1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * MUSB OTG driver core code
4 *
5 * Copyright 2005 Mentor Graphics Corporation
6 * Copyright (C) 2005-2006 by Texas Instruments
7 * Copyright (C) 2006-2007 Nokia Corporation
8 */
9
10 /*
11 * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
12 *
13 * This consists of a Host Controller Driver (HCD) and a peripheral
14 * controller driver implementing the "Gadget" API; OTG support is
15 * in the works. These are normal Linux-USB controller drivers which
16 * use IRQs and have no dedicated thread.
17 *
18 * This version of the driver has only been used with products from
19 * Texas Instruments. Those products integrate the Inventra logic
20 * with other DMA, IRQ, and bus modules, as well as other logic that
21 * needs to be reflected in this driver.
22 *
23 *
24 * NOTE: the original Mentor code here was pretty much a collection
25 * of mechanisms that don't seem to have been fully integrated/working
26 * for *any* Linux kernel version. This version aims at Linux 2.6.now,
27 * Key open issues include:
28 *
29 * - Lack of host-side transaction scheduling, for all transfer types.
30 * The hardware doesn't do it; instead, software must.
31 *
32 * This is not an issue for OTG devices that don't support external
33 * hubs, but for more "normal" USB hosts it's a user issue that the
34 * "multipoint" support doesn't scale in the expected ways. That
35 * includes DaVinci EVM in a common non-OTG mode.
36 *
37 * * Control and bulk use dedicated endpoints, and there's as
38 * yet no mechanism to either (a) reclaim the hardware when
39 * peripherals are NAKing, which gets complicated with bulk
40 * endpoints, or (b) use more than a single bulk endpoint in
41 * each direction.
42 *
43 * RESULT: one device may be perceived as blocking another one.
44 *
45 * * Interrupt and isochronous will dynamically allocate endpoint
46 * hardware, but (a) there's no record keeping for bandwidth;
47 * (b) in the common case that few endpoints are available, there
48 * is no mechanism to reuse endpoints to talk to multiple devices.
49 *
50 * RESULT: At one extreme, bandwidth can be overcommitted in
51 * some hardware configurations, no faults will be reported.
52 * At the other extreme, the bandwidth capabilities which do
53 * exist tend to be severely undercommitted. You can't yet hook
54 * up both a keyboard and a mouse to an external USB hub.
55 */
56
57 /*
58 * This gets many kinds of configuration information:
59 * - Kconfig for everything user-configurable
60 * - platform_device for addressing, irq, and platform_data
61 * - platform_data is mostly for board-specific information
62 * (plus recentrly, SOC or family details)
63 *
64 * Most of the conditional compilation will (someday) vanish.
65 */
66
67 #include <linux/module.h>
68 #include <linux/kernel.h>
69 #include <linux/sched.h>
70 #include <linux/slab.h>
71 #include <linux/list.h>
72 #include <linux/kobject.h>
73 #include <linux/prefetch.h>
74 #include <linux/platform_device.h>
75 #include <linux/io.h>
76 #include <linux/iopoll.h>
77 #include <linux/dma-mapping.h>
78 #include <linux/usb.h>
79 #include <linux/usb/of.h>
80
81 #include "musb_core.h"
82 #include "musb_trace.h"
83
84 #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
85
86
87 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
88 #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
89
90 #define MUSB_VERSION "6.0"
91
92 #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
93
94 #define MUSB_DRIVER_NAME "musb-hdrc"
95 const char musb_driver_name[] = MUSB_DRIVER_NAME;
96
97 MODULE_DESCRIPTION(DRIVER_INFO);
98 MODULE_AUTHOR(DRIVER_AUTHOR);
99 MODULE_LICENSE("GPL");
100 MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
101
102
103 /*-------------------------------------------------------------------------*/
104
dev_to_musb(struct device * dev)105 static inline struct musb *dev_to_musb(struct device *dev)
106 {
107 return dev_get_drvdata(dev);
108 }
109
musb_get_mode(struct device * dev)110 enum musb_mode musb_get_mode(struct device *dev)
111 {
112 enum usb_dr_mode mode;
113
114 mode = usb_get_dr_mode(dev);
115 switch (mode) {
116 case USB_DR_MODE_HOST:
117 return MUSB_HOST;
118 case USB_DR_MODE_PERIPHERAL:
119 return MUSB_PERIPHERAL;
120 case USB_DR_MODE_OTG:
121 case USB_DR_MODE_UNKNOWN:
122 default:
123 return MUSB_OTG;
124 }
125 }
126 EXPORT_SYMBOL_GPL(musb_get_mode);
127
128 /*-------------------------------------------------------------------------*/
129
musb_ulpi_read(struct usb_phy * phy,u32 reg)130 static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
131 {
132 void __iomem *addr = phy->io_priv;
133 int i = 0;
134 u8 r;
135 u8 power;
136 int ret;
137
138 pm_runtime_get_sync(phy->io_dev);
139
140 /* Make sure the transceiver is not in low power mode */
141 power = musb_readb(addr, MUSB_POWER);
142 power &= ~MUSB_POWER_SUSPENDM;
143 musb_writeb(addr, MUSB_POWER, power);
144
145 /* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
146 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
147 */
148
149 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
150 musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
151 MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
152
153 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
154 & MUSB_ULPI_REG_CMPLT)) {
155 i++;
156 if (i == 10000) {
157 ret = -ETIMEDOUT;
158 goto out;
159 }
160
161 }
162 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
163 r &= ~MUSB_ULPI_REG_CMPLT;
164 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
165
166 ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
167
168 out:
169 pm_runtime_put(phy->io_dev);
170
171 return ret;
172 }
173
musb_ulpi_write(struct usb_phy * phy,u32 val,u32 reg)174 static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
175 {
176 void __iomem *addr = phy->io_priv;
177 int i = 0;
178 u8 r = 0;
179 u8 power;
180 int ret = 0;
181
182 pm_runtime_get_sync(phy->io_dev);
183
184 /* Make sure the transceiver is not in low power mode */
185 power = musb_readb(addr, MUSB_POWER);
186 power &= ~MUSB_POWER_SUSPENDM;
187 musb_writeb(addr, MUSB_POWER, power);
188
189 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
190 musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
191 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
192
193 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
194 & MUSB_ULPI_REG_CMPLT)) {
195 i++;
196 if (i == 10000) {
197 ret = -ETIMEDOUT;
198 goto out;
199 }
200 }
201
202 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
203 r &= ~MUSB_ULPI_REG_CMPLT;
204 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
205
206 out:
207 pm_runtime_put(phy->io_dev);
208
209 return ret;
210 }
211
212 static struct usb_phy_io_ops musb_ulpi_access = {
213 .read = musb_ulpi_read,
214 .write = musb_ulpi_write,
215 };
216
217 /*-------------------------------------------------------------------------*/
218
musb_default_fifo_offset(u8 epnum)219 static u32 musb_default_fifo_offset(u8 epnum)
220 {
221 return 0x20 + (epnum * 4);
222 }
223
224 /* "flat" mapping: each endpoint has its own i/o address */
musb_flat_ep_select(void __iomem * mbase,u8 epnum)225 static void musb_flat_ep_select(void __iomem *mbase, u8 epnum)
226 {
227 }
228
musb_flat_ep_offset(u8 epnum,u16 offset)229 static u32 musb_flat_ep_offset(u8 epnum, u16 offset)
230 {
231 return 0x100 + (0x10 * epnum) + offset;
232 }
233
234 /* "indexed" mapping: INDEX register controls register bank select */
musb_indexed_ep_select(void __iomem * mbase,u8 epnum)235 static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum)
236 {
237 musb_writeb(mbase, MUSB_INDEX, epnum);
238 }
239
musb_indexed_ep_offset(u8 epnum,u16 offset)240 static u32 musb_indexed_ep_offset(u8 epnum, u16 offset)
241 {
242 return 0x10 + offset;
243 }
244
musb_default_busctl_offset(u8 epnum,u16 offset)245 static u32 musb_default_busctl_offset(u8 epnum, u16 offset)
246 {
247 return 0x80 + (0x08 * epnum) + offset;
248 }
249
musb_default_readb(void __iomem * addr,u32 offset)250 static u8 musb_default_readb(void __iomem *addr, u32 offset)
251 {
252 u8 data = __raw_readb(addr + offset);
253
254 trace_musb_readb(__builtin_return_address(0), addr, offset, data);
255 return data;
256 }
257
musb_default_writeb(void __iomem * addr,u32 offset,u8 data)258 static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data)
259 {
260 trace_musb_writeb(__builtin_return_address(0), addr, offset, data);
261 __raw_writeb(data, addr + offset);
262 }
263
musb_default_readw(void __iomem * addr,u32 offset)264 static u16 musb_default_readw(void __iomem *addr, u32 offset)
265 {
266 u16 data = __raw_readw(addr + offset);
267
268 trace_musb_readw(__builtin_return_address(0), addr, offset, data);
269 return data;
270 }
271
musb_default_writew(void __iomem * addr,u32 offset,u16 data)272 static void musb_default_writew(void __iomem *addr, u32 offset, u16 data)
273 {
274 trace_musb_writew(__builtin_return_address(0), addr, offset, data);
275 __raw_writew(data, addr + offset);
276 }
277
musb_default_get_toggle(struct musb_qh * qh,int is_out)278 static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out)
279 {
280 void __iomem *epio = qh->hw_ep->regs;
281 u16 csr;
282
283 if (is_out)
284 csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
285 else
286 csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
287
288 return csr;
289 }
290
musb_default_set_toggle(struct musb_qh * qh,int is_out,struct urb * urb)291 static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out,
292 struct urb *urb)
293 {
294 u16 csr;
295 u16 toggle;
296
297 toggle = usb_gettoggle(urb->dev, qh->epnum, is_out);
298
299 if (is_out)
300 csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
301 | MUSB_TXCSR_H_DATATOGGLE)
302 : MUSB_TXCSR_CLRDATATOG;
303 else
304 csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
305 | MUSB_RXCSR_H_DATATOGGLE) : 0;
306
307 return csr;
308 }
309
310 /*
311 * Load an endpoint's FIFO
312 */
musb_default_write_fifo(struct musb_hw_ep * hw_ep,u16 len,const u8 * src)313 static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len,
314 const u8 *src)
315 {
316 struct musb *musb = hw_ep->musb;
317 void __iomem *fifo = hw_ep->fifo;
318
319 if (unlikely(len == 0))
320 return;
321
322 prefetch((u8 *)src);
323
324 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
325 'T', hw_ep->epnum, fifo, len, src);
326
327 /* we can't assume unaligned reads work */
328 if (likely((0x01 & (unsigned long) src) == 0)) {
329 u16 index = 0;
330
331 /* best case is 32bit-aligned source address */
332 if ((0x02 & (unsigned long) src) == 0) {
333 if (len >= 4) {
334 iowrite32_rep(fifo, src + index, len >> 2);
335 index += len & ~0x03;
336 }
337 if (len & 0x02) {
338 __raw_writew(*(u16 *)&src[index], fifo);
339 index += 2;
340 }
341 } else {
342 if (len >= 2) {
343 iowrite16_rep(fifo, src + index, len >> 1);
344 index += len & ~0x01;
345 }
346 }
347 if (len & 0x01)
348 __raw_writeb(src[index], fifo);
349 } else {
350 /* byte aligned */
351 iowrite8_rep(fifo, src, len);
352 }
353 }
354
355 /*
356 * Unload an endpoint's FIFO
357 */
musb_default_read_fifo(struct musb_hw_ep * hw_ep,u16 len,u8 * dst)358 static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
359 {
360 struct musb *musb = hw_ep->musb;
361 void __iomem *fifo = hw_ep->fifo;
362
363 if (unlikely(len == 0))
364 return;
365
366 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
367 'R', hw_ep->epnum, fifo, len, dst);
368
369 /* we can't assume unaligned writes work */
370 if (likely((0x01 & (unsigned long) dst) == 0)) {
371 u16 index = 0;
372
373 /* best case is 32bit-aligned destination address */
374 if ((0x02 & (unsigned long) dst) == 0) {
375 if (len >= 4) {
376 ioread32_rep(fifo, dst, len >> 2);
377 index = len & ~0x03;
378 }
379 if (len & 0x02) {
380 *(u16 *)&dst[index] = __raw_readw(fifo);
381 index += 2;
382 }
383 } else {
384 if (len >= 2) {
385 ioread16_rep(fifo, dst, len >> 1);
386 index = len & ~0x01;
387 }
388 }
389 if (len & 0x01)
390 dst[index] = __raw_readb(fifo);
391 } else {
392 /* byte aligned */
393 ioread8_rep(fifo, dst, len);
394 }
395 }
396
397 /*
398 * Old style IO functions
399 */
400 u8 (*musb_readb)(void __iomem *addr, u32 offset);
401 EXPORT_SYMBOL_GPL(musb_readb);
402
403 void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data);
404 EXPORT_SYMBOL_GPL(musb_writeb);
405
406 u8 (*musb_clearb)(void __iomem *addr, u32 offset);
407 EXPORT_SYMBOL_GPL(musb_clearb);
408
409 u16 (*musb_readw)(void __iomem *addr, u32 offset);
410 EXPORT_SYMBOL_GPL(musb_readw);
411
412 void (*musb_writew)(void __iomem *addr, u32 offset, u16 data);
413 EXPORT_SYMBOL_GPL(musb_writew);
414
415 u16 (*musb_clearw)(void __iomem *addr, u32 offset);
416 EXPORT_SYMBOL_GPL(musb_clearw);
417
musb_readl(void __iomem * addr,u32 offset)418 u32 musb_readl(void __iomem *addr, u32 offset)
419 {
420 u32 data = __raw_readl(addr + offset);
421
422 trace_musb_readl(__builtin_return_address(0), addr, offset, data);
423 return data;
424 }
425 EXPORT_SYMBOL_GPL(musb_readl);
426
musb_writel(void __iomem * addr,u32 offset,u32 data)427 void musb_writel(void __iomem *addr, u32 offset, u32 data)
428 {
429 trace_musb_writel(__builtin_return_address(0), addr, offset, data);
430 __raw_writel(data, addr + offset);
431 }
432 EXPORT_SYMBOL_GPL(musb_writel);
433
434 #ifndef CONFIG_MUSB_PIO_ONLY
435 struct dma_controller *
436 (*musb_dma_controller_create)(struct musb *musb, void __iomem *base);
437 EXPORT_SYMBOL(musb_dma_controller_create);
438
439 void (*musb_dma_controller_destroy)(struct dma_controller *c);
440 EXPORT_SYMBOL(musb_dma_controller_destroy);
441 #endif
442
443 /*
444 * New style IO functions
445 */
musb_read_fifo(struct musb_hw_ep * hw_ep,u16 len,u8 * dst)446 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
447 {
448 return hw_ep->musb->io.read_fifo(hw_ep, len, dst);
449 }
450
musb_write_fifo(struct musb_hw_ep * hw_ep,u16 len,const u8 * src)451 void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
452 {
453 return hw_ep->musb->io.write_fifo(hw_ep, len, src);
454 }
455
musb_read_devctl(struct musb * musb)456 static u8 musb_read_devctl(struct musb *musb)
457 {
458 return musb_readb(musb->mregs, MUSB_DEVCTL);
459 }
460
461 /**
462 * musb_set_host - set and initialize host mode
463 * @musb: musb controller driver data
464 *
465 * At least some musb revisions need to enable devctl session bit in
466 * peripheral mode to switch to host mode. Initializes things to host
467 * mode and sets A_IDLE. SoC glue needs to advance state further
468 * based on phy provided VBUS state.
469 *
470 * Note that the SoC glue code may need to wait for musb to settle
471 * on enable before calling this to avoid babble.
472 */
musb_set_host(struct musb * musb)473 int musb_set_host(struct musb *musb)
474 {
475 int error = 0;
476 u8 devctl;
477
478 if (!musb)
479 return -EINVAL;
480
481 devctl = musb_read_devctl(musb);
482 if (!(devctl & MUSB_DEVCTL_BDEVICE)) {
483 dev_info(musb->controller,
484 "%s: already in host mode: %02x\n",
485 __func__, devctl);
486 goto init_data;
487 }
488
489 devctl |= MUSB_DEVCTL_SESSION;
490 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
491
492 error = readx_poll_timeout(musb_read_devctl, musb, devctl,
493 !(devctl & MUSB_DEVCTL_BDEVICE), 5000,
494 1000000);
495 if (error) {
496 dev_err(musb->controller, "%s: could not set host: %02x\n",
497 __func__, devctl);
498
499 return error;
500 }
501
502 init_data:
503 musb->is_active = 1;
504 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
505 MUSB_HST_MODE(musb);
506
507 return error;
508 }
509 EXPORT_SYMBOL_GPL(musb_set_host);
510
511 /**
512 * musb_set_peripheral - set and initialize peripheral mode
513 * @musb: musb controller driver data
514 *
515 * Clears devctl session bit and initializes things for peripheral
516 * mode and sets B_IDLE. SoC glue needs to advance state further
517 * based on phy provided VBUS state.
518 */
musb_set_peripheral(struct musb * musb)519 int musb_set_peripheral(struct musb *musb)
520 {
521 int error = 0;
522 u8 devctl;
523
524 if (!musb)
525 return -EINVAL;
526
527 devctl = musb_read_devctl(musb);
528 if (devctl & MUSB_DEVCTL_BDEVICE) {
529 dev_info(musb->controller,
530 "%s: already in peripheral mode: %02x\n",
531 __func__, devctl);
532
533 goto init_data;
534 }
535
536 devctl &= ~MUSB_DEVCTL_SESSION;
537 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
538
539 error = readx_poll_timeout(musb_read_devctl, musb, devctl,
540 devctl & MUSB_DEVCTL_BDEVICE, 5000,
541 1000000);
542 if (error) {
543 dev_err(musb->controller, "%s: could not set peripheral: %02x\n",
544 __func__, devctl);
545
546 return error;
547 }
548
549 init_data:
550 musb->is_active = 0;
551 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
552 MUSB_DEV_MODE(musb);
553
554 return error;
555 }
556 EXPORT_SYMBOL_GPL(musb_set_peripheral);
557
558 /*-------------------------------------------------------------------------*/
559
560 /* for high speed test mode; see USB 2.0 spec 7.1.20 */
561 static const u8 musb_test_packet[53] = {
562 /* implicit SYNC then DATA0 to start */
563
564 /* JKJKJKJK x9 */
565 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
566 /* JJKKJJKK x8 */
567 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
568 /* JJJJKKKK x8 */
569 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
570 /* JJJJJJJKKKKKKK x8 */
571 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
572 /* JJJJJJJK x8 */
573 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
574 /* JKKKKKKK x10, JK */
575 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
576
577 /* implicit CRC16 then EOP to end */
578 };
579
musb_load_testpacket(struct musb * musb)580 void musb_load_testpacket(struct musb *musb)
581 {
582 void __iomem *regs = musb->endpoints[0].regs;
583
584 musb_ep_select(musb->mregs, 0);
585 musb_write_fifo(musb->control_ep,
586 sizeof(musb_test_packet), musb_test_packet);
587 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
588 }
589
590 /*-------------------------------------------------------------------------*/
591
592 /*
593 * Handles OTG hnp timeouts, such as b_ase0_brst
594 */
musb_otg_timer_func(struct timer_list * t)595 static void musb_otg_timer_func(struct timer_list *t)
596 {
597 struct musb *musb = from_timer(musb, t, otg_timer);
598 unsigned long flags;
599
600 spin_lock_irqsave(&musb->lock, flags);
601 switch (musb->xceiv->otg->state) {
602 case OTG_STATE_B_WAIT_ACON:
603 musb_dbg(musb,
604 "HNP: b_wait_acon timeout; back to b_peripheral");
605 musb_g_disconnect(musb);
606 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
607 musb->is_active = 0;
608 break;
609 case OTG_STATE_A_SUSPEND:
610 case OTG_STATE_A_WAIT_BCON:
611 musb_dbg(musb, "HNP: %s timeout",
612 usb_otg_state_string(musb->xceiv->otg->state));
613 musb_platform_set_vbus(musb, 0);
614 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
615 break;
616 default:
617 musb_dbg(musb, "HNP: Unhandled mode %s",
618 usb_otg_state_string(musb->xceiv->otg->state));
619 }
620 spin_unlock_irqrestore(&musb->lock, flags);
621 }
622
623 /*
624 * Stops the HNP transition. Caller must take care of locking.
625 */
musb_hnp_stop(struct musb * musb)626 void musb_hnp_stop(struct musb *musb)
627 {
628 struct usb_hcd *hcd = musb->hcd;
629 void __iomem *mbase = musb->mregs;
630 u8 reg;
631
632 musb_dbg(musb, "HNP: stop from %s",
633 usb_otg_state_string(musb->xceiv->otg->state));
634
635 switch (musb->xceiv->otg->state) {
636 case OTG_STATE_A_PERIPHERAL:
637 musb_g_disconnect(musb);
638 musb_dbg(musb, "HNP: back to %s",
639 usb_otg_state_string(musb->xceiv->otg->state));
640 break;
641 case OTG_STATE_B_HOST:
642 musb_dbg(musb, "HNP: Disabling HR");
643 if (hcd)
644 hcd->self.is_b_host = 0;
645 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
646 MUSB_DEV_MODE(musb);
647 reg = musb_readb(mbase, MUSB_POWER);
648 reg |= MUSB_POWER_SUSPENDM;
649 musb_writeb(mbase, MUSB_POWER, reg);
650 /* REVISIT: Start SESSION_REQUEST here? */
651 break;
652 default:
653 musb_dbg(musb, "HNP: Stopping in unknown state %s",
654 usb_otg_state_string(musb->xceiv->otg->state));
655 }
656
657 /*
658 * When returning to A state after HNP, avoid hub_port_rebounce(),
659 * which cause occasional OPT A "Did not receive reset after connect"
660 * errors.
661 */
662 musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
663 }
664
665 static void musb_recover_from_babble(struct musb *musb);
666
musb_handle_intr_resume(struct musb * musb,u8 devctl)667 static void musb_handle_intr_resume(struct musb *musb, u8 devctl)
668 {
669 musb_dbg(musb, "RESUME (%s)",
670 usb_otg_state_string(musb->xceiv->otg->state));
671
672 if (devctl & MUSB_DEVCTL_HM) {
673 switch (musb->xceiv->otg->state) {
674 case OTG_STATE_A_SUSPEND:
675 /* remote wakeup? */
676 musb->port1_status |=
677 (USB_PORT_STAT_C_SUSPEND << 16)
678 | MUSB_PORT_STAT_RESUME;
679 musb->rh_timer = jiffies
680 + msecs_to_jiffies(USB_RESUME_TIMEOUT);
681 musb->xceiv->otg->state = OTG_STATE_A_HOST;
682 musb->is_active = 1;
683 musb_host_resume_root_hub(musb);
684 schedule_delayed_work(&musb->finish_resume_work,
685 msecs_to_jiffies(USB_RESUME_TIMEOUT));
686 break;
687 case OTG_STATE_B_WAIT_ACON:
688 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
689 musb->is_active = 1;
690 MUSB_DEV_MODE(musb);
691 break;
692 default:
693 WARNING("bogus %s RESUME (%s)\n",
694 "host",
695 usb_otg_state_string(musb->xceiv->otg->state));
696 }
697 } else {
698 switch (musb->xceiv->otg->state) {
699 case OTG_STATE_A_SUSPEND:
700 /* possibly DISCONNECT is upcoming */
701 musb->xceiv->otg->state = OTG_STATE_A_HOST;
702 musb_host_resume_root_hub(musb);
703 break;
704 case OTG_STATE_B_WAIT_ACON:
705 case OTG_STATE_B_PERIPHERAL:
706 /* disconnect while suspended? we may
707 * not get a disconnect irq...
708 */
709 if ((devctl & MUSB_DEVCTL_VBUS)
710 != (3 << MUSB_DEVCTL_VBUS_SHIFT)
711 ) {
712 musb->int_usb |= MUSB_INTR_DISCONNECT;
713 musb->int_usb &= ~MUSB_INTR_SUSPEND;
714 break;
715 }
716 musb_g_resume(musb);
717 break;
718 case OTG_STATE_B_IDLE:
719 musb->int_usb &= ~MUSB_INTR_SUSPEND;
720 break;
721 default:
722 WARNING("bogus %s RESUME (%s)\n",
723 "peripheral",
724 usb_otg_state_string(musb->xceiv->otg->state));
725 }
726 }
727 }
728
729 /* return IRQ_HANDLED to tell the caller to return immediately */
musb_handle_intr_sessreq(struct musb * musb,u8 devctl)730 static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl)
731 {
732 void __iomem *mbase = musb->mregs;
733
734 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
735 && (devctl & MUSB_DEVCTL_BDEVICE)) {
736 musb_dbg(musb, "SessReq while on B state");
737 return IRQ_HANDLED;
738 }
739
740 musb_dbg(musb, "SESSION_REQUEST (%s)",
741 usb_otg_state_string(musb->xceiv->otg->state));
742
743 /* IRQ arrives from ID pin sense or (later, if VBUS power
744 * is removed) SRP. responses are time critical:
745 * - turn on VBUS (with silicon-specific mechanism)
746 * - go through A_WAIT_VRISE
747 * - ... to A_WAIT_BCON.
748 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
749 */
750 musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
751 musb->ep0_stage = MUSB_EP0_START;
752 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
753 MUSB_HST_MODE(musb);
754 musb_platform_set_vbus(musb, 1);
755
756 return IRQ_NONE;
757 }
758
musb_handle_intr_vbuserr(struct musb * musb,u8 devctl)759 static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl)
760 {
761 int ignore = 0;
762
763 /* During connection as an A-Device, we may see a short
764 * current spikes causing voltage drop, because of cable
765 * and peripheral capacitance combined with vbus draw.
766 * (So: less common with truly self-powered devices, where
767 * vbus doesn't act like a power supply.)
768 *
769 * Such spikes are short; usually less than ~500 usec, max
770 * of ~2 msec. That is, they're not sustained overcurrent
771 * errors, though they're reported using VBUSERROR irqs.
772 *
773 * Workarounds: (a) hardware: use self powered devices.
774 * (b) software: ignore non-repeated VBUS errors.
775 *
776 * REVISIT: do delays from lots of DEBUG_KERNEL checks
777 * make trouble here, keeping VBUS < 4.4V ?
778 */
779 switch (musb->xceiv->otg->state) {
780 case OTG_STATE_A_HOST:
781 /* recovery is dicey once we've gotten past the
782 * initial stages of enumeration, but if VBUS
783 * stayed ok at the other end of the link, and
784 * another reset is due (at least for high speed,
785 * to redo the chirp etc), it might work OK...
786 */
787 case OTG_STATE_A_WAIT_BCON:
788 case OTG_STATE_A_WAIT_VRISE:
789 if (musb->vbuserr_retry) {
790 void __iomem *mbase = musb->mregs;
791
792 musb->vbuserr_retry--;
793 ignore = 1;
794 devctl |= MUSB_DEVCTL_SESSION;
795 musb_writeb(mbase, MUSB_DEVCTL, devctl);
796 } else {
797 musb->port1_status |=
798 USB_PORT_STAT_OVERCURRENT
799 | (USB_PORT_STAT_C_OVERCURRENT << 16);
800 }
801 break;
802 default:
803 break;
804 }
805
806 dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller,
807 "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
808 usb_otg_state_string(musb->xceiv->otg->state),
809 devctl,
810 ({ char *s;
811 switch (devctl & MUSB_DEVCTL_VBUS) {
812 case 0 << MUSB_DEVCTL_VBUS_SHIFT:
813 s = "<SessEnd"; break;
814 case 1 << MUSB_DEVCTL_VBUS_SHIFT:
815 s = "<AValid"; break;
816 case 2 << MUSB_DEVCTL_VBUS_SHIFT:
817 s = "<VBusValid"; break;
818 /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
819 default:
820 s = "VALID"; break;
821 } s; }),
822 VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
823 musb->port1_status);
824
825 /* go through A_WAIT_VFALL then start a new session */
826 if (!ignore)
827 musb_platform_set_vbus(musb, 0);
828 }
829
musb_handle_intr_suspend(struct musb * musb,u8 devctl)830 static void musb_handle_intr_suspend(struct musb *musb, u8 devctl)
831 {
832 musb_dbg(musb, "SUSPEND (%s) devctl %02x",
833 usb_otg_state_string(musb->xceiv->otg->state), devctl);
834
835 switch (musb->xceiv->otg->state) {
836 case OTG_STATE_A_PERIPHERAL:
837 /* We also come here if the cable is removed, since
838 * this silicon doesn't report ID-no-longer-grounded.
839 *
840 * We depend on T(a_wait_bcon) to shut us down, and
841 * hope users don't do anything dicey during this
842 * undesired detour through A_WAIT_BCON.
843 */
844 musb_hnp_stop(musb);
845 musb_host_resume_root_hub(musb);
846 musb_root_disconnect(musb);
847 musb_platform_try_idle(musb, jiffies
848 + msecs_to_jiffies(musb->a_wait_bcon
849 ? : OTG_TIME_A_WAIT_BCON));
850
851 break;
852 case OTG_STATE_B_IDLE:
853 if (!musb->is_active)
854 break;
855 fallthrough;
856 case OTG_STATE_B_PERIPHERAL:
857 musb_g_suspend(musb);
858 musb->is_active = musb->g.b_hnp_enable;
859 if (musb->is_active) {
860 musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
861 musb_dbg(musb, "HNP: Setting timer for b_ase0_brst");
862 mod_timer(&musb->otg_timer, jiffies
863 + msecs_to_jiffies(
864 OTG_TIME_B_ASE0_BRST));
865 }
866 break;
867 case OTG_STATE_A_WAIT_BCON:
868 if (musb->a_wait_bcon != 0)
869 musb_platform_try_idle(musb, jiffies
870 + msecs_to_jiffies(musb->a_wait_bcon));
871 break;
872 case OTG_STATE_A_HOST:
873 musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
874 musb->is_active = musb->hcd->self.b_hnp_enable;
875 break;
876 case OTG_STATE_B_HOST:
877 /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
878 musb_dbg(musb, "REVISIT: SUSPEND as B_HOST");
879 break;
880 default:
881 /* "should not happen" */
882 musb->is_active = 0;
883 break;
884 }
885 }
886
musb_handle_intr_connect(struct musb * musb,u8 devctl,u8 int_usb)887 static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb)
888 {
889 struct usb_hcd *hcd = musb->hcd;
890
891 musb->is_active = 1;
892 musb->ep0_stage = MUSB_EP0_START;
893
894 musb->intrtxe = musb->epmask;
895 musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
896 musb->intrrxe = musb->epmask & 0xfffe;
897 musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
898 musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
899 musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
900 |USB_PORT_STAT_HIGH_SPEED
901 |USB_PORT_STAT_ENABLE
902 );
903 musb->port1_status |= USB_PORT_STAT_CONNECTION
904 |(USB_PORT_STAT_C_CONNECTION << 16);
905
906 /* high vs full speed is just a guess until after reset */
907 if (devctl & MUSB_DEVCTL_LSDEV)
908 musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
909
910 /* indicate new connection to OTG machine */
911 switch (musb->xceiv->otg->state) {
912 case OTG_STATE_B_PERIPHERAL:
913 if (int_usb & MUSB_INTR_SUSPEND) {
914 musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host");
915 int_usb &= ~MUSB_INTR_SUSPEND;
916 goto b_host;
917 } else
918 musb_dbg(musb, "CONNECT as b_peripheral???");
919 break;
920 case OTG_STATE_B_WAIT_ACON:
921 musb_dbg(musb, "HNP: CONNECT, now b_host");
922 b_host:
923 musb->xceiv->otg->state = OTG_STATE_B_HOST;
924 if (musb->hcd)
925 musb->hcd->self.is_b_host = 1;
926 del_timer(&musb->otg_timer);
927 break;
928 default:
929 if ((devctl & MUSB_DEVCTL_VBUS)
930 == (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
931 musb->xceiv->otg->state = OTG_STATE_A_HOST;
932 if (hcd)
933 hcd->self.is_b_host = 0;
934 }
935 break;
936 }
937
938 musb_host_poke_root_hub(musb);
939
940 musb_dbg(musb, "CONNECT (%s) devctl %02x",
941 usb_otg_state_string(musb->xceiv->otg->state), devctl);
942 }
943
musb_handle_intr_disconnect(struct musb * musb,u8 devctl)944 static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl)
945 {
946 musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x",
947 usb_otg_state_string(musb->xceiv->otg->state),
948 MUSB_MODE(musb), devctl);
949
950 switch (musb->xceiv->otg->state) {
951 case OTG_STATE_A_HOST:
952 case OTG_STATE_A_SUSPEND:
953 musb_host_resume_root_hub(musb);
954 musb_root_disconnect(musb);
955 if (musb->a_wait_bcon != 0)
956 musb_platform_try_idle(musb, jiffies
957 + msecs_to_jiffies(musb->a_wait_bcon));
958 break;
959 case OTG_STATE_B_HOST:
960 /* REVISIT this behaves for "real disconnect"
961 * cases; make sure the other transitions from
962 * from B_HOST act right too. The B_HOST code
963 * in hnp_stop() is currently not used...
964 */
965 musb_root_disconnect(musb);
966 if (musb->hcd)
967 musb->hcd->self.is_b_host = 0;
968 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
969 MUSB_DEV_MODE(musb);
970 musb_g_disconnect(musb);
971 break;
972 case OTG_STATE_A_PERIPHERAL:
973 musb_hnp_stop(musb);
974 musb_root_disconnect(musb);
975 fallthrough;
976 case OTG_STATE_B_WAIT_ACON:
977 case OTG_STATE_B_PERIPHERAL:
978 case OTG_STATE_B_IDLE:
979 musb_g_disconnect(musb);
980 break;
981 default:
982 WARNING("unhandled DISCONNECT transition (%s)\n",
983 usb_otg_state_string(musb->xceiv->otg->state));
984 break;
985 }
986 }
987
988 /*
989 * mentor saves a bit: bus reset and babble share the same irq.
990 * only host sees babble; only peripheral sees bus reset.
991 */
musb_handle_intr_reset(struct musb * musb)992 static void musb_handle_intr_reset(struct musb *musb)
993 {
994 if (is_host_active(musb)) {
995 /*
996 * When BABBLE happens what we can depends on which
997 * platform MUSB is running, because some platforms
998 * implemented proprietary means for 'recovering' from
999 * Babble conditions. One such platform is AM335x. In
1000 * most cases, however, the only thing we can do is
1001 * drop the session.
1002 */
1003 dev_err(musb->controller, "Babble\n");
1004 musb_recover_from_babble(musb);
1005 } else {
1006 musb_dbg(musb, "BUS RESET as %s",
1007 usb_otg_state_string(musb->xceiv->otg->state));
1008 switch (musb->xceiv->otg->state) {
1009 case OTG_STATE_A_SUSPEND:
1010 musb_g_reset(musb);
1011 fallthrough;
1012 case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
1013 /* never use invalid T(a_wait_bcon) */
1014 musb_dbg(musb, "HNP: in %s, %d msec timeout",
1015 usb_otg_state_string(musb->xceiv->otg->state),
1016 TA_WAIT_BCON(musb));
1017 mod_timer(&musb->otg_timer, jiffies
1018 + msecs_to_jiffies(TA_WAIT_BCON(musb)));
1019 break;
1020 case OTG_STATE_A_PERIPHERAL:
1021 del_timer(&musb->otg_timer);
1022 musb_g_reset(musb);
1023 break;
1024 case OTG_STATE_B_WAIT_ACON:
1025 musb_dbg(musb, "HNP: RESET (%s), to b_peripheral",
1026 usb_otg_state_string(musb->xceiv->otg->state));
1027 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
1028 musb_g_reset(musb);
1029 break;
1030 case OTG_STATE_B_IDLE:
1031 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
1032 fallthrough;
1033 case OTG_STATE_B_PERIPHERAL:
1034 musb_g_reset(musb);
1035 break;
1036 default:
1037 musb_dbg(musb, "Unhandled BUS RESET as %s",
1038 usb_otg_state_string(musb->xceiv->otg->state));
1039 }
1040 }
1041 }
1042
1043 /*
1044 * Interrupt Service Routine to record USB "global" interrupts.
1045 * Since these do not happen often and signify things of
1046 * paramount importance, it seems OK to check them individually;
1047 * the order of the tests is specified in the manual
1048 *
1049 * @param musb instance pointer
1050 * @param int_usb register contents
1051 * @param devctl
1052 */
1053
musb_stage0_irq(struct musb * musb,u8 int_usb,u8 devctl)1054 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
1055 u8 devctl)
1056 {
1057 irqreturn_t handled = IRQ_NONE;
1058
1059 musb_dbg(musb, "<== DevCtl=%02x, int_usb=0x%x", devctl, int_usb);
1060
1061 /* in host mode, the peripheral may issue remote wakeup.
1062 * in peripheral mode, the host may resume the link.
1063 * spurious RESUME irqs happen too, paired with SUSPEND.
1064 */
1065 if (int_usb & MUSB_INTR_RESUME) {
1066 musb_handle_intr_resume(musb, devctl);
1067 handled = IRQ_HANDLED;
1068 }
1069
1070 /* see manual for the order of the tests */
1071 if (int_usb & MUSB_INTR_SESSREQ) {
1072 if (musb_handle_intr_sessreq(musb, devctl))
1073 return IRQ_HANDLED;
1074 handled = IRQ_HANDLED;
1075 }
1076
1077 if (int_usb & MUSB_INTR_VBUSERROR) {
1078 musb_handle_intr_vbuserr(musb, devctl);
1079 handled = IRQ_HANDLED;
1080 }
1081
1082 if (int_usb & MUSB_INTR_SUSPEND) {
1083 musb_handle_intr_suspend(musb, devctl);
1084 handled = IRQ_HANDLED;
1085 }
1086
1087 if (int_usb & MUSB_INTR_CONNECT) {
1088 musb_handle_intr_connect(musb, devctl, int_usb);
1089 handled = IRQ_HANDLED;
1090 }
1091
1092 if (int_usb & MUSB_INTR_DISCONNECT) {
1093 musb_handle_intr_disconnect(musb, devctl);
1094 handled = IRQ_HANDLED;
1095 }
1096
1097 if (int_usb & MUSB_INTR_RESET) {
1098 musb_handle_intr_reset(musb);
1099 handled = IRQ_HANDLED;
1100 }
1101
1102 #if 0
1103 /* REVISIT ... this would be for multiplexing periodic endpoints, or
1104 * supporting transfer phasing to prevent exceeding ISO bandwidth
1105 * limits of a given frame or microframe.
1106 *
1107 * It's not needed for peripheral side, which dedicates endpoints;
1108 * though it _might_ use SOF irqs for other purposes.
1109 *
1110 * And it's not currently needed for host side, which also dedicates
1111 * endpoints, relies on TX/RX interval registers, and isn't claimed
1112 * to support ISO transfers yet.
1113 */
1114 if (int_usb & MUSB_INTR_SOF) {
1115 void __iomem *mbase = musb->mregs;
1116 struct musb_hw_ep *ep;
1117 u8 epnum;
1118 u16 frame;
1119
1120 dev_dbg(musb->controller, "START_OF_FRAME\n");
1121 handled = IRQ_HANDLED;
1122
1123 /* start any periodic Tx transfers waiting for current frame */
1124 frame = musb_readw(mbase, MUSB_FRAME);
1125 ep = musb->endpoints;
1126 for (epnum = 1; (epnum < musb->nr_endpoints)
1127 && (musb->epmask >= (1 << epnum));
1128 epnum++, ep++) {
1129 /*
1130 * FIXME handle framecounter wraps (12 bits)
1131 * eliminate duplicated StartUrb logic
1132 */
1133 if (ep->dwWaitFrame >= frame) {
1134 ep->dwWaitFrame = 0;
1135 pr_debug("SOF --> periodic TX%s on %d\n",
1136 ep->tx_channel ? " DMA" : "",
1137 epnum);
1138 if (!ep->tx_channel)
1139 musb_h_tx_start(musb, epnum);
1140 else
1141 cppi_hostdma_start(musb, epnum);
1142 }
1143 } /* end of for loop */
1144 }
1145 #endif
1146
1147 schedule_delayed_work(&musb->irq_work, 0);
1148
1149 return handled;
1150 }
1151
1152 /*-------------------------------------------------------------------------*/
1153
musb_disable_interrupts(struct musb * musb)1154 static void musb_disable_interrupts(struct musb *musb)
1155 {
1156 void __iomem *mbase = musb->mregs;
1157
1158 /* disable interrupts */
1159 musb_writeb(mbase, MUSB_INTRUSBE, 0);
1160 musb->intrtxe = 0;
1161 musb_writew(mbase, MUSB_INTRTXE, 0);
1162 musb->intrrxe = 0;
1163 musb_writew(mbase, MUSB_INTRRXE, 0);
1164
1165 /* flush pending interrupts */
1166 musb_clearb(mbase, MUSB_INTRUSB);
1167 musb_clearw(mbase, MUSB_INTRTX);
1168 musb_clearw(mbase, MUSB_INTRRX);
1169 }
1170
musb_enable_interrupts(struct musb * musb)1171 static void musb_enable_interrupts(struct musb *musb)
1172 {
1173 void __iomem *regs = musb->mregs;
1174
1175 /* Set INT enable registers, enable interrupts */
1176 musb->intrtxe = musb->epmask;
1177 musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
1178 musb->intrrxe = musb->epmask & 0xfffe;
1179 musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
1180 musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
1181
1182 }
1183
1184 /*
1185 * Program the HDRC to start (enable interrupts, dma, etc.).
1186 */
musb_start(struct musb * musb)1187 void musb_start(struct musb *musb)
1188 {
1189 void __iomem *regs = musb->mregs;
1190 u8 devctl = musb_readb(regs, MUSB_DEVCTL);
1191 u8 power;
1192
1193 musb_dbg(musb, "<== devctl %02x", devctl);
1194
1195 musb_enable_interrupts(musb);
1196 musb_writeb(regs, MUSB_TESTMODE, 0);
1197
1198 power = MUSB_POWER_ISOUPDATE;
1199 /*
1200 * treating UNKNOWN as unspecified maximum speed, in which case
1201 * we will default to high-speed.
1202 */
1203 if (musb->config->maximum_speed == USB_SPEED_HIGH ||
1204 musb->config->maximum_speed == USB_SPEED_UNKNOWN)
1205 power |= MUSB_POWER_HSENAB;
1206 musb_writeb(regs, MUSB_POWER, power);
1207
1208 musb->is_active = 0;
1209 devctl = musb_readb(regs, MUSB_DEVCTL);
1210 devctl &= ~MUSB_DEVCTL_SESSION;
1211
1212 /* session started after:
1213 * (a) ID-grounded irq, host mode;
1214 * (b) vbus present/connect IRQ, peripheral mode;
1215 * (c) peripheral initiates, using SRP
1216 */
1217 if (musb->port_mode != MUSB_HOST &&
1218 musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
1219 (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
1220 musb->is_active = 1;
1221 } else {
1222 devctl |= MUSB_DEVCTL_SESSION;
1223 }
1224
1225 musb_platform_enable(musb);
1226 musb_writeb(regs, MUSB_DEVCTL, devctl);
1227 }
1228
1229 /*
1230 * Make the HDRC stop (disable interrupts, etc.);
1231 * reversible by musb_start
1232 * called on gadget driver unregister
1233 * with controller locked, irqs blocked
1234 * acts as a NOP unless some role activated the hardware
1235 */
musb_stop(struct musb * musb)1236 void musb_stop(struct musb *musb)
1237 {
1238 /* stop IRQs, timers, ... */
1239 musb_platform_disable(musb);
1240 musb_disable_interrupts(musb);
1241 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
1242
1243 /* FIXME
1244 * - mark host and/or peripheral drivers unusable/inactive
1245 * - disable DMA (and enable it in HdrcStart)
1246 * - make sure we can musb_start() after musb_stop(); with
1247 * OTG mode, gadget driver module rmmod/modprobe cycles that
1248 * - ...
1249 */
1250 musb_platform_try_idle(musb, 0);
1251 }
1252
1253 /*-------------------------------------------------------------------------*/
1254
1255 /*
1256 * The silicon either has hard-wired endpoint configurations, or else
1257 * "dynamic fifo" sizing. The driver has support for both, though at this
1258 * writing only the dynamic sizing is very well tested. Since we switched
1259 * away from compile-time hardware parameters, we can no longer rely on
1260 * dead code elimination to leave only the relevant one in the object file.
1261 *
1262 * We don't currently use dynamic fifo setup capability to do anything
1263 * more than selecting one of a bunch of predefined configurations.
1264 */
1265 static ushort fifo_mode;
1266
1267 /* "modprobe ... fifo_mode=1" etc */
1268 module_param(fifo_mode, ushort, 0);
1269 MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
1270
1271 /*
1272 * tables defining fifo_mode values. define more if you like.
1273 * for host side, make sure both halves of ep1 are set up.
1274 */
1275
1276 /* mode 0 - fits in 2KB */
1277 static struct musb_fifo_cfg mode_0_cfg[] = {
1278 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1279 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1280 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
1281 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1282 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1283 };
1284
1285 /* mode 1 - fits in 4KB */
1286 static struct musb_fifo_cfg mode_1_cfg[] = {
1287 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1288 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1289 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1290 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1291 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1292 };
1293
1294 /* mode 2 - fits in 4KB */
1295 static struct musb_fifo_cfg mode_2_cfg[] = {
1296 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1297 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1298 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1299 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1300 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 960, },
1301 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 1024, },
1302 };
1303
1304 /* mode 3 - fits in 4KB */
1305 static struct musb_fifo_cfg mode_3_cfg[] = {
1306 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1307 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1308 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1309 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1310 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1311 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1312 };
1313
1314 /* mode 4 - fits in 16KB */
1315 static struct musb_fifo_cfg mode_4_cfg[] = {
1316 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1317 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1318 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1319 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1320 { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
1321 { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
1322 { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
1323 { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
1324 { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
1325 { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
1326 { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, },
1327 { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, },
1328 { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
1329 { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
1330 { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, },
1331 { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
1332 { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
1333 { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
1334 { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
1335 { .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
1336 { .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
1337 { .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
1338 { .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
1339 { .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
1340 { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
1341 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1342 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1343 };
1344
1345 /* mode 5 - fits in 8KB */
1346 static struct musb_fifo_cfg mode_5_cfg[] = {
1347 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1348 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1349 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1350 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1351 { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
1352 { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
1353 { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
1354 { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
1355 { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
1356 { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
1357 { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, },
1358 { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, },
1359 { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, },
1360 { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, },
1361 { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, },
1362 { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, },
1363 { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, },
1364 { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, },
1365 { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, },
1366 { .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, },
1367 { .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, },
1368 { .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, },
1369 { .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, },
1370 { .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, },
1371 { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
1372 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1373 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1374 };
1375
1376 /*
1377 * configure a fifo; for non-shared endpoints, this may be called
1378 * once for a tx fifo and once for an rx fifo.
1379 *
1380 * returns negative errno or offset for next fifo.
1381 */
1382 static int
fifo_setup(struct musb * musb,struct musb_hw_ep * hw_ep,const struct musb_fifo_cfg * cfg,u16 offset)1383 fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
1384 const struct musb_fifo_cfg *cfg, u16 offset)
1385 {
1386 void __iomem *mbase = musb->mregs;
1387 int size = 0;
1388 u16 maxpacket = cfg->maxpacket;
1389 u16 c_off = offset >> 3;
1390 u8 c_size;
1391
1392 /* expect hw_ep has already been zero-initialized */
1393
1394 size = ffs(max(maxpacket, (u16) 8)) - 1;
1395 maxpacket = 1 << size;
1396
1397 c_size = size - 3;
1398 if (cfg->mode == BUF_DOUBLE) {
1399 if ((offset + (maxpacket << 1)) >
1400 (1 << (musb->config->ram_bits + 2)))
1401 return -EMSGSIZE;
1402 c_size |= MUSB_FIFOSZ_DPB;
1403 } else {
1404 if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
1405 return -EMSGSIZE;
1406 }
1407
1408 /* configure the FIFO */
1409 musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
1410
1411 /* EP0 reserved endpoint for control, bidirectional;
1412 * EP1 reserved for bulk, two unidirectional halves.
1413 */
1414 if (hw_ep->epnum == 1)
1415 musb->bulk_ep = hw_ep;
1416 /* REVISIT error check: be sure ep0 can both rx and tx ... */
1417 switch (cfg->style) {
1418 case FIFO_TX:
1419 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
1420 musb_writew(mbase, MUSB_TXFIFOADD, c_off);
1421 hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1422 hw_ep->max_packet_sz_tx = maxpacket;
1423 break;
1424 case FIFO_RX:
1425 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
1426 musb_writew(mbase, MUSB_RXFIFOADD, c_off);
1427 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1428 hw_ep->max_packet_sz_rx = maxpacket;
1429 break;
1430 case FIFO_RXTX:
1431 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
1432 musb_writew(mbase, MUSB_TXFIFOADD, c_off);
1433 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1434 hw_ep->max_packet_sz_rx = maxpacket;
1435
1436 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
1437 musb_writew(mbase, MUSB_RXFIFOADD, c_off);
1438 hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
1439 hw_ep->max_packet_sz_tx = maxpacket;
1440
1441 hw_ep->is_shared_fifo = true;
1442 break;
1443 }
1444
1445 /* NOTE rx and tx endpoint irqs aren't managed separately,
1446 * which happens to be ok
1447 */
1448 musb->epmask |= (1 << hw_ep->epnum);
1449
1450 return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
1451 }
1452
1453 static struct musb_fifo_cfg ep0_cfg = {
1454 .style = FIFO_RXTX, .maxpacket = 64,
1455 };
1456
ep_config_from_table(struct musb * musb)1457 static int ep_config_from_table(struct musb *musb)
1458 {
1459 const struct musb_fifo_cfg *cfg;
1460 unsigned i, n;
1461 int offset;
1462 struct musb_hw_ep *hw_ep = musb->endpoints;
1463
1464 if (musb->config->fifo_cfg) {
1465 cfg = musb->config->fifo_cfg;
1466 n = musb->config->fifo_cfg_size;
1467 goto done;
1468 }
1469
1470 switch (fifo_mode) {
1471 default:
1472 fifo_mode = 0;
1473 fallthrough;
1474 case 0:
1475 cfg = mode_0_cfg;
1476 n = ARRAY_SIZE(mode_0_cfg);
1477 break;
1478 case 1:
1479 cfg = mode_1_cfg;
1480 n = ARRAY_SIZE(mode_1_cfg);
1481 break;
1482 case 2:
1483 cfg = mode_2_cfg;
1484 n = ARRAY_SIZE(mode_2_cfg);
1485 break;
1486 case 3:
1487 cfg = mode_3_cfg;
1488 n = ARRAY_SIZE(mode_3_cfg);
1489 break;
1490 case 4:
1491 cfg = mode_4_cfg;
1492 n = ARRAY_SIZE(mode_4_cfg);
1493 break;
1494 case 5:
1495 cfg = mode_5_cfg;
1496 n = ARRAY_SIZE(mode_5_cfg);
1497 break;
1498 }
1499
1500 pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode);
1501
1502
1503 done:
1504 offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
1505 /* assert(offset > 0) */
1506
1507 /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would
1508 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
1509 */
1510
1511 for (i = 0; i < n; i++) {
1512 u8 epn = cfg->hw_ep_num;
1513
1514 if (epn >= musb->config->num_eps) {
1515 pr_debug("%s: invalid ep %d\n",
1516 musb_driver_name, epn);
1517 return -EINVAL;
1518 }
1519 offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
1520 if (offset < 0) {
1521 pr_debug("%s: mem overrun, ep %d\n",
1522 musb_driver_name, epn);
1523 return offset;
1524 }
1525 epn++;
1526 musb->nr_endpoints = max(epn, musb->nr_endpoints);
1527 }
1528
1529 pr_debug("%s: %d/%d max ep, %d/%d memory\n",
1530 musb_driver_name,
1531 n + 1, musb->config->num_eps * 2 - 1,
1532 offset, (1 << (musb->config->ram_bits + 2)));
1533
1534 if (!musb->bulk_ep) {
1535 pr_debug("%s: missing bulk\n", musb_driver_name);
1536 return -EINVAL;
1537 }
1538
1539 return 0;
1540 }
1541
1542
1543 /*
1544 * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
1545 * @param musb the controller
1546 */
ep_config_from_hw(struct musb * musb)1547 static int ep_config_from_hw(struct musb *musb)
1548 {
1549 u8 epnum = 0;
1550 struct musb_hw_ep *hw_ep;
1551 void __iomem *mbase = musb->mregs;
1552 int ret = 0;
1553
1554 musb_dbg(musb, "<== static silicon ep config");
1555
1556 /* FIXME pick up ep0 maxpacket size */
1557
1558 for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
1559 musb_ep_select(mbase, epnum);
1560 hw_ep = musb->endpoints + epnum;
1561
1562 ret = musb_read_fifosize(musb, hw_ep, epnum);
1563 if (ret < 0)
1564 break;
1565
1566 /* FIXME set up hw_ep->{rx,tx}_double_buffered */
1567
1568 /* pick an RX/TX endpoint for bulk */
1569 if (hw_ep->max_packet_sz_tx < 512
1570 || hw_ep->max_packet_sz_rx < 512)
1571 continue;
1572
1573 /* REVISIT: this algorithm is lazy, we should at least
1574 * try to pick a double buffered endpoint.
1575 */
1576 if (musb->bulk_ep)
1577 continue;
1578 musb->bulk_ep = hw_ep;
1579 }
1580
1581 if (!musb->bulk_ep) {
1582 pr_debug("%s: missing bulk\n", musb_driver_name);
1583 return -EINVAL;
1584 }
1585
1586 return 0;
1587 }
1588
1589 enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
1590
1591 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
1592 * configure endpoints, or take their config from silicon
1593 */
musb_core_init(u16 musb_type,struct musb * musb)1594 static int musb_core_init(u16 musb_type, struct musb *musb)
1595 {
1596 u8 reg;
1597 char *type;
1598 char aInfo[90];
1599 void __iomem *mbase = musb->mregs;
1600 int status = 0;
1601 int i;
1602
1603 /* log core options (read using indexed model) */
1604 reg = musb_read_configdata(mbase);
1605
1606 strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
1607 if (reg & MUSB_CONFIGDATA_DYNFIFO) {
1608 strcat(aInfo, ", dyn FIFOs");
1609 musb->dyn_fifo = true;
1610 }
1611 if (reg & MUSB_CONFIGDATA_MPRXE) {
1612 strcat(aInfo, ", bulk combine");
1613 musb->bulk_combine = true;
1614 }
1615 if (reg & MUSB_CONFIGDATA_MPTXE) {
1616 strcat(aInfo, ", bulk split");
1617 musb->bulk_split = true;
1618 }
1619 if (reg & MUSB_CONFIGDATA_HBRXE) {
1620 strcat(aInfo, ", HB-ISO Rx");
1621 musb->hb_iso_rx = true;
1622 }
1623 if (reg & MUSB_CONFIGDATA_HBTXE) {
1624 strcat(aInfo, ", HB-ISO Tx");
1625 musb->hb_iso_tx = true;
1626 }
1627 if (reg & MUSB_CONFIGDATA_SOFTCONE)
1628 strcat(aInfo, ", SoftConn");
1629
1630 pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
1631
1632 if (MUSB_CONTROLLER_MHDRC == musb_type) {
1633 musb->is_multipoint = 1;
1634 type = "M";
1635 } else {
1636 musb->is_multipoint = 0;
1637 type = "";
1638 if (IS_ENABLED(CONFIG_USB) &&
1639 !IS_ENABLED(CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB)) {
1640 pr_err("%s: kernel must disable external hubs, please fix the configuration\n",
1641 musb_driver_name);
1642 }
1643 }
1644
1645 /* log release info */
1646 musb->hwvers = musb_readw(mbase, MUSB_HWVERS);
1647 pr_debug("%s: %sHDRC RTL version %d.%d%s\n",
1648 musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers),
1649 MUSB_HWVERS_MINOR(musb->hwvers),
1650 (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
1651
1652 /* configure ep0 */
1653 musb_configure_ep0(musb);
1654
1655 /* discover endpoint configuration */
1656 musb->nr_endpoints = 1;
1657 musb->epmask = 1;
1658
1659 if (musb->dyn_fifo)
1660 status = ep_config_from_table(musb);
1661 else
1662 status = ep_config_from_hw(musb);
1663
1664 if (status < 0)
1665 return status;
1666
1667 /* finish init, and print endpoint config */
1668 for (i = 0; i < musb->nr_endpoints; i++) {
1669 struct musb_hw_ep *hw_ep = musb->endpoints + i;
1670
1671 hw_ep->fifo = musb->io.fifo_offset(i) + mbase;
1672 #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
1673 if (musb->ops->quirks & MUSB_IN_TUSB) {
1674 hw_ep->fifo_async = musb->async + 0x400 +
1675 musb->io.fifo_offset(i);
1676 hw_ep->fifo_sync = musb->sync + 0x400 +
1677 musb->io.fifo_offset(i);
1678 hw_ep->fifo_sync_va =
1679 musb->sync_va + 0x400 + musb->io.fifo_offset(i);
1680
1681 if (i == 0)
1682 hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
1683 else
1684 hw_ep->conf = mbase + 0x400 +
1685 (((i - 1) & 0xf) << 2);
1686 }
1687 #endif
1688
1689 hw_ep->regs = musb->io.ep_offset(i, 0) + mbase;
1690 hw_ep->rx_reinit = 1;
1691 hw_ep->tx_reinit = 1;
1692
1693 if (hw_ep->max_packet_sz_tx) {
1694 musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
1695 musb_driver_name, i,
1696 hw_ep->is_shared_fifo ? "shared" : "tx",
1697 hw_ep->tx_double_buffered
1698 ? "doublebuffer, " : "",
1699 hw_ep->max_packet_sz_tx);
1700 }
1701 if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
1702 musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
1703 musb_driver_name, i,
1704 "rx",
1705 hw_ep->rx_double_buffered
1706 ? "doublebuffer, " : "",
1707 hw_ep->max_packet_sz_rx);
1708 }
1709 if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
1710 musb_dbg(musb, "hw_ep %d not configured", i);
1711 }
1712
1713 return 0;
1714 }
1715
1716 /*-------------------------------------------------------------------------*/
1717
1718 /*
1719 * handle all the irqs defined by the HDRC core. for now we expect: other
1720 * irq sources (phy, dma, etc) will be handled first, musb->int_* values
1721 * will be assigned, and the irq will already have been acked.
1722 *
1723 * called in irq context with spinlock held, irqs blocked
1724 */
musb_interrupt(struct musb * musb)1725 irqreturn_t musb_interrupt(struct musb *musb)
1726 {
1727 irqreturn_t retval = IRQ_NONE;
1728 unsigned long status;
1729 unsigned long epnum;
1730 u8 devctl;
1731
1732 if (!musb->int_usb && !musb->int_tx && !musb->int_rx)
1733 return IRQ_NONE;
1734
1735 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1736
1737 trace_musb_isr(musb);
1738
1739 /**
1740 * According to Mentor Graphics' documentation, flowchart on page 98,
1741 * IRQ should be handled as follows:
1742 *
1743 * . Resume IRQ
1744 * . Session Request IRQ
1745 * . VBUS Error IRQ
1746 * . Suspend IRQ
1747 * . Connect IRQ
1748 * . Disconnect IRQ
1749 * . Reset/Babble IRQ
1750 * . SOF IRQ (we're not using this one)
1751 * . Endpoint 0 IRQ
1752 * . TX Endpoints
1753 * . RX Endpoints
1754 *
1755 * We will be following that flowchart in order to avoid any problems
1756 * that might arise with internal Finite State Machine.
1757 */
1758
1759 if (musb->int_usb)
1760 retval |= musb_stage0_irq(musb, musb->int_usb, devctl);
1761
1762 if (musb->int_tx & 1) {
1763 if (is_host_active(musb))
1764 retval |= musb_h_ep0_irq(musb);
1765 else
1766 retval |= musb_g_ep0_irq(musb);
1767
1768 /* we have just handled endpoint 0 IRQ, clear it */
1769 musb->int_tx &= ~BIT(0);
1770 }
1771
1772 status = musb->int_tx;
1773
1774 for_each_set_bit(epnum, &status, 16) {
1775 retval = IRQ_HANDLED;
1776 if (is_host_active(musb))
1777 musb_host_tx(musb, epnum);
1778 else
1779 musb_g_tx(musb, epnum);
1780 }
1781
1782 status = musb->int_rx;
1783
1784 for_each_set_bit(epnum, &status, 16) {
1785 retval = IRQ_HANDLED;
1786 if (is_host_active(musb))
1787 musb_host_rx(musb, epnum);
1788 else
1789 musb_g_rx(musb, epnum);
1790 }
1791
1792 return retval;
1793 }
1794 EXPORT_SYMBOL_GPL(musb_interrupt);
1795
1796 #ifndef CONFIG_MUSB_PIO_ONLY
1797 static bool use_dma = true;
1798
1799 /* "modprobe ... use_dma=0" etc */
1800 module_param(use_dma, bool, 0644);
1801 MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
1802
musb_dma_completion(struct musb * musb,u8 epnum,u8 transmit)1803 void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
1804 {
1805 /* called with controller lock already held */
1806
1807 if (!epnum) {
1808 if (!is_cppi_enabled(musb)) {
1809 /* endpoint 0 */
1810 if (is_host_active(musb))
1811 musb_h_ep0_irq(musb);
1812 else
1813 musb_g_ep0_irq(musb);
1814 }
1815 } else {
1816 /* endpoints 1..15 */
1817 if (transmit) {
1818 if (is_host_active(musb))
1819 musb_host_tx(musb, epnum);
1820 else
1821 musb_g_tx(musb, epnum);
1822 } else {
1823 /* receive */
1824 if (is_host_active(musb))
1825 musb_host_rx(musb, epnum);
1826 else
1827 musb_g_rx(musb, epnum);
1828 }
1829 }
1830 }
1831 EXPORT_SYMBOL_GPL(musb_dma_completion);
1832
1833 #else
1834 #define use_dma 0
1835 #endif
1836
1837 static int (*musb_phy_callback)(enum musb_vbus_id_status status);
1838
1839 /*
1840 * musb_mailbox - optional phy notifier function
1841 * @status phy state change
1842 *
1843 * Optionally gets called from the USB PHY. Note that the USB PHY must be
1844 * disabled at the point the phy_callback is registered or unregistered.
1845 */
musb_mailbox(enum musb_vbus_id_status status)1846 int musb_mailbox(enum musb_vbus_id_status status)
1847 {
1848 if (musb_phy_callback)
1849 return musb_phy_callback(status);
1850
1851 return -ENODEV;
1852 };
1853 EXPORT_SYMBOL_GPL(musb_mailbox);
1854
1855 /*-------------------------------------------------------------------------*/
1856
1857 static ssize_t
mode_show(struct device * dev,struct device_attribute * attr,char * buf)1858 mode_show(struct device *dev, struct device_attribute *attr, char *buf)
1859 {
1860 struct musb *musb = dev_to_musb(dev);
1861 unsigned long flags;
1862 int ret;
1863
1864 spin_lock_irqsave(&musb->lock, flags);
1865 ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state));
1866 spin_unlock_irqrestore(&musb->lock, flags);
1867
1868 return ret;
1869 }
1870
1871 static ssize_t
mode_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t n)1872 mode_store(struct device *dev, struct device_attribute *attr,
1873 const char *buf, size_t n)
1874 {
1875 struct musb *musb = dev_to_musb(dev);
1876 unsigned long flags;
1877 int status;
1878
1879 spin_lock_irqsave(&musb->lock, flags);
1880 if (sysfs_streq(buf, "host"))
1881 status = musb_platform_set_mode(musb, MUSB_HOST);
1882 else if (sysfs_streq(buf, "peripheral"))
1883 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
1884 else if (sysfs_streq(buf, "otg"))
1885 status = musb_platform_set_mode(musb, MUSB_OTG);
1886 else
1887 status = -EINVAL;
1888 spin_unlock_irqrestore(&musb->lock, flags);
1889
1890 return (status == 0) ? n : status;
1891 }
1892 static DEVICE_ATTR_RW(mode);
1893
1894 static ssize_t
vbus_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t n)1895 vbus_store(struct device *dev, struct device_attribute *attr,
1896 const char *buf, size_t n)
1897 {
1898 struct musb *musb = dev_to_musb(dev);
1899 unsigned long flags;
1900 unsigned long val;
1901
1902 if (sscanf(buf, "%lu", &val) < 1) {
1903 dev_err(dev, "Invalid VBUS timeout ms value\n");
1904 return -EINVAL;
1905 }
1906
1907 spin_lock_irqsave(&musb->lock, flags);
1908 /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
1909 musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
1910 if (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)
1911 musb->is_active = 0;
1912 musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
1913 spin_unlock_irqrestore(&musb->lock, flags);
1914
1915 return n;
1916 }
1917
1918 static ssize_t
vbus_show(struct device * dev,struct device_attribute * attr,char * buf)1919 vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
1920 {
1921 struct musb *musb = dev_to_musb(dev);
1922 unsigned long flags;
1923 unsigned long val;
1924 int vbus;
1925 u8 devctl;
1926
1927 pm_runtime_get_sync(dev);
1928 spin_lock_irqsave(&musb->lock, flags);
1929 val = musb->a_wait_bcon;
1930 vbus = musb_platform_get_vbus_status(musb);
1931 if (vbus < 0) {
1932 /* Use default MUSB method by means of DEVCTL register */
1933 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1934 if ((devctl & MUSB_DEVCTL_VBUS)
1935 == (3 << MUSB_DEVCTL_VBUS_SHIFT))
1936 vbus = 1;
1937 else
1938 vbus = 0;
1939 }
1940 spin_unlock_irqrestore(&musb->lock, flags);
1941 pm_runtime_put_sync(dev);
1942
1943 return sprintf(buf, "Vbus %s, timeout %lu msec\n",
1944 vbus ? "on" : "off", val);
1945 }
1946 static DEVICE_ATTR_RW(vbus);
1947
1948 /* Gadget drivers can't know that a host is connected so they might want
1949 * to start SRP, but users can. This allows userspace to trigger SRP.
1950 */
srp_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t n)1951 static ssize_t srp_store(struct device *dev, struct device_attribute *attr,
1952 const char *buf, size_t n)
1953 {
1954 struct musb *musb = dev_to_musb(dev);
1955 unsigned short srp;
1956
1957 if (sscanf(buf, "%hu", &srp) != 1
1958 || (srp != 1)) {
1959 dev_err(dev, "SRP: Value must be 1\n");
1960 return -EINVAL;
1961 }
1962
1963 if (srp == 1)
1964 musb_g_wakeup(musb);
1965
1966 return n;
1967 }
1968 static DEVICE_ATTR_WO(srp);
1969
1970 static struct attribute *musb_attrs[] = {
1971 &dev_attr_mode.attr,
1972 &dev_attr_vbus.attr,
1973 &dev_attr_srp.attr,
1974 NULL
1975 };
1976 ATTRIBUTE_GROUPS(musb);
1977
1978 #define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \
1979 (2 << MUSB_DEVCTL_VBUS_SHIFT) | \
1980 MUSB_DEVCTL_SESSION)
1981 #define MUSB_QUIRK_B_DISCONNECT_99 (MUSB_DEVCTL_BDEVICE | \
1982 (3 << MUSB_DEVCTL_VBUS_SHIFT) | \
1983 MUSB_DEVCTL_SESSION)
1984 #define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \
1985 MUSB_DEVCTL_SESSION)
1986
1987 /*
1988 * Check the musb devctl session bit to determine if we want to
1989 * allow PM runtime for the device. In general, we want to keep things
1990 * active when the session bit is set except after host disconnect.
1991 *
1992 * Only called from musb_irq_work. If this ever needs to get called
1993 * elsewhere, proper locking must be implemented for musb->session.
1994 */
musb_pm_runtime_check_session(struct musb * musb)1995 static void musb_pm_runtime_check_session(struct musb *musb)
1996 {
1997 u8 devctl, s;
1998 int error;
1999
2000 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2001
2002 /* Handle session status quirks first */
2003 s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV |
2004 MUSB_DEVCTL_HR;
2005 switch (devctl & ~s) {
2006 case MUSB_QUIRK_B_DISCONNECT_99:
2007 if (musb->quirk_retries && !musb->flush_irq_work) {
2008 musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n");
2009 schedule_delayed_work(&musb->irq_work,
2010 msecs_to_jiffies(1000));
2011 musb->quirk_retries--;
2012 }
2013 break;
2014 case MUSB_QUIRK_B_INVALID_VBUS_91:
2015 if (musb->quirk_retries && !musb->flush_irq_work) {
2016 musb_dbg(musb,
2017 "Poll devctl on invalid vbus, assume no session");
2018 schedule_delayed_work(&musb->irq_work,
2019 msecs_to_jiffies(1000));
2020 musb->quirk_retries--;
2021 return;
2022 }
2023 fallthrough;
2024 case MUSB_QUIRK_A_DISCONNECT_19:
2025 if (musb->quirk_retries && !musb->flush_irq_work) {
2026 musb_dbg(musb,
2027 "Poll devctl on possible host mode disconnect");
2028 schedule_delayed_work(&musb->irq_work,
2029 msecs_to_jiffies(1000));
2030 musb->quirk_retries--;
2031 return;
2032 }
2033 if (!musb->session)
2034 break;
2035 musb_dbg(musb, "Allow PM on possible host mode disconnect");
2036 pm_runtime_mark_last_busy(musb->controller);
2037 pm_runtime_put_autosuspend(musb->controller);
2038 musb->session = false;
2039 return;
2040 default:
2041 break;
2042 }
2043
2044 /* No need to do anything if session has not changed */
2045 s = devctl & MUSB_DEVCTL_SESSION;
2046 if (s == musb->session)
2047 return;
2048
2049 /* Block PM or allow PM? */
2050 if (s) {
2051 musb_dbg(musb, "Block PM on active session: %02x", devctl);
2052 error = pm_runtime_get_sync(musb->controller);
2053 if (error < 0)
2054 dev_err(musb->controller, "Could not enable: %i\n",
2055 error);
2056 musb->quirk_retries = 3;
2057 } else {
2058 musb_dbg(musb, "Allow PM with no session: %02x", devctl);
2059 pm_runtime_mark_last_busy(musb->controller);
2060 pm_runtime_put_autosuspend(musb->controller);
2061 }
2062
2063 musb->session = s;
2064 }
2065
2066 /* Only used to provide driver mode change events */
musb_irq_work(struct work_struct * data)2067 static void musb_irq_work(struct work_struct *data)
2068 {
2069 struct musb *musb = container_of(data, struct musb, irq_work.work);
2070 int error;
2071
2072 error = pm_runtime_resume_and_get(musb->controller);
2073 if (error < 0) {
2074 dev_err(musb->controller, "Could not enable: %i\n", error);
2075
2076 return;
2077 }
2078
2079 musb_pm_runtime_check_session(musb);
2080
2081 if (musb->xceiv->otg->state != musb->xceiv_old_state) {
2082 musb->xceiv_old_state = musb->xceiv->otg->state;
2083 sysfs_notify(&musb->controller->kobj, NULL, "mode");
2084 }
2085
2086 pm_runtime_mark_last_busy(musb->controller);
2087 pm_runtime_put_autosuspend(musb->controller);
2088 }
2089
musb_recover_from_babble(struct musb * musb)2090 static void musb_recover_from_babble(struct musb *musb)
2091 {
2092 int ret;
2093 u8 devctl;
2094
2095 musb_disable_interrupts(musb);
2096
2097 /*
2098 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
2099 * it some slack and wait for 10us.
2100 */
2101 udelay(10);
2102
2103 ret = musb_platform_recover(musb);
2104 if (ret) {
2105 musb_enable_interrupts(musb);
2106 return;
2107 }
2108
2109 /* drop session bit */
2110 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2111 devctl &= ~MUSB_DEVCTL_SESSION;
2112 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
2113
2114 /* tell usbcore about it */
2115 musb_root_disconnect(musb);
2116
2117 /*
2118 * When a babble condition occurs, the musb controller
2119 * removes the session bit and the endpoint config is lost.
2120 */
2121 if (musb->dyn_fifo)
2122 ret = ep_config_from_table(musb);
2123 else
2124 ret = ep_config_from_hw(musb);
2125
2126 /* restart session */
2127 if (ret == 0)
2128 musb_start(musb);
2129 }
2130
2131 /* --------------------------------------------------------------------------
2132 * Init support
2133 */
2134
allocate_instance(struct device * dev,const struct musb_hdrc_config * config,void __iomem * mbase)2135 static struct musb *allocate_instance(struct device *dev,
2136 const struct musb_hdrc_config *config, void __iomem *mbase)
2137 {
2138 struct musb *musb;
2139 struct musb_hw_ep *ep;
2140 int epnum;
2141 int ret;
2142
2143 musb = devm_kzalloc(dev, sizeof(*musb), GFP_KERNEL);
2144 if (!musb)
2145 return NULL;
2146
2147 INIT_LIST_HEAD(&musb->control);
2148 INIT_LIST_HEAD(&musb->in_bulk);
2149 INIT_LIST_HEAD(&musb->out_bulk);
2150 INIT_LIST_HEAD(&musb->pending_list);
2151
2152 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
2153 musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
2154 musb->mregs = mbase;
2155 musb->ctrl_base = mbase;
2156 musb->nIrq = -ENODEV;
2157 musb->config = config;
2158 BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
2159 for (epnum = 0, ep = musb->endpoints;
2160 epnum < musb->config->num_eps;
2161 epnum++, ep++) {
2162 ep->musb = musb;
2163 ep->epnum = epnum;
2164 }
2165
2166 musb->controller = dev;
2167
2168 ret = musb_host_alloc(musb);
2169 if (ret < 0)
2170 goto err_free;
2171
2172 dev_set_drvdata(dev, musb);
2173
2174 return musb;
2175
2176 err_free:
2177 return NULL;
2178 }
2179
musb_free(struct musb * musb)2180 static void musb_free(struct musb *musb)
2181 {
2182 /* this has multiple entry modes. it handles fault cleanup after
2183 * probe(), where things may be partially set up, as well as rmmod
2184 * cleanup after everything's been de-activated.
2185 */
2186
2187 if (musb->nIrq >= 0) {
2188 if (musb->irq_wake)
2189 disable_irq_wake(musb->nIrq);
2190 free_irq(musb->nIrq, musb);
2191 }
2192
2193 musb_host_free(musb);
2194 }
2195
2196 struct musb_pending_work {
2197 int (*callback)(struct musb *musb, void *data);
2198 void *data;
2199 struct list_head node;
2200 };
2201
2202 #ifdef CONFIG_PM
2203 /*
2204 * Called from musb_runtime_resume(), musb_resume(), and
2205 * musb_queue_resume_work(). Callers must take musb->lock.
2206 */
musb_run_resume_work(struct musb * musb)2207 static int musb_run_resume_work(struct musb *musb)
2208 {
2209 struct musb_pending_work *w, *_w;
2210 unsigned long flags;
2211 int error = 0;
2212
2213 spin_lock_irqsave(&musb->list_lock, flags);
2214 list_for_each_entry_safe(w, _w, &musb->pending_list, node) {
2215 if (w->callback) {
2216 error = w->callback(musb, w->data);
2217 if (error < 0) {
2218 dev_err(musb->controller,
2219 "resume callback %p failed: %i\n",
2220 w->callback, error);
2221 }
2222 }
2223 list_del(&w->node);
2224 devm_kfree(musb->controller, w);
2225 }
2226 spin_unlock_irqrestore(&musb->list_lock, flags);
2227
2228 return error;
2229 }
2230 #endif
2231
2232 /*
2233 * Called to run work if device is active or else queue the work to happen
2234 * on resume. Caller must take musb->lock and must hold an RPM reference.
2235 *
2236 * Note that we cowardly refuse queuing work after musb PM runtime
2237 * resume is done calling musb_run_resume_work() and return -EINPROGRESS
2238 * instead.
2239 */
musb_queue_resume_work(struct musb * musb,int (* callback)(struct musb * musb,void * data),void * data)2240 int musb_queue_resume_work(struct musb *musb,
2241 int (*callback)(struct musb *musb, void *data),
2242 void *data)
2243 {
2244 struct musb_pending_work *w;
2245 unsigned long flags;
2246 bool is_suspended;
2247 int error;
2248
2249 if (WARN_ON(!callback))
2250 return -EINVAL;
2251
2252 spin_lock_irqsave(&musb->list_lock, flags);
2253 is_suspended = musb->is_runtime_suspended;
2254
2255 if (is_suspended) {
2256 w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC);
2257 if (!w) {
2258 error = -ENOMEM;
2259 goto out_unlock;
2260 }
2261
2262 w->callback = callback;
2263 w->data = data;
2264
2265 list_add_tail(&w->node, &musb->pending_list);
2266 error = 0;
2267 }
2268
2269 out_unlock:
2270 spin_unlock_irqrestore(&musb->list_lock, flags);
2271
2272 if (!is_suspended)
2273 error = callback(musb, data);
2274
2275 return error;
2276 }
2277 EXPORT_SYMBOL_GPL(musb_queue_resume_work);
2278
musb_deassert_reset(struct work_struct * work)2279 static void musb_deassert_reset(struct work_struct *work)
2280 {
2281 struct musb *musb;
2282 unsigned long flags;
2283
2284 musb = container_of(work, struct musb, deassert_reset_work.work);
2285
2286 spin_lock_irqsave(&musb->lock, flags);
2287
2288 if (musb->port1_status & USB_PORT_STAT_RESET)
2289 musb_port_reset(musb, false);
2290
2291 spin_unlock_irqrestore(&musb->lock, flags);
2292 }
2293
2294 /*
2295 * Perform generic per-controller initialization.
2296 *
2297 * @dev: the controller (already clocked, etc)
2298 * @nIrq: IRQ number
2299 * @ctrl: virtual address of controller registers,
2300 * not yet corrected for platform-specific offsets
2301 */
2302 static int
musb_init_controller(struct device * dev,int nIrq,void __iomem * ctrl)2303 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
2304 {
2305 int status;
2306 struct musb *musb;
2307 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
2308
2309 /* The driver might handle more features than the board; OK.
2310 * Fail when the board needs a feature that's not enabled.
2311 */
2312 if (!plat) {
2313 dev_err(dev, "no platform_data?\n");
2314 status = -ENODEV;
2315 goto fail0;
2316 }
2317
2318 /* allocate */
2319 musb = allocate_instance(dev, plat->config, ctrl);
2320 if (!musb) {
2321 status = -ENOMEM;
2322 goto fail0;
2323 }
2324
2325 spin_lock_init(&musb->lock);
2326 spin_lock_init(&musb->list_lock);
2327 musb->board_set_power = plat->set_power;
2328 musb->min_power = plat->min_power;
2329 musb->ops = plat->platform_ops;
2330 musb->port_mode = plat->mode;
2331
2332 /*
2333 * Initialize the default IO functions. At least omap2430 needs
2334 * these early. We initialize the platform specific IO functions
2335 * later on.
2336 */
2337 musb_readb = musb_default_readb;
2338 musb_writeb = musb_default_writeb;
2339 musb_readw = musb_default_readw;
2340 musb_writew = musb_default_writew;
2341
2342 /* The musb_platform_init() call:
2343 * - adjusts musb->mregs
2344 * - sets the musb->isr
2345 * - may initialize an integrated transceiver
2346 * - initializes musb->xceiv, usually by otg_get_phy()
2347 * - stops powering VBUS
2348 *
2349 * There are various transceiver configurations.
2350 * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
2351 * external/discrete ones in various flavors (twl4030 family,
2352 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
2353 */
2354 status = musb_platform_init(musb);
2355 if (status < 0)
2356 goto fail1;
2357
2358 if (!musb->isr) {
2359 status = -ENODEV;
2360 goto fail2;
2361 }
2362
2363
2364 /* Most devices use indexed offset or flat offset */
2365 if (musb->ops->quirks & MUSB_INDEXED_EP) {
2366 musb->io.ep_offset = musb_indexed_ep_offset;
2367 musb->io.ep_select = musb_indexed_ep_select;
2368 } else {
2369 musb->io.ep_offset = musb_flat_ep_offset;
2370 musb->io.ep_select = musb_flat_ep_select;
2371 }
2372
2373 if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE)
2374 musb->g.quirk_avoids_skb_reserve = 1;
2375
2376 /* At least tusb6010 has its own offsets */
2377 if (musb->ops->ep_offset)
2378 musb->io.ep_offset = musb->ops->ep_offset;
2379 if (musb->ops->ep_select)
2380 musb->io.ep_select = musb->ops->ep_select;
2381
2382 if (musb->ops->fifo_mode)
2383 fifo_mode = musb->ops->fifo_mode;
2384 else
2385 fifo_mode = 4;
2386
2387 if (musb->ops->fifo_offset)
2388 musb->io.fifo_offset = musb->ops->fifo_offset;
2389 else
2390 musb->io.fifo_offset = musb_default_fifo_offset;
2391
2392 if (musb->ops->busctl_offset)
2393 musb->io.busctl_offset = musb->ops->busctl_offset;
2394 else
2395 musb->io.busctl_offset = musb_default_busctl_offset;
2396
2397 if (musb->ops->readb)
2398 musb_readb = musb->ops->readb;
2399 if (musb->ops->writeb)
2400 musb_writeb = musb->ops->writeb;
2401 if (musb->ops->clearb)
2402 musb_clearb = musb->ops->clearb;
2403 else
2404 musb_clearb = musb_readb;
2405
2406 if (musb->ops->readw)
2407 musb_readw = musb->ops->readw;
2408 if (musb->ops->writew)
2409 musb_writew = musb->ops->writew;
2410 if (musb->ops->clearw)
2411 musb_clearw = musb->ops->clearw;
2412 else
2413 musb_clearw = musb_readw;
2414
2415 #ifndef CONFIG_MUSB_PIO_ONLY
2416 if (!musb->ops->dma_init || !musb->ops->dma_exit) {
2417 dev_err(dev, "DMA controller not set\n");
2418 status = -ENODEV;
2419 goto fail2;
2420 }
2421 musb_dma_controller_create = musb->ops->dma_init;
2422 musb_dma_controller_destroy = musb->ops->dma_exit;
2423 #endif
2424
2425 if (musb->ops->read_fifo)
2426 musb->io.read_fifo = musb->ops->read_fifo;
2427 else
2428 musb->io.read_fifo = musb_default_read_fifo;
2429
2430 if (musb->ops->write_fifo)
2431 musb->io.write_fifo = musb->ops->write_fifo;
2432 else
2433 musb->io.write_fifo = musb_default_write_fifo;
2434
2435 if (musb->ops->get_toggle)
2436 musb->io.get_toggle = musb->ops->get_toggle;
2437 else
2438 musb->io.get_toggle = musb_default_get_toggle;
2439
2440 if (musb->ops->set_toggle)
2441 musb->io.set_toggle = musb->ops->set_toggle;
2442 else
2443 musb->io.set_toggle = musb_default_set_toggle;
2444
2445 if (!musb->xceiv->io_ops) {
2446 musb->xceiv->io_dev = musb->controller;
2447 musb->xceiv->io_priv = musb->mregs;
2448 musb->xceiv->io_ops = &musb_ulpi_access;
2449 }
2450
2451 if (musb->ops->phy_callback)
2452 musb_phy_callback = musb->ops->phy_callback;
2453
2454 /*
2455 * We need musb_read/write functions initialized for PM.
2456 * Note that at least 2430 glue needs autosuspend delay
2457 * somewhere above 300 ms for the hardware to idle properly
2458 * after disconnecting the cable in host mode. Let's use
2459 * 500 ms for some margin.
2460 */
2461 pm_runtime_use_autosuspend(musb->controller);
2462 pm_runtime_set_autosuspend_delay(musb->controller, 500);
2463 pm_runtime_enable(musb->controller);
2464 pm_runtime_get_sync(musb->controller);
2465
2466 status = usb_phy_init(musb->xceiv);
2467 if (status < 0)
2468 goto err_usb_phy_init;
2469
2470 if (use_dma && dev->dma_mask) {
2471 musb->dma_controller =
2472 musb_dma_controller_create(musb, musb->mregs);
2473 if (IS_ERR(musb->dma_controller)) {
2474 status = PTR_ERR(musb->dma_controller);
2475 goto fail2_5;
2476 }
2477 }
2478
2479 /* be sure interrupts are disabled before connecting ISR */
2480 musb_platform_disable(musb);
2481 musb_disable_interrupts(musb);
2482 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
2483
2484 /* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */
2485 musb_writeb(musb->mregs, MUSB_POWER, 0);
2486
2487 /* Init IRQ workqueue before request_irq */
2488 INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
2489 INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
2490 INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
2491
2492 /* setup musb parts of the core (especially endpoints) */
2493 status = musb_core_init(plat->config->multipoint
2494 ? MUSB_CONTROLLER_MHDRC
2495 : MUSB_CONTROLLER_HDRC, musb);
2496 if (status < 0)
2497 goto fail3;
2498
2499 timer_setup(&musb->otg_timer, musb_otg_timer_func, 0);
2500
2501 /* attach to the IRQ */
2502 if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) {
2503 dev_err(dev, "request_irq %d failed!\n", nIrq);
2504 status = -ENODEV;
2505 goto fail3;
2506 }
2507 musb->nIrq = nIrq;
2508 /* FIXME this handles wakeup irqs wrong */
2509 if (enable_irq_wake(nIrq) == 0) {
2510 musb->irq_wake = 1;
2511 device_init_wakeup(dev, 1);
2512 } else {
2513 musb->irq_wake = 0;
2514 }
2515
2516 /* program PHY to use external vBus if required */
2517 if (plat->extvbus) {
2518 u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
2519 busctl |= MUSB_ULPI_USE_EXTVBUS;
2520 musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
2521 }
2522
2523 MUSB_DEV_MODE(musb);
2524 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
2525
2526 switch (musb->port_mode) {
2527 case MUSB_HOST:
2528 status = musb_host_setup(musb, plat->power);
2529 if (status < 0)
2530 goto fail3;
2531 status = musb_platform_set_mode(musb, MUSB_HOST);
2532 break;
2533 case MUSB_PERIPHERAL:
2534 status = musb_gadget_setup(musb);
2535 if (status < 0)
2536 goto fail3;
2537 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
2538 break;
2539 case MUSB_OTG:
2540 status = musb_host_setup(musb, plat->power);
2541 if (status < 0)
2542 goto fail3;
2543 status = musb_gadget_setup(musb);
2544 if (status) {
2545 musb_host_cleanup(musb);
2546 goto fail3;
2547 }
2548 status = musb_platform_set_mode(musb, MUSB_OTG);
2549 break;
2550 default:
2551 dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
2552 break;
2553 }
2554
2555 if (status < 0)
2556 goto fail3;
2557
2558 musb_init_debugfs(musb);
2559
2560 musb->is_initialized = 1;
2561 pm_runtime_mark_last_busy(musb->controller);
2562 pm_runtime_put_autosuspend(musb->controller);
2563
2564 return 0;
2565
2566 fail3:
2567 cancel_delayed_work_sync(&musb->irq_work);
2568 cancel_delayed_work_sync(&musb->finish_resume_work);
2569 cancel_delayed_work_sync(&musb->deassert_reset_work);
2570 if (musb->dma_controller)
2571 musb_dma_controller_destroy(musb->dma_controller);
2572
2573 fail2_5:
2574 usb_phy_shutdown(musb->xceiv);
2575
2576 err_usb_phy_init:
2577 pm_runtime_dont_use_autosuspend(musb->controller);
2578 pm_runtime_put_sync(musb->controller);
2579 pm_runtime_disable(musb->controller);
2580
2581 fail2:
2582 if (musb->irq_wake)
2583 device_init_wakeup(dev, 0);
2584 musb_platform_exit(musb);
2585
2586 fail1:
2587 if (status != -EPROBE_DEFER)
2588 dev_err(musb->controller,
2589 "%s failed with status %d\n", __func__, status);
2590
2591 musb_free(musb);
2592
2593 fail0:
2594
2595 return status;
2596
2597 }
2598
2599 /*-------------------------------------------------------------------------*/
2600
2601 /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
2602 * bridge to a platform device; this driver then suffices.
2603 */
musb_probe(struct platform_device * pdev)2604 static int musb_probe(struct platform_device *pdev)
2605 {
2606 struct device *dev = &pdev->dev;
2607 int irq = platform_get_irq_byname(pdev, "mc");
2608 void __iomem *base;
2609
2610 if (irq <= 0)
2611 return -ENODEV;
2612
2613 base = devm_platform_ioremap_resource(pdev, 0);
2614 if (IS_ERR(base))
2615 return PTR_ERR(base);
2616
2617 return musb_init_controller(dev, irq, base);
2618 }
2619
musb_remove(struct platform_device * pdev)2620 static int musb_remove(struct platform_device *pdev)
2621 {
2622 struct device *dev = &pdev->dev;
2623 struct musb *musb = dev_to_musb(dev);
2624 unsigned long flags;
2625
2626 /* this gets called on rmmod.
2627 * - Host mode: host may still be active
2628 * - Peripheral mode: peripheral is deactivated (or never-activated)
2629 * - OTG mode: both roles are deactivated (or never-activated)
2630 */
2631 musb_exit_debugfs(musb);
2632
2633 cancel_delayed_work_sync(&musb->irq_work);
2634 cancel_delayed_work_sync(&musb->finish_resume_work);
2635 cancel_delayed_work_sync(&musb->deassert_reset_work);
2636 pm_runtime_get_sync(musb->controller);
2637 musb_host_cleanup(musb);
2638 musb_gadget_cleanup(musb);
2639
2640 musb_platform_disable(musb);
2641 spin_lock_irqsave(&musb->lock, flags);
2642 musb_disable_interrupts(musb);
2643 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
2644 spin_unlock_irqrestore(&musb->lock, flags);
2645 musb_platform_exit(musb);
2646
2647 pm_runtime_dont_use_autosuspend(musb->controller);
2648 pm_runtime_put_sync(musb->controller);
2649 pm_runtime_disable(musb->controller);
2650 musb_phy_callback = NULL;
2651 if (musb->dma_controller)
2652 musb_dma_controller_destroy(musb->dma_controller);
2653 usb_phy_shutdown(musb->xceiv);
2654 musb_free(musb);
2655 device_init_wakeup(dev, 0);
2656 return 0;
2657 }
2658
2659 #ifdef CONFIG_PM
2660
musb_save_context(struct musb * musb)2661 static void musb_save_context(struct musb *musb)
2662 {
2663 int i;
2664 void __iomem *musb_base = musb->mregs;
2665 void __iomem *epio;
2666
2667 musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
2668 musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
2669 musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL);
2670 musb->context.power = musb_readb(musb_base, MUSB_POWER);
2671 musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
2672 musb->context.index = musb_readb(musb_base, MUSB_INDEX);
2673 musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
2674
2675 for (i = 0; i < musb->config->num_eps; ++i) {
2676 struct musb_hw_ep *hw_ep;
2677
2678 hw_ep = &musb->endpoints[i];
2679 if (!hw_ep)
2680 continue;
2681
2682 epio = hw_ep->regs;
2683 if (!epio)
2684 continue;
2685
2686 musb_writeb(musb_base, MUSB_INDEX, i);
2687 musb->context.index_regs[i].txmaxp =
2688 musb_readw(epio, MUSB_TXMAXP);
2689 musb->context.index_regs[i].txcsr =
2690 musb_readw(epio, MUSB_TXCSR);
2691 musb->context.index_regs[i].rxmaxp =
2692 musb_readw(epio, MUSB_RXMAXP);
2693 musb->context.index_regs[i].rxcsr =
2694 musb_readw(epio, MUSB_RXCSR);
2695
2696 if (musb->dyn_fifo) {
2697 musb->context.index_regs[i].txfifoadd =
2698 musb_readw(musb_base, MUSB_TXFIFOADD);
2699 musb->context.index_regs[i].rxfifoadd =
2700 musb_readw(musb_base, MUSB_RXFIFOADD);
2701 musb->context.index_regs[i].txfifosz =
2702 musb_readb(musb_base, MUSB_TXFIFOSZ);
2703 musb->context.index_regs[i].rxfifosz =
2704 musb_readb(musb_base, MUSB_RXFIFOSZ);
2705 }
2706
2707 musb->context.index_regs[i].txtype =
2708 musb_readb(epio, MUSB_TXTYPE);
2709 musb->context.index_regs[i].txinterval =
2710 musb_readb(epio, MUSB_TXINTERVAL);
2711 musb->context.index_regs[i].rxtype =
2712 musb_readb(epio, MUSB_RXTYPE);
2713 musb->context.index_regs[i].rxinterval =
2714 musb_readb(epio, MUSB_RXINTERVAL);
2715
2716 musb->context.index_regs[i].txfunaddr =
2717 musb_read_txfunaddr(musb, i);
2718 musb->context.index_regs[i].txhubaddr =
2719 musb_read_txhubaddr(musb, i);
2720 musb->context.index_regs[i].txhubport =
2721 musb_read_txhubport(musb, i);
2722
2723 musb->context.index_regs[i].rxfunaddr =
2724 musb_read_rxfunaddr(musb, i);
2725 musb->context.index_regs[i].rxhubaddr =
2726 musb_read_rxhubaddr(musb, i);
2727 musb->context.index_regs[i].rxhubport =
2728 musb_read_rxhubport(musb, i);
2729 }
2730 }
2731
musb_restore_context(struct musb * musb)2732 static void musb_restore_context(struct musb *musb)
2733 {
2734 int i;
2735 void __iomem *musb_base = musb->mregs;
2736 void __iomem *epio;
2737 u8 power;
2738
2739 musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
2740 musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
2741 musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl);
2742
2743 /* Don't affect SUSPENDM/RESUME bits in POWER reg */
2744 power = musb_readb(musb_base, MUSB_POWER);
2745 power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME;
2746 musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME);
2747 power |= musb->context.power;
2748 musb_writeb(musb_base, MUSB_POWER, power);
2749
2750 musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
2751 musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
2752 musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
2753 if (musb->context.devctl & MUSB_DEVCTL_SESSION)
2754 musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
2755
2756 for (i = 0; i < musb->config->num_eps; ++i) {
2757 struct musb_hw_ep *hw_ep;
2758
2759 hw_ep = &musb->endpoints[i];
2760 if (!hw_ep)
2761 continue;
2762
2763 epio = hw_ep->regs;
2764 if (!epio)
2765 continue;
2766
2767 musb_writeb(musb_base, MUSB_INDEX, i);
2768 musb_writew(epio, MUSB_TXMAXP,
2769 musb->context.index_regs[i].txmaxp);
2770 musb_writew(epio, MUSB_TXCSR,
2771 musb->context.index_regs[i].txcsr);
2772 musb_writew(epio, MUSB_RXMAXP,
2773 musb->context.index_regs[i].rxmaxp);
2774 musb_writew(epio, MUSB_RXCSR,
2775 musb->context.index_regs[i].rxcsr);
2776
2777 if (musb->dyn_fifo) {
2778 musb_writeb(musb_base, MUSB_TXFIFOSZ,
2779 musb->context.index_regs[i].txfifosz);
2780 musb_writeb(musb_base, MUSB_RXFIFOSZ,
2781 musb->context.index_regs[i].rxfifosz);
2782 musb_writew(musb_base, MUSB_TXFIFOADD,
2783 musb->context.index_regs[i].txfifoadd);
2784 musb_writew(musb_base, MUSB_RXFIFOADD,
2785 musb->context.index_regs[i].rxfifoadd);
2786 }
2787
2788 musb_writeb(epio, MUSB_TXTYPE,
2789 musb->context.index_regs[i].txtype);
2790 musb_writeb(epio, MUSB_TXINTERVAL,
2791 musb->context.index_regs[i].txinterval);
2792 musb_writeb(epio, MUSB_RXTYPE,
2793 musb->context.index_regs[i].rxtype);
2794 musb_writeb(epio, MUSB_RXINTERVAL,
2795
2796 musb->context.index_regs[i].rxinterval);
2797 musb_write_txfunaddr(musb, i,
2798 musb->context.index_regs[i].txfunaddr);
2799 musb_write_txhubaddr(musb, i,
2800 musb->context.index_regs[i].txhubaddr);
2801 musb_write_txhubport(musb, i,
2802 musb->context.index_regs[i].txhubport);
2803
2804 musb_write_rxfunaddr(musb, i,
2805 musb->context.index_regs[i].rxfunaddr);
2806 musb_write_rxhubaddr(musb, i,
2807 musb->context.index_regs[i].rxhubaddr);
2808 musb_write_rxhubport(musb, i,
2809 musb->context.index_regs[i].rxhubport);
2810 }
2811 musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
2812 }
2813
musb_suspend(struct device * dev)2814 static int musb_suspend(struct device *dev)
2815 {
2816 struct musb *musb = dev_to_musb(dev);
2817 unsigned long flags;
2818 int ret;
2819
2820 ret = pm_runtime_get_sync(dev);
2821 if (ret < 0) {
2822 pm_runtime_put_noidle(dev);
2823 return ret;
2824 }
2825
2826 musb_platform_disable(musb);
2827 musb_disable_interrupts(musb);
2828
2829 musb->flush_irq_work = true;
2830 while (flush_delayed_work(&musb->irq_work))
2831 ;
2832 musb->flush_irq_work = false;
2833
2834 if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION))
2835 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
2836
2837 WARN_ON(!list_empty(&musb->pending_list));
2838
2839 spin_lock_irqsave(&musb->lock, flags);
2840
2841 if (is_peripheral_active(musb)) {
2842 /* FIXME force disconnect unless we know USB will wake
2843 * the system up quickly enough to respond ...
2844 */
2845 } else if (is_host_active(musb)) {
2846 /* we know all the children are suspended; sometimes
2847 * they will even be wakeup-enabled.
2848 */
2849 }
2850
2851 musb_save_context(musb);
2852
2853 spin_unlock_irqrestore(&musb->lock, flags);
2854 return 0;
2855 }
2856
musb_resume(struct device * dev)2857 static int musb_resume(struct device *dev)
2858 {
2859 struct musb *musb = dev_to_musb(dev);
2860 unsigned long flags;
2861 int error;
2862 u8 devctl;
2863 u8 mask;
2864
2865 /*
2866 * For static cmos like DaVinci, register values were preserved
2867 * unless for some reason the whole soc powered down or the USB
2868 * module got reset through the PSC (vs just being disabled).
2869 *
2870 * For the DSPS glue layer though, a full register restore has to
2871 * be done. As it shouldn't harm other platforms, we do it
2872 * unconditionally.
2873 */
2874
2875 musb_restore_context(musb);
2876
2877 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2878 mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV;
2879 if ((devctl & mask) != (musb->context.devctl & mask))
2880 musb->port1_status = 0;
2881
2882 musb_enable_interrupts(musb);
2883 musb_platform_enable(musb);
2884
2885 /* session might be disabled in suspend */
2886 if (musb->port_mode == MUSB_HOST &&
2887 !(musb->ops->quirks & MUSB_PRESERVE_SESSION)) {
2888 devctl |= MUSB_DEVCTL_SESSION;
2889 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
2890 }
2891
2892 spin_lock_irqsave(&musb->lock, flags);
2893 error = musb_run_resume_work(musb);
2894 if (error)
2895 dev_err(musb->controller, "resume work failed with %i\n",
2896 error);
2897 spin_unlock_irqrestore(&musb->lock, flags);
2898
2899 pm_runtime_mark_last_busy(dev);
2900 pm_runtime_put_autosuspend(dev);
2901
2902 return 0;
2903 }
2904
musb_runtime_suspend(struct device * dev)2905 static int musb_runtime_suspend(struct device *dev)
2906 {
2907 struct musb *musb = dev_to_musb(dev);
2908
2909 musb_save_context(musb);
2910 musb->is_runtime_suspended = 1;
2911
2912 return 0;
2913 }
2914
musb_runtime_resume(struct device * dev)2915 static int musb_runtime_resume(struct device *dev)
2916 {
2917 struct musb *musb = dev_to_musb(dev);
2918 unsigned long flags;
2919 int error;
2920
2921 /*
2922 * When pm_runtime_get_sync called for the first time in driver
2923 * init, some of the structure is still not initialized which is
2924 * used in restore function. But clock needs to be
2925 * enabled before any register access, so
2926 * pm_runtime_get_sync has to be called.
2927 * Also context restore without save does not make
2928 * any sense
2929 */
2930 if (!musb->is_initialized)
2931 return 0;
2932
2933 musb_restore_context(musb);
2934
2935 spin_lock_irqsave(&musb->lock, flags);
2936 error = musb_run_resume_work(musb);
2937 if (error)
2938 dev_err(musb->controller, "resume work failed with %i\n",
2939 error);
2940 musb->is_runtime_suspended = 0;
2941 spin_unlock_irqrestore(&musb->lock, flags);
2942
2943 return 0;
2944 }
2945
2946 static const struct dev_pm_ops musb_dev_pm_ops = {
2947 .suspend = musb_suspend,
2948 .resume = musb_resume,
2949 .runtime_suspend = musb_runtime_suspend,
2950 .runtime_resume = musb_runtime_resume,
2951 };
2952
2953 #define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
2954 #else
2955 #define MUSB_DEV_PM_OPS NULL
2956 #endif
2957
2958 static struct platform_driver musb_driver = {
2959 .driver = {
2960 .name = musb_driver_name,
2961 .bus = &platform_bus_type,
2962 .pm = MUSB_DEV_PM_OPS,
2963 .dev_groups = musb_groups,
2964 },
2965 .probe = musb_probe,
2966 .remove = musb_remove,
2967 };
2968
2969 module_platform_driver(musb_driver);
2970