• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
22	tristate "ASUS Z00T TM5P5 NT35596 panel"
23	depends on GPIOLIB && OF
24	depends on DRM_MIPI_DSI
25	depends on BACKLIGHT_CLASS_DEVICE
26	help
27	  Say Y here if you want to enable support for the ASUS TMP5P5
28	  NT35596 1080x1920 video mode panel as found in some Asus
29	  Zenfone 2 Laser Z00T devices.
30
31config DRM_PANEL_BOE_HIMAX8279D
32	tristate "Boe Himax8279d panel"
33	depends on OF
34	depends on DRM_MIPI_DSI
35	depends on BACKLIGHT_CLASS_DEVICE
36	help
37	  Say Y here if you want to enable support for Boe Himax8279d
38	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39	  24 bit RGB per pixel. It provides a MIPI DSI interface to
40	  the host and has a built-in LED backlight.
41
42config DRM_PANEL_BOE_TV101WUM_NL6
43	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
49	  45NA WUXGA PANEL DSI Video Mode panel
50
51config DRM_PANEL_LVDS
52	tristate "Generic LVDS panel driver"
53	depends on OF
54	depends on BACKLIGHT_CLASS_DEVICE
55	select VIDEOMODE_HELPERS
56	help
57	  This driver supports LVDS panels that don't require device-specific
58	  handling of power supplies or control signals. It implements automatic
59	  backlight handling if the panel is attached to a backlight controller.
60
61config DRM_PANEL_SIMPLE
62	tristate "support for simple panels"
63	depends on OF
64	depends on BACKLIGHT_CLASS_DEVICE
65	select VIDEOMODE_HELPERS
66	help
67	  DRM panel driver for dumb panels that need at most a regulator and
68	  a GPIO to be powered up. Optionally a backlight can be attached so
69	  that it can be automatically turned off when the panel goes into a
70	  low power state.
71
72config DRM_PANEL_ELIDA_KD35T133
73	tristate "Elida KD35T133 panel driver"
74	depends on OF
75	depends on DRM_MIPI_DSI
76	depends on BACKLIGHT_CLASS_DEVICE
77	help
78	  Say Y here if you want to enable support for the Elida
79	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
80	  system interfaces.
81
82config DRM_PANEL_FEIXIN_K101_IM2BA02
83	tristate "Feixin K101 IM2BA02 panel"
84	depends on OF
85	depends on DRM_MIPI_DSI
86	depends on BACKLIGHT_CLASS_DEVICE
87	help
88	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
89	  4-lane 800x1280 MIPI DSI panel.
90
91config DRM_PANEL_FEIYANG_FY07024DI26A30D
92	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
93	depends on OF
94	depends on DRM_MIPI_DSI
95	depends on BACKLIGHT_CLASS_DEVICE
96	help
97	  Say Y if you want to enable support for panels based on the
98	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
99
100config DRM_PANEL_ILITEK_IL9322
101	tristate "Ilitek ILI9322 320x240 QVGA panels"
102	depends on OF && SPI
103	select REGMAP
104	help
105	  Say Y here if you want to enable support for Ilitek IL9322
106	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
107
108config DRM_PANEL_ILITEK_ILI9881C
109	tristate "Ilitek ILI9881C-based panels"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y if you want to enable support for panels based on the
115	  Ilitek ILI9881c controller.
116
117config DRM_PANEL_INNOLUX_P079ZCA
118	tristate "Innolux P079ZCA panel"
119	depends on OF
120	depends on DRM_MIPI_DSI
121	depends on BACKLIGHT_CLASS_DEVICE
122	help
123	  Say Y here if you want to enable support for Innolux P079ZCA
124	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
125	  24 bit RGB per pixel. It provides a MIPI DSI interface to
126	  the host and has a built-in LED backlight.
127
128config DRM_PANEL_JDI_LT070ME05000
129	tristate "JDI LT070ME05000 WUXGA DSI panel"
130	depends on OF
131	depends on DRM_MIPI_DSI
132	depends on BACKLIGHT_CLASS_DEVICE
133	help
134	  Say Y here if you want to enable support for JDI DSI video mode
135	  panel as found in Google Nexus 7 (2013) devices.
136	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
137	  24 bit per pixel.
138
139config DRM_PANEL_KINGDISPLAY_KD097D04
140	tristate "Kingdisplay kd097d04 panel"
141	depends on OF
142	depends on DRM_MIPI_DSI
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  Say Y here if you want to enable support for Kingdisplay kd097d04
146	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
147	  24 bit RGB per pixel. It provides a MIPI DSI interface to
148	  the host and has a built-in LED backlight.
149
150config DRM_PANEL_LEADTEK_LTK050H3146W
151	tristate "Leadtek LTK050H3146W panel"
152	depends on OF
153	depends on DRM_MIPI_DSI
154	depends on BACKLIGHT_CLASS_DEVICE
155	help
156	  Say Y here if you want to enable support for Leadtek LTK050H3146W
157	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
158	  24 bit RGB per pixel. It provides a MIPI DSI interface to
159	  the host and has a built-in LED backlight.
160
161config DRM_PANEL_LEADTEK_LTK500HD1829
162	tristate "Leadtek LTK500HD1829 panel"
163	depends on OF
164	depends on DRM_MIPI_DSI
165	depends on BACKLIGHT_CLASS_DEVICE
166	help
167	  Say Y here if you want to enable support for Kingdisplay kd097d04
168	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
169	  24 bit RGB per pixel. It provides a MIPI DSI interface to
170	  the host and has a built-in LED backlight.
171
172config DRM_PANEL_SAMSUNG_LD9040
173	tristate "Samsung LD9040 RGB/SPI panel"
174	depends on OF && SPI
175	select VIDEOMODE_HELPERS
176
177config DRM_PANEL_LG_LB035Q02
178	tristate "LG LB035Q024573 RGB panel"
179	depends on GPIOLIB && OF && SPI
180	help
181	  Say Y here if you want to enable support for the LB035Q02 RGB panel
182	  (found on the Gumstix Overo Palo35 board). To compile this driver as
183	  a module, choose M here.
184
185config DRM_PANEL_LG_LG4573
186	tristate "LG4573 RGB/SPI panel"
187	depends on OF && SPI
188	select VIDEOMODE_HELPERS
189	help
190	  Say Y here if you want to enable support for LG4573 RGB panel.
191	  To compile this driver as a module, choose M here.
192
193config DRM_PANEL_NEC_NL8048HL11
194	tristate "NEC NL8048HL11 RGB panel"
195	depends on GPIOLIB && OF && SPI
196	help
197	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
198	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
199	  as a module, choose M here.
200
201config DRM_PANEL_NOVATEK_NT35510
202	tristate "Novatek NT35510 RGB panel driver"
203	depends on OF
204	depends on DRM_MIPI_DSI
205	depends on BACKLIGHT_CLASS_DEVICE
206	help
207	  Say Y here if you want to enable support for the panels built
208	  around the Novatek NT35510 display controller, such as some
209	  Hydis panels.
210
211config DRM_PANEL_NOVATEK_NT39016
212	tristate "Novatek NT39016 RGB/SPI panel"
213	depends on OF && SPI
214	depends on BACKLIGHT_CLASS_DEVICE
215	select REGMAP_SPI
216	help
217	  Say Y here if you want to enable support for the panels built
218	  around the Novatek NT39016 display controller.
219
220config DRM_PANEL_MANTIX_MLAF057WE51
221	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
222	depends on OF
223	depends on DRM_MIPI_DSI
224	depends on BACKLIGHT_CLASS_DEVICE
225	help
226	  Say Y here if you want to enable support for the Mantix
227	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
228	  has a resolution of 720x1440 pixels, a built in backlight and touch
229	  controller.
230
231config DRM_PANEL_OLIMEX_LCD_OLINUXINO
232	tristate "Olimex LCD-OLinuXino panel"
233	depends on OF
234	depends on I2C
235	depends on BACKLIGHT_CLASS_DEVICE
236	select CRC32
237	help
238	  The panel is used with different sizes LCDs, from 480x272 to
239	  1280x800, and 24 bit per pixel.
240
241	  Say Y here if you want to enable support for Olimex Ltd.
242	  LCD-OLinuXino panel.
243
244config DRM_PANEL_ORISETECH_OTM8009A
245	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
246	depends on OF
247	depends on DRM_MIPI_DSI
248	depends on BACKLIGHT_CLASS_DEVICE
249	help
250	  Say Y here if you want to enable support for Orise Technology
251	  otm8009a 480x800 dsi 2dl panel.
252
253config DRM_PANEL_OSD_OSD101T2587_53TS
254	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
255	depends on OF
256	depends on DRM_MIPI_DSI
257	depends on BACKLIGHT_CLASS_DEVICE
258	help
259	  Say Y here if you want to enable support for One Stop Displays
260	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
261
262config DRM_PANEL_PANASONIC_VVX10F034N00
263	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
264	depends on OF
265	depends on DRM_MIPI_DSI
266	depends on BACKLIGHT_CLASS_DEVICE
267	help
268	  Say Y here if you want to enable support for Panasonic VVX10F034N00
269	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
270	  Xperia Z2 tablets
271
272config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
273	tristate "Raspberry Pi 7-inch touchscreen panel"
274	depends on DRM_MIPI_DSI
275	help
276	  Say Y here if you want to enable support for the Raspberry
277	  Pi 7" Touchscreen.  To compile this driver as a module,
278	  choose M here.
279
280config DRM_PANEL_RAYDIUM_RM67191
281	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
282	depends on OF
283	depends on DRM_MIPI_DSI
284	depends on BACKLIGHT_CLASS_DEVICE
285	help
286	  Say Y here if you want to enable support for Raydium RM67191 FHD
287	  (1080x1920) DSI panel.
288
289config DRM_PANEL_RAYDIUM_RM68200
290	tristate "Raydium RM68200 720x1280 DSI video mode panel"
291	depends on OF
292	depends on DRM_MIPI_DSI
293	depends on BACKLIGHT_CLASS_DEVICE
294	help
295	  Say Y here if you want to enable support for Raydium RM68200
296	  720x1280 DSI video mode panel.
297
298config DRM_PANEL_RONBO_RB070D30
299	tristate "Ronbo Electronics RB070D30 panel"
300	depends on OF
301	depends on DRM_MIPI_DSI
302	depends on BACKLIGHT_CLASS_DEVICE
303	help
304	  Say Y here if you want to enable support for Ronbo Electronics
305	  RB070D30 1024x600 DSI panel.
306
307config DRM_PANEL_SAMSUNG_S6D16D0
308	tristate "Samsung S6D16D0 DSI video mode panel"
309	depends on OF
310	depends on DRM_MIPI_DSI
311	select VIDEOMODE_HELPERS
312
313config DRM_PANEL_SAMSUNG_S6E3HA2
314	tristate "Samsung S6E3HA2 DSI video mode panel"
315	depends on OF
316	depends on DRM_MIPI_DSI
317	depends on BACKLIGHT_CLASS_DEVICE
318	select VIDEOMODE_HELPERS
319
320config DRM_PANEL_SAMSUNG_S6E63J0X03
321	tristate "Samsung S6E63J0X03 DSI command mode panel"
322	depends on OF
323	depends on DRM_MIPI_DSI
324	depends on BACKLIGHT_CLASS_DEVICE
325	select VIDEOMODE_HELPERS
326
327config DRM_PANEL_SAMSUNG_S6E63M0
328	tristate "Samsung S6E63M0 RGB panel"
329	depends on OF
330	depends on BACKLIGHT_CLASS_DEVICE
331	help
332	  Say Y here if you want to enable support for Samsung S6E63M0
333	  AMOLED LCD panel. This panel can be accessed using SPI or
334	  DSI.
335
336config DRM_PANEL_SAMSUNG_S6E63M0_SPI
337	tristate "Samsung S6E63M0 RGB SPI interface"
338	depends on SPI
339	depends on DRM_PANEL_SAMSUNG_S6E63M0
340	default DRM_PANEL_SAMSUNG_S6E63M0
341	help
342	  Say Y here if you want to be able to access the Samsung
343	  S6E63M0 panel using SPI.
344
345config DRM_PANEL_SAMSUNG_S6E63M0_DSI
346	tristate "Samsung S6E63M0 RGB DSI interface"
347	depends on DRM_MIPI_DSI
348	depends on DRM_PANEL_SAMSUNG_S6E63M0
349	help
350	  Say Y here if you want to be able to access the Samsung
351	  S6E63M0 panel using DSI.
352
353config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
354	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
355	depends on OF
356	select DRM_MIPI_DSI
357	select VIDEOMODE_HELPERS
358
359config DRM_PANEL_SAMSUNG_S6E8AA0
360	tristate "Samsung S6E8AA0 DSI video mode panel"
361	depends on OF
362	select DRM_MIPI_DSI
363	select VIDEOMODE_HELPERS
364
365config DRM_PANEL_SEIKO_43WVF1G
366	tristate "Seiko 43WVF1G panel"
367	depends on OF
368	depends on BACKLIGHT_CLASS_DEVICE
369	select VIDEOMODE_HELPERS
370	help
371	  Say Y here if you want to enable support for the Seiko
372	  43WVF1G controller for 800x480 LCD panels
373
374config DRM_PANEL_SHARP_LQ101R1SX01
375	tristate "Sharp LQ101R1SX01 panel"
376	depends on OF
377	depends on DRM_MIPI_DSI
378	depends on BACKLIGHT_CLASS_DEVICE
379	help
380	  Say Y here if you want to enable support for Sharp LQ101R1SX01
381	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
382	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
383	  the host and has a built-in LED backlight.
384
385	  To compile this driver as a module, choose M here: the module
386	  will be called panel-sharp-lq101r1sx01.
387
388config DRM_PANEL_SHARP_LS037V7DW01
389	tristate "Sharp LS037V7DW01 VGA LCD panel"
390	depends on GPIOLIB && OF && REGULATOR
391	help
392	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
393	  (480x640) LCD panel (found on the TI SDP3430 board).
394
395config DRM_PANEL_SHARP_LS043T1LE01
396	tristate "Sharp LS043T1LE01 qHD video mode panel"
397	depends on OF
398	depends on DRM_MIPI_DSI
399	depends on BACKLIGHT_CLASS_DEVICE
400	help
401	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
402	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
403
404config DRM_PANEL_SITRONIX_ST7701
405	tristate "Sitronix ST7701 panel driver"
406	depends on OF
407	depends on DRM_MIPI_DSI
408	depends on BACKLIGHT_CLASS_DEVICE
409	help
410	  Say Y here if you want to enable support for the Sitronix
411	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
412	  system interfaces.
413
414config DRM_PANEL_SITRONIX_ST7703
415	tristate "Sitronix ST7703 based MIPI touchscreen panels"
416	depends on OF
417	depends on DRM_MIPI_DSI
418	depends on BACKLIGHT_CLASS_DEVICE
419	help
420	  Say Y here if you want to enable support for Sitronix ST7703 based
421	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
422	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
423	  in backlight and touch controller.
424	  Touch input support is provided by the goodix driver and needs to be
425	  selected separately.
426
427config DRM_PANEL_SITRONIX_ST7789V
428	tristate "Sitronix ST7789V panel"
429	depends on OF && SPI
430	depends on BACKLIGHT_CLASS_DEVICE
431	help
432	  Say Y here if you want to enable support for the Sitronix
433	  ST7789V controller for 240x320 LCD panels
434
435config DRM_PANEL_SONY_ACX424AKP
436	tristate "Sony ACX424AKP DSI command mode panel"
437	depends on OF
438	depends on DRM_MIPI_DSI
439	depends on BACKLIGHT_CLASS_DEVICE
440	select VIDEOMODE_HELPERS
441	help
442	  Say Y here if you want to enable the Sony ACX424 display
443	  panel. This panel supports DSI in both command and video
444	  mode.
445
446config DRM_PANEL_SONY_ACX565AKM
447	tristate "Sony ACX565AKM panel"
448	depends on GPIOLIB && OF && SPI
449	depends on BACKLIGHT_CLASS_DEVICE
450	help
451	  Say Y here if you want to enable support for the Sony ACX565AKM
452	  800x600 3.5" panel (found on the Nokia N900).
453
454config DRM_PANEL_TPO_TD028TTEC1
455	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
456	depends on OF && SPI
457	depends on BACKLIGHT_CLASS_DEVICE
458	help
459	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
460	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
461
462config DRM_PANEL_TPO_TD043MTEA1
463	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
464	depends on GPIOLIB && OF && REGULATOR && SPI
465	help
466	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
467	  4.3" panel (found on the OMAP3 Pandora board).
468
469config DRM_PANEL_TPO_TPG110
470	tristate "TPO TPG 800x400 panel"
471	depends on OF && SPI && GPIOLIB
472	depends on BACKLIGHT_CLASS_DEVICE
473	help
474	  Say Y here if you want to enable support for TPO TPG110
475	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
476	  800x400 LCD panels.
477
478config DRM_PANEL_TRULY_NT35597_WQXGA
479	tristate "Truly WQXGA"
480	depends on OF
481	depends on DRM_MIPI_DSI
482	help
483	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
484	  Video Mode panel
485
486config DRM_PANEL_VISIONOX_RM69299
487	tristate "Visionox RM69299"
488	depends on OF
489	depends on DRM_MIPI_DSI
490	help
491	  Say Y here if you want to enable support for Visionox
492	  RM69299  DSI Video Mode panel.
493
494config DRM_PANEL_XINPENG_XPP055C272
495	tristate "Xinpeng XPP055C272 panel driver"
496	depends on OF
497	depends on DRM_MIPI_DSI
498	depends on BACKLIGHT_CLASS_DEVICE
499	help
500	  Say Y here if you want to enable support for the Xinpeng
501	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
502	  system interfaces.
503endmenu
504