Home
last modified time | relevance | path

Searched +full:adc +full:- +full:channels (Results 1 – 25 of 86) sorted by relevance

1234

/Documentation/devicetree/bindings/input/touchscreen/
Dresistive-adc-touch.txt1 Generic resistive touchscreen ADC
5 - compatible: must be "resistive-adc-touch"
6 The device must be connected to an ADC device that provides channels for
8 Refer to ../iio/iio-bindings.txt for details
9 - iio-channels: must have at least two channels connected to an ADC device.
10 These should correspond to the channels exposed by the ADC device and should
11 have the right index as the ADC device registers them. These channels
13 - iio-channel-names: must have all the channels' names. Mandatory channels
17 - iio-channels: The third channel named "pressure" is optional and can be
18 used if the ADC device also measures pressure besides position.
[all …]
Dti-tsc-adc.txt1 * TI - TSC ADC (Touschscreen and analog digital converter)
5 - mfd
7 "ti,am3359-tscadc" for AM335x/AM437x SoCs
8 "ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
9 - child "tsc"
10 compatible: Should be "ti,am3359-tsc".
13 ti,x-plate-resistance: X plate resistance
14 ti,coordinate-readouts: The sequencer supports a total of 16
22 remaining 4 can be used by the ADC.
23 ti,wire-config: Different boards could have a different order for
[all …]
/Documentation/devicetree/bindings/iio/adc/
Dst,stm32-adc.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
7 title: STMicroelectronics STM32 ADC bindings
10 STM32 ADC is a successive approximation analog-to-digital converter.
11 It has several multiplexed input channels. Conversions can be performed
12 in single, continuous, scan or discontinuous mode. Result of the ADC is
13 stored in a left-aligned or right-aligned 32-bit data register.
17 voltage goes beyond the user-defined, higher or lower thresholds.
[all …]
Dst,stm32-dfsdm-adc.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: STMicroelectronics STM32 DFSDM ADC device driver
10 - Fabrice Gasnier <fabrice.gasnier@st.com>
11 - Olivier Moysan <olivier.moysan@st.com>
14 STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
17 - Sigma delta modulators (motor control, metering...)
18 - PDM microphones (audio digital microphone)
[all …]
Dcosmic,10001-adc.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Cosmic Circuits CC-10001 ADC
10 - Jonathan Cameron <jic23@kernel.org>
13 Cosmic Circuits 10001 10-bit ADC device.
17 const: cosmic,10001-adc
22 adc-reserved-channels:
25 Bitmask of reserved channels, i.e. channels that cannot be
[all …]
Dadi,ad7124.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Analog Devices AD7124 ADC device driver
11 - Stefan Popa <stefan.popa@analog.com>
14 Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
16 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
21 - adi,ad7124-4
22 - adi,ad7124-8
[all …]
Dqcom,pm8xxx-xoadc.txt3 The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
4 oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
8 - compatible: should be one of:
9 "qcom,pm8018-adc"
10 "qcom,pm8038-adc"
11 "qcom,pm8058-adc"
12 "qcom,pm8921-adc"
14 - reg: should contain the ADC base address in the PMIC, typically
17 - xoadc-ref-supply: should reference a regulator that can supply
21 The following required properties are standard for IO channels, see
[all …]
Dadc.txt4 - bipolar : Boolean, if set the channel is used in bipolar mode.
5 - diff-channels : Differential channels muxed for this ADC. The first value
10 adc@0 {
11 compatible = "some,adc";
15 diff-channels = <0 1>;
20 diff-channels = <2 3>;
Dat91_adc.txt1 * AT91's Analog to Digital Converter (ADC)
4 - compatible: Should be "atmel,<chip>-adc"
6 - reg: Should contain ADC registers location and length
7 - interrupts: Should contain the IRQ line for the ADC
8 - clock-names: tuple listing input clock names.
10 - clocks: phandles to input clocks.
11 - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this
13 - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
15 - atmel,adc-vref: Reference voltage in millivolts for the conversions
16 - atmel,adc-res: List of resolutions in bits supported by the ADC. List size
[all …]
Dadi,ad7292.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Analog Devices AD7292 10-Bit Monitor and Control System
10 - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
13 Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs,
17 https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf
22 - adi,ad7292
27 vref-supply:
[all …]
Dingenic,adc.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 # Copyright 2019-2020 Artur Rojek
4 ---
5 $id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: Ingenic JZ47xx ADC controller IIO bindings
11 - Artur Rojek <contact@artur-rojek.eu>
14 Industrial I/O subsystem bindings for ADC controller found in
17 ADC clients must use the format described in iio-bindings.txt, giving
18 a phandle and IIO specifier pair ("io-channels") to the ADC controller.
[all …]
Drenesas,gyroadc.txt1 * Renesas R-Car GyroADC device driver
5 are sampled by the GyroADC block in a round-robin fashion and the result
9 - compatible: Should be "<soc-specific>", "renesas,rcar-gyroadc".
10 The <soc-specific> should be one of:
11 renesas,r8a7791-gyroadc - for the GyroADC block present
13 renesas,r8a7792-gyroadc - for the GyroADC with interrupt
15 - reg: Address and length of the register set for the device
16 - clocks: References to all the clocks specified in the clock-names
18 Documentation/devicetree/bindings/clock/clock-bindings.txt.
19 - clock-names: Shall contain "fck". The "fck" is the GyroADC block clock.
[all …]
Dqcom,spmi-vadc.yaml1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm's SPMI PMIC ADC
10 - Andy Gross <agross@kernel.org>
11 - Bjorn Andersson <bjorn.andersson@linaro.org>
14 SPMI PMIC voltage ADC (VADC) provides interface to clients to read
15 voltage. The VADC is a 15-bit sigma-delta ADC.
16 SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
[all …]
Daxp20x_adc.txt1 * X-Powers AXP ADC bindings
4 - compatible: should be one of:
5 - "x-powers,axp209-adc",
6 - "x-powers,axp221-adc",
7 - "x-powers,axp813-adc",
8 - #io-channel-cells: should be 1,
13 adc {
14 compatible = "x-powers,axp221-adc";
15 #io-channel-cells = <1>;
19 ADC channels and their indexes per variant:
[all …]
Dmarvell,berlin2-adc.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Berlin 2 Analog to Digital Converter (ADC)
10 - Antoine Tenart <antoine.tenart@free-electrons.com>
13 The Berlin ADC has 8 channels, with one connected to a temperature sensor.
14 It is part of the system controller register set. The ADC node should be a
15 sub-node of the system controller node.
19 const: marvell,berlin2-adc
[all …]
Dbrcm,iproc-static-adc.txt1 * Broadcom's IPROC Static ADC controller
3 Broadcom iProc ADC controller has 8 channels 10bit ADC.
8 - compatible: Must be "brcm,iproc-static-adc"
10 - adc-syscon: Handler of syscon node defining physical base address of the
13 - #io-channel-cells = <1>; As ADC has multiple outputs
14 refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
16 - io-channel-ranges:
17 refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
19 - clocks: Clock used for this block.
21 - clock-names: Clock name should be given as tsc_clk.
[all …]
/Documentation/devicetree/bindings/iio/
Diio-bindings.txt2 from Lars-Peter Clausen [1].
4 Sources of IIO channels can be represented by any node in the device
10 value of a #io-channel-cells property in the IIO provider node.
12 [1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
17 #io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes
27 adc: voltage-sensor@35 {
30 #io-channel-cells = <1>;
36 adc@35 {
37 compatible = "some-vendor,some-adc";
40 adc1: iio-device@0 {
[all …]
/Documentation/devicetree/bindings/input/
Dadc-joystick.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 # Copyright 2019-2020 Artur Rojek
4 ---
5 $id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: ADC attached joystick
11 - Artur Rojek <contact@artur-rojek.eu>
14 Bindings for joystick devices connected to ADC controllers supporting
19 const: adc-joystick
21 io-channels:
[all …]
Dadc-keys.txt1 ADC attached resistor ladder buttons
2 ------------------------------------
5 - compatible: "adc-keys"
6 - io-channels: Phandle to an ADC channel
7 - io-channel-names = "buttons";
8 - keyup-threshold-microvolt: Voltage at which all the keys are considered up.
11 - poll-interval: Poll interval time in milliseconds
12 - autorepeat: Boolean, Enable auto repeat feature of Linux input
15 Each button (key) is represented as a sub-node of "adc-keys":
17 Required subnode-properties:
[all …]
/Documentation/hwmon/
Dda9055.rst14 -----------
16 The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
20 the input of the ADC during the conversion.
22 The ADC is used to measure the following inputs:
24 - Channel 0: VDDOUT - measurement of the system voltage
25 - Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
26 - Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
27 - Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
28 - Channel 4: Internal Tjunc. - sense (internal temp. sensor)
31 chip junction temperature and auxiliary channels voltages.
[all …]
/Documentation/devicetree/bindings/iio/multiplexer/
Dio-channel-mux.txt4 e.g. an ADC channel, these bindings describe that situation.
7 - compatible : "io-channel-mux"
8 - io-channels : Channel node of the parent channel that has multiplexed
10 - io-channel-names : Should be "parent".
11 - #address-cells = <1>;
12 - #size-cells = <0>;
13 - mux-controls : Mux controller node to use for operating the mux
14 - channels : List of strings, labeling the mux controller states.
16 For each non-empty string in the channels property, an io-channel will
17 be created. The number of this io-channel is the same as the index into
[all …]
/Documentation/devicetree/bindings/sound/
Dst,stm32-adfsdm.txt5 For details on DFSDM bindings refer to ../iio/adc/st,stm32-dfsdm-adc.txt
8 - compatible: "st,stm32h7-dfsdm-dai".
10 - #sound-dai-cells : Must be equal to 0
12 - io-channels : phandle to iio dfsdm instance node.
17 compatible = "audio-graph-card";
23 compatible = "st,stm32h7-dfsdm";
26 clock-names = "dfsdm";
27 #interrupt-cells = <1>;
28 #address-cells = <1>;
29 #size-cells = <0>;
[all …]
/Documentation/devicetree/bindings/mux/
Dadi,adg792a.txt4 - compatible : "adi,adg792a" or "adi,adg792g"
5 - #mux-control-cells : <0> if parallel (the three muxes are bound together
8 * Standard mux-controller bindings as described in mux-controller.txt
11 - gpio-controller : if present, #gpio-cells below is required.
12 - #gpio-cells : should be <2>
13 - First cell is the GPO line number, i.e. 0 or 1
14 - Second cell is used to specify active high (0)
18 - idle-state : if present, array of states that the mux controllers will have
32 mux: mux-controller@50 {
35 #mux-control-cells = <1>;
[all …]
/Documentation/devicetree/bindings/power/supply/
Drx51-battery.txt6 - compatible: Should contain one of the following:
7 * "nokia,n900-battery"
8 - io-channels: Should contain IIO channel specifiers
9 for each element in io-channel-names.
10 - io-channel-names: Should contain the following values:
11 * "temp" - The ADC channel for temperature reading
12 * "bsi" - The ADC channel for battery size identification
13 * "vbat" - The ADC channel to measure the battery voltage
17 battery: n900-battery {
18 compatible = "nokia,n900-battery";
[all …]
Dingenic,battery.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 # Copyright 2019-2020 Artur Rojek
4 ---
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
11 - Artur Rojek <contact@artur-rojek.eu>
16 - const: ingenic,jz4740-battery
17 - items:
18 - enum:
19 - ingenic,jz4725b-battery
20 - ingenic,jz4770-battery
[all …]

1234