1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright © 2006-2011 Intel Corporation
4 *
5 * Authors:
6 * Eric Anholt <eric@anholt.net>
7 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
8 */
9
10 #include <linux/delay.h>
11 #include <linux/highmem.h>
12
13 #include <drm/drm_crtc.h>
14 #include <drm/drm_fourcc.h>
15 #include <drm/drm_vblank.h>
16
17 #include "framebuffer.h"
18 #include "gma_display.h"
19 #include "psb_drv.h"
20 #include "psb_intel_drv.h"
21 #include "psb_intel_reg.h"
22
23 /**
24 * Returns whether any output on the specified pipe is of the specified type
25 */
gma_pipe_has_type(struct drm_crtc * crtc,int type)26 bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
27 {
28 struct drm_device *dev = crtc->dev;
29 struct drm_mode_config *mode_config = &dev->mode_config;
30 struct drm_connector *l_entry;
31
32 list_for_each_entry(l_entry, &mode_config->connector_list, head) {
33 if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
34 struct gma_encoder *gma_encoder =
35 gma_attached_encoder(l_entry);
36 if (gma_encoder->type == type)
37 return true;
38 }
39 }
40
41 return false;
42 }
43
gma_wait_for_vblank(struct drm_device * dev)44 void gma_wait_for_vblank(struct drm_device *dev)
45 {
46 /* Wait for 20ms, i.e. one cycle at 50hz. */
47 mdelay(20);
48 }
49
gma_pipe_set_base(struct drm_crtc * crtc,int x,int y,struct drm_framebuffer * old_fb)50 int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
51 struct drm_framebuffer *old_fb)
52 {
53 struct drm_device *dev = crtc->dev;
54 struct drm_psb_private *dev_priv = dev->dev_private;
55 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
56 struct drm_framebuffer *fb = crtc->primary->fb;
57 struct gtt_range *gtt;
58 int pipe = gma_crtc->pipe;
59 const struct psb_offset *map = &dev_priv->regmap[pipe];
60 unsigned long start, offset;
61 u32 dspcntr;
62 int ret = 0;
63
64 if (!gma_power_begin(dev, true))
65 return 0;
66
67 /* no fb bound */
68 if (!fb) {
69 dev_err(dev->dev, "No FB bound\n");
70 goto gma_pipe_cleaner;
71 }
72
73 gtt = to_gtt_range(fb->obj[0]);
74
75 /* We are displaying this buffer, make sure it is actually loaded
76 into the GTT */
77 ret = psb_gtt_pin(gtt);
78 if (ret < 0)
79 goto gma_pipe_set_base_exit;
80 start = gtt->offset;
81 offset = y * fb->pitches[0] + x * fb->format->cpp[0];
82
83 REG_WRITE(map->stride, fb->pitches[0]);
84
85 dspcntr = REG_READ(map->cntr);
86 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
87
88 switch (fb->format->cpp[0] * 8) {
89 case 8:
90 dspcntr |= DISPPLANE_8BPP;
91 break;
92 case 16:
93 if (fb->format->depth == 15)
94 dspcntr |= DISPPLANE_15_16BPP;
95 else
96 dspcntr |= DISPPLANE_16BPP;
97 break;
98 case 24:
99 case 32:
100 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
101 break;
102 default:
103 dev_err(dev->dev, "Unknown color depth\n");
104 ret = -EINVAL;
105 goto gma_pipe_set_base_exit;
106 }
107 REG_WRITE(map->cntr, dspcntr);
108
109 dev_dbg(dev->dev,
110 "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
111
112 /* FIXME: Investigate whether this really is the base for psb and why
113 the linear offset is named base for the other chips. map->surf
114 should be the base and map->linoff the offset for all chips */
115 if (IS_PSB(dev)) {
116 REG_WRITE(map->base, offset + start);
117 REG_READ(map->base);
118 } else {
119 REG_WRITE(map->base, offset);
120 REG_READ(map->base);
121 REG_WRITE(map->surf, start);
122 REG_READ(map->surf);
123 }
124
125 gma_pipe_cleaner:
126 /* If there was a previous display we can now unpin it */
127 if (old_fb)
128 psb_gtt_unpin(to_gtt_range(old_fb->obj[0]));
129
130 gma_pipe_set_base_exit:
131 gma_power_end(dev);
132 return ret;
133 }
134
135 /* Loads the palette/gamma unit for the CRTC with the prepared values */
gma_crtc_load_lut(struct drm_crtc * crtc)136 void gma_crtc_load_lut(struct drm_crtc *crtc)
137 {
138 struct drm_device *dev = crtc->dev;
139 struct drm_psb_private *dev_priv = dev->dev_private;
140 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
141 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
142 int palreg = map->palette;
143 u16 *r, *g, *b;
144 int i;
145
146 /* The clocks have to be on to load the palette. */
147 if (!crtc->enabled)
148 return;
149
150 r = crtc->gamma_store;
151 g = r + crtc->gamma_size;
152 b = g + crtc->gamma_size;
153
154 if (gma_power_begin(dev, false)) {
155 for (i = 0; i < 256; i++) {
156 REG_WRITE(palreg + 4 * i,
157 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) |
158 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) |
159 ((*b++ >> 8) + gma_crtc->lut_adj[i]));
160 }
161 gma_power_end(dev);
162 } else {
163 for (i = 0; i < 256; i++) {
164 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
165 dev_priv->regs.pipe[0].palette[i] =
166 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) |
167 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) |
168 ((*b++ >> 8) + gma_crtc->lut_adj[i]);
169 }
170
171 }
172 }
173
gma_crtc_gamma_set(struct drm_crtc * crtc,u16 * red,u16 * green,u16 * blue,u32 size,struct drm_modeset_acquire_ctx * ctx)174 int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
175 u32 size,
176 struct drm_modeset_acquire_ctx *ctx)
177 {
178 gma_crtc_load_lut(crtc);
179
180 return 0;
181 }
182
183 /**
184 * Sets the power management mode of the pipe and plane.
185 *
186 * This code should probably grow support for turning the cursor off and back
187 * on appropriately at the same time as we're turning the pipe off/on.
188 */
gma_crtc_dpms(struct drm_crtc * crtc,int mode)189 void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
190 {
191 struct drm_device *dev = crtc->dev;
192 struct drm_psb_private *dev_priv = dev->dev_private;
193 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
194 int pipe = gma_crtc->pipe;
195 const struct psb_offset *map = &dev_priv->regmap[pipe];
196 u32 temp;
197
198 /* XXX: When our outputs are all unaware of DPMS modes other than off
199 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
200 */
201
202 if (IS_CDV(dev))
203 dev_priv->ops->disable_sr(dev);
204
205 switch (mode) {
206 case DRM_MODE_DPMS_ON:
207 case DRM_MODE_DPMS_STANDBY:
208 case DRM_MODE_DPMS_SUSPEND:
209 if (gma_crtc->active)
210 break;
211
212 gma_crtc->active = true;
213
214 /* Enable the DPLL */
215 temp = REG_READ(map->dpll);
216 if ((temp & DPLL_VCO_ENABLE) == 0) {
217 REG_WRITE(map->dpll, temp);
218 REG_READ(map->dpll);
219 /* Wait for the clocks to stabilize. */
220 udelay(150);
221 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
222 REG_READ(map->dpll);
223 /* Wait for the clocks to stabilize. */
224 udelay(150);
225 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
226 REG_READ(map->dpll);
227 /* Wait for the clocks to stabilize. */
228 udelay(150);
229 }
230
231 /* Enable the plane */
232 temp = REG_READ(map->cntr);
233 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
234 REG_WRITE(map->cntr,
235 temp | DISPLAY_PLANE_ENABLE);
236 /* Flush the plane changes */
237 REG_WRITE(map->base, REG_READ(map->base));
238 }
239
240 udelay(150);
241
242 /* Enable the pipe */
243 temp = REG_READ(map->conf);
244 if ((temp & PIPEACONF_ENABLE) == 0)
245 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
246
247 temp = REG_READ(map->status);
248 temp &= ~(0xFFFF);
249 temp |= PIPE_FIFO_UNDERRUN;
250 REG_WRITE(map->status, temp);
251 REG_READ(map->status);
252
253 gma_crtc_load_lut(crtc);
254
255 /* Give the overlay scaler a chance to enable
256 * if it's on this pipe */
257 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
258
259 drm_crtc_vblank_on(crtc);
260 break;
261 case DRM_MODE_DPMS_OFF:
262 if (!gma_crtc->active)
263 break;
264
265 gma_crtc->active = false;
266
267 /* Give the overlay scaler a chance to disable
268 * if it's on this pipe */
269 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
270
271 /* Disable the VGA plane that we never use */
272 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
273
274 /* Turn off vblank interrupts */
275 drm_crtc_vblank_off(crtc);
276
277 /* Wait for vblank for the disable to take effect */
278 gma_wait_for_vblank(dev);
279
280 /* Disable plane */
281 temp = REG_READ(map->cntr);
282 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
283 REG_WRITE(map->cntr,
284 temp & ~DISPLAY_PLANE_ENABLE);
285 /* Flush the plane changes */
286 REG_WRITE(map->base, REG_READ(map->base));
287 REG_READ(map->base);
288 }
289
290 /* Disable pipe */
291 temp = REG_READ(map->conf);
292 if ((temp & PIPEACONF_ENABLE) != 0) {
293 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
294 REG_READ(map->conf);
295 }
296
297 /* Wait for vblank for the disable to take effect. */
298 gma_wait_for_vblank(dev);
299
300 udelay(150);
301
302 /* Disable DPLL */
303 temp = REG_READ(map->dpll);
304 if ((temp & DPLL_VCO_ENABLE) != 0) {
305 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
306 REG_READ(map->dpll);
307 }
308
309 /* Wait for the clocks to turn off. */
310 udelay(150);
311 break;
312 }
313
314 if (IS_CDV(dev))
315 dev_priv->ops->update_wm(dev, crtc);
316
317 /* Set FIFO watermarks */
318 REG_WRITE(DSPARB, 0x3F3E);
319 }
320
gma_crtc_cursor_set(struct drm_crtc * crtc,struct drm_file * file_priv,uint32_t handle,uint32_t width,uint32_t height)321 int gma_crtc_cursor_set(struct drm_crtc *crtc,
322 struct drm_file *file_priv,
323 uint32_t handle,
324 uint32_t width, uint32_t height)
325 {
326 struct drm_device *dev = crtc->dev;
327 struct drm_psb_private *dev_priv = dev->dev_private;
328 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
329 int pipe = gma_crtc->pipe;
330 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
331 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
332 uint32_t temp;
333 size_t addr = 0;
334 struct gtt_range *gt;
335 struct gtt_range *cursor_gt = gma_crtc->cursor_gt;
336 struct drm_gem_object *obj;
337 void *tmp_dst, *tmp_src;
338 int ret = 0, i, cursor_pages;
339
340 /* If we didn't get a handle then turn the cursor off */
341 if (!handle) {
342 temp = CURSOR_MODE_DISABLE;
343 if (gma_power_begin(dev, false)) {
344 REG_WRITE(control, temp);
345 REG_WRITE(base, 0);
346 gma_power_end(dev);
347 }
348
349 /* Unpin the old GEM object */
350 if (gma_crtc->cursor_obj) {
351 gt = container_of(gma_crtc->cursor_obj,
352 struct gtt_range, gem);
353 psb_gtt_unpin(gt);
354 drm_gem_object_put(gma_crtc->cursor_obj);
355 gma_crtc->cursor_obj = NULL;
356 }
357 return 0;
358 }
359
360 /* Currently we only support 64x64 cursors */
361 if (width != 64 || height != 64) {
362 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
363 return -EINVAL;
364 }
365
366 obj = drm_gem_object_lookup(file_priv, handle);
367 if (!obj) {
368 ret = -ENOENT;
369 goto unlock;
370 }
371
372 if (obj->size < width * height * 4) {
373 dev_dbg(dev->dev, "Buffer is too small\n");
374 ret = -ENOMEM;
375 goto unref_cursor;
376 }
377
378 gt = container_of(obj, struct gtt_range, gem);
379
380 /* Pin the memory into the GTT */
381 ret = psb_gtt_pin(gt);
382 if (ret) {
383 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
384 goto unref_cursor;
385 }
386
387 if (dev_priv->ops->cursor_needs_phys) {
388 if (cursor_gt == NULL) {
389 dev_err(dev->dev, "No hardware cursor mem available");
390 ret = -ENOMEM;
391 goto unref_cursor;
392 }
393
394 /* Prevent overflow */
395 if (gt->npage > 4)
396 cursor_pages = 4;
397 else
398 cursor_pages = gt->npage;
399
400 /* Copy the cursor to cursor mem */
401 tmp_dst = dev_priv->vram_addr + cursor_gt->offset;
402 for (i = 0; i < cursor_pages; i++) {
403 tmp_src = kmap(gt->pages[i]);
404 memcpy(tmp_dst, tmp_src, PAGE_SIZE);
405 kunmap(gt->pages[i]);
406 tmp_dst += PAGE_SIZE;
407 }
408
409 addr = gma_crtc->cursor_addr;
410 } else {
411 addr = gt->offset;
412 gma_crtc->cursor_addr = addr;
413 }
414
415 temp = 0;
416 /* set the pipe for the cursor */
417 temp |= (pipe << 28);
418 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
419
420 if (gma_power_begin(dev, false)) {
421 REG_WRITE(control, temp);
422 REG_WRITE(base, addr);
423 gma_power_end(dev);
424 }
425
426 /* unpin the old bo */
427 if (gma_crtc->cursor_obj) {
428 gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem);
429 psb_gtt_unpin(gt);
430 drm_gem_object_put(gma_crtc->cursor_obj);
431 }
432
433 gma_crtc->cursor_obj = obj;
434 unlock:
435 return ret;
436
437 unref_cursor:
438 drm_gem_object_put(obj);
439 return ret;
440 }
441
gma_crtc_cursor_move(struct drm_crtc * crtc,int x,int y)442 int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
443 {
444 struct drm_device *dev = crtc->dev;
445 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
446 int pipe = gma_crtc->pipe;
447 uint32_t temp = 0;
448 uint32_t addr;
449
450 if (x < 0) {
451 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
452 x = -x;
453 }
454 if (y < 0) {
455 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
456 y = -y;
457 }
458
459 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
460 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
461
462 addr = gma_crtc->cursor_addr;
463
464 if (gma_power_begin(dev, false)) {
465 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
466 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
467 gma_power_end(dev);
468 }
469 return 0;
470 }
471
gma_crtc_prepare(struct drm_crtc * crtc)472 void gma_crtc_prepare(struct drm_crtc *crtc)
473 {
474 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
475 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
476 }
477
gma_crtc_commit(struct drm_crtc * crtc)478 void gma_crtc_commit(struct drm_crtc *crtc)
479 {
480 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
481 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
482 }
483
gma_crtc_disable(struct drm_crtc * crtc)484 void gma_crtc_disable(struct drm_crtc *crtc)
485 {
486 struct gtt_range *gt;
487 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
488
489 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
490
491 if (crtc->primary->fb) {
492 gt = to_gtt_range(crtc->primary->fb->obj[0]);
493 psb_gtt_unpin(gt);
494 }
495 }
496
gma_crtc_destroy(struct drm_crtc * crtc)497 void gma_crtc_destroy(struct drm_crtc *crtc)
498 {
499 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
500
501 kfree(gma_crtc->crtc_state);
502 drm_crtc_cleanup(crtc);
503 kfree(gma_crtc);
504 }
505
gma_crtc_page_flip(struct drm_crtc * crtc,struct drm_framebuffer * fb,struct drm_pending_vblank_event * event,uint32_t page_flip_flags,struct drm_modeset_acquire_ctx * ctx)506 int gma_crtc_page_flip(struct drm_crtc *crtc,
507 struct drm_framebuffer *fb,
508 struct drm_pending_vblank_event *event,
509 uint32_t page_flip_flags,
510 struct drm_modeset_acquire_ctx *ctx)
511 {
512 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
513 struct drm_framebuffer *current_fb = crtc->primary->fb;
514 struct drm_framebuffer *old_fb = crtc->primary->old_fb;
515 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
516 struct drm_device *dev = crtc->dev;
517 unsigned long flags;
518 int ret;
519
520 if (!crtc_funcs->mode_set_base)
521 return -EINVAL;
522
523 /* Using mode_set_base requires the new fb to be set already. */
524 crtc->primary->fb = fb;
525
526 if (event) {
527 spin_lock_irqsave(&dev->event_lock, flags);
528
529 WARN_ON(drm_crtc_vblank_get(crtc) != 0);
530
531 gma_crtc->page_flip_event = event;
532 spin_unlock_irqrestore(&dev->event_lock, flags);
533
534 /* Call this locked if we want an event at vblank interrupt. */
535 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
536 if (ret) {
537 spin_lock_irqsave(&dev->event_lock, flags);
538 if (gma_crtc->page_flip_event) {
539 gma_crtc->page_flip_event = NULL;
540 drm_crtc_vblank_put(crtc);
541 }
542 spin_unlock_irqrestore(&dev->event_lock, flags);
543 }
544 } else {
545 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
546 }
547
548 /* Restore previous fb in case of failure. */
549 if (ret)
550 crtc->primary->fb = current_fb;
551
552 return ret;
553 }
554
gma_crtc_set_config(struct drm_mode_set * set,struct drm_modeset_acquire_ctx * ctx)555 int gma_crtc_set_config(struct drm_mode_set *set,
556 struct drm_modeset_acquire_ctx *ctx)
557 {
558 struct drm_device *dev = set->crtc->dev;
559 struct drm_psb_private *dev_priv = dev->dev_private;
560 int ret;
561
562 if (!dev_priv->rpm_enabled)
563 return drm_crtc_helper_set_config(set, ctx);
564
565 pm_runtime_forbid(&dev->pdev->dev);
566 ret = drm_crtc_helper_set_config(set, ctx);
567 pm_runtime_allow(&dev->pdev->dev);
568
569 return ret;
570 }
571
572 /**
573 * Save HW states of given crtc
574 */
gma_crtc_save(struct drm_crtc * crtc)575 void gma_crtc_save(struct drm_crtc *crtc)
576 {
577 struct drm_device *dev = crtc->dev;
578 struct drm_psb_private *dev_priv = dev->dev_private;
579 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
580 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
581 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
582 uint32_t palette_reg;
583 int i;
584
585 if (!crtc_state) {
586 dev_err(dev->dev, "No CRTC state found\n");
587 return;
588 }
589
590 crtc_state->saveDSPCNTR = REG_READ(map->cntr);
591 crtc_state->savePIPECONF = REG_READ(map->conf);
592 crtc_state->savePIPESRC = REG_READ(map->src);
593 crtc_state->saveFP0 = REG_READ(map->fp0);
594 crtc_state->saveFP1 = REG_READ(map->fp1);
595 crtc_state->saveDPLL = REG_READ(map->dpll);
596 crtc_state->saveHTOTAL = REG_READ(map->htotal);
597 crtc_state->saveHBLANK = REG_READ(map->hblank);
598 crtc_state->saveHSYNC = REG_READ(map->hsync);
599 crtc_state->saveVTOTAL = REG_READ(map->vtotal);
600 crtc_state->saveVBLANK = REG_READ(map->vblank);
601 crtc_state->saveVSYNC = REG_READ(map->vsync);
602 crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
603
604 /* NOTE: DSPSIZE DSPPOS only for psb */
605 crtc_state->saveDSPSIZE = REG_READ(map->size);
606 crtc_state->saveDSPPOS = REG_READ(map->pos);
607
608 crtc_state->saveDSPBASE = REG_READ(map->base);
609
610 palette_reg = map->palette;
611 for (i = 0; i < 256; ++i)
612 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
613 }
614
615 /**
616 * Restore HW states of given crtc
617 */
gma_crtc_restore(struct drm_crtc * crtc)618 void gma_crtc_restore(struct drm_crtc *crtc)
619 {
620 struct drm_device *dev = crtc->dev;
621 struct drm_psb_private *dev_priv = dev->dev_private;
622 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
623 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
624 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
625 uint32_t palette_reg;
626 int i;
627
628 if (!crtc_state) {
629 dev_err(dev->dev, "No crtc state\n");
630 return;
631 }
632
633 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
634 REG_WRITE(map->dpll,
635 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
636 REG_READ(map->dpll);
637 udelay(150);
638 }
639
640 REG_WRITE(map->fp0, crtc_state->saveFP0);
641 REG_READ(map->fp0);
642
643 REG_WRITE(map->fp1, crtc_state->saveFP1);
644 REG_READ(map->fp1);
645
646 REG_WRITE(map->dpll, crtc_state->saveDPLL);
647 REG_READ(map->dpll);
648 udelay(150);
649
650 REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
651 REG_WRITE(map->hblank, crtc_state->saveHBLANK);
652 REG_WRITE(map->hsync, crtc_state->saveHSYNC);
653 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
654 REG_WRITE(map->vblank, crtc_state->saveVBLANK);
655 REG_WRITE(map->vsync, crtc_state->saveVSYNC);
656 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
657
658 REG_WRITE(map->size, crtc_state->saveDSPSIZE);
659 REG_WRITE(map->pos, crtc_state->saveDSPPOS);
660
661 REG_WRITE(map->src, crtc_state->savePIPESRC);
662 REG_WRITE(map->base, crtc_state->saveDSPBASE);
663 REG_WRITE(map->conf, crtc_state->savePIPECONF);
664
665 gma_wait_for_vblank(dev);
666
667 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
668 REG_WRITE(map->base, crtc_state->saveDSPBASE);
669
670 gma_wait_for_vblank(dev);
671
672 palette_reg = map->palette;
673 for (i = 0; i < 256; ++i)
674 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
675 }
676
gma_encoder_prepare(struct drm_encoder * encoder)677 void gma_encoder_prepare(struct drm_encoder *encoder)
678 {
679 const struct drm_encoder_helper_funcs *encoder_funcs =
680 encoder->helper_private;
681 /* lvds has its own version of prepare see psb_intel_lvds_prepare */
682 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
683 }
684
gma_encoder_commit(struct drm_encoder * encoder)685 void gma_encoder_commit(struct drm_encoder *encoder)
686 {
687 const struct drm_encoder_helper_funcs *encoder_funcs =
688 encoder->helper_private;
689 /* lvds has its own version of commit see psb_intel_lvds_commit */
690 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
691 }
692
gma_encoder_destroy(struct drm_encoder * encoder)693 void gma_encoder_destroy(struct drm_encoder *encoder)
694 {
695 struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
696
697 drm_encoder_cleanup(encoder);
698 kfree(intel_encoder);
699 }
700
701 /* Currently there is only a 1:1 mapping of encoders and connectors */
gma_best_encoder(struct drm_connector * connector)702 struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
703 {
704 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
705
706 return &gma_encoder->base;
707 }
708
gma_connector_attach_encoder(struct gma_connector * connector,struct gma_encoder * encoder)709 void gma_connector_attach_encoder(struct gma_connector *connector,
710 struct gma_encoder *encoder)
711 {
712 connector->encoder = encoder;
713 drm_connector_attach_encoder(&connector->base,
714 &encoder->base);
715 }
716
717 #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
718
gma_pll_is_valid(struct drm_crtc * crtc,const struct gma_limit_t * limit,struct gma_clock_t * clock)719 bool gma_pll_is_valid(struct drm_crtc *crtc,
720 const struct gma_limit_t *limit,
721 struct gma_clock_t *clock)
722 {
723 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
724 GMA_PLL_INVALID("p1 out of range");
725 if (clock->p < limit->p.min || limit->p.max < clock->p)
726 GMA_PLL_INVALID("p out of range");
727 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
728 GMA_PLL_INVALID("m2 out of range");
729 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
730 GMA_PLL_INVALID("m1 out of range");
731 /* On CDV m1 is always 0 */
732 if (clock->m1 <= clock->m2 && clock->m1 != 0)
733 GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
734 if (clock->m < limit->m.min || limit->m.max < clock->m)
735 GMA_PLL_INVALID("m out of range");
736 if (clock->n < limit->n.min || limit->n.max < clock->n)
737 GMA_PLL_INVALID("n out of range");
738 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
739 GMA_PLL_INVALID("vco out of range");
740 /* XXX: We may need to be checking "Dot clock"
741 * depending on the multiplier, connector, etc.,
742 * rather than just a single range.
743 */
744 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
745 GMA_PLL_INVALID("dot out of range");
746
747 return true;
748 }
749
gma_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)750 bool gma_find_best_pll(const struct gma_limit_t *limit,
751 struct drm_crtc *crtc, int target, int refclk,
752 struct gma_clock_t *best_clock)
753 {
754 struct drm_device *dev = crtc->dev;
755 const struct gma_clock_funcs *clock_funcs =
756 to_gma_crtc(crtc)->clock_funcs;
757 struct gma_clock_t clock;
758 int err = target;
759
760 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
761 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
762 /*
763 * For LVDS, if the panel is on, just rely on its current
764 * settings for dual-channel. We haven't figured out how to
765 * reliably set up different single/dual channel state, if we
766 * even can.
767 */
768 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
769 LVDS_CLKB_POWER_UP)
770 clock.p2 = limit->p2.p2_fast;
771 else
772 clock.p2 = limit->p2.p2_slow;
773 } else {
774 if (target < limit->p2.dot_limit)
775 clock.p2 = limit->p2.p2_slow;
776 else
777 clock.p2 = limit->p2.p2_fast;
778 }
779
780 memset(best_clock, 0, sizeof(*best_clock));
781
782 /* m1 is always 0 on CDV so the outmost loop will run just once */
783 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
784 for (clock.m2 = limit->m2.min;
785 (clock.m2 < clock.m1 || clock.m1 == 0) &&
786 clock.m2 <= limit->m2.max; clock.m2++) {
787 for (clock.n = limit->n.min;
788 clock.n <= limit->n.max; clock.n++) {
789 for (clock.p1 = limit->p1.min;
790 clock.p1 <= limit->p1.max;
791 clock.p1++) {
792 int this_err;
793
794 clock_funcs->clock(refclk, &clock);
795
796 if (!clock_funcs->pll_is_valid(crtc,
797 limit, &clock))
798 continue;
799
800 this_err = abs(clock.dot - target);
801 if (this_err < err) {
802 *best_clock = clock;
803 err = this_err;
804 }
805 }
806 }
807 }
808 }
809
810 return err != target;
811 }
812