635 	pr_probeinfo->io_addr = 0;  in blogic_init_mm_probeinfo()
647 		unsigned long io_addr;  in blogic_init_mm_probeinfo()  local
659 		io_addr = base_addr0 = pci_resource_start(pci_device, 0);  in blogic_init_mm_probeinfo()
664 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_mm_probeinfo()
674 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_mm_probeinfo()
679 …PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);  in blogic_init_mm_probeinfo()
687 		host_adapter->io_addr = io_addr;  in blogic_init_mm_probeinfo()
741 			pr_probeinfo->io_addr = io_addr;  in blogic_init_mm_probeinfo()
753 			probeinfo->io_addr = io_addr;  in blogic_init_mm_probeinfo()
789 		unsigned long io_addr;  in blogic_init_mm_probeinfo()  local
800 		io_addr = pci_resource_start(pci_device, 0);  in blogic_init_mm_probeinfo()
802 		if (io_addr == 0 || irq_ch == 0)  in blogic_init_mm_probeinfo()
807 			if (probeinfo->io_addr == io_addr &&  in blogic_init_mm_probeinfo()
845 		unsigned long io_addr;  in blogic_init_fp_probeinfo()  local
857 		io_addr = base_addr0 = pci_resource_start(pci_device, 0);  in blogic_init_fp_probeinfo()
862 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_fp_probeinfo()
872 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_fp_probeinfo()
877 …PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);  in blogic_init_fp_probeinfo()
884 			probeinfo->io_addr = io_addr;  in blogic_init_fp_probeinfo()
895 …c: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch…  in blogic_init_fp_probeinfo()
949 				myadapter->io_addr = probeinfo->io_addr;  in blogic_init_probeinfo_list()
996 …%lX PCI Address 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_add…  in blogic_failure()
998 …_err("While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n", adapter, adapter->io_addr);  in blogic_failure()
1021 		fpinfo->base_addr = (u32) adapter->io_addr;  in blogic_probe()
1027 …/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_add…  in blogic_probe()
1032 			blogic_notice("BusLogic_Probe(0x%lX): FlashPoint Found\n", adapter, adapter->io_addr);  in blogic_probe()
1049 …: Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, i…  in blogic_probe()
1128 …rdwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);  in blogic_hwreset()
1148 …areReset(0x%lX): Diagnostic Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);  in blogic_hwreset()
1164 …dwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);  in blogic_hwreset()
1221 				adapter->io_addr,  in blogic_checkadapter()
1710 …ddress: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch,…  in blogic_reportconfig()
2147 	host->unique_id = adapter->io_addr;  in blogic_inithoststruct()
2239 		if (probeinfo->io_addr == 0)  in blogic_init()
2244 		myadapter->io_addr = probeinfo->io_addr;  in blogic_init()
2256 		if (!request_region(myadapter->io_addr, myadapter->addr_count,  in blogic_init()
2264 			release_region(myadapter->io_addr,  in blogic_init()
2273 			release_region(myadapter->io_addr,  in blogic_init()
2282 			release_region(myadapter->io_addr,  in blogic_init()
2304 			release_region(myadapter->io_addr,  in blogic_init()
2343 			release_region(myadapter->io_addr,  in blogic_init()
2345 			if (!request_region(myadapter->io_addr,  in blogic_init()
2351 					(unsigned long)myadapter->io_addr);  in blogic_init()
2428 	release_region(adapter->io_addr, adapter->addr_count);  in blogic_deladapter()