1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Support for Intel Camera Imaging ISP subsystem. 4 * Copyright (c) 2015, Intel Corporation. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms and conditions of the GNU General Public License, 8 * version 2, as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 * more details. 14 */ 15 16 #ifndef _ibuf_cntrl_defs_h_ 17 #define _ibuf_cntrl_defs_h_ 18 19 #include <stream2mmio_defs.h> 20 #include <dma_v2_defs.h> 21 22 #define _IBUF_CNTRL_REG_ALIGN 4 23 /* alignment of register banks, first bank are shared configuration and status registers: */ 24 #define _IBUF_CNTRL_PROC_REG_ALIGN 32 25 26 /* the actual amount of configuration registers per proc: */ 27 #define _IBUF_CNTRL_CONFIG_REGS_PER_PROC 18 28 /* the actual amount of shared configuration registers: */ 29 #define _IBUF_CNTRL_CONFIG_REGS_NO_PROC 0 30 31 /* the actual amount of status registers per proc */ 32 #define _IBUF_CNTRL_STATUS_REGS_PER_PROC (_IBUF_CNTRL_CONFIG_REGS_PER_PROC + 10) 33 /* the actual amount shared status registers */ 34 #define _IBUF_CNTRL_STATUS_REGS_NO_PROC (_IBUF_CNTRL_CONFIG_REGS_NO_PROC + 2) 35 36 /* time out bits, maximum time out value is 2^_IBUF_CNTRL_TIME_OUT_BITS - 1 */ 37 #define _IBUF_CNTRL_TIME_OUT_BITS 5 38 39 /* command token definition */ 40 #define _IBUF_CNTRL_CMD_TOKEN_LSB 0 41 #define _IBUF_CNTRL_CMD_TOKEN_MSB 1 42 43 /* Str2MMIO defines */ 44 #define _IBUF_CNTRL_STREAM2MMIO_CMD_TOKEN_MSB _STREAM2MMIO_CMD_TOKEN_CMD_MSB 45 #define _IBUF_CNTRL_STREAM2MMIO_CMD_TOKEN_LSB _STREAM2MMIO_CMD_TOKEN_CMD_LSB 46 #define _IBUF_CNTRL_STREAM2MMIO_NUM_ITEMS_BITS _STREAM2MMIO_PACK_NUM_ITEMS_BITS 47 #define _IBUF_CNTRL_STREAM2MMIO_ACK_EOF_BIT _STREAM2MMIO_PACK_ACK_EOF_BIT 48 #define _IBUF_CNTRL_STREAM2MMIO_ACK_TOKEN_VALID_BIT _STREAM2MMIO_ACK_TOKEN_VALID_BIT 49 50 /* acknowledge token definition */ 51 #define _IBUF_CNTRL_ACK_TOKEN_STORES_IDX 0 52 #define _IBUF_CNTRL_ACK_TOKEN_STORES_BITS 15 53 #define _IBUF_CNTRL_ACK_TOKEN_ITEMS_IDX (_IBUF_CNTRL_ACK_TOKEN_STORES_BITS + _IBUF_CNTRL_ACK_TOKEN_STORES_IDX) 54 #define _IBUF_CNTRL_ACK_TOKEN_ITEMS_BITS _STREAM2MMIO_PACK_NUM_ITEMS_BITS 55 #define _IBUF_CNTRL_ACK_TOKEN_LSB _IBUF_CNTRL_ACK_TOKEN_STORES_IDX 56 #define _IBUF_CNTRL_ACK_TOKEN_MSB (_IBUF_CNTRL_ACK_TOKEN_ITEMS_BITS + _IBUF_CNTRL_ACK_TOKEN_ITEMS_IDX - 1) 57 /* bit 31 indicates a valid ack: */ 58 #define _IBUF_CNTRL_ACK_TOKEN_VALID_BIT (_IBUF_CNTRL_ACK_TOKEN_ITEMS_BITS + _IBUF_CNTRL_ACK_TOKEN_ITEMS_IDX) 59 60 /*shared registers:*/ 61 #define _IBUF_CNTRL_RECALC_WORDS_STATUS 0 62 #define _IBUF_CNTRL_ARBITERS_STATUS 1 63 64 #define _IBUF_CNTRL_SET_CRUN 2 /* NO PHYSICAL REGISTER!! Only used in HSS model */ 65 66 /*register addresses for each proc: */ 67 #define _IBUF_CNTRL_CMD 0 68 #define _IBUF_CNTRL_ACK 1 69 70 /* number of items (packets or words) per frame: */ 71 #define _IBUF_CNTRL_NUM_ITEMS_PER_STORE 2 72 73 /* number of stores (packets or words) per store/buffer: */ 74 #define _IBUF_CNTRL_NUM_STORES_PER_FRAME 3 75 76 /* the channel and command in the DMA */ 77 #define _IBUF_CNTRL_DMA_CHANNEL 4 78 #define _IBUF_CNTRL_DMA_CMD 5 79 80 /* the start address and stride of the buffers */ 81 #define _IBUF_CNTRL_BUFFER_START_ADDRESS 6 82 #define _IBUF_CNTRL_BUFFER_STRIDE 7 83 #define _IBUF_CNTRL_BUFFER_END_ADDRESS 8 84 85 /* destination start address, stride and end address; should be the same as in the DMA */ 86 #define _IBUF_CNTRL_DEST_START_ADDRESS 9 87 #define _IBUF_CNTRL_DEST_STRIDE 10 88 #define _IBUF_CNTRL_DEST_END_ADDRESS 11 89 90 /* send a frame sync or not, default 1 */ 91 #define _IBUF_CNTRL_SYNC_FRAME 12 92 93 /* str2mmio cmds */ 94 #define _IBUF_CNTRL_STR2MMIO_SYNC_CMD 13 95 #define _IBUF_CNTRL_STR2MMIO_STORE_CMD 14 96 97 /* num elems p word*/ 98 #define _IBUF_CNTRL_SHIFT_ITEMS 15 99 #define _IBUF_CNTRL_ELEMS_P_WORD_IBUF 16 100 #define _IBUF_CNTRL_ELEMS_P_WORD_DEST 17 101 102 /* STATUS */ 103 /* current frame and stores in buffer */ 104 #define _IBUF_CNTRL_CUR_STORES 18 105 #define _IBUF_CNTRL_CUR_ACKS 19 106 107 /* current buffer and destination address for DMA cmd's */ 108 #define _IBUF_CNTRL_CUR_S2M_IBUF_ADDR 20 109 #define _IBUF_CNTRL_CUR_DMA_IBUF_ADDR 21 110 #define _IBUF_CNTRL_CUR_DMA_DEST_ADDR 22 111 #define _IBUF_CNTRL_CUR_ISP_DEST_ADDR 23 112 113 #define _IBUF_CNTRL_CUR_NR_DMA_CMDS_SEND 24 114 115 #define _IBUF_CNTRL_MAIN_CNTRL_STATE 25 116 #define _IBUF_CNTRL_DMA_SYNC_STATE 26 117 #define _IBUF_CNTRL_ISP_SYNC_STATE 27 118 119 /*Commands: */ 120 #define _IBUF_CNTRL_CMD_STORE_FRAME_IDX 0 121 #define _IBUF_CNTRL_CMD_ONLINE_IDX 1 122 123 /* initialize, copy st_addr to cur_addr etc */ 124 #define _IBUF_CNTRL_CMD_INITIALIZE 0 125 126 /* store an online frame (sync with ISP, use end cfg start, stride and end address: */ 127 #define _IBUF_CNTRL_CMD_STORE_ONLINE_FRAME ((1 << _IBUF_CNTRL_CMD_STORE_FRAME_IDX) | (1 << _IBUF_CNTRL_CMD_ONLINE_IDX)) 128 129 /* store an offline frame (don't sync with ISP, requires start address as 2nd token, no end address: */ 130 #define _IBUF_CNTRL_CMD_STORE_OFFLINE_FRAME BIT(_IBUF_CNTRL_CMD_STORE_FRAME_IDX) 131 132 /* false command token, should be different then commands. Use online bit, not store frame: */ 133 #define _IBUF_CNTRL_FALSE_ACK 2 134 135 #endif 136