1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright © 2009 Intel Corporation
4 */
5
6 #include <linux/delay.h>
7 #include <linux/i2c.h>
8 #include <linux/pm_runtime.h>
9
10 #include <drm/drm_fourcc.h>
11
12 #include "framebuffer.h"
13 #include "gma_display.h"
14 #include "power.h"
15 #include "psb_drv.h"
16 #include "psb_intel_drv.h"
17 #include "psb_intel_reg.h"
18
19 #define MRST_LIMIT_LVDS_100L 0
20 #define MRST_LIMIT_LVDS_83 1
21 #define MRST_LIMIT_LVDS_100 2
22 #define MRST_LIMIT_SDVO 3
23
24 #define MRST_DOT_MIN 19750
25 #define MRST_DOT_MAX 120000
26 #define MRST_M_MIN_100L 20
27 #define MRST_M_MIN_100 10
28 #define MRST_M_MIN_83 12
29 #define MRST_M_MAX_100L 34
30 #define MRST_M_MAX_100 17
31 #define MRST_M_MAX_83 20
32 #define MRST_P1_MIN 2
33 #define MRST_P1_MAX_0 7
34 #define MRST_P1_MAX_1 8
35
36 static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
37 struct drm_crtc *crtc, int target,
38 int refclk, struct gma_clock_t *best_clock);
39
40 static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
41 struct drm_crtc *crtc, int target,
42 int refclk, struct gma_clock_t *best_clock);
43
44 static const struct gma_limit_t mrst_limits[] = {
45 { /* MRST_LIMIT_LVDS_100L */
46 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
47 .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
48 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
49 .find_pll = mrst_lvds_find_best_pll,
50 },
51 { /* MRST_LIMIT_LVDS_83L */
52 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
53 .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
54 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
55 .find_pll = mrst_lvds_find_best_pll,
56 },
57 { /* MRST_LIMIT_LVDS_100 */
58 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
59 .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
60 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
61 .find_pll = mrst_lvds_find_best_pll,
62 },
63 { /* MRST_LIMIT_SDVO */
64 .vco = {.min = 1400000, .max = 2800000},
65 .n = {.min = 3, .max = 7},
66 .m = {.min = 80, .max = 137},
67 .p1 = {.min = 1, .max = 2},
68 .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 10},
69 .find_pll = mrst_sdvo_find_best_pll,
70 },
71 };
72
73 #define MRST_M_MIN 10
74 static const u32 oaktrail_m_converts[] = {
75 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
76 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
77 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
78 };
79
mrst_limit(struct drm_crtc * crtc,int refclk)80 static const struct gma_limit_t *mrst_limit(struct drm_crtc *crtc,
81 int refclk)
82 {
83 const struct gma_limit_t *limit = NULL;
84 struct drm_device *dev = crtc->dev;
85 struct drm_psb_private *dev_priv = dev->dev_private;
86
87 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
88 || gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
89 switch (dev_priv->core_freq) {
90 case 100:
91 limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
92 break;
93 case 166:
94 limit = &mrst_limits[MRST_LIMIT_LVDS_83];
95 break;
96 case 200:
97 limit = &mrst_limits[MRST_LIMIT_LVDS_100];
98 break;
99 }
100 } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
101 limit = &mrst_limits[MRST_LIMIT_SDVO];
102 } else {
103 limit = NULL;
104 dev_err(dev->dev, "mrst_limit Wrong display type.\n");
105 }
106
107 return limit;
108 }
109
110 /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
mrst_lvds_clock(int refclk,struct gma_clock_t * clock)111 static void mrst_lvds_clock(int refclk, struct gma_clock_t *clock)
112 {
113 clock->dot = (refclk * clock->m) / (14 * clock->p1);
114 }
115
mrst_print_pll(struct gma_clock_t * clock)116 static void mrst_print_pll(struct gma_clock_t *clock)
117 {
118 DRM_DEBUG_DRIVER("dotclock=%d, m=%d, m1=%d, m2=%d, n=%d, p1=%d, p2=%d\n",
119 clock->dot, clock->m, clock->m1, clock->m2, clock->n,
120 clock->p1, clock->p2);
121 }
122
mrst_sdvo_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)123 static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
124 struct drm_crtc *crtc, int target,
125 int refclk, struct gma_clock_t *best_clock)
126 {
127 struct gma_clock_t clock;
128 u32 target_vco, actual_freq;
129 s32 freq_error, min_error = 100000;
130
131 memset(best_clock, 0, sizeof(*best_clock));
132 memset(&clock, 0, sizeof(clock));
133
134 for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
135 for (clock.n = limit->n.min; clock.n <= limit->n.max;
136 clock.n++) {
137 for (clock.p1 = limit->p1.min;
138 clock.p1 <= limit->p1.max; clock.p1++) {
139 /* p2 value always stored in p2_slow on SDVO */
140 clock.p = clock.p1 * limit->p2.p2_slow;
141 target_vco = target * clock.p;
142
143 /* VCO will increase at this point so break */
144 if (target_vco > limit->vco.max)
145 break;
146
147 if (target_vco < limit->vco.min)
148 continue;
149
150 actual_freq = (refclk * clock.m) /
151 (clock.n * clock.p);
152 freq_error = 10000 -
153 ((target * 10000) / actual_freq);
154
155 if (freq_error < -min_error) {
156 /* freq_error will start to decrease at
157 this point so break */
158 break;
159 }
160
161 if (freq_error < 0)
162 freq_error = -freq_error;
163
164 if (freq_error < min_error) {
165 min_error = freq_error;
166 *best_clock = clock;
167 }
168 }
169 }
170 if (min_error == 0)
171 break;
172 }
173
174 return min_error == 0;
175 }
176
177 /**
178 * Returns a set of divisors for the desired target clock with the given refclk,
179 * or FALSE. Divisor values are the actual divisors for
180 */
mrst_lvds_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)181 static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
182 struct drm_crtc *crtc, int target,
183 int refclk, struct gma_clock_t *best_clock)
184 {
185 struct gma_clock_t clock;
186 int err = target;
187
188 memset(best_clock, 0, sizeof(*best_clock));
189 memset(&clock, 0, sizeof(clock));
190
191 for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
192 for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
193 clock.p1++) {
194 int this_err;
195
196 mrst_lvds_clock(refclk, &clock);
197
198 this_err = abs(clock.dot - target);
199 if (this_err < err) {
200 *best_clock = clock;
201 err = this_err;
202 }
203 }
204 }
205 return err != target;
206 }
207
208 /**
209 * Sets the power management mode of the pipe and plane.
210 *
211 * This code should probably grow support for turning the cursor off and back
212 * on appropriately at the same time as we're turning the pipe off/on.
213 */
oaktrail_crtc_dpms(struct drm_crtc * crtc,int mode)214 static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
215 {
216 struct drm_device *dev = crtc->dev;
217 struct drm_psb_private *dev_priv = dev->dev_private;
218 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
219 int pipe = gma_crtc->pipe;
220 const struct psb_offset *map = &dev_priv->regmap[pipe];
221 u32 temp;
222 int i;
223 int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
224
225 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
226 oaktrail_crtc_hdmi_dpms(crtc, mode);
227 return;
228 }
229
230 if (!gma_power_begin(dev, true))
231 return;
232
233 /* XXX: When our outputs are all unaware of DPMS modes other than off
234 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
235 */
236 switch (mode) {
237 case DRM_MODE_DPMS_ON:
238 case DRM_MODE_DPMS_STANDBY:
239 case DRM_MODE_DPMS_SUSPEND:
240 for (i = 0; i <= need_aux; i++) {
241 /* Enable the DPLL */
242 temp = REG_READ_WITH_AUX(map->dpll, i);
243 if ((temp & DPLL_VCO_ENABLE) == 0) {
244 REG_WRITE_WITH_AUX(map->dpll, temp, i);
245 REG_READ_WITH_AUX(map->dpll, i);
246 /* Wait for the clocks to stabilize. */
247 udelay(150);
248 REG_WRITE_WITH_AUX(map->dpll,
249 temp | DPLL_VCO_ENABLE, i);
250 REG_READ_WITH_AUX(map->dpll, i);
251 /* Wait for the clocks to stabilize. */
252 udelay(150);
253 REG_WRITE_WITH_AUX(map->dpll,
254 temp | DPLL_VCO_ENABLE, i);
255 REG_READ_WITH_AUX(map->dpll, i);
256 /* Wait for the clocks to stabilize. */
257 udelay(150);
258 }
259
260 /* Enable the pipe */
261 temp = REG_READ_WITH_AUX(map->conf, i);
262 if ((temp & PIPEACONF_ENABLE) == 0) {
263 REG_WRITE_WITH_AUX(map->conf,
264 temp | PIPEACONF_ENABLE, i);
265 }
266
267 /* Enable the plane */
268 temp = REG_READ_WITH_AUX(map->cntr, i);
269 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
270 REG_WRITE_WITH_AUX(map->cntr,
271 temp | DISPLAY_PLANE_ENABLE,
272 i);
273 /* Flush the plane changes */
274 REG_WRITE_WITH_AUX(map->base,
275 REG_READ_WITH_AUX(map->base, i), i);
276 }
277
278 }
279 gma_crtc_load_lut(crtc);
280
281 /* Give the overlay scaler a chance to enable
282 if it's on this pipe */
283 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
284 break;
285 case DRM_MODE_DPMS_OFF:
286 /* Give the overlay scaler a chance to disable
287 * if it's on this pipe */
288 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
289
290 for (i = 0; i <= need_aux; i++) {
291 /* Disable the VGA plane that we never use */
292 REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
293 /* Disable display plane */
294 temp = REG_READ_WITH_AUX(map->cntr, i);
295 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
296 REG_WRITE_WITH_AUX(map->cntr,
297 temp & ~DISPLAY_PLANE_ENABLE, i);
298 /* Flush the plane changes */
299 REG_WRITE_WITH_AUX(map->base,
300 REG_READ(map->base), i);
301 REG_READ_WITH_AUX(map->base, i);
302 }
303
304 /* Next, disable display pipes */
305 temp = REG_READ_WITH_AUX(map->conf, i);
306 if ((temp & PIPEACONF_ENABLE) != 0) {
307 REG_WRITE_WITH_AUX(map->conf,
308 temp & ~PIPEACONF_ENABLE, i);
309 REG_READ_WITH_AUX(map->conf, i);
310 }
311 /* Wait for for the pipe disable to take effect. */
312 gma_wait_for_vblank(dev);
313
314 temp = REG_READ_WITH_AUX(map->dpll, i);
315 if ((temp & DPLL_VCO_ENABLE) != 0) {
316 REG_WRITE_WITH_AUX(map->dpll,
317 temp & ~DPLL_VCO_ENABLE, i);
318 REG_READ_WITH_AUX(map->dpll, i);
319 }
320
321 /* Wait for the clocks to turn off. */
322 udelay(150);
323 }
324 break;
325 }
326
327 /* Set FIFO Watermarks (values taken from EMGD) */
328 REG_WRITE(DSPARB, 0x3f80);
329 REG_WRITE(DSPFW1, 0x3f8f0404);
330 REG_WRITE(DSPFW2, 0x04040f04);
331 REG_WRITE(DSPFW3, 0x0);
332 REG_WRITE(DSPFW4, 0x04040404);
333 REG_WRITE(DSPFW5, 0x04040404);
334 REG_WRITE(DSPFW6, 0x78);
335 REG_WRITE(DSPCHICKENBIT, REG_READ(DSPCHICKENBIT) | 0xc040);
336
337 gma_power_end(dev);
338 }
339
340 /**
341 * Return the pipe currently connected to the panel fitter,
342 * or -1 if the panel fitter is not present or not in use
343 */
oaktrail_panel_fitter_pipe(struct drm_device * dev)344 static int oaktrail_panel_fitter_pipe(struct drm_device *dev)
345 {
346 u32 pfit_control;
347
348 pfit_control = REG_READ(PFIT_CONTROL);
349
350 /* See if the panel fitter is in use */
351 if ((pfit_control & PFIT_ENABLE) == 0)
352 return -1;
353 return (pfit_control >> 29) & 3;
354 }
355
oaktrail_crtc_mode_set(struct drm_crtc * crtc,struct drm_display_mode * mode,struct drm_display_mode * adjusted_mode,int x,int y,struct drm_framebuffer * old_fb)356 static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
357 struct drm_display_mode *mode,
358 struct drm_display_mode *adjusted_mode,
359 int x, int y,
360 struct drm_framebuffer *old_fb)
361 {
362 struct drm_device *dev = crtc->dev;
363 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
364 struct drm_psb_private *dev_priv = dev->dev_private;
365 int pipe = gma_crtc->pipe;
366 const struct psb_offset *map = &dev_priv->regmap[pipe];
367 int refclk = 0;
368 struct gma_clock_t clock;
369 const struct gma_limit_t *limit;
370 u32 dpll = 0, fp = 0, dspcntr, pipeconf;
371 bool ok, is_sdvo = false;
372 bool is_lvds = false;
373 bool is_mipi = false;
374 struct drm_mode_config *mode_config = &dev->mode_config;
375 struct gma_encoder *gma_encoder = NULL;
376 uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
377 struct drm_connector *connector;
378 int i;
379 int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
380
381 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
382 return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
383
384 if (!gma_power_begin(dev, true))
385 return 0;
386
387 memcpy(&gma_crtc->saved_mode,
388 mode,
389 sizeof(struct drm_display_mode));
390 memcpy(&gma_crtc->saved_adjusted_mode,
391 adjusted_mode,
392 sizeof(struct drm_display_mode));
393
394 list_for_each_entry(connector, &mode_config->connector_list, head) {
395 if (!connector->encoder || connector->encoder->crtc != crtc)
396 continue;
397
398 gma_encoder = gma_attached_encoder(connector);
399
400 switch (gma_encoder->type) {
401 case INTEL_OUTPUT_LVDS:
402 is_lvds = true;
403 break;
404 case INTEL_OUTPUT_SDVO:
405 is_sdvo = true;
406 break;
407 case INTEL_OUTPUT_MIPI:
408 is_mipi = true;
409 break;
410 }
411 }
412
413 /* Disable the VGA plane that we never use */
414 for (i = 0; i <= need_aux; i++)
415 REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
416
417 /* Disable the panel fitter if it was on our pipe */
418 if (oaktrail_panel_fitter_pipe(dev) == pipe)
419 REG_WRITE(PFIT_CONTROL, 0);
420
421 for (i = 0; i <= need_aux; i++) {
422 REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) |
423 (mode->crtc_vdisplay - 1), i);
424 }
425
426 if (gma_encoder)
427 drm_object_property_get_value(&connector->base,
428 dev->mode_config.scaling_mode_property, &scalingType);
429
430 if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
431 /* Moorestown doesn't have register support for centering so
432 * we need to mess with the h/vblank and h/vsync start and
433 * ends to get centering */
434 int offsetX = 0, offsetY = 0;
435
436 offsetX = (adjusted_mode->crtc_hdisplay -
437 mode->crtc_hdisplay) / 2;
438 offsetY = (adjusted_mode->crtc_vdisplay -
439 mode->crtc_vdisplay) / 2;
440
441 for (i = 0; i <= need_aux; i++) {
442 REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) |
443 ((adjusted_mode->crtc_htotal - 1) << 16), i);
444 REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) |
445 ((adjusted_mode->crtc_vtotal - 1) << 16), i);
446 REG_WRITE_WITH_AUX(map->hblank,
447 (adjusted_mode->crtc_hblank_start - offsetX - 1) |
448 ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i);
449 REG_WRITE_WITH_AUX(map->hsync,
450 (adjusted_mode->crtc_hsync_start - offsetX - 1) |
451 ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i);
452 REG_WRITE_WITH_AUX(map->vblank,
453 (adjusted_mode->crtc_vblank_start - offsetY - 1) |
454 ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i);
455 REG_WRITE_WITH_AUX(map->vsync,
456 (adjusted_mode->crtc_vsync_start - offsetY - 1) |
457 ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i);
458 }
459 } else {
460 for (i = 0; i <= need_aux; i++) {
461 REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
462 ((adjusted_mode->crtc_htotal - 1) << 16), i);
463 REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
464 ((adjusted_mode->crtc_vtotal - 1) << 16), i);
465 REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
466 ((adjusted_mode->crtc_hblank_end - 1) << 16), i);
467 REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
468 ((adjusted_mode->crtc_hsync_end - 1) << 16), i);
469 REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
470 ((adjusted_mode->crtc_vblank_end - 1) << 16), i);
471 REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
472 ((adjusted_mode->crtc_vsync_end - 1) << 16), i);
473 }
474 }
475
476 /* Flush the plane changes */
477 {
478 const struct drm_crtc_helper_funcs *crtc_funcs =
479 crtc->helper_private;
480 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
481 }
482
483 /* setup pipeconf */
484 pipeconf = REG_READ(map->conf);
485
486 /* Set up the display plane register */
487 dspcntr = REG_READ(map->cntr);
488 dspcntr |= DISPPLANE_GAMMA_ENABLE;
489
490 if (pipe == 0)
491 dspcntr |= DISPPLANE_SEL_PIPE_A;
492 else
493 dspcntr |= DISPPLANE_SEL_PIPE_B;
494
495 if (is_mipi)
496 goto oaktrail_crtc_mode_set_exit;
497
498
499 dpll = 0; /*BIT16 = 0 for 100MHz reference */
500
501 refclk = is_sdvo ? 96000 : dev_priv->core_freq * 1000;
502 limit = mrst_limit(crtc, refclk);
503 ok = limit->find_pll(limit, crtc, adjusted_mode->clock,
504 refclk, &clock);
505
506 if (is_sdvo) {
507 /* Convert calculated values to register values */
508 clock.p1 = (1L << (clock.p1 - 1));
509 clock.m -= 2;
510 clock.n = (1L << (clock.n - 1));
511 }
512
513 if (!ok)
514 DRM_ERROR("Failed to find proper PLL settings");
515
516 mrst_print_pll(&clock);
517
518 if (is_sdvo)
519 fp = clock.n << 16 | clock.m;
520 else
521 fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8;
522
523 dpll |= DPLL_VGA_MODE_DIS;
524
525
526 dpll |= DPLL_VCO_ENABLE;
527
528 if (is_lvds)
529 dpll |= DPLLA_MODE_LVDS;
530 else
531 dpll |= DPLLB_MODE_DAC_SERIAL;
532
533 if (is_sdvo) {
534 int sdvo_pixel_multiply =
535 adjusted_mode->clock / mode->clock;
536
537 dpll |= DPLL_DVO_HIGH_SPEED;
538 dpll |=
539 (sdvo_pixel_multiply -
540 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
541 }
542
543
544 /* compute bitmask from p1 value */
545 if (is_sdvo)
546 dpll |= clock.p1 << 16; // dpll |= (1 << (clock.p1 - 1)) << 16;
547 else
548 dpll |= (1 << (clock.p1 - 2)) << 17;
549
550 dpll |= DPLL_VCO_ENABLE;
551
552 if (dpll & DPLL_VCO_ENABLE) {
553 for (i = 0; i <= need_aux; i++) {
554 REG_WRITE_WITH_AUX(map->fp0, fp, i);
555 REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i);
556 REG_READ_WITH_AUX(map->dpll, i);
557 /* Check the DPLLA lock bit PIPEACONF[29] */
558 udelay(150);
559 }
560 }
561
562 for (i = 0; i <= need_aux; i++) {
563 REG_WRITE_WITH_AUX(map->fp0, fp, i);
564 REG_WRITE_WITH_AUX(map->dpll, dpll, i);
565 REG_READ_WITH_AUX(map->dpll, i);
566 /* Wait for the clocks to stabilize. */
567 udelay(150);
568
569 /* write it again -- the BIOS does, after all */
570 REG_WRITE_WITH_AUX(map->dpll, dpll, i);
571 REG_READ_WITH_AUX(map->dpll, i);
572 /* Wait for the clocks to stabilize. */
573 udelay(150);
574
575 REG_WRITE_WITH_AUX(map->conf, pipeconf, i);
576 REG_READ_WITH_AUX(map->conf, i);
577 gma_wait_for_vblank(dev);
578
579 REG_WRITE_WITH_AUX(map->cntr, dspcntr, i);
580 gma_wait_for_vblank(dev);
581 }
582
583 oaktrail_crtc_mode_set_exit:
584 gma_power_end(dev);
585 return 0;
586 }
587
oaktrail_pipe_set_base(struct drm_crtc * crtc,int x,int y,struct drm_framebuffer * old_fb)588 static int oaktrail_pipe_set_base(struct drm_crtc *crtc,
589 int x, int y, struct drm_framebuffer *old_fb)
590 {
591 struct drm_device *dev = crtc->dev;
592 struct drm_psb_private *dev_priv = dev->dev_private;
593 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
594 struct drm_framebuffer *fb = crtc->primary->fb;
595 int pipe = gma_crtc->pipe;
596 const struct psb_offset *map = &dev_priv->regmap[pipe];
597 unsigned long start, offset;
598
599 u32 dspcntr;
600 int ret = 0;
601
602 /* no fb bound */
603 if (!fb) {
604 dev_dbg(dev->dev, "No FB bound\n");
605 return 0;
606 }
607
608 if (!gma_power_begin(dev, true))
609 return 0;
610
611 start = to_gtt_range(fb->obj[0])->offset;
612 offset = y * fb->pitches[0] + x * fb->format->cpp[0];
613
614 REG_WRITE(map->stride, fb->pitches[0]);
615
616 dspcntr = REG_READ(map->cntr);
617 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
618
619 switch (fb->format->cpp[0] * 8) {
620 case 8:
621 dspcntr |= DISPPLANE_8BPP;
622 break;
623 case 16:
624 if (fb->format->depth == 15)
625 dspcntr |= DISPPLANE_15_16BPP;
626 else
627 dspcntr |= DISPPLANE_16BPP;
628 break;
629 case 24:
630 case 32:
631 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
632 break;
633 default:
634 dev_err(dev->dev, "Unknown color depth\n");
635 ret = -EINVAL;
636 goto pipe_set_base_exit;
637 }
638 REG_WRITE(map->cntr, dspcntr);
639
640 REG_WRITE(map->base, offset);
641 REG_READ(map->base);
642 REG_WRITE(map->surf, start);
643 REG_READ(map->surf);
644
645 pipe_set_base_exit:
646 gma_power_end(dev);
647 return ret;
648 }
649
650 const struct drm_crtc_helper_funcs oaktrail_helper_funcs = {
651 .dpms = oaktrail_crtc_dpms,
652 .mode_set = oaktrail_crtc_mode_set,
653 .mode_set_base = oaktrail_pipe_set_base,
654 .prepare = gma_crtc_prepare,
655 .commit = gma_crtc_commit,
656 };
657
658 /* Not used yet */
659 const struct gma_clock_funcs mrst_clock_funcs = {
660 .clock = mrst_lvds_clock,
661 .limit = mrst_limit,
662 .pll_is_valid = gma_pll_is_valid,
663 };
664