• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (C) STMicroelectronics SA 2014
4  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
5  */
6 
7 #ifndef _STI_HDMI_H_
8 #define _STI_HDMI_H_
9 
10 #include <linux/hdmi.h>
11 #include <linux/platform_device.h>
12 
13 #include <media/cec-notifier.h>
14 
15 #include <drm/drm_modes.h>
16 #include <drm/drm_property.h>
17 
18 #define HDMI_STA           0x0010
19 #define HDMI_STA_DLL_LCK   BIT(5)
20 #define HDMI_STA_HOT_PLUG  BIT(4)
21 
22 struct sti_hdmi;
23 
24 struct hdmi_phy_ops {
25 	bool (*start)(struct sti_hdmi *hdmi);
26 	void (*stop)(struct sti_hdmi *hdmi);
27 };
28 
29 struct hdmi_audio_params {
30 	bool enabled;
31 	unsigned int sample_width;
32 	unsigned int sample_rate;
33 	struct hdmi_audio_infoframe cea;
34 };
35 
36 static const struct drm_prop_enum_list colorspace_mode_names[] = {
37 	{ HDMI_COLORSPACE_RGB, "rgb" },
38 	{ HDMI_COLORSPACE_YUV422, "yuv422" },
39 	{ HDMI_COLORSPACE_YUV444, "yuv444" },
40 };
41 
42 #define DEFAULT_COLORSPACE_MODE HDMI_COLORSPACE_RGB
43 
44 /**
45  * STI hdmi structure
46  *
47  * @dev: driver device
48  * @drm_dev: pointer to drm device
49  * @mode: current display mode selected
50  * @regs: hdmi register
51  * @syscfg: syscfg register for pll rejection configuration
52  * @clk_pix: hdmi pixel clock
53  * @clk_tmds: hdmi tmds clock
54  * @clk_phy: hdmi phy clock
55  * @clk_audio: hdmi audio clock
56  * @irq: hdmi interrupt number
57  * @irq_status: interrupt status register
58  * @phy_ops: phy start/stop operations
59  * @enabled: true if hdmi is enabled else false
60  * @hpd: hot plug detect status
61  * @wait_event: wait event
62  * @event_received: wait event status
63  * @reset: reset control of the hdmi phy
64  * @ddc_adapt: i2c ddc adapter
65  * @colorspace: current colorspace selected
66  * @hdmi_monitor: true if HDMI monitor detected else DVI monitor assumed
67  * @audio_pdev: ASoC hdmi-codec platform device
68  * @audio: hdmi audio parameters.
69  * @drm_connector: hdmi connector
70  * @notifier: hotplug detect notifier
71  */
72 struct sti_hdmi {
73 	struct device dev;
74 	struct drm_device *drm_dev;
75 	struct drm_display_mode mode;
76 	void __iomem *regs;
77 	void __iomem *syscfg;
78 	struct clk *clk_pix;
79 	struct clk *clk_tmds;
80 	struct clk *clk_phy;
81 	struct clk *clk_audio;
82 	int irq;
83 	u32 irq_status;
84 	struct hdmi_phy_ops *phy_ops;
85 	bool enabled;
86 	bool hpd;
87 	wait_queue_head_t wait_event;
88 	bool event_received;
89 	struct reset_control *reset;
90 	struct i2c_adapter *ddc_adapt;
91 	enum hdmi_colorspace colorspace;
92 	bool hdmi_monitor;
93 	struct platform_device *audio_pdev;
94 	struct hdmi_audio_params audio;
95 	struct drm_connector *drm_connector;
96 	struct cec_notifier *notifier;
97 };
98 
99 u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
100 void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);
101 
102 /**
103  * hdmi phy config structure
104  *
105  * A pointer to an array of these structures is passed to a TMDS (HDMI) output
106  * via the control interface to provide board and SoC specific
107  * configurations of the HDMI PHY. Each entry in the array specifies a hardware
108  * specific configuration for a given TMDS clock frequency range.
109  *
110  * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
111  * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
112  * @config: SoC specific register configuration
113  */
114 struct hdmi_phy_config {
115 	u32 min_tmds_freq;
116 	u32 max_tmds_freq;
117 	u32 config[4];
118 };
119 
120 #endif
121