1 /*
2 * TXx9 SPI controller driver.
3 *
4 * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
5 * Copyright (C) 2000-2001 Toshiba Corporation
6 *
7 * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
8 * terms of the GNU General Public License version 2. This program is
9 * licensed "as is" without any warranty of any kind, whether express
10 * or implied.
11 *
12 * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
13 *
14 * Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp)
15 */
16 #include <linux/init.h>
17 #include <linux/delay.h>
18 #include <linux/errno.h>
19 #include <linux/interrupt.h>
20 #include <linux/platform_device.h>
21 #include <linux/sched.h>
22 #include <linux/spinlock.h>
23 #include <linux/workqueue.h>
24 #include <linux/spi/spi.h>
25 #include <linux/err.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
28 #include <linux/module.h>
29 #include <linux/gpio/machine.h>
30 #include <linux/gpio/consumer.h>
31
32
33 #define SPI_FIFO_SIZE 4
34 #define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */
35 #define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */
36
37 #define TXx9_SPMCR 0x00
38 #define TXx9_SPCR0 0x04
39 #define TXx9_SPCR1 0x08
40 #define TXx9_SPFS 0x0c
41 #define TXx9_SPSR 0x14
42 #define TXx9_SPDR 0x18
43
44 /* SPMCR : SPI Master Control */
45 #define TXx9_SPMCR_OPMODE 0xc0
46 #define TXx9_SPMCR_CONFIG 0x40
47 #define TXx9_SPMCR_ACTIVE 0x80
48 #define TXx9_SPMCR_SPSTP 0x02
49 #define TXx9_SPMCR_BCLR 0x01
50
51 /* SPCR0 : SPI Control 0 */
52 #define TXx9_SPCR0_TXIFL_MASK 0xc000
53 #define TXx9_SPCR0_RXIFL_MASK 0x3000
54 #define TXx9_SPCR0_SIDIE 0x0800
55 #define TXx9_SPCR0_SOEIE 0x0400
56 #define TXx9_SPCR0_RBSIE 0x0200
57 #define TXx9_SPCR0_TBSIE 0x0100
58 #define TXx9_SPCR0_IFSPSE 0x0010
59 #define TXx9_SPCR0_SBOS 0x0004
60 #define TXx9_SPCR0_SPHA 0x0002
61 #define TXx9_SPCR0_SPOL 0x0001
62
63 /* SPSR : SPI Status */
64 #define TXx9_SPSR_TBSI 0x8000
65 #define TXx9_SPSR_RBSI 0x4000
66 #define TXx9_SPSR_TBS_MASK 0x3800
67 #define TXx9_SPSR_RBS_MASK 0x0700
68 #define TXx9_SPSR_SPOE 0x0080
69 #define TXx9_SPSR_IFSD 0x0008
70 #define TXx9_SPSR_SIDLE 0x0004
71 #define TXx9_SPSR_STRDY 0x0002
72 #define TXx9_SPSR_SRRDY 0x0001
73
74
75 struct txx9spi {
76 struct work_struct work;
77 spinlock_t lock; /* protect 'queue' */
78 struct list_head queue;
79 wait_queue_head_t waitq;
80 void __iomem *membase;
81 int baseclk;
82 struct clk *clk;
83 struct gpio_desc *last_chipselect;
84 int last_chipselect_val;
85 };
86
txx9spi_rd(struct txx9spi * c,int reg)87 static u32 txx9spi_rd(struct txx9spi *c, int reg)
88 {
89 return __raw_readl(c->membase + reg);
90 }
txx9spi_wr(struct txx9spi * c,u32 val,int reg)91 static void txx9spi_wr(struct txx9spi *c, u32 val, int reg)
92 {
93 __raw_writel(val, c->membase + reg);
94 }
95
txx9spi_cs_func(struct spi_device * spi,struct txx9spi * c,int on,unsigned int cs_delay)96 static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
97 int on, unsigned int cs_delay)
98 {
99 /*
100 * The GPIO descriptor will track polarity inversion inside
101 * gpiolib.
102 */
103 if (on) {
104 /* deselect the chip with cs_change hint in last transfer */
105 if (c->last_chipselect)
106 gpiod_set_value(c->last_chipselect,
107 !c->last_chipselect_val);
108 c->last_chipselect = spi->cs_gpiod;
109 c->last_chipselect_val = on;
110 } else {
111 c->last_chipselect = NULL;
112 ndelay(cs_delay); /* CS Hold Time */
113 }
114 gpiod_set_value(spi->cs_gpiod, on);
115 ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */
116 }
117
txx9spi_setup(struct spi_device * spi)118 static int txx9spi_setup(struct spi_device *spi)
119 {
120 struct txx9spi *c = spi_master_get_devdata(spi->master);
121
122 if (!spi->max_speed_hz)
123 return -EINVAL;
124
125 /* deselect chip */
126 spin_lock(&c->lock);
127 txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz);
128 spin_unlock(&c->lock);
129
130 return 0;
131 }
132
txx9spi_interrupt(int irq,void * dev_id)133 static irqreturn_t txx9spi_interrupt(int irq, void *dev_id)
134 {
135 struct txx9spi *c = dev_id;
136
137 /* disable rx intr */
138 txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE,
139 TXx9_SPCR0);
140 wake_up(&c->waitq);
141 return IRQ_HANDLED;
142 }
143
txx9spi_work_one(struct txx9spi * c,struct spi_message * m)144 static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
145 {
146 struct spi_device *spi = m->spi;
147 struct spi_transfer *t;
148 unsigned int cs_delay;
149 unsigned int cs_change = 1;
150 int status = 0;
151 u32 mcr;
152 u32 prev_speed_hz = 0;
153 u8 prev_bits_per_word = 0;
154
155 /* CS setup/hold/recovery time in nsec */
156 cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz;
157
158 mcr = txx9spi_rd(c, TXx9_SPMCR);
159 if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) {
160 dev_err(&spi->dev, "Bad mode.\n");
161 status = -EIO;
162 goto exit;
163 }
164 mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
165
166 /* enter config mode */
167 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
168 txx9spi_wr(c, TXx9_SPCR0_SBOS
169 | ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0)
170 | ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0)
171 | 0x08,
172 TXx9_SPCR0);
173
174 list_for_each_entry(t, &m->transfers, transfer_list) {
175 const void *txbuf = t->tx_buf;
176 void *rxbuf = t->rx_buf;
177 u32 data;
178 unsigned int len = t->len;
179 unsigned int wsize;
180 u32 speed_hz = t->speed_hz;
181 u8 bits_per_word = t->bits_per_word;
182
183 wsize = bits_per_word >> 3; /* in bytes */
184
185 if (prev_speed_hz != speed_hz
186 || prev_bits_per_word != bits_per_word) {
187 int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1;
188
189 n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER);
190 /* enter config mode */
191 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR,
192 TXx9_SPMCR);
193 txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1);
194 /* enter active mode */
195 txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR);
196
197 prev_speed_hz = speed_hz;
198 prev_bits_per_word = bits_per_word;
199 }
200
201 if (cs_change)
202 txx9spi_cs_func(spi, c, 1, cs_delay);
203 cs_change = t->cs_change;
204 while (len) {
205 unsigned int count = SPI_FIFO_SIZE;
206 int i;
207 u32 cr0;
208
209 if (len < count * wsize)
210 count = len / wsize;
211 /* now tx must be idle... */
212 while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE))
213 cpu_relax();
214 cr0 = txx9spi_rd(c, TXx9_SPCR0);
215 cr0 &= ~TXx9_SPCR0_RXIFL_MASK;
216 cr0 |= (count - 1) << 12;
217 /* enable rx intr */
218 cr0 |= TXx9_SPCR0_RBSIE;
219 txx9spi_wr(c, cr0, TXx9_SPCR0);
220 /* send */
221 for (i = 0; i < count; i++) {
222 if (txbuf) {
223 data = (wsize == 1)
224 ? *(const u8 *)txbuf
225 : *(const u16 *)txbuf;
226 txx9spi_wr(c, data, TXx9_SPDR);
227 txbuf += wsize;
228 } else
229 txx9spi_wr(c, 0, TXx9_SPDR);
230 }
231 /* wait all rx data */
232 wait_event(c->waitq,
233 txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI);
234 /* receive */
235 for (i = 0; i < count; i++) {
236 data = txx9spi_rd(c, TXx9_SPDR);
237 if (rxbuf) {
238 if (wsize == 1)
239 *(u8 *)rxbuf = data;
240 else
241 *(u16 *)rxbuf = data;
242 rxbuf += wsize;
243 }
244 }
245 len -= count * wsize;
246 }
247 m->actual_length += t->len;
248 spi_transfer_delay_exec(t);
249
250 if (!cs_change)
251 continue;
252 if (t->transfer_list.next == &m->transfers)
253 break;
254 /* sometimes a short mid-message deselect of the chip
255 * may be needed to terminate a mode or command
256 */
257 txx9spi_cs_func(spi, c, 0, cs_delay);
258 }
259
260 exit:
261 m->status = status;
262 if (m->complete)
263 m->complete(m->context);
264
265 /* normally deactivate chipselect ... unless no error and
266 * cs_change has hinted that the next message will probably
267 * be for this chip too.
268 */
269 if (!(status == 0 && cs_change))
270 txx9spi_cs_func(spi, c, 0, cs_delay);
271
272 /* enter config mode */
273 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
274 }
275
txx9spi_work(struct work_struct * work)276 static void txx9spi_work(struct work_struct *work)
277 {
278 struct txx9spi *c = container_of(work, struct txx9spi, work);
279 unsigned long flags;
280
281 spin_lock_irqsave(&c->lock, flags);
282 while (!list_empty(&c->queue)) {
283 struct spi_message *m;
284
285 m = container_of(c->queue.next, struct spi_message, queue);
286 list_del_init(&m->queue);
287 spin_unlock_irqrestore(&c->lock, flags);
288
289 txx9spi_work_one(c, m);
290
291 spin_lock_irqsave(&c->lock, flags);
292 }
293 spin_unlock_irqrestore(&c->lock, flags);
294 }
295
txx9spi_transfer(struct spi_device * spi,struct spi_message * m)296 static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
297 {
298 struct spi_master *master = spi->master;
299 struct txx9spi *c = spi_master_get_devdata(master);
300 struct spi_transfer *t;
301 unsigned long flags;
302
303 m->actual_length = 0;
304
305 /* check each transfer's parameters */
306 list_for_each_entry(t, &m->transfers, transfer_list) {
307 if (!t->tx_buf && !t->rx_buf && t->len)
308 return -EINVAL;
309 }
310
311 spin_lock_irqsave(&c->lock, flags);
312 list_add_tail(&m->queue, &c->queue);
313 schedule_work(&c->work);
314 spin_unlock_irqrestore(&c->lock, flags);
315
316 return 0;
317 }
318
319 /*
320 * Chip select uses GPIO only, further the driver is using the chip select
321 * numer (from the device tree "reg" property, and this can only come from
322 * device tree since this i MIPS and there is no way to pass platform data) as
323 * the GPIO number. As the platform has only one GPIO controller (the txx9 GPIO
324 * chip) it is thus using the chip select number as an offset into that chip.
325 * This chip has a maximum of 16 GPIOs 0..15 and this is what all platforms
326 * register.
327 *
328 * We modernized this behaviour by explicitly converting that offset to an
329 * offset on the GPIO chip using a GPIO descriptor machine table of the same
330 * size as the txx9 GPIO chip with a 1-to-1 mapping of chip select to GPIO
331 * offset.
332 *
333 * This is admittedly a hack, but it is countering the hack of using "reg" to
334 * contain a GPIO offset when it should be using "cs-gpios" as the SPI bindings
335 * state.
336 */
337 static struct gpiod_lookup_table txx9spi_cs_gpio_table = {
338 .dev_id = "spi0",
339 .table = {
340 GPIO_LOOKUP_IDX("TXx9", 0, "cs", 0, GPIO_ACTIVE_LOW),
341 GPIO_LOOKUP_IDX("TXx9", 1, "cs", 1, GPIO_ACTIVE_LOW),
342 GPIO_LOOKUP_IDX("TXx9", 2, "cs", 2, GPIO_ACTIVE_LOW),
343 GPIO_LOOKUP_IDX("TXx9", 3, "cs", 3, GPIO_ACTIVE_LOW),
344 GPIO_LOOKUP_IDX("TXx9", 4, "cs", 4, GPIO_ACTIVE_LOW),
345 GPIO_LOOKUP_IDX("TXx9", 5, "cs", 5, GPIO_ACTIVE_LOW),
346 GPIO_LOOKUP_IDX("TXx9", 6, "cs", 6, GPIO_ACTIVE_LOW),
347 GPIO_LOOKUP_IDX("TXx9", 7, "cs", 7, GPIO_ACTIVE_LOW),
348 GPIO_LOOKUP_IDX("TXx9", 8, "cs", 8, GPIO_ACTIVE_LOW),
349 GPIO_LOOKUP_IDX("TXx9", 9, "cs", 9, GPIO_ACTIVE_LOW),
350 GPIO_LOOKUP_IDX("TXx9", 10, "cs", 10, GPIO_ACTIVE_LOW),
351 GPIO_LOOKUP_IDX("TXx9", 11, "cs", 11, GPIO_ACTIVE_LOW),
352 GPIO_LOOKUP_IDX("TXx9", 12, "cs", 12, GPIO_ACTIVE_LOW),
353 GPIO_LOOKUP_IDX("TXx9", 13, "cs", 13, GPIO_ACTIVE_LOW),
354 GPIO_LOOKUP_IDX("TXx9", 14, "cs", 14, GPIO_ACTIVE_LOW),
355 GPIO_LOOKUP_IDX("TXx9", 15, "cs", 15, GPIO_ACTIVE_LOW),
356 { },
357 },
358 };
359
txx9spi_probe(struct platform_device * dev)360 static int txx9spi_probe(struct platform_device *dev)
361 {
362 struct spi_master *master;
363 struct txx9spi *c;
364 struct resource *res;
365 int ret = -ENODEV;
366 u32 mcr;
367 int irq;
368
369 master = spi_alloc_master(&dev->dev, sizeof(*c));
370 if (!master)
371 return ret;
372 c = spi_master_get_devdata(master);
373 platform_set_drvdata(dev, master);
374
375 INIT_WORK(&c->work, txx9spi_work);
376 spin_lock_init(&c->lock);
377 INIT_LIST_HEAD(&c->queue);
378 init_waitqueue_head(&c->waitq);
379
380 c->clk = devm_clk_get(&dev->dev, "spi-baseclk");
381 if (IS_ERR(c->clk)) {
382 ret = PTR_ERR(c->clk);
383 c->clk = NULL;
384 goto exit;
385 }
386 ret = clk_prepare_enable(c->clk);
387 if (ret) {
388 c->clk = NULL;
389 goto exit;
390 }
391 c->baseclk = clk_get_rate(c->clk);
392 master->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
393 master->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
394
395 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
396 c->membase = devm_ioremap_resource(&dev->dev, res);
397 if (IS_ERR(c->membase))
398 goto exit_busy;
399
400 /* enter config mode */
401 mcr = txx9spi_rd(c, TXx9_SPMCR);
402 mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
403 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
404
405 irq = platform_get_irq(dev, 0);
406 if (irq < 0)
407 goto exit_busy;
408 ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
409 "spi_txx9", c);
410 if (ret)
411 goto exit;
412
413 c->last_chipselect = NULL;
414
415 dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
416 (unsigned long long)res->start, irq,
417 (c->baseclk + 500000) / 1000000);
418
419 gpiod_add_lookup_table(&txx9spi_cs_gpio_table);
420
421 /* the spi->mode bits understood by this driver: */
422 master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
423
424 master->bus_num = dev->id;
425 master->setup = txx9spi_setup;
426 master->transfer = txx9spi_transfer;
427 master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
428 master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
429 master->use_gpio_descriptors = true;
430
431 ret = devm_spi_register_master(&dev->dev, master);
432 if (ret)
433 goto exit;
434 return 0;
435 exit_busy:
436 ret = -EBUSY;
437 exit:
438 clk_disable_unprepare(c->clk);
439 spi_master_put(master);
440 return ret;
441 }
442
txx9spi_remove(struct platform_device * dev)443 static int txx9spi_remove(struct platform_device *dev)
444 {
445 struct spi_master *master = platform_get_drvdata(dev);
446 struct txx9spi *c = spi_master_get_devdata(master);
447
448 flush_work(&c->work);
449 clk_disable_unprepare(c->clk);
450 return 0;
451 }
452
453 /* work with hotplug and coldplug */
454 MODULE_ALIAS("platform:spi_txx9");
455
456 static struct platform_driver txx9spi_driver = {
457 .probe = txx9spi_probe,
458 .remove = txx9spi_remove,
459 .driver = {
460 .name = "spi_txx9",
461 },
462 };
463
txx9spi_init(void)464 static int __init txx9spi_init(void)
465 {
466 return platform_driver_register(&txx9spi_driver);
467 }
468 subsys_initcall(txx9spi_init);
469
txx9spi_exit(void)470 static void __exit txx9spi_exit(void)
471 {
472 platform_driver_unregister(&txx9spi_driver);
473 }
474 module_exit(txx9spi_exit);
475
476 MODULE_DESCRIPTION("TXx9 SPI Driver");
477 MODULE_LICENSE("GPL");
478