1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * INET An implementation of the TCP/IP protocol suite for the LINUX
4 * operating system. INET is implemented using the BSD Socket
5 * interface as the means of communication with the user level.
6 *
7 * Holds initial configuration information for devices.
8 *
9 * Version: @(#)Space.c 1.0.7 08/12/93
10 *
11 * Authors: Ross Biro
12 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13 * Donald J. Becker, <becker@scyld.com>
14 *
15 * Changelog:
16 * Stephen Hemminger (09/2003)
17 * - get rid of pre-linked dev list, dynamic device allocation
18 * Paul Gortmaker (03/2002)
19 * - struct init cleanup, enable multiple ISA autoprobes.
20 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
21 * - fix sbni: s/device/net_device/
22 * Paul Gortmaker (06/98):
23 * - sort probes in a sane way, make sure all (safe) probes
24 * get run once & failed autoprobes don't autoprobe again.
25 */
26 #include <linux/netdevice.h>
27 #include <linux/etherdevice.h>
28 #include <linux/errno.h>
29 #include <linux/init.h>
30 #include <linux/netlink.h>
31 #include <net/Space.h>
32
33 /* A unified ethernet device probe. This is the easiest way to have every
34 * ethernet adaptor have the name "eth[0123...]".
35 */
36
37 struct devprobe2 {
38 struct net_device *(*probe)(int unit);
39 int status; /* non-zero if autoprobe has failed */
40 };
41
probe_list2(int unit,struct devprobe2 * p,int autoprobe)42 static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
43 {
44 struct net_device *dev;
45
46 for (; p->probe; p++) {
47 if (autoprobe && p->status)
48 continue;
49 dev = p->probe(unit);
50 if (!IS_ERR(dev))
51 return 0;
52 if (autoprobe)
53 p->status = PTR_ERR(dev);
54 }
55 return -ENODEV;
56 }
57
58 /* ISA probes that touch addresses < 0x400 (including those that also
59 * look for EISA/PCI cards in addition to ISA cards).
60 */
61 static struct devprobe2 isa_probes[] __initdata = {
62 #if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */
63 {hp100_probe, 0},
64 #endif
65 #ifdef CONFIG_3C515
66 {tc515_probe, 0},
67 #endif
68 #ifdef CONFIG_ULTRA
69 {ultra_probe, 0},
70 #endif
71 #ifdef CONFIG_WD80x3
72 {wd_probe, 0},
73 #endif
74 #if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */
75 {ne_probe, 0},
76 #endif
77 #ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
78 {lance_probe, 0},
79 #endif
80 #ifdef CONFIG_SMC9194
81 {smc_init, 0},
82 #endif
83 #ifdef CONFIG_CS89x0
84 #ifndef CONFIG_CS89x0_PLATFORM
85 {cs89x0_probe, 0},
86 #endif
87 #endif
88 #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel */
89 {i82596_probe, 0}, /* I82596 */
90 #endif
91 #ifdef CONFIG_NI65
92 {ni65_probe, 0},
93 #endif
94 {NULL, 0},
95 };
96
97 static struct devprobe2 m68k_probes[] __initdata = {
98 #ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
99 {atarilance_probe, 0},
100 #endif
101 #ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
102 {sun3lance_probe, 0},
103 #endif
104 #ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
105 {sun3_82586_probe, 0},
106 #endif
107 #ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
108 {apne_probe, 0},
109 #endif
110 #ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
111 {mvme147lance_probe, 0},
112 #endif
113 {NULL, 0},
114 };
115
116 /* Unified ethernet device probe, segmented per architecture and
117 * per bus interface. This drives the legacy devices only for now.
118 */
119
ethif_probe2(int unit)120 static void __init ethif_probe2(int unit)
121 {
122 unsigned long base_addr = netdev_boot_base("eth", unit);
123
124 if (base_addr == 1)
125 return;
126
127 (void)(probe_list2(unit, m68k_probes, base_addr == 0) &&
128 probe_list2(unit, isa_probes, base_addr == 0));
129 }
130
131 /* Statically configured drivers -- order matters here. */
net_olddevs_init(void)132 static int __init net_olddevs_init(void)
133 {
134 int num;
135
136 #ifdef CONFIG_SBNI
137 for (num = 0; num < 8; ++num)
138 sbni_probe(num);
139 #endif
140 for (num = 0; num < 8; ++num)
141 ethif_probe2(num);
142
143 #ifdef CONFIG_COPS
144 cops_probe(0);
145 cops_probe(1);
146 cops_probe(2);
147 #endif
148 #ifdef CONFIG_LTPC
149 ltpc_probe();
150 #endif
151
152 return 0;
153 }
154
155 device_initcall(net_olddevs_init);
156