Lines Matching refs:be

5 # setting - SPI can't be modular so that case doesn't need to be covered.
300 	  driver.  Selecting this option will allow these drivers to be built
303 	  Support for the bus types used to access the codecs to be built must
304 	  be selected separately.
475 	  will be called snd-soc-adau7118-hw.
487 	  will be called snd-soc-adau7118-i2c.
646 # not select any sample rates that require MCLK to be divided by 1.5.
739 	  This driver can also be built as a module. If so, the module
740 	  will be called snd-soc-jz4740-codec.
751 	  This driver can also be built as a module. If so, the module
752 	  will be called snd-soc-jz4725b-codec.
763           This driver can also be built as a module. If so, the module
764           will be called snd-soc-jz4760-codec.
775 	  This driver can also be built as a module. If so, the module
776 	  will be called snd-soc-jz4770-codec.
1183 	bool # force RT5514_SPI to be built-in to avoid link errors
1301 	  This option is only intended to be used for tests on a device
1304 	  This mockup device could be totally virtual but could also be a
1306 	  SoundWire specification to be configured via a sideband mechanism and