1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device driver for the PMU in Apple PowerBooks and PowerMacs.
4 *
5 * The VIA (versatile interface adapter) interfaces to the PMU,
6 * a 6805 microprocessor core whose primary function is to control
7 * battery charging and system power on the PowerBook 3400 and 2400.
8 * The PMU also controls the ADB (Apple Desktop Bus) which connects
9 * to the keyboard and mouse, as well as the non-volatile RAM
10 * and the RTC (real time clock) chip.
11 *
12 * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
13 * Copyright (C) 2001-2002 Benjamin Herrenschmidt
14 * Copyright (C) 2006-2007 Johannes Berg
15 *
16 * THIS DRIVER IS BECOMING A TOTAL MESS !
17 * - Cleanup atomically disabling reply to PMU events after
18 * a sleep or a freq. switch
19 *
20 */
21 #include <stdarg.h>
22 #include <linux/mutex.h>
23 #include <linux/types.h>
24 #include <linux/errno.h>
25 #include <linux/kernel.h>
26 #include <linux/delay.h>
27 #include <linux/sched/signal.h>
28 #include <linux/miscdevice.h>
29 #include <linux/blkdev.h>
30 #include <linux/pci.h>
31 #include <linux/slab.h>
32 #include <linux/poll.h>
33 #include <linux/adb.h>
34 #include <linux/pmu.h>
35 #include <linux/cuda.h>
36 #include <linux/module.h>
37 #include <linux/spinlock.h>
38 #include <linux/pm.h>
39 #include <linux/proc_fs.h>
40 #include <linux/seq_file.h>
41 #include <linux/init.h>
42 #include <linux/interrupt.h>
43 #include <linux/device.h>
44 #include <linux/syscore_ops.h>
45 #include <linux/freezer.h>
46 #include <linux/syscalls.h>
47 #include <linux/suspend.h>
48 #include <linux/cpu.h>
49 #include <linux/compat.h>
50 #include <linux/of_address.h>
51 #include <linux/of_irq.h>
52 #include <linux/uaccess.h>
53 #include <linux/pgtable.h>
54 #include <asm/machdep.h>
55 #include <asm/io.h>
56 #include <asm/sections.h>
57 #include <asm/irq.h>
58 #ifdef CONFIG_PPC_PMAC
59 #include <asm/pmac_feature.h>
60 #include <asm/pmac_pfunc.h>
61 #include <asm/pmac_low_i2c.h>
62 #include <asm/prom.h>
63 #include <asm/mmu_context.h>
64 #include <asm/cputable.h>
65 #include <asm/time.h>
66 #include <asm/backlight.h>
67 #else
68 #include <asm/macintosh.h>
69 #include <asm/macints.h>
70 #include <asm/mac_via.h>
71 #endif
72
73 #include "via-pmu-event.h"
74
75 /* Some compile options */
76 #undef DEBUG_SLEEP
77
78 /* How many iterations between battery polls */
79 #define BATTERY_POLLING_COUNT 2
80
81 static DEFINE_MUTEX(pmu_info_proc_mutex);
82
83 /* VIA registers - spaced 0x200 bytes apart */
84 #define RS 0x200 /* skip between registers */
85 #define B 0 /* B-side data */
86 #define A RS /* A-side data */
87 #define DIRB (2*RS) /* B-side direction (1=output) */
88 #define DIRA (3*RS) /* A-side direction (1=output) */
89 #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
90 #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
91 #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
92 #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
93 #define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
94 #define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
95 #define SR (10*RS) /* Shift register */
96 #define ACR (11*RS) /* Auxiliary control register */
97 #define PCR (12*RS) /* Peripheral control register */
98 #define IFR (13*RS) /* Interrupt flag register */
99 #define IER (14*RS) /* Interrupt enable register */
100 #define ANH (15*RS) /* A-side data, no handshake */
101
102 /* Bits in B data register: both active low */
103 #ifdef CONFIG_PPC_PMAC
104 #define TACK 0x08 /* Transfer acknowledge (input) */
105 #define TREQ 0x10 /* Transfer request (output) */
106 #else
107 #define TACK 0x02
108 #define TREQ 0x04
109 #endif
110
111 /* Bits in ACR */
112 #define SR_CTRL 0x1c /* Shift register control bits */
113 #define SR_EXT 0x0c /* Shift on external clock */
114 #define SR_OUT 0x10 /* Shift out if 1 */
115
116 /* Bits in IFR and IER */
117 #define IER_SET 0x80 /* set bits in IER */
118 #define IER_CLR 0 /* clear bits in IER */
119 #define SR_INT 0x04 /* Shift register full/empty */
120 #define CB2_INT 0x08
121 #define CB1_INT 0x10 /* transition on CB1 input */
122
123 static volatile enum pmu_state {
124 uninitialized = 0,
125 idle,
126 sending,
127 intack,
128 reading,
129 reading_intr,
130 locked,
131 } pmu_state;
132
133 static volatile enum int_data_state {
134 int_data_empty,
135 int_data_fill,
136 int_data_ready,
137 int_data_flush
138 } int_data_state[2] = { int_data_empty, int_data_empty };
139
140 static struct adb_request *current_req;
141 static struct adb_request *last_req;
142 static struct adb_request *req_awaiting_reply;
143 static unsigned char interrupt_data[2][32];
144 static int interrupt_data_len[2];
145 static int int_data_last;
146 static unsigned char *reply_ptr;
147 static int data_index;
148 static int data_len;
149 static volatile int adb_int_pending;
150 static volatile int disable_poll;
151 static int pmu_kind = PMU_UNKNOWN;
152 static int pmu_fully_inited;
153 static int pmu_has_adb;
154 #ifdef CONFIG_PPC_PMAC
155 static volatile unsigned char __iomem *via1;
156 static volatile unsigned char __iomem *via2;
157 static struct device_node *vias;
158 static struct device_node *gpio_node;
159 #endif
160 static unsigned char __iomem *gpio_reg;
161 static int gpio_irq = 0;
162 static int gpio_irq_enabled = -1;
163 static volatile int pmu_suspended;
164 static spinlock_t pmu_lock;
165 static u8 pmu_intr_mask;
166 static int pmu_version;
167 static int drop_interrupts;
168 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
169 static int option_lid_wakeup = 1;
170 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
171 static unsigned long async_req_locks;
172
173 #define NUM_IRQ_STATS 13
174 static unsigned int pmu_irq_stats[NUM_IRQ_STATS];
175
176 static struct proc_dir_entry *proc_pmu_root;
177 static struct proc_dir_entry *proc_pmu_info;
178 static struct proc_dir_entry *proc_pmu_irqstats;
179 static struct proc_dir_entry *proc_pmu_options;
180 static int option_server_mode;
181
182 int pmu_battery_count;
183 int pmu_cur_battery;
184 unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT;
185 struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
186 static int query_batt_timer = BATTERY_POLLING_COUNT;
187 static struct adb_request batt_req;
188 static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
189
190 int __fake_sleep;
191 int asleep;
192
193 #ifdef CONFIG_ADB
194 static int adb_dev_map;
195 static int pmu_adb_flags;
196
197 static int pmu_probe(void);
198 static int pmu_init(void);
199 static int pmu_send_request(struct adb_request *req, int sync);
200 static int pmu_adb_autopoll(int devs);
201 static int pmu_adb_reset_bus(void);
202 #endif /* CONFIG_ADB */
203
204 static int init_pmu(void);
205 static void pmu_start(void);
206 static irqreturn_t via_pmu_interrupt(int irq, void *arg);
207 static irqreturn_t gpio1_interrupt(int irq, void *arg);
208 static int pmu_info_proc_show(struct seq_file *m, void *v);
209 static int pmu_irqstats_proc_show(struct seq_file *m, void *v);
210 static int pmu_battery_proc_show(struct seq_file *m, void *v);
211 static void pmu_pass_intr(unsigned char *data, int len);
212 static const struct proc_ops pmu_options_proc_ops;
213
214 #ifdef CONFIG_ADB
215 const struct adb_driver via_pmu_driver = {
216 .name = "PMU",
217 .probe = pmu_probe,
218 .init = pmu_init,
219 .send_request = pmu_send_request,
220 .autopoll = pmu_adb_autopoll,
221 .poll = pmu_poll_adb,
222 .reset_bus = pmu_adb_reset_bus,
223 };
224 #endif /* CONFIG_ADB */
225
226 extern void low_sleep_handler(void);
227 extern void enable_kernel_altivec(void);
228 extern void enable_kernel_fp(void);
229
230 #ifdef DEBUG_SLEEP
231 int pmu_polled_request(struct adb_request *req);
232 void pmu_blink(int n);
233 #endif
234
235 /*
236 * This table indicates for each PMU opcode:
237 * - the number of data bytes to be sent with the command, or -1
238 * if a length byte should be sent,
239 * - the number of response bytes which the PMU will return, or
240 * -1 if it will send a length byte.
241 */
242 static const s8 pmu_data_len[256][2] = {
243 /* 0 1 2 3 4 5 6 7 */
244 /*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
245 /*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
246 /*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
247 /*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
248 /*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
249 /*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
250 /*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
251 /*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
252 /*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
253 /*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
254 /*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
255 /*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
256 /*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
257 /*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
258 /*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
259 /*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
260 /*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
261 /*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
262 /*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
263 /*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
264 /*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
265 /*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
266 /*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
267 /*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
268 /*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
269 /*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
270 /*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
271 /*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
272 /*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
273 /*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
274 /*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
275 /*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
276 };
277
278 static char *pbook_type[] = {
279 "Unknown PowerBook",
280 "PowerBook 2400/3400/3500(G3)",
281 "PowerBook G3 Series",
282 "1999 PowerBook G3",
283 "Core99"
284 };
285
find_via_pmu(void)286 int __init find_via_pmu(void)
287 {
288 #ifdef CONFIG_PPC_PMAC
289 u64 taddr;
290 const u32 *reg;
291
292 if (pmu_state != uninitialized)
293 return 1;
294 vias = of_find_node_by_name(NULL, "via-pmu");
295 if (vias == NULL)
296 return 0;
297
298 reg = of_get_property(vias, "reg", NULL);
299 if (reg == NULL) {
300 printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
301 goto fail;
302 }
303 taddr = of_translate_address(vias, reg);
304 if (taddr == OF_BAD_ADDR) {
305 printk(KERN_ERR "via-pmu: Can't translate address !\n");
306 goto fail;
307 }
308
309 spin_lock_init(&pmu_lock);
310
311 pmu_has_adb = 1;
312
313 pmu_intr_mask = PMU_INT_PCEJECT |
314 PMU_INT_SNDBRT |
315 PMU_INT_ADB |
316 PMU_INT_TICK;
317
318 if (of_node_name_eq(vias->parent, "ohare") ||
319 of_device_is_compatible(vias->parent, "ohare"))
320 pmu_kind = PMU_OHARE_BASED;
321 else if (of_device_is_compatible(vias->parent, "paddington"))
322 pmu_kind = PMU_PADDINGTON_BASED;
323 else if (of_device_is_compatible(vias->parent, "heathrow"))
324 pmu_kind = PMU_HEATHROW_BASED;
325 else if (of_device_is_compatible(vias->parent, "Keylargo")
326 || of_device_is_compatible(vias->parent, "K2-Keylargo")) {
327 struct device_node *gpiop;
328 struct device_node *adbp;
329 u64 gaddr = OF_BAD_ADDR;
330
331 pmu_kind = PMU_KEYLARGO_BASED;
332 adbp = of_find_node_by_type(NULL, "adb");
333 pmu_has_adb = (adbp != NULL);
334 of_node_put(adbp);
335 pmu_intr_mask = PMU_INT_PCEJECT |
336 PMU_INT_SNDBRT |
337 PMU_INT_ADB |
338 PMU_INT_TICK |
339 PMU_INT_ENVIRONMENT;
340
341 gpiop = of_find_node_by_name(NULL, "gpio");
342 if (gpiop) {
343 reg = of_get_property(gpiop, "reg", NULL);
344 if (reg)
345 gaddr = of_translate_address(gpiop, reg);
346 if (gaddr != OF_BAD_ADDR)
347 gpio_reg = ioremap(gaddr, 0x10);
348 of_node_put(gpiop);
349 }
350 if (gpio_reg == NULL) {
351 printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
352 goto fail;
353 }
354 } else
355 pmu_kind = PMU_UNKNOWN;
356
357 via1 = via2 = ioremap(taddr, 0x2000);
358 if (via1 == NULL) {
359 printk(KERN_ERR "via-pmu: Can't map address !\n");
360 goto fail_via_remap;
361 }
362
363 out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */
364 out_8(&via1[IFR], 0x7f); /* clear IFR */
365
366 pmu_state = idle;
367
368 if (!init_pmu())
369 goto fail_init;
370
371 sys_ctrler = SYS_CTRLER_PMU;
372
373 return 1;
374
375 fail_init:
376 iounmap(via1);
377 via1 = via2 = NULL;
378 fail_via_remap:
379 iounmap(gpio_reg);
380 gpio_reg = NULL;
381 fail:
382 of_node_put(vias);
383 vias = NULL;
384 pmu_state = uninitialized;
385 return 0;
386 #else
387 if (macintosh_config->adb_type != MAC_ADB_PB2)
388 return 0;
389
390 pmu_kind = PMU_UNKNOWN;
391
392 spin_lock_init(&pmu_lock);
393
394 pmu_has_adb = 1;
395
396 pmu_intr_mask = PMU_INT_PCEJECT |
397 PMU_INT_SNDBRT |
398 PMU_INT_ADB |
399 PMU_INT_TICK;
400
401 pmu_state = idle;
402
403 if (!init_pmu()) {
404 pmu_state = uninitialized;
405 return 0;
406 }
407
408 return 1;
409 #endif /* !CONFIG_PPC_PMAC */
410 }
411
412 #ifdef CONFIG_ADB
pmu_probe(void)413 static int pmu_probe(void)
414 {
415 return pmu_state == uninitialized ? -ENODEV : 0;
416 }
417
pmu_init(void)418 static int pmu_init(void)
419 {
420 return pmu_state == uninitialized ? -ENODEV : 0;
421 }
422 #endif /* CONFIG_ADB */
423
424 /*
425 * We can't wait until pmu_init gets called, that happens too late.
426 * It happens after IDE and SCSI initialization, which can take a few
427 * seconds, and by that time the PMU could have given up on us and
428 * turned us off.
429 * Thus this is called with arch_initcall rather than device_initcall.
430 */
via_pmu_start(void)431 static int __init via_pmu_start(void)
432 {
433 unsigned int __maybe_unused irq;
434
435 if (pmu_state == uninitialized)
436 return -ENODEV;
437
438 batt_req.complete = 1;
439
440 #ifdef CONFIG_PPC_PMAC
441 irq = irq_of_parse_and_map(vias, 0);
442 if (!irq) {
443 printk(KERN_ERR "via-pmu: can't map interrupt\n");
444 return -ENODEV;
445 }
446 /* We set IRQF_NO_SUSPEND because we don't want the interrupt
447 * to be disabled between the 2 passes of driver suspend, we
448 * control our own disabling for that one
449 */
450 if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND,
451 "VIA-PMU", (void *)0)) {
452 printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
453 return -ENODEV;
454 }
455
456 if (pmu_kind == PMU_KEYLARGO_BASED) {
457 gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
458 if (gpio_node == NULL)
459 gpio_node = of_find_node_by_name(NULL,
460 "pmu-interrupt");
461 if (gpio_node)
462 gpio_irq = irq_of_parse_and_map(gpio_node, 0);
463
464 if (gpio_irq) {
465 if (request_irq(gpio_irq, gpio1_interrupt,
466 IRQF_NO_SUSPEND, "GPIO1 ADB",
467 (void *)0))
468 printk(KERN_ERR "pmu: can't get irq %d"
469 " (GPIO1)\n", gpio_irq);
470 else
471 gpio_irq_enabled = 1;
472 }
473 }
474
475 /* Enable interrupts */
476 out_8(&via1[IER], IER_SET | SR_INT | CB1_INT);
477 #else
478 if (request_irq(IRQ_MAC_ADB_SR, via_pmu_interrupt, IRQF_NO_SUSPEND,
479 "VIA-PMU-SR", NULL)) {
480 pr_err("%s: couldn't get SR irq\n", __func__);
481 return -ENODEV;
482 }
483 if (request_irq(IRQ_MAC_ADB_CL, via_pmu_interrupt, IRQF_NO_SUSPEND,
484 "VIA-PMU-CL", NULL)) {
485 pr_err("%s: couldn't get CL irq\n", __func__);
486 free_irq(IRQ_MAC_ADB_SR, NULL);
487 return -ENODEV;
488 }
489 #endif /* !CONFIG_PPC_PMAC */
490
491 pmu_fully_inited = 1;
492
493 /* Make sure PMU settle down before continuing. This is _very_ important
494 * since the IDE probe may shut interrupts down for quite a bit of time. If
495 * a PMU communication is pending while this happens, the PMU may timeout
496 * Not that on Core99 machines, the PMU keeps sending us environement
497 * messages, we should find a way to either fix IDE or make it call
498 * pmu_suspend() before masking interrupts. This can also happens while
499 * scolling with some fbdevs.
500 */
501 do {
502 pmu_poll();
503 } while (pmu_state != idle);
504
505 return 0;
506 }
507
508 arch_initcall(via_pmu_start);
509
510 /*
511 * This has to be done after pci_init, which is a subsys_initcall.
512 */
via_pmu_dev_init(void)513 static int __init via_pmu_dev_init(void)
514 {
515 if (pmu_state == uninitialized)
516 return -ENODEV;
517
518 #ifdef CONFIG_PMAC_BACKLIGHT
519 /* Initialize backlight */
520 pmu_backlight_init();
521 #endif
522
523 #ifdef CONFIG_PPC32
524 if (of_machine_is_compatible("AAPL,3400/2400") ||
525 of_machine_is_compatible("AAPL,3500")) {
526 int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
527 NULL, PMAC_MB_INFO_MODEL, 0);
528 pmu_battery_count = 1;
529 if (mb == PMAC_TYPE_COMET)
530 pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
531 else
532 pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
533 } else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
534 of_machine_is_compatible("PowerBook1,1")) {
535 pmu_battery_count = 2;
536 pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
537 pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
538 } else {
539 struct device_node* prim =
540 of_find_node_by_name(NULL, "power-mgt");
541 const u32 *prim_info = NULL;
542 if (prim)
543 prim_info = of_get_property(prim, "prim-info", NULL);
544 if (prim_info) {
545 /* Other stuffs here yet unknown */
546 pmu_battery_count = (prim_info[6] >> 16) & 0xff;
547 pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
548 if (pmu_battery_count > 1)
549 pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
550 }
551 of_node_put(prim);
552 }
553 #endif /* CONFIG_PPC32 */
554
555 /* Create /proc/pmu */
556 proc_pmu_root = proc_mkdir("pmu", NULL);
557 if (proc_pmu_root) {
558 long i;
559
560 for (i=0; i<pmu_battery_count; i++) {
561 char title[16];
562 sprintf(title, "battery_%ld", i);
563 proc_pmu_batt[i] = proc_create_single_data(title, 0,
564 proc_pmu_root, pmu_battery_proc_show,
565 (void *)i);
566 }
567
568 proc_pmu_info = proc_create_single("info", 0, proc_pmu_root,
569 pmu_info_proc_show);
570 proc_pmu_irqstats = proc_create_single("interrupts", 0,
571 proc_pmu_root, pmu_irqstats_proc_show);
572 proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
573 &pmu_options_proc_ops);
574 }
575 return 0;
576 }
577
578 device_initcall(via_pmu_dev_init);
579
580 static int
init_pmu(void)581 init_pmu(void)
582 {
583 int timeout;
584 struct adb_request req;
585
586 /* Negate TREQ. Set TACK to input and TREQ to output. */
587 out_8(&via2[B], in_8(&via2[B]) | TREQ);
588 out_8(&via2[DIRB], (in_8(&via2[DIRB]) | TREQ) & ~TACK);
589
590 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
591 timeout = 100000;
592 while (!req.complete) {
593 if (--timeout < 0) {
594 printk(KERN_ERR "init_pmu: no response from PMU\n");
595 return 0;
596 }
597 udelay(10);
598 pmu_poll();
599 }
600
601 /* ack all pending interrupts */
602 timeout = 100000;
603 interrupt_data[0][0] = 1;
604 while (interrupt_data[0][0] || pmu_state != idle) {
605 if (--timeout < 0) {
606 printk(KERN_ERR "init_pmu: timed out acking intrs\n");
607 return 0;
608 }
609 if (pmu_state == idle)
610 adb_int_pending = 1;
611 via_pmu_interrupt(0, NULL);
612 udelay(10);
613 }
614
615 /* Tell PMU we are ready. */
616 if (pmu_kind == PMU_KEYLARGO_BASED) {
617 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
618 while (!req.complete)
619 pmu_poll();
620 }
621
622 /* Read PMU version */
623 pmu_request(&req, NULL, 1, PMU_GET_VERSION);
624 pmu_wait_complete(&req);
625 if (req.reply_len > 0)
626 pmu_version = req.reply[0];
627
628 /* Read server mode setting */
629 if (pmu_kind == PMU_KEYLARGO_BASED) {
630 pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
631 PMU_PWR_GET_POWERUP_EVENTS);
632 pmu_wait_complete(&req);
633 if (req.reply_len == 2) {
634 if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
635 option_server_mode = 1;
636 printk(KERN_INFO "via-pmu: Server Mode is %s\n",
637 option_server_mode ? "enabled" : "disabled");
638 }
639 }
640
641 printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
642 PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
643
644 return 1;
645 }
646
647 int
pmu_get_model(void)648 pmu_get_model(void)
649 {
650 return pmu_kind;
651 }
652
pmu_set_server_mode(int server_mode)653 static void pmu_set_server_mode(int server_mode)
654 {
655 struct adb_request req;
656
657 if (pmu_kind != PMU_KEYLARGO_BASED)
658 return;
659
660 option_server_mode = server_mode;
661 pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
662 pmu_wait_complete(&req);
663 if (req.reply_len < 2)
664 return;
665 if (server_mode)
666 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
667 PMU_PWR_SET_POWERUP_EVENTS,
668 req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
669 else
670 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
671 PMU_PWR_CLR_POWERUP_EVENTS,
672 req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
673 pmu_wait_complete(&req);
674 }
675
676 /* This new version of the code for 2400/3400/3500 powerbooks
677 * is inspired from the implementation in gkrellm-pmu
678 */
679 static void
done_battery_state_ohare(struct adb_request * req)680 done_battery_state_ohare(struct adb_request* req)
681 {
682 #ifdef CONFIG_PPC_PMAC
683 /* format:
684 * [0] : flags
685 * 0x01 : AC indicator
686 * 0x02 : charging
687 * 0x04 : battery exist
688 * 0x08 :
689 * 0x10 :
690 * 0x20 : full charged
691 * 0x40 : pcharge reset
692 * 0x80 : battery exist
693 *
694 * [1][2] : battery voltage
695 * [3] : CPU temperature
696 * [4] : battery temperature
697 * [5] : current
698 * [6][7] : pcharge
699 * --tkoba
700 */
701 unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
702 long pcharge, charge, vb, vmax, lmax;
703 long vmax_charging, vmax_charged;
704 long amperage, voltage, time, max;
705 int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
706 NULL, PMAC_MB_INFO_MODEL, 0);
707
708 if (req->reply[0] & 0x01)
709 pmu_power_flags |= PMU_PWR_AC_PRESENT;
710 else
711 pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
712
713 if (mb == PMAC_TYPE_COMET) {
714 vmax_charged = 189;
715 vmax_charging = 213;
716 lmax = 6500;
717 } else {
718 vmax_charged = 330;
719 vmax_charging = 330;
720 lmax = 6500;
721 }
722 vmax = vmax_charged;
723
724 /* If battery installed */
725 if (req->reply[0] & 0x04) {
726 bat_flags |= PMU_BATT_PRESENT;
727 if (req->reply[0] & 0x02)
728 bat_flags |= PMU_BATT_CHARGING;
729 vb = (req->reply[1] << 8) | req->reply[2];
730 voltage = (vb * 265 + 72665) / 10;
731 amperage = req->reply[5];
732 if ((req->reply[0] & 0x01) == 0) {
733 if (amperage > 200)
734 vb += ((amperage - 200) * 15)/100;
735 } else if (req->reply[0] & 0x02) {
736 vb = (vb * 97) / 100;
737 vmax = vmax_charging;
738 }
739 charge = (100 * vb) / vmax;
740 if (req->reply[0] & 0x40) {
741 pcharge = (req->reply[6] << 8) + req->reply[7];
742 if (pcharge > lmax)
743 pcharge = lmax;
744 pcharge *= 100;
745 pcharge = 100 - pcharge / lmax;
746 if (pcharge < charge)
747 charge = pcharge;
748 }
749 if (amperage > 0)
750 time = (charge * 16440) / amperage;
751 else
752 time = 0;
753 max = 100;
754 amperage = -amperage;
755 } else
756 charge = max = amperage = voltage = time = 0;
757
758 pmu_batteries[pmu_cur_battery].flags = bat_flags;
759 pmu_batteries[pmu_cur_battery].charge = charge;
760 pmu_batteries[pmu_cur_battery].max_charge = max;
761 pmu_batteries[pmu_cur_battery].amperage = amperage;
762 pmu_batteries[pmu_cur_battery].voltage = voltage;
763 pmu_batteries[pmu_cur_battery].time_remaining = time;
764 #endif /* CONFIG_PPC_PMAC */
765
766 clear_bit(0, &async_req_locks);
767 }
768
769 static void
done_battery_state_smart(struct adb_request * req)770 done_battery_state_smart(struct adb_request* req)
771 {
772 /* format:
773 * [0] : format of this structure (known: 3,4,5)
774 * [1] : flags
775 *
776 * format 3 & 4:
777 *
778 * [2] : charge
779 * [3] : max charge
780 * [4] : current
781 * [5] : voltage
782 *
783 * format 5:
784 *
785 * [2][3] : charge
786 * [4][5] : max charge
787 * [6][7] : current
788 * [8][9] : voltage
789 */
790
791 unsigned int bat_flags = PMU_BATT_TYPE_SMART;
792 int amperage;
793 unsigned int capa, max, voltage;
794
795 if (req->reply[1] & 0x01)
796 pmu_power_flags |= PMU_PWR_AC_PRESENT;
797 else
798 pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
799
800
801 capa = max = amperage = voltage = 0;
802
803 if (req->reply[1] & 0x04) {
804 bat_flags |= PMU_BATT_PRESENT;
805 switch(req->reply[0]) {
806 case 3:
807 case 4: capa = req->reply[2];
808 max = req->reply[3];
809 amperage = *((signed char *)&req->reply[4]);
810 voltage = req->reply[5];
811 break;
812 case 5: capa = (req->reply[2] << 8) | req->reply[3];
813 max = (req->reply[4] << 8) | req->reply[5];
814 amperage = *((signed short *)&req->reply[6]);
815 voltage = (req->reply[8] << 8) | req->reply[9];
816 break;
817 default:
818 pr_warn("pmu.c: unrecognized battery info, "
819 "len: %d, %4ph\n", req->reply_len,
820 req->reply);
821 break;
822 }
823 }
824
825 if ((req->reply[1] & 0x01) && (amperage > 0))
826 bat_flags |= PMU_BATT_CHARGING;
827
828 pmu_batteries[pmu_cur_battery].flags = bat_flags;
829 pmu_batteries[pmu_cur_battery].charge = capa;
830 pmu_batteries[pmu_cur_battery].max_charge = max;
831 pmu_batteries[pmu_cur_battery].amperage = amperage;
832 pmu_batteries[pmu_cur_battery].voltage = voltage;
833 if (amperage) {
834 if ((req->reply[1] & 0x01) && (amperage > 0))
835 pmu_batteries[pmu_cur_battery].time_remaining
836 = ((max-capa) * 3600) / amperage;
837 else
838 pmu_batteries[pmu_cur_battery].time_remaining
839 = (capa * 3600) / (-amperage);
840 } else
841 pmu_batteries[pmu_cur_battery].time_remaining = 0;
842
843 pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
844
845 clear_bit(0, &async_req_locks);
846 }
847
848 static void
query_battery_state(void)849 query_battery_state(void)
850 {
851 if (test_and_set_bit(0, &async_req_locks))
852 return;
853 if (pmu_kind == PMU_OHARE_BASED)
854 pmu_request(&batt_req, done_battery_state_ohare,
855 1, PMU_BATTERY_STATE);
856 else
857 pmu_request(&batt_req, done_battery_state_smart,
858 2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
859 }
860
pmu_info_proc_show(struct seq_file * m,void * v)861 static int pmu_info_proc_show(struct seq_file *m, void *v)
862 {
863 seq_printf(m, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
864 seq_printf(m, "PMU firmware version : %02x\n", pmu_version);
865 seq_printf(m, "AC Power : %d\n",
866 ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
867 seq_printf(m, "Battery count : %d\n", pmu_battery_count);
868
869 return 0;
870 }
871
pmu_irqstats_proc_show(struct seq_file * m,void * v)872 static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
873 {
874 int i;
875 static const char *irq_names[NUM_IRQ_STATS] = {
876 "Unknown interrupt (type 0)",
877 "Unknown interrupt (type 1)",
878 "PC-Card eject button",
879 "Sound/Brightness button",
880 "ADB message",
881 "Battery state change",
882 "Environment interrupt",
883 "Tick timer",
884 "Ghost interrupt (zero len)",
885 "Empty interrupt (empty mask)",
886 "Max irqs in a row",
887 "Total CB1 triggered events",
888 "Total GPIO1 triggered events",
889 };
890
891 for (i = 0; i < NUM_IRQ_STATS; i++) {
892 seq_printf(m, " %2u: %10u (%s)\n",
893 i, pmu_irq_stats[i], irq_names[i]);
894 }
895 return 0;
896 }
897
pmu_battery_proc_show(struct seq_file * m,void * v)898 static int pmu_battery_proc_show(struct seq_file *m, void *v)
899 {
900 long batnum = (long)m->private;
901
902 seq_putc(m, '\n');
903 seq_printf(m, "flags : %08x\n", pmu_batteries[batnum].flags);
904 seq_printf(m, "charge : %d\n", pmu_batteries[batnum].charge);
905 seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge);
906 seq_printf(m, "current : %d\n", pmu_batteries[batnum].amperage);
907 seq_printf(m, "voltage : %d\n", pmu_batteries[batnum].voltage);
908 seq_printf(m, "time rem. : %d\n", pmu_batteries[batnum].time_remaining);
909 return 0;
910 }
911
pmu_options_proc_show(struct seq_file * m,void * v)912 static int pmu_options_proc_show(struct seq_file *m, void *v)
913 {
914 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
915 if (pmu_kind == PMU_KEYLARGO_BASED &&
916 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
917 seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup);
918 #endif
919 if (pmu_kind == PMU_KEYLARGO_BASED)
920 seq_printf(m, "server_mode=%d\n", option_server_mode);
921
922 return 0;
923 }
924
pmu_options_proc_open(struct inode * inode,struct file * file)925 static int pmu_options_proc_open(struct inode *inode, struct file *file)
926 {
927 return single_open(file, pmu_options_proc_show, NULL);
928 }
929
pmu_options_proc_write(struct file * file,const char __user * buffer,size_t count,loff_t * pos)930 static ssize_t pmu_options_proc_write(struct file *file,
931 const char __user *buffer, size_t count, loff_t *pos)
932 {
933 char tmp[33];
934 char *label, *val;
935 size_t fcount = count;
936
937 if (!count)
938 return -EINVAL;
939 if (count > 32)
940 count = 32;
941 if (copy_from_user(tmp, buffer, count))
942 return -EFAULT;
943 tmp[count] = 0;
944
945 label = tmp;
946 while(*label == ' ')
947 label++;
948 val = label;
949 while(*val && (*val != '=')) {
950 if (*val == ' ')
951 *val = 0;
952 val++;
953 }
954 if ((*val) == 0)
955 return -EINVAL;
956 *(val++) = 0;
957 while(*val == ' ')
958 val++;
959 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
960 if (pmu_kind == PMU_KEYLARGO_BASED &&
961 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
962 if (!strcmp(label, "lid_wakeup"))
963 option_lid_wakeup = ((*val) == '1');
964 #endif
965 if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
966 int new_value;
967 new_value = ((*val) == '1');
968 if (new_value != option_server_mode)
969 pmu_set_server_mode(new_value);
970 }
971 return fcount;
972 }
973
974 static const struct proc_ops pmu_options_proc_ops = {
975 .proc_open = pmu_options_proc_open,
976 .proc_read = seq_read,
977 .proc_lseek = seq_lseek,
978 .proc_release = single_release,
979 .proc_write = pmu_options_proc_write,
980 };
981
982 #ifdef CONFIG_ADB
983 /* Send an ADB command */
pmu_send_request(struct adb_request * req,int sync)984 static int pmu_send_request(struct adb_request *req, int sync)
985 {
986 int i, ret;
987
988 if (pmu_state == uninitialized || !pmu_fully_inited) {
989 req->complete = 1;
990 return -ENXIO;
991 }
992
993 ret = -EINVAL;
994
995 switch (req->data[0]) {
996 case PMU_PACKET:
997 for (i = 0; i < req->nbytes - 1; ++i)
998 req->data[i] = req->data[i+1];
999 --req->nbytes;
1000 if (pmu_data_len[req->data[0]][1] != 0) {
1001 req->reply[0] = ADB_RET_OK;
1002 req->reply_len = 1;
1003 } else
1004 req->reply_len = 0;
1005 ret = pmu_queue_request(req);
1006 break;
1007 case CUDA_PACKET:
1008 switch (req->data[1]) {
1009 case CUDA_GET_TIME:
1010 if (req->nbytes != 2)
1011 break;
1012 req->data[0] = PMU_READ_RTC;
1013 req->nbytes = 1;
1014 req->reply_len = 3;
1015 req->reply[0] = CUDA_PACKET;
1016 req->reply[1] = 0;
1017 req->reply[2] = CUDA_GET_TIME;
1018 ret = pmu_queue_request(req);
1019 break;
1020 case CUDA_SET_TIME:
1021 if (req->nbytes != 6)
1022 break;
1023 req->data[0] = PMU_SET_RTC;
1024 req->nbytes = 5;
1025 for (i = 1; i <= 4; ++i)
1026 req->data[i] = req->data[i+1];
1027 req->reply_len = 3;
1028 req->reply[0] = CUDA_PACKET;
1029 req->reply[1] = 0;
1030 req->reply[2] = CUDA_SET_TIME;
1031 ret = pmu_queue_request(req);
1032 break;
1033 }
1034 break;
1035 case ADB_PACKET:
1036 if (!pmu_has_adb)
1037 return -ENXIO;
1038 for (i = req->nbytes - 1; i > 1; --i)
1039 req->data[i+2] = req->data[i];
1040 req->data[3] = req->nbytes - 2;
1041 req->data[2] = pmu_adb_flags;
1042 /*req->data[1] = req->data[1];*/
1043 req->data[0] = PMU_ADB_CMD;
1044 req->nbytes += 2;
1045 req->reply_expected = 1;
1046 req->reply_len = 0;
1047 ret = pmu_queue_request(req);
1048 break;
1049 }
1050 if (ret) {
1051 req->complete = 1;
1052 return ret;
1053 }
1054
1055 if (sync)
1056 while (!req->complete)
1057 pmu_poll();
1058
1059 return 0;
1060 }
1061
1062 /* Enable/disable autopolling */
__pmu_adb_autopoll(int devs)1063 static int __pmu_adb_autopoll(int devs)
1064 {
1065 struct adb_request req;
1066
1067 if (devs) {
1068 pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
1069 adb_dev_map >> 8, adb_dev_map);
1070 pmu_adb_flags = 2;
1071 } else {
1072 pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
1073 pmu_adb_flags = 0;
1074 }
1075 while (!req.complete)
1076 pmu_poll();
1077 return 0;
1078 }
1079
pmu_adb_autopoll(int devs)1080 static int pmu_adb_autopoll(int devs)
1081 {
1082 if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
1083 return -ENXIO;
1084
1085 adb_dev_map = devs;
1086 return __pmu_adb_autopoll(devs);
1087 }
1088
1089 /* Reset the ADB bus */
pmu_adb_reset_bus(void)1090 static int pmu_adb_reset_bus(void)
1091 {
1092 struct adb_request req;
1093 int save_autopoll = adb_dev_map;
1094
1095 if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
1096 return -ENXIO;
1097
1098 /* anyone got a better idea?? */
1099 __pmu_adb_autopoll(0);
1100
1101 req.nbytes = 4;
1102 req.done = NULL;
1103 req.data[0] = PMU_ADB_CMD;
1104 req.data[1] = ADB_BUSRESET;
1105 req.data[2] = 0;
1106 req.data[3] = 0;
1107 req.data[4] = 0;
1108 req.reply_len = 0;
1109 req.reply_expected = 1;
1110 if (pmu_queue_request(&req) != 0) {
1111 printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
1112 return -EIO;
1113 }
1114 pmu_wait_complete(&req);
1115
1116 if (save_autopoll != 0)
1117 __pmu_adb_autopoll(save_autopoll);
1118
1119 return 0;
1120 }
1121 #endif /* CONFIG_ADB */
1122
1123 /* Construct and send a pmu request */
1124 int
pmu_request(struct adb_request * req,void (* done)(struct adb_request *),int nbytes,...)1125 pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
1126 int nbytes, ...)
1127 {
1128 va_list list;
1129 int i;
1130
1131 if (pmu_state == uninitialized)
1132 return -ENXIO;
1133
1134 if (nbytes < 0 || nbytes > 32) {
1135 printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
1136 req->complete = 1;
1137 return -EINVAL;
1138 }
1139 req->nbytes = nbytes;
1140 req->done = done;
1141 va_start(list, nbytes);
1142 for (i = 0; i < nbytes; ++i)
1143 req->data[i] = va_arg(list, int);
1144 va_end(list);
1145 req->reply_len = 0;
1146 req->reply_expected = 0;
1147 return pmu_queue_request(req);
1148 }
1149
1150 int
pmu_queue_request(struct adb_request * req)1151 pmu_queue_request(struct adb_request *req)
1152 {
1153 unsigned long flags;
1154 int nsend;
1155
1156 if (pmu_state == uninitialized) {
1157 req->complete = 1;
1158 return -ENXIO;
1159 }
1160 if (req->nbytes <= 0) {
1161 req->complete = 1;
1162 return 0;
1163 }
1164 nsend = pmu_data_len[req->data[0]][0];
1165 if (nsend >= 0 && req->nbytes != nsend + 1) {
1166 req->complete = 1;
1167 return -EINVAL;
1168 }
1169
1170 req->next = NULL;
1171 req->sent = 0;
1172 req->complete = 0;
1173
1174 spin_lock_irqsave(&pmu_lock, flags);
1175 if (current_req) {
1176 last_req->next = req;
1177 last_req = req;
1178 } else {
1179 current_req = req;
1180 last_req = req;
1181 if (pmu_state == idle)
1182 pmu_start();
1183 }
1184 spin_unlock_irqrestore(&pmu_lock, flags);
1185
1186 return 0;
1187 }
1188
1189 static inline void
wait_for_ack(void)1190 wait_for_ack(void)
1191 {
1192 /* Sightly increased the delay, I had one occurrence of the message
1193 * reported
1194 */
1195 int timeout = 4000;
1196 while ((in_8(&via2[B]) & TACK) == 0) {
1197 if (--timeout < 0) {
1198 printk(KERN_ERR "PMU not responding (!ack)\n");
1199 return;
1200 }
1201 udelay(10);
1202 }
1203 }
1204
1205 /* New PMU seems to be very sensitive to those timings, so we make sure
1206 * PCI is flushed immediately */
1207 static inline void
send_byte(int x)1208 send_byte(int x)
1209 {
1210 out_8(&via1[ACR], in_8(&via1[ACR]) | SR_OUT | SR_EXT);
1211 out_8(&via1[SR], x);
1212 out_8(&via2[B], in_8(&via2[B]) & ~TREQ); /* assert TREQ */
1213 (void)in_8(&via2[B]);
1214 }
1215
1216 static inline void
recv_byte(void)1217 recv_byte(void)
1218 {
1219 out_8(&via1[ACR], (in_8(&via1[ACR]) & ~SR_OUT) | SR_EXT);
1220 in_8(&via1[SR]); /* resets SR */
1221 out_8(&via2[B], in_8(&via2[B]) & ~TREQ);
1222 (void)in_8(&via2[B]);
1223 }
1224
1225 static inline void
pmu_done(struct adb_request * req)1226 pmu_done(struct adb_request *req)
1227 {
1228 void (*done)(struct adb_request *) = req->done;
1229 mb();
1230 req->complete = 1;
1231 /* Here, we assume that if the request has a done member, the
1232 * struct request will survive to setting req->complete to 1
1233 */
1234 if (done)
1235 (*done)(req);
1236 }
1237
1238 static void
pmu_start(void)1239 pmu_start(void)
1240 {
1241 struct adb_request *req;
1242
1243 /* assert pmu_state == idle */
1244 /* get the packet to send */
1245 req = current_req;
1246 if (!req || pmu_state != idle
1247 || (/*req->reply_expected && */req_awaiting_reply))
1248 return;
1249
1250 pmu_state = sending;
1251 data_index = 1;
1252 data_len = pmu_data_len[req->data[0]][0];
1253
1254 /* Sounds safer to make sure ACK is high before writing. This helped
1255 * kill a problem with ADB and some iBooks
1256 */
1257 wait_for_ack();
1258 /* set the shift register to shift out and send a byte */
1259 send_byte(req->data[0]);
1260 }
1261
1262 void
pmu_poll(void)1263 pmu_poll(void)
1264 {
1265 if (pmu_state == uninitialized)
1266 return;
1267 if (disable_poll)
1268 return;
1269 via_pmu_interrupt(0, NULL);
1270 }
1271
1272 void
pmu_poll_adb(void)1273 pmu_poll_adb(void)
1274 {
1275 if (pmu_state == uninitialized)
1276 return;
1277 if (disable_poll)
1278 return;
1279 /* Kicks ADB read when PMU is suspended */
1280 adb_int_pending = 1;
1281 do {
1282 via_pmu_interrupt(0, NULL);
1283 } while (pmu_suspended && (adb_int_pending || pmu_state != idle
1284 || req_awaiting_reply));
1285 }
1286
1287 void
pmu_wait_complete(struct adb_request * req)1288 pmu_wait_complete(struct adb_request *req)
1289 {
1290 if (pmu_state == uninitialized)
1291 return;
1292 while((pmu_state != idle && pmu_state != locked) || !req->complete)
1293 via_pmu_interrupt(0, NULL);
1294 }
1295
1296 /* This function loops until the PMU is idle and prevents it from
1297 * anwsering to ADB interrupts. pmu_request can still be called.
1298 * This is done to avoid spurrious shutdowns when we know we'll have
1299 * interrupts switched off for a long time
1300 */
1301 void
pmu_suspend(void)1302 pmu_suspend(void)
1303 {
1304 unsigned long flags;
1305
1306 if (pmu_state == uninitialized)
1307 return;
1308
1309 spin_lock_irqsave(&pmu_lock, flags);
1310 pmu_suspended++;
1311 if (pmu_suspended > 1) {
1312 spin_unlock_irqrestore(&pmu_lock, flags);
1313 return;
1314 }
1315
1316 do {
1317 spin_unlock_irqrestore(&pmu_lock, flags);
1318 if (req_awaiting_reply)
1319 adb_int_pending = 1;
1320 via_pmu_interrupt(0, NULL);
1321 spin_lock_irqsave(&pmu_lock, flags);
1322 if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
1323 if (gpio_irq >= 0)
1324 disable_irq_nosync(gpio_irq);
1325 out_8(&via1[IER], CB1_INT | IER_CLR);
1326 spin_unlock_irqrestore(&pmu_lock, flags);
1327 break;
1328 }
1329 } while (1);
1330 }
1331
1332 void
pmu_resume(void)1333 pmu_resume(void)
1334 {
1335 unsigned long flags;
1336
1337 if (pmu_state == uninitialized || pmu_suspended < 1)
1338 return;
1339
1340 spin_lock_irqsave(&pmu_lock, flags);
1341 pmu_suspended--;
1342 if (pmu_suspended > 0) {
1343 spin_unlock_irqrestore(&pmu_lock, flags);
1344 return;
1345 }
1346 adb_int_pending = 1;
1347 if (gpio_irq >= 0)
1348 enable_irq(gpio_irq);
1349 out_8(&via1[IER], CB1_INT | IER_SET);
1350 spin_unlock_irqrestore(&pmu_lock, flags);
1351 pmu_poll();
1352 }
1353
1354 /* Interrupt data could be the result data from an ADB cmd */
1355 static void
pmu_handle_data(unsigned char * data,int len)1356 pmu_handle_data(unsigned char *data, int len)
1357 {
1358 unsigned char ints;
1359 int idx;
1360 int i = 0;
1361
1362 asleep = 0;
1363 if (drop_interrupts || len < 1) {
1364 adb_int_pending = 0;
1365 pmu_irq_stats[8]++;
1366 return;
1367 }
1368
1369 /* Get PMU interrupt mask */
1370 ints = data[0];
1371
1372 /* Record zero interrupts for stats */
1373 if (ints == 0)
1374 pmu_irq_stats[9]++;
1375
1376 /* Hack to deal with ADB autopoll flag */
1377 if (ints & PMU_INT_ADB)
1378 ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
1379
1380 next:
1381 if (ints == 0) {
1382 if (i > pmu_irq_stats[10])
1383 pmu_irq_stats[10] = i;
1384 return;
1385 }
1386 i++;
1387
1388 idx = ffs(ints) - 1;
1389 ints &= ~BIT(idx);
1390
1391 pmu_irq_stats[idx]++;
1392
1393 /* Note: for some reason, we get an interrupt with len=1,
1394 * data[0]==0 after each normal ADB interrupt, at least
1395 * on the Pismo. Still investigating... --BenH
1396 */
1397 switch (BIT(idx)) {
1398 case PMU_INT_ADB:
1399 if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
1400 struct adb_request *req = req_awaiting_reply;
1401 if (!req) {
1402 printk(KERN_ERR "PMU: extra ADB reply\n");
1403 return;
1404 }
1405 req_awaiting_reply = NULL;
1406 if (len <= 2)
1407 req->reply_len = 0;
1408 else {
1409 memcpy(req->reply, data + 1, len - 1);
1410 req->reply_len = len - 1;
1411 }
1412 pmu_done(req);
1413 } else {
1414 #ifdef CONFIG_XMON
1415 if (len == 4 && data[1] == 0x2c) {
1416 extern int xmon_wants_key, xmon_adb_keycode;
1417 if (xmon_wants_key) {
1418 xmon_adb_keycode = data[2];
1419 return;
1420 }
1421 }
1422 #endif /* CONFIG_XMON */
1423 #ifdef CONFIG_ADB
1424 /*
1425 * XXX On the [23]400 the PMU gives us an up
1426 * event for keycodes 0x74 or 0x75 when the PC
1427 * card eject buttons are released, so we
1428 * ignore those events.
1429 */
1430 if (!(pmu_kind == PMU_OHARE_BASED && len == 4
1431 && data[1] == 0x2c && data[3] == 0xff
1432 && (data[2] & ~1) == 0xf4))
1433 adb_input(data+1, len-1, 1);
1434 #endif /* CONFIG_ADB */
1435 }
1436 break;
1437
1438 /* Sound/brightness button pressed */
1439 case PMU_INT_SNDBRT:
1440 #ifdef CONFIG_PMAC_BACKLIGHT
1441 if (len == 3)
1442 pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
1443 #endif
1444 break;
1445
1446 /* Tick interrupt */
1447 case PMU_INT_TICK:
1448 /* Environment or tick interrupt, query batteries */
1449 if (pmu_battery_count) {
1450 if ((--query_batt_timer) == 0) {
1451 query_battery_state();
1452 query_batt_timer = BATTERY_POLLING_COUNT;
1453 }
1454 }
1455 break;
1456
1457 case PMU_INT_ENVIRONMENT:
1458 if (pmu_battery_count)
1459 query_battery_state();
1460 pmu_pass_intr(data, len);
1461 /* len == 6 is probably a bad check. But how do I
1462 * know what PMU versions send what events here? */
1463 if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) {
1464 via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
1465 via_pmu_event(PMU_EVT_LID, data[1]&1);
1466 }
1467 break;
1468
1469 default:
1470 pmu_pass_intr(data, len);
1471 }
1472 goto next;
1473 }
1474
1475 static struct adb_request*
pmu_sr_intr(void)1476 pmu_sr_intr(void)
1477 {
1478 struct adb_request *req;
1479 int bite = 0;
1480
1481 if (in_8(&via2[B]) & TREQ) {
1482 printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B]));
1483 return NULL;
1484 }
1485 /* The ack may not yet be low when we get the interrupt */
1486 while ((in_8(&via2[B]) & TACK) != 0)
1487 ;
1488
1489 /* if reading grab the byte, and reset the interrupt */
1490 if (pmu_state == reading || pmu_state == reading_intr)
1491 bite = in_8(&via1[SR]);
1492
1493 /* reset TREQ and wait for TACK to go high */
1494 out_8(&via2[B], in_8(&via2[B]) | TREQ);
1495 wait_for_ack();
1496
1497 switch (pmu_state) {
1498 case sending:
1499 req = current_req;
1500 if (data_len < 0) {
1501 data_len = req->nbytes - 1;
1502 send_byte(data_len);
1503 break;
1504 }
1505 if (data_index <= data_len) {
1506 send_byte(req->data[data_index++]);
1507 break;
1508 }
1509 req->sent = 1;
1510 data_len = pmu_data_len[req->data[0]][1];
1511 if (data_len == 0) {
1512 pmu_state = idle;
1513 current_req = req->next;
1514 if (req->reply_expected)
1515 req_awaiting_reply = req;
1516 else
1517 return req;
1518 } else {
1519 pmu_state = reading;
1520 data_index = 0;
1521 reply_ptr = req->reply + req->reply_len;
1522 recv_byte();
1523 }
1524 break;
1525
1526 case intack:
1527 data_index = 0;
1528 data_len = -1;
1529 pmu_state = reading_intr;
1530 reply_ptr = interrupt_data[int_data_last];
1531 recv_byte();
1532 if (gpio_irq >= 0 && !gpio_irq_enabled) {
1533 enable_irq(gpio_irq);
1534 gpio_irq_enabled = 1;
1535 }
1536 break;
1537
1538 case reading:
1539 case reading_intr:
1540 if (data_len == -1) {
1541 data_len = bite;
1542 if (bite > 32)
1543 printk(KERN_ERR "PMU: bad reply len %d\n", bite);
1544 } else if (data_index < 32) {
1545 reply_ptr[data_index++] = bite;
1546 }
1547 if (data_index < data_len) {
1548 recv_byte();
1549 break;
1550 }
1551
1552 if (pmu_state == reading_intr) {
1553 pmu_state = idle;
1554 int_data_state[int_data_last] = int_data_ready;
1555 interrupt_data_len[int_data_last] = data_len;
1556 } else {
1557 req = current_req;
1558 /*
1559 * For PMU sleep and freq change requests, we lock the
1560 * PMU until it's explicitly unlocked. This avoids any
1561 * spurrious event polling getting in
1562 */
1563 current_req = req->next;
1564 req->reply_len += data_index;
1565 if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
1566 pmu_state = locked;
1567 else
1568 pmu_state = idle;
1569 return req;
1570 }
1571 break;
1572
1573 default:
1574 printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
1575 pmu_state);
1576 }
1577 return NULL;
1578 }
1579
1580 static irqreturn_t
via_pmu_interrupt(int irq,void * arg)1581 via_pmu_interrupt(int irq, void *arg)
1582 {
1583 unsigned long flags;
1584 int intr;
1585 int nloop = 0;
1586 int int_data = -1;
1587 struct adb_request *req = NULL;
1588 int handled = 0;
1589
1590 /* This is a bit brutal, we can probably do better */
1591 spin_lock_irqsave(&pmu_lock, flags);
1592 ++disable_poll;
1593
1594 for (;;) {
1595 /* On 68k Macs, VIA interrupts are dispatched individually.
1596 * Unless we are polling, the relevant IRQ flag has already
1597 * been cleared.
1598 */
1599 intr = 0;
1600 if (IS_ENABLED(CONFIG_PPC_PMAC) || !irq) {
1601 intr = in_8(&via1[IFR]) & (SR_INT | CB1_INT);
1602 out_8(&via1[IFR], intr);
1603 }
1604 #ifndef CONFIG_PPC_PMAC
1605 switch (irq) {
1606 case IRQ_MAC_ADB_CL:
1607 intr = CB1_INT;
1608 break;
1609 case IRQ_MAC_ADB_SR:
1610 intr = SR_INT;
1611 break;
1612 }
1613 #endif
1614 if (intr == 0)
1615 break;
1616 handled = 1;
1617 if (++nloop > 1000) {
1618 printk(KERN_DEBUG "PMU: stuck in intr loop, "
1619 "intr=%x, ier=%x pmu_state=%d\n",
1620 intr, in_8(&via1[IER]), pmu_state);
1621 break;
1622 }
1623 if (intr & CB1_INT) {
1624 adb_int_pending = 1;
1625 pmu_irq_stats[11]++;
1626 }
1627 if (intr & SR_INT) {
1628 req = pmu_sr_intr();
1629 if (req)
1630 break;
1631 }
1632 #ifndef CONFIG_PPC_PMAC
1633 break;
1634 #endif
1635 }
1636
1637 recheck:
1638 if (pmu_state == idle) {
1639 if (adb_int_pending) {
1640 if (int_data_state[0] == int_data_empty)
1641 int_data_last = 0;
1642 else if (int_data_state[1] == int_data_empty)
1643 int_data_last = 1;
1644 else
1645 goto no_free_slot;
1646 pmu_state = intack;
1647 int_data_state[int_data_last] = int_data_fill;
1648 /* Sounds safer to make sure ACK is high before writing.
1649 * This helped kill a problem with ADB and some iBooks
1650 */
1651 wait_for_ack();
1652 send_byte(PMU_INT_ACK);
1653 adb_int_pending = 0;
1654 } else if (current_req)
1655 pmu_start();
1656 }
1657 no_free_slot:
1658 /* Mark the oldest buffer for flushing */
1659 if (int_data_state[!int_data_last] == int_data_ready) {
1660 int_data_state[!int_data_last] = int_data_flush;
1661 int_data = !int_data_last;
1662 } else if (int_data_state[int_data_last] == int_data_ready) {
1663 int_data_state[int_data_last] = int_data_flush;
1664 int_data = int_data_last;
1665 }
1666 --disable_poll;
1667 spin_unlock_irqrestore(&pmu_lock, flags);
1668
1669 /* Deal with completed PMU requests outside of the lock */
1670 if (req) {
1671 pmu_done(req);
1672 req = NULL;
1673 }
1674
1675 /* Deal with interrupt datas outside of the lock */
1676 if (int_data >= 0) {
1677 pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]);
1678 spin_lock_irqsave(&pmu_lock, flags);
1679 ++disable_poll;
1680 int_data_state[int_data] = int_data_empty;
1681 int_data = -1;
1682 goto recheck;
1683 }
1684
1685 return IRQ_RETVAL(handled);
1686 }
1687
1688 void
pmu_unlock(void)1689 pmu_unlock(void)
1690 {
1691 unsigned long flags;
1692
1693 spin_lock_irqsave(&pmu_lock, flags);
1694 if (pmu_state == locked)
1695 pmu_state = idle;
1696 adb_int_pending = 1;
1697 spin_unlock_irqrestore(&pmu_lock, flags);
1698 }
1699
1700
1701 static __maybe_unused irqreturn_t
gpio1_interrupt(int irq,void * arg)1702 gpio1_interrupt(int irq, void *arg)
1703 {
1704 unsigned long flags;
1705
1706 if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
1707 spin_lock_irqsave(&pmu_lock, flags);
1708 if (gpio_irq_enabled > 0) {
1709 disable_irq_nosync(gpio_irq);
1710 gpio_irq_enabled = 0;
1711 }
1712 pmu_irq_stats[12]++;
1713 adb_int_pending = 1;
1714 spin_unlock_irqrestore(&pmu_lock, flags);
1715 via_pmu_interrupt(0, NULL);
1716 return IRQ_HANDLED;
1717 }
1718 return IRQ_NONE;
1719 }
1720
1721 void
pmu_enable_irled(int on)1722 pmu_enable_irled(int on)
1723 {
1724 struct adb_request req;
1725
1726 if (pmu_state == uninitialized)
1727 return ;
1728 if (pmu_kind == PMU_KEYLARGO_BASED)
1729 return ;
1730
1731 pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
1732 (on ? PMU_POW_ON : PMU_POW_OFF));
1733 pmu_wait_complete(&req);
1734 }
1735
1736 /* Offset between Unix time (1970-based) and Mac time (1904-based) */
1737 #define RTC_OFFSET 2082844800
1738
pmu_get_time(void)1739 time64_t pmu_get_time(void)
1740 {
1741 struct adb_request req;
1742 u32 now;
1743
1744 if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
1745 return 0;
1746 pmu_wait_complete(&req);
1747 if (req.reply_len != 4)
1748 pr_err("%s: got %d byte reply\n", __func__, req.reply_len);
1749 now = (req.reply[0] << 24) + (req.reply[1] << 16) +
1750 (req.reply[2] << 8) + req.reply[3];
1751 return (time64_t)now - RTC_OFFSET;
1752 }
1753
pmu_set_rtc_time(struct rtc_time * tm)1754 int pmu_set_rtc_time(struct rtc_time *tm)
1755 {
1756 u32 now;
1757 struct adb_request req;
1758
1759 now = lower_32_bits(rtc_tm_to_time64(tm) + RTC_OFFSET);
1760 if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
1761 now >> 24, now >> 16, now >> 8, now) < 0)
1762 return -ENXIO;
1763 pmu_wait_complete(&req);
1764 if (req.reply_len != 0)
1765 pr_err("%s: got %d byte reply\n", __func__, req.reply_len);
1766 return 0;
1767 }
1768
1769 void
pmu_restart(void)1770 pmu_restart(void)
1771 {
1772 struct adb_request req;
1773
1774 if (pmu_state == uninitialized)
1775 return;
1776
1777 local_irq_disable();
1778
1779 drop_interrupts = 1;
1780
1781 if (pmu_kind != PMU_KEYLARGO_BASED) {
1782 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1783 PMU_INT_TICK );
1784 while(!req.complete)
1785 pmu_poll();
1786 }
1787
1788 pmu_request(&req, NULL, 1, PMU_RESET);
1789 pmu_wait_complete(&req);
1790 for (;;)
1791 ;
1792 }
1793
1794 void
pmu_shutdown(void)1795 pmu_shutdown(void)
1796 {
1797 struct adb_request req;
1798
1799 if (pmu_state == uninitialized)
1800 return;
1801
1802 local_irq_disable();
1803
1804 drop_interrupts = 1;
1805
1806 if (pmu_kind != PMU_KEYLARGO_BASED) {
1807 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1808 PMU_INT_TICK );
1809 pmu_wait_complete(&req);
1810 } else {
1811 /* Disable server mode on shutdown or we'll just
1812 * wake up again
1813 */
1814 pmu_set_server_mode(0);
1815 }
1816
1817 pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
1818 'M', 'A', 'T', 'T');
1819 pmu_wait_complete(&req);
1820 for (;;)
1821 ;
1822 }
1823
1824 int
pmu_present(void)1825 pmu_present(void)
1826 {
1827 return pmu_state != uninitialized;
1828 }
1829
1830 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
1831 /*
1832 * Put the powerbook to sleep.
1833 */
1834
1835 static u32 save_via[8];
1836
1837 static void
save_via_state(void)1838 save_via_state(void)
1839 {
1840 save_via[0] = in_8(&via1[ANH]);
1841 save_via[1] = in_8(&via1[DIRA]);
1842 save_via[2] = in_8(&via1[B]);
1843 save_via[3] = in_8(&via1[DIRB]);
1844 save_via[4] = in_8(&via1[PCR]);
1845 save_via[5] = in_8(&via1[ACR]);
1846 save_via[6] = in_8(&via1[T1CL]);
1847 save_via[7] = in_8(&via1[T1CH]);
1848 }
1849 static void
restore_via_state(void)1850 restore_via_state(void)
1851 {
1852 out_8(&via1[ANH], save_via[0]);
1853 out_8(&via1[DIRA], save_via[1]);
1854 out_8(&via1[B], save_via[2]);
1855 out_8(&via1[DIRB], save_via[3]);
1856 out_8(&via1[PCR], save_via[4]);
1857 out_8(&via1[ACR], save_via[5]);
1858 out_8(&via1[T1CL], save_via[6]);
1859 out_8(&via1[T1CH], save_via[7]);
1860 out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */
1861 out_8(&via1[IFR], 0x7f); /* clear IFR */
1862 out_8(&via1[IER], IER_SET | SR_INT | CB1_INT);
1863 }
1864
1865 #define GRACKLE_PM (1<<7)
1866 #define GRACKLE_DOZE (1<<5)
1867 #define GRACKLE_NAP (1<<4)
1868 #define GRACKLE_SLEEP (1<<3)
1869
powerbook_sleep_grackle(void)1870 static int powerbook_sleep_grackle(void)
1871 {
1872 unsigned long save_l2cr;
1873 unsigned short pmcr1;
1874 struct adb_request req;
1875 struct pci_dev *grackle;
1876
1877 grackle = pci_get_domain_bus_and_slot(0, 0, 0);
1878 if (!grackle)
1879 return -ENODEV;
1880
1881 /* Turn off various things. Darwin does some retry tests here... */
1882 pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
1883 pmu_wait_complete(&req);
1884 pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1885 PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1886 pmu_wait_complete(&req);
1887
1888 /* For 750, save backside cache setting and disable it */
1889 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
1890
1891 if (!__fake_sleep) {
1892 /* Ask the PMU to put us to sleep */
1893 pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1894 pmu_wait_complete(&req);
1895 }
1896
1897 /* The VIA is supposed not to be restored correctly*/
1898 save_via_state();
1899 /* We shut down some HW */
1900 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
1901
1902 pci_read_config_word(grackle, 0x70, &pmcr1);
1903 /* Apparently, MacOS uses NAP mode for Grackle ??? */
1904 pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP);
1905 pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
1906 pci_write_config_word(grackle, 0x70, pmcr1);
1907
1908 /* Call low-level ASM sleep handler */
1909 if (__fake_sleep)
1910 mdelay(5000);
1911 else
1912 low_sleep_handler();
1913
1914 /* We're awake again, stop grackle PM */
1915 pci_read_config_word(grackle, 0x70, &pmcr1);
1916 pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP);
1917 pci_write_config_word(grackle, 0x70, pmcr1);
1918
1919 pci_dev_put(grackle);
1920
1921 /* Make sure the PMU is idle */
1922 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
1923 restore_via_state();
1924
1925 /* Restore L2 cache */
1926 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
1927 _set_L2CR(save_l2cr);
1928
1929 /* Restore userland MMU context */
1930 switch_mmu_context(NULL, current->active_mm, NULL);
1931
1932 /* Power things up */
1933 pmu_unlock();
1934 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
1935 pmu_wait_complete(&req);
1936 pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
1937 PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
1938 pmu_wait_complete(&req);
1939 pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1940 PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1941 pmu_wait_complete(&req);
1942
1943 return 0;
1944 }
1945
1946 static int
powerbook_sleep_Core99(void)1947 powerbook_sleep_Core99(void)
1948 {
1949 unsigned long save_l2cr;
1950 unsigned long save_l3cr;
1951 struct adb_request req;
1952
1953 if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
1954 printk(KERN_ERR "Sleep mode not supported on this machine\n");
1955 return -ENOSYS;
1956 }
1957
1958 if (num_online_cpus() > 1 || cpu_is_offline(0))
1959 return -EAGAIN;
1960
1961 /* Stop environment and ADB interrupts */
1962 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
1963 pmu_wait_complete(&req);
1964
1965 /* Tell PMU what events will wake us up */
1966 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
1967 0xff, 0xff);
1968 pmu_wait_complete(&req);
1969 pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
1970 0, PMU_PWR_WAKEUP_KEY |
1971 (option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
1972 pmu_wait_complete(&req);
1973
1974 /* Save the state of the L2 and L3 caches */
1975 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
1976 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
1977
1978 if (!__fake_sleep) {
1979 /* Ask the PMU to put us to sleep */
1980 pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1981 pmu_wait_complete(&req);
1982 }
1983
1984 /* The VIA is supposed not to be restored correctly*/
1985 save_via_state();
1986
1987 /* Shut down various ASICs. There's a chance that we can no longer
1988 * talk to the PMU after this, so I moved it to _after_ sending the
1989 * sleep command to it. Still need to be checked.
1990 */
1991 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
1992
1993 /* Call low-level ASM sleep handler */
1994 if (__fake_sleep)
1995 mdelay(5000);
1996 else
1997 low_sleep_handler();
1998
1999 /* Restore Apple core ASICs state */
2000 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
2001
2002 /* Restore VIA */
2003 restore_via_state();
2004
2005 /* tweak LPJ before cpufreq is there */
2006 loops_per_jiffy *= 2;
2007
2008 /* Restore video */
2009 pmac_call_early_video_resume();
2010
2011 /* Restore L2 cache */
2012 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
2013 _set_L2CR(save_l2cr);
2014 /* Restore L3 cache */
2015 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
2016 _set_L3CR(save_l3cr);
2017
2018 /* Restore userland MMU context */
2019 switch_mmu_context(NULL, current->active_mm, NULL);
2020
2021 /* Tell PMU we are ready */
2022 pmu_unlock();
2023 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
2024 pmu_wait_complete(&req);
2025 pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
2026 pmu_wait_complete(&req);
2027
2028 /* Restore LPJ, cpufreq will adjust the cpu frequency */
2029 loops_per_jiffy /= 2;
2030
2031 return 0;
2032 }
2033
2034 #define PB3400_MEM_CTRL 0xf8000000
2035 #define PB3400_MEM_CTRL_SLEEP 0x70
2036
2037 static void __iomem *pb3400_mem_ctrl;
2038
powerbook_sleep_init_3400(void)2039 static void powerbook_sleep_init_3400(void)
2040 {
2041 /* map in the memory controller registers */
2042 pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
2043 if (pb3400_mem_ctrl == NULL)
2044 printk(KERN_WARNING "ioremap failed: sleep won't be possible");
2045 }
2046
powerbook_sleep_3400(void)2047 static int powerbook_sleep_3400(void)
2048 {
2049 int i, x;
2050 unsigned int hid0;
2051 unsigned long msr;
2052 struct adb_request sleep_req;
2053 unsigned int __iomem *mem_ctrl_sleep;
2054
2055 if (pb3400_mem_ctrl == NULL)
2056 return -ENOMEM;
2057 mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
2058
2059 /* Set the memory controller to keep the memory refreshed
2060 while we're asleep */
2061 for (i = 0x403f; i >= 0x4000; --i) {
2062 out_be32(mem_ctrl_sleep, i);
2063 do {
2064 x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
2065 } while (x == 0);
2066 if (x >= 0x100)
2067 break;
2068 }
2069
2070 /* Ask the PMU to put us to sleep */
2071 pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
2072 pmu_wait_complete(&sleep_req);
2073 pmu_unlock();
2074
2075 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
2076
2077 asleep = 1;
2078
2079 /* Put the CPU into sleep mode */
2080 hid0 = mfspr(SPRN_HID0);
2081 hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
2082 mtspr(SPRN_HID0, hid0);
2083 local_irq_enable();
2084 msr = mfmsr() | MSR_POW;
2085 while (asleep) {
2086 mb();
2087 mtmsr(msr);
2088 isync();
2089 }
2090 local_irq_disable();
2091
2092 /* OK, we're awake again, start restoring things */
2093 out_be32(mem_ctrl_sleep, 0x3f);
2094 pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
2095
2096 return 0;
2097 }
2098
2099 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2100
2101 /*
2102 * Support for /dev/pmu device
2103 */
2104 #define RB_SIZE 0x10
2105 struct pmu_private {
2106 struct list_head list;
2107 int rb_get;
2108 int rb_put;
2109 struct rb_entry {
2110 unsigned short len;
2111 unsigned char data[16];
2112 } rb_buf[RB_SIZE];
2113 wait_queue_head_t wait;
2114 spinlock_t lock;
2115 #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2116 int backlight_locker;
2117 #endif
2118 };
2119
2120 static LIST_HEAD(all_pmu_pvt);
2121 static DEFINE_SPINLOCK(all_pvt_lock);
2122
2123 static void
pmu_pass_intr(unsigned char * data,int len)2124 pmu_pass_intr(unsigned char *data, int len)
2125 {
2126 struct pmu_private *pp;
2127 struct list_head *list;
2128 int i;
2129 unsigned long flags;
2130
2131 if (len > sizeof(pp->rb_buf[0].data))
2132 len = sizeof(pp->rb_buf[0].data);
2133 spin_lock_irqsave(&all_pvt_lock, flags);
2134 for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
2135 pp = list_entry(list, struct pmu_private, list);
2136 spin_lock(&pp->lock);
2137 i = pp->rb_put + 1;
2138 if (i >= RB_SIZE)
2139 i = 0;
2140 if (i != pp->rb_get) {
2141 struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
2142 rp->len = len;
2143 memcpy(rp->data, data, len);
2144 pp->rb_put = i;
2145 wake_up_interruptible(&pp->wait);
2146 }
2147 spin_unlock(&pp->lock);
2148 }
2149 spin_unlock_irqrestore(&all_pvt_lock, flags);
2150 }
2151
2152 static int
pmu_open(struct inode * inode,struct file * file)2153 pmu_open(struct inode *inode, struct file *file)
2154 {
2155 struct pmu_private *pp;
2156 unsigned long flags;
2157
2158 pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
2159 if (!pp)
2160 return -ENOMEM;
2161 pp->rb_get = pp->rb_put = 0;
2162 spin_lock_init(&pp->lock);
2163 init_waitqueue_head(&pp->wait);
2164 mutex_lock(&pmu_info_proc_mutex);
2165 spin_lock_irqsave(&all_pvt_lock, flags);
2166 #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2167 pp->backlight_locker = 0;
2168 #endif
2169 list_add(&pp->list, &all_pmu_pvt);
2170 spin_unlock_irqrestore(&all_pvt_lock, flags);
2171 file->private_data = pp;
2172 mutex_unlock(&pmu_info_proc_mutex);
2173 return 0;
2174 }
2175
2176 static ssize_t
pmu_read(struct file * file,char __user * buf,size_t count,loff_t * ppos)2177 pmu_read(struct file *file, char __user *buf,
2178 size_t count, loff_t *ppos)
2179 {
2180 struct pmu_private *pp = file->private_data;
2181 DECLARE_WAITQUEUE(wait, current);
2182 unsigned long flags;
2183 int ret = 0;
2184
2185 if (count < 1 || !pp)
2186 return -EINVAL;
2187
2188 spin_lock_irqsave(&pp->lock, flags);
2189 add_wait_queue(&pp->wait, &wait);
2190 set_current_state(TASK_INTERRUPTIBLE);
2191
2192 for (;;) {
2193 ret = -EAGAIN;
2194 if (pp->rb_get != pp->rb_put) {
2195 int i = pp->rb_get;
2196 struct rb_entry *rp = &pp->rb_buf[i];
2197 ret = rp->len;
2198 spin_unlock_irqrestore(&pp->lock, flags);
2199 if (ret > count)
2200 ret = count;
2201 if (ret > 0 && copy_to_user(buf, rp->data, ret))
2202 ret = -EFAULT;
2203 if (++i >= RB_SIZE)
2204 i = 0;
2205 spin_lock_irqsave(&pp->lock, flags);
2206 pp->rb_get = i;
2207 }
2208 if (ret >= 0)
2209 break;
2210 if (file->f_flags & O_NONBLOCK)
2211 break;
2212 ret = -ERESTARTSYS;
2213 if (signal_pending(current))
2214 break;
2215 spin_unlock_irqrestore(&pp->lock, flags);
2216 schedule();
2217 spin_lock_irqsave(&pp->lock, flags);
2218 }
2219 __set_current_state(TASK_RUNNING);
2220 remove_wait_queue(&pp->wait, &wait);
2221 spin_unlock_irqrestore(&pp->lock, flags);
2222
2223 return ret;
2224 }
2225
2226 static ssize_t
pmu_write(struct file * file,const char __user * buf,size_t count,loff_t * ppos)2227 pmu_write(struct file *file, const char __user *buf,
2228 size_t count, loff_t *ppos)
2229 {
2230 return 0;
2231 }
2232
2233 static __poll_t
pmu_fpoll(struct file * filp,poll_table * wait)2234 pmu_fpoll(struct file *filp, poll_table *wait)
2235 {
2236 struct pmu_private *pp = filp->private_data;
2237 __poll_t mask = 0;
2238 unsigned long flags;
2239
2240 if (!pp)
2241 return 0;
2242 poll_wait(filp, &pp->wait, wait);
2243 spin_lock_irqsave(&pp->lock, flags);
2244 if (pp->rb_get != pp->rb_put)
2245 mask |= EPOLLIN;
2246 spin_unlock_irqrestore(&pp->lock, flags);
2247 return mask;
2248 }
2249
2250 static int
pmu_release(struct inode * inode,struct file * file)2251 pmu_release(struct inode *inode, struct file *file)
2252 {
2253 struct pmu_private *pp = file->private_data;
2254 unsigned long flags;
2255
2256 if (pp) {
2257 file->private_data = NULL;
2258 spin_lock_irqsave(&all_pvt_lock, flags);
2259 list_del(&pp->list);
2260 spin_unlock_irqrestore(&all_pvt_lock, flags);
2261
2262 #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2263 if (pp->backlight_locker)
2264 pmac_backlight_enable();
2265 #endif
2266
2267 kfree(pp);
2268 }
2269 return 0;
2270 }
2271
2272 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
pmac_suspend_disable_irqs(void)2273 static void pmac_suspend_disable_irqs(void)
2274 {
2275 /* Call platform functions marked "on sleep" */
2276 pmac_pfunc_i2c_suspend();
2277 pmac_pfunc_base_suspend();
2278 }
2279
powerbook_sleep(suspend_state_t state)2280 static int powerbook_sleep(suspend_state_t state)
2281 {
2282 int error = 0;
2283
2284 /* Wait for completion of async requests */
2285 while (!batt_req.complete)
2286 pmu_poll();
2287
2288 /* Giveup the lazy FPU & vec so we don't have to back them
2289 * up from the low level code
2290 */
2291 enable_kernel_fp();
2292
2293 #ifdef CONFIG_ALTIVEC
2294 if (cpu_has_feature(CPU_FTR_ALTIVEC))
2295 enable_kernel_altivec();
2296 #endif /* CONFIG_ALTIVEC */
2297
2298 switch (pmu_kind) {
2299 case PMU_OHARE_BASED:
2300 error = powerbook_sleep_3400();
2301 break;
2302 case PMU_HEATHROW_BASED:
2303 case PMU_PADDINGTON_BASED:
2304 error = powerbook_sleep_grackle();
2305 break;
2306 case PMU_KEYLARGO_BASED:
2307 error = powerbook_sleep_Core99();
2308 break;
2309 default:
2310 return -ENOSYS;
2311 }
2312
2313 if (error)
2314 return error;
2315
2316 mdelay(100);
2317
2318 return 0;
2319 }
2320
pmac_suspend_enable_irqs(void)2321 static void pmac_suspend_enable_irqs(void)
2322 {
2323 /* Force a poll of ADB interrupts */
2324 adb_int_pending = 1;
2325 via_pmu_interrupt(0, NULL);
2326
2327 mdelay(10);
2328
2329 /* Call platform functions marked "on wake" */
2330 pmac_pfunc_base_resume();
2331 pmac_pfunc_i2c_resume();
2332 }
2333
pmu_sleep_valid(suspend_state_t state)2334 static int pmu_sleep_valid(suspend_state_t state)
2335 {
2336 return state == PM_SUSPEND_MEM
2337 && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
2338 }
2339
2340 static const struct platform_suspend_ops pmu_pm_ops = {
2341 .enter = powerbook_sleep,
2342 .valid = pmu_sleep_valid,
2343 };
2344
register_pmu_pm_ops(void)2345 static int register_pmu_pm_ops(void)
2346 {
2347 if (pmu_kind == PMU_OHARE_BASED)
2348 powerbook_sleep_init_3400();
2349 ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs;
2350 ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs;
2351 suspend_set_ops(&pmu_pm_ops);
2352
2353 return 0;
2354 }
2355
2356 device_initcall(register_pmu_pm_ops);
2357 #endif
2358
pmu_ioctl(struct file * filp,u_int cmd,u_long arg)2359 static int pmu_ioctl(struct file *filp,
2360 u_int cmd, u_long arg)
2361 {
2362 __u32 __user *argp = (__u32 __user *)arg;
2363 int error = -EINVAL;
2364
2365 switch (cmd) {
2366 #ifdef CONFIG_PPC_PMAC
2367 case PMU_IOC_SLEEP:
2368 if (!capable(CAP_SYS_ADMIN))
2369 return -EACCES;
2370 return pm_suspend(PM_SUSPEND_MEM);
2371 case PMU_IOC_CAN_SLEEP:
2372 if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)
2373 return put_user(0, argp);
2374 else
2375 return put_user(1, argp);
2376 #endif
2377
2378 #ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
2379 /* Compatibility ioctl's for backlight */
2380 case PMU_IOC_GET_BACKLIGHT:
2381 {
2382 int brightness;
2383
2384 brightness = pmac_backlight_get_legacy_brightness();
2385 if (brightness < 0)
2386 return brightness;
2387 else
2388 return put_user(brightness, argp);
2389
2390 }
2391 case PMU_IOC_SET_BACKLIGHT:
2392 {
2393 int brightness;
2394
2395 error = get_user(brightness, argp);
2396 if (error)
2397 return error;
2398
2399 return pmac_backlight_set_legacy_brightness(brightness);
2400 }
2401 #ifdef CONFIG_INPUT_ADBHID
2402 case PMU_IOC_GRAB_BACKLIGHT: {
2403 struct pmu_private *pp = filp->private_data;
2404
2405 if (pp->backlight_locker)
2406 return 0;
2407
2408 pp->backlight_locker = 1;
2409 pmac_backlight_disable();
2410
2411 return 0;
2412 }
2413 #endif /* CONFIG_INPUT_ADBHID */
2414 #endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */
2415
2416 case PMU_IOC_GET_MODEL:
2417 return put_user(pmu_kind, argp);
2418 case PMU_IOC_HAS_ADB:
2419 return put_user(pmu_has_adb, argp);
2420 }
2421 return error;
2422 }
2423
pmu_unlocked_ioctl(struct file * filp,u_int cmd,u_long arg)2424 static long pmu_unlocked_ioctl(struct file *filp,
2425 u_int cmd, u_long arg)
2426 {
2427 int ret;
2428
2429 mutex_lock(&pmu_info_proc_mutex);
2430 ret = pmu_ioctl(filp, cmd, arg);
2431 mutex_unlock(&pmu_info_proc_mutex);
2432
2433 return ret;
2434 }
2435
2436 #ifdef CONFIG_COMPAT
2437 #define PMU_IOC_GET_BACKLIGHT32 _IOR('B', 1, compat_size_t)
2438 #define PMU_IOC_SET_BACKLIGHT32 _IOW('B', 2, compat_size_t)
2439 #define PMU_IOC_GET_MODEL32 _IOR('B', 3, compat_size_t)
2440 #define PMU_IOC_HAS_ADB32 _IOR('B', 4, compat_size_t)
2441 #define PMU_IOC_CAN_SLEEP32 _IOR('B', 5, compat_size_t)
2442 #define PMU_IOC_GRAB_BACKLIGHT32 _IOR('B', 6, compat_size_t)
2443
compat_pmu_ioctl(struct file * filp,u_int cmd,u_long arg)2444 static long compat_pmu_ioctl (struct file *filp, u_int cmd, u_long arg)
2445 {
2446 switch (cmd) {
2447 case PMU_IOC_SLEEP:
2448 break;
2449 case PMU_IOC_GET_BACKLIGHT32:
2450 cmd = PMU_IOC_GET_BACKLIGHT;
2451 break;
2452 case PMU_IOC_SET_BACKLIGHT32:
2453 cmd = PMU_IOC_SET_BACKLIGHT;
2454 break;
2455 case PMU_IOC_GET_MODEL32:
2456 cmd = PMU_IOC_GET_MODEL;
2457 break;
2458 case PMU_IOC_HAS_ADB32:
2459 cmd = PMU_IOC_HAS_ADB;
2460 break;
2461 case PMU_IOC_CAN_SLEEP32:
2462 cmd = PMU_IOC_CAN_SLEEP;
2463 break;
2464 case PMU_IOC_GRAB_BACKLIGHT32:
2465 cmd = PMU_IOC_GRAB_BACKLIGHT;
2466 break;
2467 default:
2468 return -ENOIOCTLCMD;
2469 }
2470 return pmu_unlocked_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
2471 }
2472 #endif
2473
2474 static const struct file_operations pmu_device_fops = {
2475 .read = pmu_read,
2476 .write = pmu_write,
2477 .poll = pmu_fpoll,
2478 .unlocked_ioctl = pmu_unlocked_ioctl,
2479 #ifdef CONFIG_COMPAT
2480 .compat_ioctl = compat_pmu_ioctl,
2481 #endif
2482 .open = pmu_open,
2483 .release = pmu_release,
2484 .llseek = noop_llseek,
2485 };
2486
2487 static struct miscdevice pmu_device = {
2488 PMU_MINOR, "pmu", &pmu_device_fops
2489 };
2490
pmu_device_init(void)2491 static int pmu_device_init(void)
2492 {
2493 if (pmu_state == uninitialized)
2494 return 0;
2495 if (misc_register(&pmu_device) < 0)
2496 printk(KERN_ERR "via-pmu: cannot register misc device.\n");
2497 return 0;
2498 }
2499 device_initcall(pmu_device_init);
2500
2501
2502 #ifdef DEBUG_SLEEP
2503 static inline void
polled_handshake(void)2504 polled_handshake(void)
2505 {
2506 via2[B] &= ~TREQ; eieio();
2507 while ((via2[B] & TACK) != 0)
2508 ;
2509 via2[B] |= TREQ; eieio();
2510 while ((via2[B] & TACK) == 0)
2511 ;
2512 }
2513
2514 static inline void
polled_send_byte(int x)2515 polled_send_byte(int x)
2516 {
2517 via1[ACR] |= SR_OUT | SR_EXT; eieio();
2518 via1[SR] = x; eieio();
2519 polled_handshake();
2520 }
2521
2522 static inline int
polled_recv_byte(void)2523 polled_recv_byte(void)
2524 {
2525 int x;
2526
2527 via1[ACR] = (via1[ACR] & ~SR_OUT) | SR_EXT; eieio();
2528 x = via1[SR]; eieio();
2529 polled_handshake();
2530 x = via1[SR]; eieio();
2531 return x;
2532 }
2533
2534 int
pmu_polled_request(struct adb_request * req)2535 pmu_polled_request(struct adb_request *req)
2536 {
2537 unsigned long flags;
2538 int i, l, c;
2539
2540 req->complete = 1;
2541 c = req->data[0];
2542 l = pmu_data_len[c][0];
2543 if (l >= 0 && req->nbytes != l + 1)
2544 return -EINVAL;
2545
2546 local_irq_save(flags);
2547 while (pmu_state != idle)
2548 pmu_poll();
2549
2550 while ((via2[B] & TACK) == 0)
2551 ;
2552 polled_send_byte(c);
2553 if (l < 0) {
2554 l = req->nbytes - 1;
2555 polled_send_byte(l);
2556 }
2557 for (i = 1; i <= l; ++i)
2558 polled_send_byte(req->data[i]);
2559
2560 l = pmu_data_len[c][1];
2561 if (l < 0)
2562 l = polled_recv_byte();
2563 for (i = 0; i < l; ++i)
2564 req->reply[i + req->reply_len] = polled_recv_byte();
2565
2566 if (req->done)
2567 (*req->done)(req);
2568
2569 local_irq_restore(flags);
2570 return 0;
2571 }
2572
2573 /* N.B. This doesn't work on the 3400 */
pmu_blink(int n)2574 void pmu_blink(int n)
2575 {
2576 struct adb_request req;
2577
2578 memset(&req, 0, sizeof(req));
2579
2580 for (; n > 0; --n) {
2581 req.nbytes = 4;
2582 req.done = NULL;
2583 req.data[0] = 0xee;
2584 req.data[1] = 4;
2585 req.data[2] = 0;
2586 req.data[3] = 1;
2587 req.reply[0] = ADB_RET_OK;
2588 req.reply_len = 1;
2589 req.reply_expected = 0;
2590 pmu_polled_request(&req);
2591 mdelay(50);
2592 req.nbytes = 4;
2593 req.done = NULL;
2594 req.data[0] = 0xee;
2595 req.data[1] = 4;
2596 req.data[2] = 0;
2597 req.data[3] = 0;
2598 req.reply[0] = ADB_RET_OK;
2599 req.reply_len = 1;
2600 req.reply_expected = 0;
2601 pmu_polled_request(&req);
2602 mdelay(50);
2603 }
2604 mdelay(50);
2605 }
2606 #endif /* DEBUG_SLEEP */
2607
2608 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2609 int pmu_sys_suspended;
2610
pmu_syscore_suspend(void)2611 static int pmu_syscore_suspend(void)
2612 {
2613 /* Suspend PMU event interrupts */
2614 pmu_suspend();
2615 pmu_sys_suspended = 1;
2616
2617 #ifdef CONFIG_PMAC_BACKLIGHT
2618 /* Tell backlight code not to muck around with the chip anymore */
2619 pmu_backlight_set_sleep(1);
2620 #endif
2621
2622 return 0;
2623 }
2624
pmu_syscore_resume(void)2625 static void pmu_syscore_resume(void)
2626 {
2627 struct adb_request req;
2628
2629 if (!pmu_sys_suspended)
2630 return;
2631
2632 /* Tell PMU we are ready */
2633 pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
2634 pmu_wait_complete(&req);
2635
2636 #ifdef CONFIG_PMAC_BACKLIGHT
2637 /* Tell backlight code it can use the chip again */
2638 pmu_backlight_set_sleep(0);
2639 #endif
2640 /* Resume PMU event interrupts */
2641 pmu_resume();
2642 pmu_sys_suspended = 0;
2643 }
2644
2645 static struct syscore_ops pmu_syscore_ops = {
2646 .suspend = pmu_syscore_suspend,
2647 .resume = pmu_syscore_resume,
2648 };
2649
pmu_syscore_register(void)2650 static int pmu_syscore_register(void)
2651 {
2652 register_syscore_ops(&pmu_syscore_ops);
2653
2654 return 0;
2655 }
2656 subsys_initcall(pmu_syscore_register);
2657 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2658
2659 EXPORT_SYMBOL(pmu_request);
2660 EXPORT_SYMBOL(pmu_queue_request);
2661 EXPORT_SYMBOL(pmu_poll);
2662 EXPORT_SYMBOL(pmu_poll_adb);
2663 EXPORT_SYMBOL(pmu_wait_complete);
2664 EXPORT_SYMBOL(pmu_suspend);
2665 EXPORT_SYMBOL(pmu_resume);
2666 EXPORT_SYMBOL(pmu_unlock);
2667 #if defined(CONFIG_PPC32)
2668 EXPORT_SYMBOL(pmu_enable_irled);
2669 EXPORT_SYMBOL(pmu_battery_count);
2670 EXPORT_SYMBOL(pmu_batteries);
2671 EXPORT_SYMBOL(pmu_power_flags);
2672 #endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2673
2674