508 /*
1509  * prism2sta_inf_authreq
1510  *
1511  * Handles the receipt of an Authentication Request info frame. Should
1512  * be present in APs only.
1513  *
1514  * Arguments:
1515  *	wlandev		wlan device structure
1516  *	inf		ptr to info frame (contents in hfa384x order)
1517  *
1518  * Returns:
1519  *	nothing
1520  *
1521  * Side effects:
1522  *
1523  * Call context:
1524  *	interrupt
1525  *
1526  */
prism2sta_inf_authreq(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1527 static void prism2sta_inf_authreq(struct wlandevice *wlandev,
1528 				  struct hfa384x_inf_frame *inf)
1529 {
1530 	struct hfa384x *hw = wlandev->priv;
1531 	struct sk_buff *skb;
1532 
1533 	skb = dev_alloc_skb(sizeof(*inf));
1534 	if (skb) {
1535 		skb_put(skb, sizeof(*inf));
1536 		memcpy(skb->data, inf, sizeof(*inf));
1537 		skb_queue_tail(&hw->authq, skb);
1538 		schedule_work(&hw->link_bh);
1539 	}
1540 }
1541 
prism2sta_inf_authreq_defer(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1542 static void prism2sta_inf_authreq_defer(struct wlandevice *wlandev,
1543 					struct hfa384x_inf_frame *inf)
1544 {
1545 	struct hfa384x *hw = wlandev->priv;
1546 	struct hfa384x_authenticate_station_data rec;
1547 
1548 	int i, added, result, cnt;
1549 	u8 *addr;
1550 
1551 	/*
1552 	 * Build the AuthenticateStation record.  Initialize it for denying
1553 	 * authentication.
1554 	 */
1555 
1556 	ether_addr_copy(rec.address, inf->info.authreq.sta_addr);
1557 	rec.status = cpu_to_le16(P80211ENUM_status_unspec_failure);
1558 
1559 	/*
1560 	 * Authenticate based on the access mode.
1561 	 */
1562 
1563 	switch (hw->accessmode) {
1564 	case WLAN_ACCESS_NONE:
1565 
1566 		/*
1567 		 * Deny all new authentications.  However, if a station
1568 		 * is ALREADY authenticated, then accept it.
1569 		 */
1570 
1571 		for (i = 0; i < hw->authlist.cnt; i++)
1572 			if (ether_addr_equal(rec.address,
1573 					     hw->authlist.addr[i])) {
1574 				rec.status = cpu_to_le16(P80211ENUM_status_successful);
1575 				break;
1576 			}
1577 
1578 		break;
1579 
1580 	case WLAN_ACCESS_ALL:
1581 
1582 		/*
1583 		 * Allow all authentications.
1584 		 */
1585 
1586 		rec.status = cpu_to_le16(P80211ENUM_status_successful);
1587 		break;
1588 
1589 	case WLAN_ACCESS_ALLOW:
1590 
1591 		/*
1592 		 * Only allow the authentication if the MAC address
1593 		 * is in the list of allowed addresses.
1594 		 *
1595 		 * Since this is the interrupt handler, we may be here
1596 		 * while the access list is in the middle of being
1597 		 * updated.  Choose the list which is currently okay.
1598 		 * See "prism2mib_priv_accessallow()" for details.
1599 		 */
1600 
1601 		if (hw->allow.modify == 0) {
1602 			cnt = hw->allow.cnt;
1603 			addr = hw->allow.addr[0];
1604 		} else {
1605 			cnt = hw->allow.cnt1;
1606 			addr = hw->allow.addr1[0];
1607 		}
1608 
1609 		for (i = 0; i < cnt; i++, addr += ETH_ALEN)
1610 			if (ether_addr_equal(rec.address, addr)) {
1611 				rec.status = cpu_to_le16(P80211ENUM_status_successful);
1612 				break;
1613 			}
1614 
1615 		break;
1616 
1617 	case WLAN_ACCESS_DENY:
1618 
1619 		/*
1620 		 * Allow the authentication UNLESS the MAC address is
1621 		 * in the list of denied addresses.
1622 		 *
1623 		 * Since this is the interrupt handler, we may be here
1624 		 * while the access list is in the middle of being
1625 		 * updated.  Choose the list which is currently okay.
1626 		 * See "prism2mib_priv_accessdeny()" for details.
1627 		 */
1628 
1629 		if (hw->deny.modify == 0) {
1630 			cnt = hw->deny.cnt;
1631 			addr = hw->deny.addr[0];
1632 		} else {
1633 			cnt = hw->deny.cnt1;
1634 			addr = hw->deny.addr1[0];
1635 		}
1636 
1637 		rec.status = cpu_to_le16(P80211ENUM_status_successful);
1638 
1639 		for (i = 0; i < cnt; i++, addr += ETH_ALEN)
1640 			if (ether_addr_equal(rec.address, addr)) {
1641 				rec.status = cpu_to_le16(P80211ENUM_status_unspec_failure);
1642 				break;
1643 			}
1644 
1645 		break;
1646 	}
1647 
1648 	/*
1649 	 * If the authentication is okay, then add the MAC address to the
1650 	 * list of authenticated stations.  Don't add the address if it
1651 	 * is already in the list. (802.11b does not seem to disallow
1652 	 * a station from issuing an authentication request when the
1653 	 * station is already authenticated. Does this sort of thing
1654 	 * ever happen?  We might as well do the check just in case.)
1655 	 */
1656 
1657 	added = 0;
1658 
1659 	if (rec.status == cpu_to_le16(P80211ENUM_status_successful)) {
1660 		for (i = 0; i < hw->authlist.cnt; i++)
1661 			if (ether_addr_equal(rec.address,
1662 					     hw->authlist.addr[i]))
1663 				break;
1664 
1665 		if (i >= hw->authlist.cnt) {
1666 			if (hw->authlist.cnt >= WLAN_AUTH_MAX) {
1667 				rec.status = cpu_to_le16(P80211ENUM_status_ap_full);
1668 			} else {
1669 				ether_addr_copy(hw->authlist.addr[hw->authlist.cnt],
1670 						rec.address);
1671 				hw->authlist.cnt++;
1672 				added = 1;
1673 			}
1674 		}
1675 	}
1676 
1677 	/*
1678 	 * Send back the results of the authentication.  If this doesn't work,
1679 	 * then make sure to remove the address from the authenticated list if
1680 	 * it was added.
1681 	 */
1682 
1683 	rec.algorithm = inf->info.authreq.algorithm;
1684 
1685 	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_AUTHENTICATESTA,
1686 					&rec, sizeof(rec));
1687 	if (result) {
1688 		if (added)
1689 			hw->authlist.cnt--;
1690 		netdev_err(wlandev->netdev,
1691 			   "setconfig(authenticatestation) failed, result=%d\n",
1692 			   result);
1693 	}
1694 }
1695 
1696 /*
1697  * prism2sta_inf_psusercnt
1698  *
1699  * Handles the receipt of a PowerSaveUserCount info frame. Should
1700  * be present in APs only.
1701  *
1702  * Arguments:
1703  *	wlandev		wlan device structure
1704  *	inf		ptr to info frame (contents in hfa384x order)
1705  *
1706  * Returns:
1707  *	nothing
1708  *
1709  * Side effects:
1710  *
1711  * Call context:
1712  *	interrupt
1713  */
prism2sta_inf_psusercnt(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1714 static void prism2sta_inf_psusercnt(struct wlandevice *wlandev,
1715 				    struct hfa384x_inf_frame *inf)
1716 {
1717 	struct hfa384x *hw = wlandev->priv;
1718 
1719 	hw->psusercount = le16_to_cpu(inf->info.psusercnt.usercnt);
1720 }
1721 
1722 /*
1723  * prism2sta_ev_info
1724  *
1725  * Handles the Info event.
1726  *
1727  * Arguments:
1728  *	wlandev		wlan device structure
1729  *	inf		ptr to a generic info frame
1730  *
1731  * Returns:
1732  *	nothing
1733  *
1734  * Side effects:
1735  *
1736  * Call context:
1737  *	interrupt
1738  */
prism2sta_ev_info(struct wlandevice * wlandev,struct hfa384x_inf_frame * inf)1739 void prism2sta_ev_info(struct wlandevice *wlandev,
1740 		       struct hfa384x_inf_frame *inf)
1741 {
1742 	le16_to_cpus(&inf->infotype);
1743 	/* Dispatch */
1744 	switch (inf->infotype) {
1745 	case HFA384x_IT_HANDOVERADDR:
1746 		prism2sta_inf_handover(wlandev, inf);
1747 		break;
1748 	case HFA384x_IT_COMMTALLIES:
1749 		prism2sta_inf_tallies(wlandev, inf);
1750 		break;
1751 	case HFA384x_IT_HOSTSCANRESULTS:
1752 		prism2sta_inf_hostscanresults(wlandev, inf);
1753 		break;
1754 	case HFA384x_IT_SCANRESULTS:
1755 		prism2sta_inf_scanresults(wlandev, inf);
1756 		break;
1757 	case HFA384x_IT_CHINFORESULTS:
1758 		prism2sta_inf_chinforesults(wlandev, inf);
1759 		break;
1760 	case HFA384x_IT_LINKSTATUS:
1761 		prism2sta_inf_linkstatus(wlandev, inf);
1762 		break;
1763 	case HFA384x_IT_ASSOCSTATUS:
1764 		prism2sta_inf_assocstatus(wlandev, inf);
1765 		break;
1766 	case HFA384x_IT_AUTHREQ:
1767 		prism2sta_inf_authreq(wlandev, inf);
1768 		break;
1769 	case HFA384x_IT_PSUSERCNT:
1770 		prism2sta_inf_psusercnt(wlandev, inf);
1771 		break;
1772 	case HFA384x_IT_KEYIDCHANGED:
1773 		netdev_warn(wlandev->netdev, "Unhandled IT_KEYIDCHANGED\n");
1774 		break;
1775 	case HFA384x_IT_ASSOCREQ:
1776 		netdev_warn(wlandev->netdev, "Unhandled IT_ASSOCREQ\n");
1777 		break;
1778 	case HFA384x_IT_MICFAILURE:
1779 		netdev_warn(wlandev->netdev, "Unhandled IT_MICFAILURE\n");
1780 		break;
1781 	default:
1782 		netdev_warn(wlandev->netdev,
1783 			    "Unknown info type=0x%02x\n", inf->infotype);
1784 		break;
1785 	}
1786 }
1787 
1788 /*
1789  * prism2sta_ev_txexc
1790  *
1791  * Handles the TxExc event.  A Transmit Exception event indicates
1792  * that the MAC's TX process was unsuccessful - so the packet did
1793  * not get transmitted.
1794  *
1795  * Arguments:
1796  *	wlandev		wlan device structure
1797  *	status		tx frame status word
1798  *
1799  * Returns:
1800  *	nothing
1801  *
1802  * Side effects:
1803  *
1804  * Call context:
1805  *	interrupt
1806  */
prism2sta_ev_txexc(struct wlandevice * wlandev,u16 status)1807 void prism2sta_ev_txexc(struct wlandevice *wlandev, u16 status)
1808 {
1809 	pr_debug("TxExc status=0x%x.\n", status);
1810 }
1811 
1812 /*
1813  * prism2sta_ev_tx
1814  *
1815  * Handles the Tx event.
1816  *
1817  * Arguments:
1818  *	wlandev		wlan device structure
1819  *	status		tx frame status word
1820  * Returns:
1821  *	nothing
1822  *
1823  * Side effects:
1824  *
1825  * Call context:
1826  *	interrupt
1827  */
prism2sta_ev_tx(struct wlandevice * wlandev,u16 status)1828 void prism2sta_ev_tx(struct wlandevice *wlandev, u16 status)
1829 {
1830 	pr_debug("Tx Complete, status=0x%04x\n", status);
1831 	/* update linux network stats */
1832 	wlandev->netdev->stats.tx_packets++;
1833 }
1834 
1835 /*
1836  * prism2sta_ev_alloc
1837  *
1838  * Handles the Alloc event.
1839  *
1840  * Arguments:
1841  *	wlandev		wlan device structure
1842  *
1843  * Returns:
1844  *	nothing
1845  *
1846  * Side effects:
1847  *
1848  * Call context:
1849  *	interrupt
1850  */
prism2sta_ev_alloc(struct wlandevice * wlandev)1851 void prism2sta_ev_alloc(struct wlandevice *wlandev)
1852 {
1853 	netif_wake_queue(wlandev->netdev);
1854 }
1855 
1856 /*
1857  * create_wlan
1858  *
1859  * Called at module init time.  This creates the struct wlandevice structure
1860  * and initializes it with relevant bits.
1861  *
1862  * Arguments:
1863  *	none
1864  *
1865  * Returns:
1866  *	the created struct wlandevice structure.
1867  *
1868  * Side effects:
1869  *	also allocates the priv/hw structures.
1870  *
1871  * Call context:
1872  *	process thread
1873  *
1874  */
create_wlan(void)1875 static struct wlandevice *create_wlan(void)
1876 {
1877 	struct wlandevice *wlandev = NULL;
1878 	struct hfa384x *hw = NULL;
1879 
1880 	/* Alloc our structures */
1881 	wlandev = kzalloc(sizeof(*wlandev), GFP_KERNEL);
1882 	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
1883 
1884 	if (!wlandev || !hw) {
1885 		kfree(wlandev);
1886 		kfree(hw);
1887 		return NULL;
1888 	}
1889 
1890 	/* Initialize the network device object. */
1891 	wlandev->nsdname = dev_info;
1892 	wlandev->msdstate = WLAN_MSD_HWPRESENT_PENDING;
1893 	wlandev->priv = hw;
1894 	wlandev->open = prism2sta_open;
1895 	wlandev->close = prism2sta_close;
1896 	wlandev->reset = prism2sta_reset;
1897 	wlandev->txframe = prism2sta_txframe;
1898 	wlandev->mlmerequest = prism2sta_mlmerequest;
1899 	wlandev->set_multicast_list = prism2sta_setmulticast;
1900 	wlandev->tx_timeout = hfa384x_tx_timeout;
1901 
1902 	wlandev->nsdcaps = P80211_NSDCAP_HWFRAGMENT | P80211_NSDCAP_AUTOJOIN;
1903 
1904 	/* Initialize the device private data structure. */
1905 	hw->dot11_desired_bss_type = 1;
1906 
1907 	return wlandev;
1908 }
1909 
prism2sta_commsqual_defer(struct work_struct * data)1910 void prism2sta_commsqual_defer(struct work_struct *data)
1911 {
1912 	struct hfa384x *hw = container_of(data, struct hfa384x, commsqual_bh);
1913 	struct wlandevice *wlandev = hw->wlandev;
1914 	struct hfa384x_bytestr32 ssid;
1915 	struct p80211msg_dot11req_mibget msg;
1916 	struct p80211item_uint32 *mibitem = (struct p80211item_uint32 *)
1917 						&msg.mibattribute.data;
1918 	int result = 0;
1919 
1920 	if (hw->wlandev->hwremoved)
1921 		return;
1922 
1923 	/* we don't care if we're in AP mode */
1924 	if ((wlandev->macmode == WLAN_MACMODE_NONE) ||
1925 	    (wlandev->macmode == WLAN_MACMODE_ESS_AP)) {
1926 		return;
1927 	}
1928 
1929 	/* It only makes sense to poll these in non-IBSS */
1930 	if (wlandev->macmode != WLAN_MACMODE_IBSS_STA) {
1931 		result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DBMCOMMSQUALITY,
1932 						&hw->qual, HFA384x_RID_DBMCOMMSQUALITY_LEN);
1933 
1934 		if (result) {
1935 			netdev_err(wlandev->netdev, "error fetching commsqual\n");
1936 			return;
1937 		}
1938 
1939 		pr_debug("commsqual %d %d %d\n",
1940 			 le16_to_cpu(hw->qual.cq_curr_bss),
1941 			 le16_to_cpu(hw->qual.asl_curr_bss),
1942 			 le16_to_cpu(hw->qual.anl_curr_fc));
1943 	}
1944 
1945 	/* Get the signal rate */
1946 	msg.msgcode = DIDMSG_DOT11REQ_MIBGET;
1947 	mibitem->did = DIDMIB_P2_MAC_CURRENTTXRATE;
1948 	result = p80211req_dorequest(wlandev, (u8 *)&msg);
1949 
1950 	if (result) {
1951 		pr_debug("get signal rate failed, result = %d\n",
1952 			 result);
1953 		return;
1954 	}
1955 
1956 	switch (mibitem->data) {
1957 	case HFA384x_RATEBIT_1:
1958 		hw->txrate = 10;
1959 		break;
1960 	case HFA384x_RATEBIT_2:
1961 		hw->txrate = 20;
1962 		break;
1963 	case HFA384x_RATEBIT_5dot5:
1964 		hw->txrate = 55;
1965 		break;
1966 	case HFA384x_RATEBIT_11:
1967 		hw->txrate = 110;
1968 		break;
1969 	default:
1970 		pr_debug("Bad ratebit (%d)\n", mibitem->data);
1971 	}
1972 
1973 	/* Lastly, we need to make sure the BSSID didn't change on us */
1974 	result = hfa384x_drvr_getconfig(hw,
1975 					HFA384x_RID_CURRENTBSSID,
1976 					wlandev->bssid, WLAN_BSSID_LEN);
1977 	if (result) {
1978 		pr_debug("getconfig(0x%02x) failed, result = %d\n",
1979 			 HFA384x_RID_CURRENTBSSID, result);
1980 		return;
1981 	}
1982 
1983 	result = hfa384x_drvr_getconfig(hw,
1984 					HFA384x_RID_CURRENTSSID,
1985 					&ssid, sizeof(ssid));
1986 	if (result) {
1987 		pr_debug("getconfig(0x%02x) failed, result = %d\n",
1988 			 HFA384x_RID_CURRENTSSID, result);
1989 		return;
1990 	}
1991 	prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *)&ssid,
1992 				(struct p80211pstrd *)&wlandev->ssid);
1993 
1994 	/* Reschedule timer */
1995 	mod_timer(&hw->commsqual_timer, jiffies + HZ);
1996 }
1997 
prism2sta_commsqual_timer(struct timer_list * t)1998 void prism2sta_commsqual_timer(struct timer_list *t)
1999 {
2000 	struct hfa384x *hw = from_timer(hw, t, commsqual_timer);
2001 
2002 	schedule_work(&hw->commsqual_bh);
2003 }
2004