1 /******************************************************************************
2 *
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
5 *
6 * GPL LICENSE SUMMARY
7 *
8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
11 * Copyright(c) 2018 - 2020 Intel Corporation
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of version 2 of the GNU General Public License as
15 * published by the Free Software Foundation.
16 *
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
21 *
22 * The full GNU General Public License is included in this distribution
23 * in the file called COPYING.
24 *
25 * Contact Information:
26 * Intel Linux Wireless <linuxwifi@intel.com>
27 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *
29 * BSD LICENSE
30 *
31 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
32 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
33 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
34 * Copyright(c) 2018 - 2020 Intel Corporation
35 * All rights reserved.
36 *
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
39 * are met:
40 *
41 * * Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * * Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in
45 * the documentation and/or other materials provided with the
46 * distribution.
47 * * Neither the name Intel Corporation nor the names of its
48 * contributors may be used to endorse or promote products derived
49 * from this software without specific prior written permission.
50 *
51 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
52 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
53 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
54 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
55 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
56 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
57 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
58 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
59 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
60 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
61 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62 *
63 *****************************************************************************/
64
65 #ifndef __sta_h__
66 #define __sta_h__
67
68 #include <linux/spinlock.h>
69 #include <net/mac80211.h>
70 #include <linux/wait.h>
71
72 #include "iwl-trans.h" /* for IWL_MAX_TID_COUNT */
73 #include "fw-api.h" /* IWL_MVM_STATION_COUNT_MAX */
74 #include "rs.h"
75
76 struct iwl_mvm;
77 struct iwl_mvm_vif;
78
79 /**
80 * DOC: DQA - Dynamic Queue Allocation -introduction
81 *
82 * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi
83 * driver to allow dynamic allocation of queues on-demand, rather than allocate
84 * them statically ahead of time. Ideally, we would like to allocate one queue
85 * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2
86 * even if it also needs to send traffic to a sleeping STA1, without being
87 * blocked by the sleeping station.
88 *
89 * Although the queues in DQA mode are dynamically allocated, there are still
90 * some queues that are statically allocated:
91 * TXQ #0 - command queue
92 * TXQ #1 - aux frames
93 * TXQ #2 - P2P device frames
94 * TXQ #3 - P2P GO/SoftAP GCAST/BCAST frames
95 * TXQ #4 - BSS DATA frames queue
96 * TXQ #5-8 - Non-QoS and MGMT frames queue pool
97 * TXQ #9 - P2P GO/SoftAP probe responses
98 * TXQ #10-31 - DATA frames queue pool
99 * The queues are dynamically taken from either the MGMT frames queue pool or
100 * the DATA frames one. See the %iwl_mvm_dqa_txq for more information on every
101 * queue.
102 *
103 * When a frame for a previously unseen RA/TID comes in, it needs to be deferred
104 * until a queue is allocated for it, and only then can be TXed. Therefore, it
105 * is placed into %iwl_mvm_tid_data.deferred_tx_frames, and a worker called
106 * %mvm->add_stream_wk later allocates the queues and TXes the deferred frames.
107 *
108 * For convenience, MGMT is considered as if it has TID=8, and go to the MGMT
109 * queues in the pool. If there is no longer a free MGMT queue to allocate, a
110 * queue will be allocated from the DATA pool instead. Since QoS NDPs can create
111 * a problem for aggregations, they too will use a MGMT queue.
112 *
113 * When adding a STA, a DATA queue is reserved for it so that it can TX from
114 * it. If no such free queue exists for reserving, the STA addition will fail.
115 *
116 * If the DATA queue pool gets exhausted, no new STA will be accepted, and if a
117 * new RA/TID comes in for an existing STA, one of the STA's queues will become
118 * shared and will serve more than the single TID (but always for the same RA!).
119 *
120 * When a RA/TID needs to become aggregated, no new queue is required to be
121 * allocated, only mark the queue as aggregated via the ADD_STA command. Note,
122 * however, that a shared queue cannot be aggregated, and only after the other
123 * TIDs become inactive and are removed - only then can the queue be
124 * reconfigured and become aggregated.
125 *
126 * When removing a station, its queues are returned to the pool for reuse. Here
127 * we also need to make sure that we are synced with the worker thread that TXes
128 * the deferred frames so we don't get into a situation where the queues are
129 * removed and then the worker puts deferred frames onto the released queues or
130 * tries to allocate new queues for a STA we don't need anymore.
131 */
132
133 /**
134 * DOC: station table - introduction
135 *
136 * The station table is a list of data structure that reprensent the stations.
137 * In STA/P2P client mode, the driver will hold one station for the AP/ GO.
138 * In GO/AP mode, the driver will have as many stations as associated clients.
139 * All these stations are reflected in the fw's station table. The driver
140 * keeps the fw's station table up to date with the ADD_STA command. Stations
141 * can be removed by the REMOVE_STA command.
142 *
143 * All the data related to a station is held in the structure %iwl_mvm_sta
144 * which is embed in the mac80211's %ieee80211_sta (in the drv_priv) area.
145 * This data includes the index of the station in the fw, per tid information
146 * (sequence numbers, Block-ack state machine, etc...). The stations are
147 * created and deleted by the %sta_state callback from %ieee80211_ops.
148 *
149 * The driver holds a map: %fw_id_to_mac_id that allows to fetch a
150 * %ieee80211_sta (and the %iwl_mvm_sta embedded into it) based on a fw
151 * station index. That way, the driver is able to get the tid related data in
152 * O(1) in time sensitive paths (Tx / Tx response / BA notification). These
153 * paths are triggered by the fw, and the driver needs to get a pointer to the
154 * %ieee80211 structure. This map helps to get that pointer quickly.
155 */
156
157 /**
158 * DOC: station table - locking
159 *
160 * As stated before, the station is created / deleted by mac80211's %sta_state
161 * callback from %ieee80211_ops which can sleep. The next paragraph explains
162 * the locking of a single stations, the next ones relates to the station
163 * table.
164 *
165 * The station holds the sequence number per tid. So this data needs to be
166 * accessed in the Tx path (which is softIRQ). It also holds the Block-Ack
167 * information (the state machine / and the logic that checks if the queues
168 * were drained), so it also needs to be accessible from the Tx response flow.
169 * In short, the station needs to be access from sleepable context as well as
170 * from tasklets, so the station itself needs a spinlock.
171 *
172 * The writers of %fw_id_to_mac_id map are serialized by the global mutex of
173 * the mvm op_mode. This is possible since %sta_state can sleep.
174 * The pointers in this map are RCU protected, hence we won't replace the
175 * station while we have Tx / Tx response / BA notification running.
176 *
177 * If a station is deleted while it still has packets in its A-MPDU queues,
178 * then the reclaim flow will notice that there is no station in the map for
179 * sta_id and it will dump the responses.
180 */
181
182 /**
183 * DOC: station table - internal stations
184 *
185 * The FW needs a few internal stations that are not reflected in
186 * mac80211, such as broadcast station in AP / GO mode, or AUX sta for
187 * scanning and P2P device (during the GO negotiation).
188 * For these kind of stations we have %iwl_mvm_int_sta struct which holds the
189 * data relevant for them from both %iwl_mvm_sta and %ieee80211_sta.
190 * Usually the data for these stations is static, so no locking is required,
191 * and no TID data as this is also not needed.
192 * One thing to note, is that these stations have an ID in the fw, but not
193 * in mac80211. In order to "reserve" them a sta_id in %fw_id_to_mac_id
194 * we fill ERR_PTR(EINVAL) in this mapping and all other dereferencing of
195 * pointers from this mapping need to check that the value is not error
196 * or NULL.
197 *
198 * Currently there is only one auxiliary station for scanning, initialized
199 * on init.
200 */
201
202 /**
203 * DOC: station table - AP Station in STA mode
204 *
205 * %iwl_mvm_vif includes the index of the AP station in the fw's STA table:
206 * %ap_sta_id. To get the point to the corresponding %ieee80211_sta,
207 * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove
208 * the AP station from the fw before setting the MAC context as unassociated.
209 * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is
210 * removed by mac80211, but the station won't be removed in the fw until the
211 * VIF is set as unassociated. Then, %ap_sta_id will be invalidated.
212 */
213
214 /**
215 * DOC: station table - Drain vs. Flush
216 *
217 * Flush means that all the frames in the SCD queue are dumped regardless the
218 * station to which they were sent. We do that when we disassociate and before
219 * we remove the STA of the AP. The flush can be done synchronously against the
220 * fw.
221 * Drain means that the fw will drop all the frames sent to a specific station.
222 * This is useful when a client (if we are IBSS / GO or AP) disassociates.
223 */
224
225 /**
226 * DOC: station table - fw restart
227 *
228 * When the fw asserts, or we have any other issue that requires to reset the
229 * driver, we require mac80211 to reconfigure the driver. Since the private
230 * data of the stations is embed in mac80211's %ieee80211_sta, that data will
231 * not be zeroed and needs to be reinitialized manually.
232 * %IWL_MVM_STATUS_IN_HW_RESTART is set during restart and that will hint us
233 * that we must not allocate a new sta_id but reuse the previous one. This
234 * means that the stations being re-added after the reset will have the same
235 * place in the fw as before the reset. We do need to zero the %fw_id_to_mac_id
236 * map, since the stations aren't in the fw any more. Internal stations that
237 * are not added by mac80211 will be re-added in the init flow that is called
238 * after the restart: mac80211 call's %iwl_mvm_mac_start which calls to
239 * %iwl_mvm_up.
240 */
241
242 /**
243 * DOC: AP mode - PS
244 *
245 * When a station is asleep, the fw will set it as "asleep". All frames on
246 * shared queues (i.e. non-aggregation queues) to that station will be dropped
247 * by the fw (%TX_STATUS_FAIL_DEST_PS failure code).
248 *
249 * AMPDUs are in a separate queue that is stopped by the fw. We just need to
250 * let mac80211 know when there are frames in these queues so that it can
251 * properly handle trigger frames.
252 *
253 * When a trigger frame is received, mac80211 tells the driver to send frames
254 * from the AMPDU queues or sends frames to non-aggregation queues itself,
255 * depending on which ACs are delivery-enabled and what TID has frames to
256 * transmit. Note that mac80211 has all the knowledge since all the non-agg
257 * frames are buffered / filtered, and the driver tells mac80211 about agg
258 * frames). The driver needs to tell the fw to let frames out even if the
259 * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count.
260 *
261 * When we receive a frame from that station with PM bit unset, the driver
262 * needs to let the fw know that this station isn't asleep any more. This is
263 * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signaling the
264 * station's wakeup.
265 *
266 * For a GO, the Service Period might be cut short due to an absence period
267 * of the GO. In this (and all other cases) the firmware notifies us with the
268 * EOSP_NOTIFICATION, and we notify mac80211 of that. Further frames that we
269 * already sent to the device will be rejected again.
270 *
271 * See also "AP support for powersaving clients" in mac80211.h.
272 */
273
274 /**
275 * enum iwl_mvm_agg_state
276 *
277 * The state machine of the BA agreement establishment / tear down.
278 * These states relate to a specific RA / TID.
279 *
280 * @IWL_AGG_OFF: aggregation is not used
281 * @IWL_AGG_QUEUED: aggregation start work has been queued
282 * @IWL_AGG_STARTING: aggregation are starting (between start and oper)
283 * @IWL_AGG_ON: aggregation session is up
284 * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the
285 * HW queue to be empty from packets for this RA /TID.
286 * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the
287 * HW queue to be empty from packets for this RA /TID.
288 */
289 enum iwl_mvm_agg_state {
290 IWL_AGG_OFF = 0,
291 IWL_AGG_QUEUED,
292 IWL_AGG_STARTING,
293 IWL_AGG_ON,
294 IWL_EMPTYING_HW_QUEUE_ADDBA,
295 IWL_EMPTYING_HW_QUEUE_DELBA,
296 };
297
298 /**
299 * struct iwl_mvm_tid_data - holds the states for each RA / TID
300 * @seq_number: the next WiFi sequence number to use
301 * @next_reclaimed: the WiFi sequence number of the next packet to be acked.
302 * This is basically (last acked packet++).
303 * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the
304 * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA).
305 * @lq_color: the color of the LQ command as it appears in tx response.
306 * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed.
307 * @state: state of the BA agreement establishment / tear down.
308 * @txq_id: Tx queue used by the BA session / DQA
309 * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or
310 * the first packet to be sent in legacy HW queue in Tx AGG stop flow.
311 * Basically when next_reclaimed reaches ssn, we can tell mac80211 that
312 * we are ready to finish the Tx AGG stop / start flow.
313 * @tx_time: medium time consumed by this A-MPDU
314 * @tpt_meas_start: time of the throughput measurements start, is reset every HZ
315 * @tx_count_last: number of frames transmitted during the last second
316 * @tx_count: counts the number of frames transmitted since the last reset of
317 * tpt_meas_start
318 */
319 struct iwl_mvm_tid_data {
320 u16 seq_number;
321 u16 next_reclaimed;
322 /* The rest is Tx AGG related */
323 u32 rate_n_flags;
324 u8 lq_color;
325 bool amsdu_in_ampdu_allowed;
326 enum iwl_mvm_agg_state state;
327 u16 txq_id;
328 u16 ssn;
329 u16 tx_time;
330 unsigned long tpt_meas_start;
331 u32 tx_count_last;
332 u32 tx_count;
333 };
334
335 struct iwl_mvm_key_pn {
336 struct rcu_head rcu_head;
337 struct {
338 u8 pn[IWL_MAX_TID_COUNT][IEEE80211_CCMP_PN_LEN];
339 } ____cacheline_aligned_in_smp q[];
340 };
341
342 struct iwl_mvm_delba_data {
343 u32 baid;
344 } __packed;
345
346 struct iwl_mvm_nssn_sync_data {
347 u32 baid;
348 u32 nssn;
349 } __packed;
350
351 struct iwl_mvm_rss_sync_notif {
352 struct iwl_mvm_internal_rxq_notif metadata;
353 union {
354 struct iwl_mvm_delba_data delba;
355 struct iwl_mvm_nssn_sync_data nssn_sync;
356 };
357 } __packed;
358
359 /**
360 * struct iwl_mvm_rxq_dup_data - per station per rx queue data
361 * @last_seq: last sequence per tid for duplicate packet detection
362 * @last_sub_frame: last subframe packet
363 */
364 struct iwl_mvm_rxq_dup_data {
365 __le16 last_seq[IWL_MAX_TID_COUNT + 1];
366 u8 last_sub_frame[IWL_MAX_TID_COUNT + 1];
367 } ____cacheline_aligned_in_smp;
368
369 /**
370 * struct iwl_mvm_sta - representation of a station in the driver
371 * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
372 * @tfd_queue_msk: the tfd queues used by the station
373 * @mac_id_n_color: the MAC context this station is linked to
374 * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for
375 * tid.
376 * @max_agg_bufsize: the maximal size of the AGG buffer for this station
377 * @sta_type: station type
378 * @sta_state: station state according to enum %ieee80211_sta_state
379 * @bt_reduced_txpower: is reduced tx power enabled for this station
380 * @next_status_eosp: the next reclaimed packet is a PS-Poll response and
381 * we need to signal the EOSP
382 * @lock: lock to protect the whole struct. Since %tid_data is access from Tx
383 * and from Tx response flow, it needs a spinlock.
384 * @tid_data: per tid data + mgmt. Look at %iwl_mvm_tid_data.
385 * @tid_to_baid: a simple map of TID to baid
386 * @lq_sta: holds rate scaling data, either for the case when RS is done in
387 * the driver - %rs_drv or in the FW - %rs_fw.
388 * @reserved_queue: the queue reserved for this STA for DQA purposes
389 * Every STA has is given one reserved queue to allow it to operate. If no
390 * such queue can be guaranteed, the STA addition will fail.
391 * @tx_protection: reference counter for controlling the Tx protection.
392 * @tt_tx_protection: is thermal throttling enable Tx protection?
393 * @disable_tx: is tx to this STA disabled?
394 * @amsdu_enabled: bitmap of TX AMSDU allowed TIDs.
395 * In case TLC offload is not active it is either 0xFFFF or 0.
396 * @max_amsdu_len: max AMSDU length
397 * @orig_amsdu_len: used to save the original amsdu_len when it is changed via
398 * debugfs. If it's set to 0, it means that it is it's not set via
399 * debugfs.
400 * @agg_tids: bitmap of tids whose status is operational aggregated (IWL_AGG_ON)
401 * @sleep_tx_count: the number of frames that we told the firmware to let out
402 * even when that station is asleep. This is useful in case the queue
403 * gets empty before all the frames were sent, which can happen when
404 * we are sending frames from an AMPDU queue and there was a hole in
405 * the BA window. To be used for UAPSD only.
406 * @ptk_pn: per-queue PTK PN data structures
407 * @dup_data: per queue duplicate packet detection data
408 * @deferred_traffic_tid_map: indication bitmap of deferred traffic per-TID
409 * @tx_ant: the index of the antenna to use for data tx to this station. Only
410 * used during connection establishment (e.g. for the 4 way handshake
411 * exchange).
412 *
413 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
414 * in the structure for use by driver. This structure is placed in that
415 * space.
416 *
417 */
418 struct iwl_mvm_sta {
419 u32 sta_id;
420 u32 tfd_queue_msk;
421 u32 mac_id_n_color;
422 u16 tid_disable_agg;
423 u16 max_agg_bufsize;
424 enum iwl_sta_type sta_type;
425 enum ieee80211_sta_state sta_state;
426 bool bt_reduced_txpower;
427 bool next_status_eosp;
428 spinlock_t lock;
429 struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT + 1];
430 u8 tid_to_baid[IWL_MAX_TID_COUNT];
431 union {
432 struct iwl_lq_sta_rs_fw rs_fw;
433 struct iwl_lq_sta rs_drv;
434 } lq_sta;
435 struct ieee80211_vif *vif;
436 struct iwl_mvm_key_pn __rcu *ptk_pn[4];
437 struct iwl_mvm_rxq_dup_data *dup_data;
438
439 u8 reserved_queue;
440
441 /* Temporary, until the new TLC will control the Tx protection */
442 s8 tx_protection;
443 bool tt_tx_protection;
444
445 bool disable_tx;
446 u16 amsdu_enabled;
447 u16 max_amsdu_len;
448 u16 orig_amsdu_len;
449 bool sleeping;
450 u8 agg_tids;
451 u8 sleep_tx_count;
452 u8 avg_energy;
453 u8 tx_ant;
454 };
455
456 u16 iwl_mvm_tid_queued(struct iwl_mvm *mvm, struct iwl_mvm_tid_data *tid_data);
457
458 static inline struct iwl_mvm_sta *
iwl_mvm_sta_from_mac80211(struct ieee80211_sta * sta)459 iwl_mvm_sta_from_mac80211(struct ieee80211_sta *sta)
460 {
461 return (void *)sta->drv_priv;
462 }
463
464 /**
465 * struct iwl_mvm_int_sta - representation of an internal station (auxiliary or
466 * broadcast)
467 * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
468 * @type: station type
469 * @tfd_queue_msk: the tfd queues used by the station
470 */
471 struct iwl_mvm_int_sta {
472 u32 sta_id;
473 enum iwl_sta_type type;
474 u32 tfd_queue_msk;
475 };
476
477 /**
478 * Send the STA info to the FW.
479 *
480 * @mvm: the iwl_mvm* to use
481 * @sta: the STA
482 * @update: this is true if the FW is being updated about a STA it already knows
483 * about. Otherwise (if this is a new STA), this should be false.
484 * @flags: if update==true, this marks what is being changed via ORs of values
485 * from enum iwl_sta_modify_flag. Otherwise, this is ignored.
486 */
487 int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
488 bool update, unsigned int flags);
489 int iwl_mvm_add_sta(struct iwl_mvm *mvm,
490 struct ieee80211_vif *vif,
491 struct ieee80211_sta *sta);
492
iwl_mvm_update_sta(struct iwl_mvm * mvm,struct ieee80211_vif * vif,struct ieee80211_sta * sta)493 static inline int iwl_mvm_update_sta(struct iwl_mvm *mvm,
494 struct ieee80211_vif *vif,
495 struct ieee80211_sta *sta)
496 {
497 return iwl_mvm_sta_send_to_fw(mvm, sta, true, 0);
498 }
499
500 int iwl_mvm_wait_sta_queues_empty(struct iwl_mvm *mvm,
501 struct iwl_mvm_sta *mvm_sta);
502 int iwl_mvm_rm_sta(struct iwl_mvm *mvm,
503 struct ieee80211_vif *vif,
504 struct ieee80211_sta *sta);
505 int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm,
506 struct ieee80211_vif *vif,
507 u8 sta_id);
508 int iwl_mvm_set_sta_key(struct iwl_mvm *mvm,
509 struct ieee80211_vif *vif,
510 struct ieee80211_sta *sta,
511 struct ieee80211_key_conf *keyconf,
512 u8 key_offset);
513 int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm,
514 struct ieee80211_vif *vif,
515 struct ieee80211_sta *sta,
516 struct ieee80211_key_conf *keyconf);
517
518 void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm,
519 struct ieee80211_vif *vif,
520 struct ieee80211_key_conf *keyconf,
521 struct ieee80211_sta *sta, u32 iv32,
522 u16 *phase1key);
523
524 void iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm,
525 struct iwl_rx_cmd_buffer *rxb);
526
527 /* AMPDU */
528 int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
529 int tid, u16 ssn, bool start, u16 buf_size, u16 timeout);
530 int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
531 struct ieee80211_sta *sta, u16 tid, u16 *ssn);
532 int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
533 struct ieee80211_sta *sta, u16 tid, u16 buf_size,
534 bool amsdu);
535 int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
536 struct ieee80211_sta *sta, u16 tid);
537 int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
538 struct ieee80211_sta *sta, u16 tid);
539
540 int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
541 int tid, u8 queue, bool start);
542
543 int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm, u32 lmac_id);
544 int iwl_mvm_rm_aux_sta(struct iwl_mvm *mvm);
545
546 int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
547 int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
548 int iwl_mvm_add_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
549 int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
550 int iwl_mvm_rm_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
551 int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
552 int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
553 int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm,
554 struct iwl_mvm_int_sta *sta,
555 u32 qmask, enum nl80211_iftype iftype,
556 enum iwl_sta_type type);
557 void iwl_mvm_dealloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
558 void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta);
559 int iwl_mvm_add_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
560 int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
561 void iwl_mvm_dealloc_snif_sta(struct iwl_mvm *mvm);
562
563 void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm,
564 struct ieee80211_sta *sta);
565 void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm,
566 struct ieee80211_sta *sta,
567 enum ieee80211_frame_release_type reason,
568 u16 cnt, u16 tids, bool more_data,
569 bool single_sta_queue);
570 int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
571 bool drain);
572 void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm,
573 struct iwl_mvm_sta *mvmsta, bool disable);
574 void iwl_mvm_sta_modify_disable_tx_ap(struct iwl_mvm *mvm,
575 struct ieee80211_sta *sta,
576 bool disable);
577 void iwl_mvm_modify_all_sta_disable_tx(struct iwl_mvm *mvm,
578 struct iwl_mvm_vif *mvmvif,
579 bool disable);
580 void iwl_mvm_csa_client_absent(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
581 void iwl_mvm_add_new_dqa_stream_wk(struct work_struct *wk);
582 int iwl_mvm_add_pasn_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
583 struct iwl_mvm_int_sta *sta, u8 *addr, u32 cipher,
584 u8 *key, u32 key_len);
585 #endif /* __sta_h__ */
586