1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * This is part of rtl8187 OpenSource driver. 4 * Copyright (C) Andrea Merello 2004-2005 <andrea.merello@gmail.com> 5 * 6 * Parts of this driver are based on the GPL part of the 7 * official Realtek driver. 8 * Parts of this driver are based on the rtl8180 driver skeleton 9 * from Patric Schenke & Andres Salomon. 10 * Parts of this driver are based on the Intel Pro Wireless 11 * 2100 GPL driver. 12 * 13 * We want to thank the Authors of those projects 14 * and the Ndiswrapper project Authors. 15 */ 16 17 /* Mariusz Matuszek added full registers definition with Realtek's name */ 18 19 /* this file contains register definitions for the rtl8187 MAC controller */ 20 #ifndef R8192_HW 21 #define R8192_HW 22 23 #define RTL8187_REQT_READ 0xc0 24 #define RTL8187_REQT_WRITE 0x40 25 #define RTL8187_REQ_GET_REGS 0x05 26 #define RTL8187_REQ_SET_REGS 0x05 27 28 #define MAX_TX_URB 5 29 #define MAX_RX_URB 16 30 31 #define R8180_MAX_RETRY 255 32 33 #define RX_URB_SIZE 9100 34 35 #define RTL8190_EEPROM_ID 0x8129 36 #define EEPROM_VID 0x02 37 #define EEPROM_PID 0x04 38 #define EEPROM_NODE_ADDRESS_BYTE_0 0x0C 39 40 #define EEPROM_TX_POWER_DIFF 0x1F 41 #define EEPROM_THERMAL_METER 0x20 42 #define EEPROM_PW_DIFF 0x21 //0x21 43 #define EEPROM_CRYSTAL_CAP 0x22 //0x22 44 45 #define EEPROM_TX_PW_INDEX_CCK 0x23 //0x23 46 #define EEPROM_TX_PW_INDEX_OFDM_24G 0x24 //0x24~0x26 47 #define EEPROM_TX_PW_INDEX_CCK_V1 0x29 //0x29~0x2B 48 #define EEPROM_TX_PW_INDEX_OFDM_24G_V1 0x2C //0x2C~0x2E 49 #define EEPROM_TX_PW_INDEX_VER 0x27 //0x27 50 51 #define EEPROM_DEFAULT_THERNAL_METER 0x7 52 #define EEPROM_DEFAULT_PW_DIFF 0x4 53 #define EEPROM_DEFAULT_CRYSTAL_CAP 0x5 54 #define EEPROM_DEFAULT_TX_POWER 0x1010 55 #define EEPROM_CUSTOMER_ID 0x7B //0x7B:CustomerID 56 #define EEPROM_CHANNEL_PLAN 0x16 //0x7C 57 58 #define EEPROM_CID_RUNTOP 0x2 59 #define EEPROM_CID_DLINK 0x8 60 61 #define AC_PARAM_TXOP_LIMIT_OFFSET 16 62 #define AC_PARAM_ECW_MAX_OFFSET 12 63 #define AC_PARAM_ECW_MIN_OFFSET 8 64 #define AC_PARAM_AIFS_OFFSET 0 65 66 //#endif 67 enum _RTL8192Usb_HW { 68 MAC0 = 0x000, 69 MAC4 = 0x004, 70 71 #define BB_GLOBAL_RESET_BIT 0x1 72 BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register 73 BSSIDR = 0x02E, // BSSID Register 74 CMDR = 0x037, // Command register 75 #define CR_RE 0x08 76 #define CR_TE 0x04 77 SIFS = 0x03E, // SIFS register 78 79 #define TCR_MXDMA_2048 7 80 #define TCR_LRL_OFFSET 0 81 #define TCR_SRL_OFFSET 8 82 #define TCR_MXDMA_OFFSET 21 83 #define TCR_SAT BIT(24) // Enable Rate depedent ack timeout timer 84 RCR = 0x044, // Receive Configuration Register 85 #define MAC_FILTER_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(5) | \ 86 BIT(12) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | \ 87 BIT(22) | BIT(23)) 88 #define RX_FIFO_THRESHOLD_MASK (BIT(13) | BIT(14) | BIT(15)) 89 #define RX_FIFO_THRESHOLD_SHIFT 13 90 #define RX_FIFO_THRESHOLD_NONE 7 91 #define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10)) 92 #define RCR_MXDMA_OFFSET 8 93 #define RCR_FIFO_OFFSET 13 94 #define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size. 95 #define RCR_CBSSID BIT(23) // Accept BSSID match packet 96 #define RCR_APWRMGT BIT(22) // Accept power management packet 97 #define RCR_AMF BIT(20) // Accept management type frame 98 #define RCR_ACF BIT(19) // Accept control type frame 99 #define RCR_ADF BIT(18) // Accept data type frame 100 #define RCR_AICV BIT(12) // Accept ICV error packet 101 #define RCR_ACRC32 BIT(5) // Accept CRC32 error packet 102 #define RCR_AB BIT(3) // Accept broadcast packet 103 #define RCR_AM BIT(2) // Accept multicast packet 104 #define RCR_APM BIT(1) // Accept physical match packet 105 #define RCR_AAP BIT(0) // Accept all unicast packet 106 SLOT_TIME = 0x049, // Slot Time Register 107 ACK_TIMEOUT = 0x04c, // Ack Timeout Register 108 EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE 109 EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK 110 EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO 111 EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI 112 BCN_TCFG = 0x062, // Beacon Time Configuration 113 #define BCN_TCFG_CW_SHIFT 8 114 #define BCN_TCFG_IFS 0 115 BCN_INTERVAL = 0x070, // Beacon Interval (TU) 116 ATIMWND = 0x072, // ATIM Window Size (TU) 117 BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT 118 BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA 119 BCN_ERR_THRESH = 0x078, // Beacon Error Threshold 120 RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd 121 WCAMI = 0x0A4, // Software write CAM input content 122 SECR = 0x0B0, //Security Configuration Register 123 #define SCR_TxUseDK BIT(0) //Force Tx Use Default Key 124 #define SCR_RxUseDK BIT(1) //Force Rx Use Default Key 125 #define SCR_TxEncEnable BIT(2) //Enable Tx Encryption 126 #define SCR_RxDecEnable BIT(3) //Enable Rx Decryption 127 #define SCR_SKByA2 BIT(4) //Search kEY BY A2 128 #define SCR_NoSKMC BIT(5) //No Key Search for Multicast 129 130 //---------------------------------------------------------------------------- 131 // 8190 CPU General Register (offset 0x100, 4 byte) 132 //---------------------------------------------------------------------------- 133 #define CPU_CCK_LOOPBACK 0x00030000 134 #define CPU_GEN_SYSTEM_RESET 0x00000001 135 #define CPU_GEN_FIRMWARE_RESET 0x00000008 136 #define CPU_GEN_BOOT_RDY 0x00000010 137 #define CPU_GEN_FIRM_RDY 0x00000020 138 #define CPU_GEN_PUT_CODE_OK 0x00000080 139 #define CPU_GEN_BB_RST 0x00000100 140 #define CPU_GEN_PWR_STB_CPU 0x00000004 141 #define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 142 #define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 143 CPU_GEN = 0x100, // CPU Reset Register 144 145 AcmHwCtrl = 0x171, // ACM Hardware Control Register 146 //---------------------------------------------------------------------------- 147 //// 148 //// 8190 AcmHwCtrl bits (offset 0x171, 1 byte) 149 ////---------------------------------------------------------------------------- 150 // 151 #define AcmHw_BeqEn BIT(1) 152 153 RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk 154 RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High 155 RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public, 156 QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID 157 158 #define BW_OPMODE_5G BIT(1) 159 #define BW_OPMODE_20MHZ BIT(2) 160 BW_OPMODE = 0x300, // Bandwidth operation mode 161 MSR = 0x303, // Media Status register 162 #define MSR_LINK_MASK (BIT(0)|BIT(1)) 163 #define MSR_LINK_MANAGED 2 164 #define MSR_LINK_NONE 0 165 #define MSR_LINK_SHIFT 0 166 #define MSR_LINK_ADHOC 1 167 #define MSR_LINK_MASTER 3 168 RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long 169 #define RETRY_LIMIT_SHORT_SHIFT 8 170 #define RETRY_LIMIT_LONG_SHIFT 0 171 RRSR = 0x310, // Response Rate Set 172 #define RRSR_1M BIT(0) 173 #define RRSR_2M BIT(1) 174 #define RRSR_5_5M BIT(2) 175 #define RRSR_11M BIT(3) 176 #define RRSR_6M BIT(4) 177 #define RRSR_9M BIT(5) 178 #define RRSR_12M BIT(6) 179 #define RRSR_18M BIT(7) 180 #define RRSR_24M BIT(8) 181 #define RRSR_36M BIT(9) 182 #define RRSR_48M BIT(10) 183 #define RRSR_54M BIT(11) 184 #define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not. 185 UFWP = 0x318, 186 RATR0 = 0x320, // Rate Adaptive Table register1 187 DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI 188 //---------------------------------------------------------------------------- 189 // 8190 Rate Adaptive Table Register (offset 0x320, 4 byte) 190 //---------------------------------------------------------------------------- 191 //CCK 192 #define RATR_1M 0x00000001 193 #define RATR_2M 0x00000002 194 #define RATR_55M 0x00000004 195 #define RATR_11M 0x00000008 196 //OFDM 197 #define RATR_6M 0x00000010 198 #define RATR_9M 0x00000020 199 #define RATR_12M 0x00000040 200 #define RATR_18M 0x00000080 201 #define RATR_24M 0x00000100 202 #define RATR_36M 0x00000200 203 #define RATR_48M 0x00000400 204 #define RATR_54M 0x00000800 205 //MCS 1 Spatial Stream 206 #define RATR_MCS0 0x00001000 207 #define RATR_MCS1 0x00002000 208 #define RATR_MCS2 0x00004000 209 #define RATR_MCS3 0x00008000 210 #define RATR_MCS4 0x00010000 211 #define RATR_MCS5 0x00020000 212 #define RATR_MCS6 0x00040000 213 #define RATR_MCS7 0x00080000 214 //MCS 2 Spatial Stream 215 #define RATR_MCS8 0x00100000 216 #define RATR_MCS9 0x00200000 217 #define RATR_MCS10 0x00400000 218 #define RATR_MCS11 0x00800000 219 #define RATR_MCS12 0x01000000 220 #define RATR_MCS13 0x02000000 221 #define RATR_MCS14 0x04000000 222 #define RATR_MCS15 0x08000000 223 // ALL CCK Rate 224 #define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M 225 #define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\ 226 |RATR_36M|RATR_48M|RATR_54M 227 #define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \ 228 RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7 229 #define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \ 230 RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15 231 232 EPROM_CMD = 0xfe58, 233 #define Cmd9346CR_9356SEL BIT(4) 234 #define EPROM_CMD_OPERATING_MODE_SHIFT 6 235 #define EPROM_CMD_NORMAL 0 236 #define EPROM_CMD_PROGRAM 2 237 #define EPROM_CS_BIT BIT(3) 238 #define EPROM_CK_BIT BIT(2) 239 #define EPROM_W_BIT BIT(1) 240 #define EPROM_R_BIT BIT(0) 241 }; 242 243 //---------------------------------------------------------------------------- 244 // 818xB AnaParm & AnaParm2 Register 245 //---------------------------------------------------------------------------- 246 #define GPI 0x108 247 #endif 248