Searched full:sensor (Results 1 – 25 of 418) sorted by relevance
12345678910>>...17
/Documentation/hwmon/ |
D | occ.rst | 16 sensor data from the processor and the system. The OCC can provide the raw 17 sensor data as well as perform thermal and power management on the system. 32 The OCC sensor ID is an integer that represents the unique identifier of the 33 sensor with respect to the OCC. For example, a temperature sensor for the third 34 DIMM slot in the system may have a sensor ID of 7. This mapping is unavailable 35 to the device driver, which must therefore export the sensor ID as-is. 37 Some entries are only present with certain OCC sensor versions or only on 42 OCC sensor ID. 44 [with temperature sensor version 1] 50 [with temperature sensor version >= 2] [all …]
|
D | abituguru-datasheet.rst | 61 in a bank for a sensor is one or more bytes large. 68 number of bytes data per sensor and contents/meaning of those bytes. 70 Although both this document and the kernel driver have kept the sensor 73 a sensor. 100 Sending bank and sensor addresses to the uGuru 110 Once DATA holds 0x08 again write the sensor address to CMD. 116 First send the bank and sensor addresses as described above. 135 First send the bank and sensor addresses as described above. 168 This bank contains 0 sensors, iow the sensor address is ignored (but must be 172 This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0 [all …]
|
/Documentation/devicetree/bindings/powerpc/opal/ |
D | sensor-groups.txt | 1 IBM OPAL Sensor Groups Binding 4 Node: /ibm,opal/sensor-groups 6 Description: Contains sensor groups available in the Powernv P9 7 servers. Each child node indicates a sensor group. 9 - compatible : Should be "ibm,opal-sensor-group" 13 - type : String to indicate the type of sensor-group 15 - sensor-group-id: Abstract unique identifier provided by firmware of 16 type <u32> which is used for sensor-group 22 - sensors : Phandle array of child nodes of /ibm,opal/sensor/ 26 sensor groups like clearing min/max, enabling/disabling sensor
|
/Documentation/devicetree/bindings/hwmon/ |
D | ibmpowernv.txt | 6 "ibm,opal-sensor-cooling-fan" 7 "ibm,opal-sensor-amb-temp" 8 "ibm,opal-sensor-power-supply" 9 "ibm,opal-sensor-power" 10 - sensor-id: an opaque id provided by the firmware to the kernel, identifies a 11 given sensor and its attribute data 16 sensor-id = <0x7052107>; 17 compatible = "ibm,opal-sensor-cooling-fan"; 21 sensor-id = <0x5096000>; 22 compatible = "ibm,opal-sensor-amb-temp";
|
D | baikal,bt1-pvt.yaml | 8 title: Baikal-T1 PVT Sensor 15 sensor to monitor an internal SoC environment (chip temperature, supply 18 is based on the Analog Bits PVT sensor, but is equipped with a dedicated 20 sensor core functionality (APB3-bus based) and exposes an additional 27 | Temperature sensor |-+ +------| Sensors control | 29 | Voltage sensor |-|<--Mode--| +--->| Sampled data | 31 | Low-Vt sensor |-| | +--| Thresholds comparator | 33 | High-Vt sensor |-| | +->| Interrupts status | 35 | Standard-Vt sensor |-+ +---+--| Interrupts mask | 68 "#thermal-sensor-cells": [all …]
|
/Documentation/devicetree/bindings/thermal/ |
D | thermal-sensor.yaml | 5 $id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml# 8 title: Thermal sensor binding 14 Thermal management is achieved in devicetree by describing the sensor hardware 20 - thermal-sensor: device that measures temperature, has SoC-specific bindings 25 This binding describes the thermal-sensor. 27 Thermal sensor devices provide temperature sensing capabilities on thermal 28 zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor 32 "#thermal-sensor-cells": 34 Used to uniquely identify a thermal sensor instance within an IC. Will be 35 0 on sensor nodes with only a single sensor and at least 1 on nodes [all …]
|
D | nvidia,tegra186-bpmp-thermal.txt | 1 NVIDIA Tegra186 BPMP thermal sensor 5 and GPU temperatures. This binding describes the thermal sensor that is 11 This node represents a thermal sensor. See Documentation/devicetree/bindings/thermal/thermal-sensor… 20 - #thermal-sensor-cells: Cell for sensor index. 31 #thermal-sensor-cells = <1>;
|
D | thermal-generic-adc.txt | 1 General Purpose Analog To Digital Converter (ADC) based thermal sensor. 3 On some of platforms, thermal sensor like thermistors are connected to 4 one of ADC channel and sensor resistance is read via voltage across the 5 sensor resistor. The voltage read across the sensor is mapped to 11 - #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sen… 40 tboard_thermistor: thermal-sensor { 42 #thermal-sensor-cells = <0>; 44 io-channel-names = "sensor-channel";
|
D | sprd-thermal.yaml | 7 title: Spreadtrum thermal sensor controller bindings 38 "#thermal-sensor-cells": 48 "^([a-z]*-)?sensor(-section)?@[0-9]+$": 51 Represent one thermal sensor. 55 description: Specify the sensor id. 80 - "#thermal-sensor-cells" 93 #thermal-sensor-cells = <1>; 99 prometheus-sensor@0 { 105 ank-sensor@1 {
|
D | allwinner,sun8i-a83t-ths.yaml | 54 # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details 55 "#thermal-sensor-cells": 93 "#thermal-sensor-cells": 98 "#thermal-sensor-cells": 123 - '#thermal-sensor-cells' 129 thermal-sensor@1f04000 { 135 #thermal-sensor-cells = <1>; 139 thermal-sensor@1c25000 { 148 #thermal-sensor-cells = <0>; 152 thermal-sensor@5070400 { [all …]
|
D | hisilicon-thermal.txt | 1 * Temperature Sensor on hisilicon SoCs 6 - reg: physical base address of thermal sensor and length of memory mapped 12 - #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.… 23 #thermal-sensor-cells = <1>; 31 #thermal-sensor-cells = <1>;
|
D | amazon,al-thermal.txt | 1 Amazon's Annapurna Labs Thermal Sensor 8 - reg: The physical base address and length of the sensor's registers. 9 - #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.ya… 15 #thermal-sensor-cells = <0x1>;
|
D | imx8mm-thermal.yaml | 16 for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has 35 "#thermal-sensor-cells": 38 sensors, 0 for ONLY one sensor and 1 for multiple sensors. 47 - '#thermal-sensor-cells' 55 thermal-sensor@30260000 { 59 #thermal-sensor-cells = <0>;
|
D | tango-thermal.txt | 3 The SMP8758 SoC includes 3 instances of this temperature sensor 7 - #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.… 14 #thermal-sensor-cells = <0>;
|
/Documentation/devicetree/bindings/media/i2c/ |
D | mt9v032.txt | 1 * Aptina 1/3-Inch WVGA CMOS Digital Image Sensor 3 The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with 10 (a) "aptina,mt9v022" for MT9V022 color sensor 11 (b) "aptina,mt9v022m" for MT9V022 monochrome sensor 12 (c) "aptina,mt9v024" for MT9V024 color sensor 13 (d) "aptina,mt9v024m" for MT9V024 monochrome sensor 14 (e) "aptina,mt9v032" for MT9V032 color sensor 15 (f) "aptina,mt9v032m" for MT9V032 monochrome sensor 16 (g) "aptina,mt9v034" for MT9V034 color sensor 17 (h) "aptina,mt9v034m" for MT9V034 monochrome sensor
|
D | imx290.txt | 1 * Sony IMX290 1/2.8-Inch CMOS Image Sensor 3 The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with 5 interfaces. The sensor output is available via CMOS logic parallel SDR output, 15 - vdddo-supply: Sensor digital IO regulator. 16 - vdda-supply: Sensor analog regulator. 17 - vddd-supply: Sensor digital core regulator. 20 - reset-gpios: Sensor reset GPIO 34 imx290: camera-sensor@1a {
|
D | nokia,smia.txt | 1 SMIA/SMIA++ sensor 3 SMIA (Standard Mobile Imaging Architecture) is an image sensor standard 19 - vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor 21 - clocks: External clock to the sensor 22 - clock-frequency: Frequency of the external clock to the sensor 33 - rotation: Integer property; valid values are 0 (sensor mounted upright) 34 and 180 (sensor mounted upside down). See 50 camera-sensor@10 {
|
/Documentation/driver-api/media/drivers/ |
D | sh_mobile_ceu_camera.rst | 11 sensor scales: horizontal and vertical scales, configured by the sensor driver 57 (1) to (2) - sensor cropped left or top 58 (2) to (2') - sensor cropped width or height 59 (3) to (3') - sensor scale 62 (5) to (5') - reverse sensor scale applied to CEU cropped width or height 63 (2) to (5) - reverse sensor scale applied to CEU cropped left or top 72 1. Calculate current sensor scales: 76 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at 77 current sensor scales onto input window - this is user S_CROP: 86 4. Calculate sensor output window by applying combined scales to real input [all …]
|
/Documentation/hid/ |
D | hid-sensor.rst | 4 HID sensor framework provides necessary interfaces to implement sensor drivers, 5 which are connected to a sensor hub. The sensor hub is a HID device and it provides 6 a report descriptor conforming to HID 1.12 sensor usage tables. 8 Description from the HID 1.12 "HID Sensor Usages" specification: 9 "Standardization of HID usages for sensors would allow (but not require) sensor 15 This specification describes many usage IDs, which describe the type of sensor 16 and also the individual data fields. Each sensor can have variable number of 35 The report is indicating "sensor page (0x20)" contains an accelerometer-3D (0x73). 48 an ambient light sensor can send illumination data. 52 - Individual sensor processing part (sensor drivers) [all …]
|
/Documentation/ABI/testing/ |
D | sysfs-bus-iio-scd30 | 7 elements deterioration leads to sensor drift. 9 One can compensate for sensor drift by using automatic self 23 elements deterioration leads to sensor drift. 25 One can compensate for sensor drift by using forced 27 co2 reference available nearby the sensor. 30 sensor will set frc. 34 internally sensor had recalibrated itself.
|
D | sysfs-firmware-opal-sensor-groups | 4 Description: Sensor groups directory for POWER9 powernv servers 6 Each folder in this directory contains a sensor group 7 which are classified based on type of the sensor 20 In POWER9, the min-max of a sensor is the historical minimum 21 and maximum value of the sensor cached by OCC.
|
D | sysfs-bus-iio-cros-ec | 16 the motion sensor is placed. For example, in a laptop a motion 17 sensor can be located on the base or on the lid. Current valid 26 represents the sensor ID as exposed by the EC. This ID is used 27 by the Android sensor service hardware abstraction layer (sensor
|
/Documentation/admin-guide/media/ |
D | i2c-cardlist.rst | 55 Camera sensor devices 61 et8ek8 ET8EK8 camera sensor 62 hi556 Hynix Hi-556 sensor 63 imx214 Sony IMX214 sensor 64 imx219 Sony IMX219 sensor 65 imx258 Sony IMX258 sensor 66 imx274 Sony IMX274 sensor 67 imx290 Sony IMX290 sensor 68 imx319 Sony IMX319 sensor 69 imx355 Sony IMX355 sensor [all …]
|
/Documentation/devicetree/bindings/iio/temperature/ |
D | adi,ltc2983.yaml | 7 title: Analog Devices LTC2983 Multi-sensor Temperature system 13 Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System 67 adi,sensor-type: 68 description: Identifies the type of sensor connected to the device. 73 - adi,sensor-type 78 Represents a thermocouple sensor which is connected to one of the device 82 adi,sensor-type: 102 adi,sensor-oc-current-microamp: 110 Phandle which points to a sensor object responsible for measuring 132 Represents a diode sensor which is connected to one of the device [all …]
|
/Documentation/devicetree/bindings/ |
D | trivial-devices.yaml | 29 … # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin 37 # AMS iAQ-Core VOC Sensor 47 # CM32181: Ambient Light Sensor 49 # CM3232: Ambient Light Sensor 77 # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor 81 # MPL3115: Absolute Digital Pressure Sensor 83 # MPR121: Proximity Capacitive Touch Sensor Controller 87 # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface 95 # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor 103 # Intersil ISL29028 Ambient Light and Proximity Sensor [all …]
|
12345678910>>...17