• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2019 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
4  */
5 
6 #include <linux/kernel.h>
7 #include <linux/module.h>
8 #include <linux/slab.h>
9 
10 #include <drm/drm_atomic_state_helper.h>
11 #include <drm/drm_bridge.h>
12 #include <drm/drm_bridge_connector.h>
13 #include <drm/drm_connector.h>
14 #include <drm/drm_device.h>
15 #include <drm/drm_edid.h>
16 #include <drm/drm_modeset_helper_vtables.h>
17 #include <drm/drm_probe_helper.h>
18 
19 /**
20  * DOC: overview
21  *
22  * The DRM bridge connector helper object provides a DRM connector
23  * implementation that wraps a chain of &struct drm_bridge. The connector
24  * operations are fully implemented based on the operations of the bridges in
25  * the chain, and don't require any intervention from the display controller
26  * driver at runtime.
27  *
28  * To use the helper, display controller drivers create a bridge connector with
29  * a call to drm_bridge_connector_init(). This associates the newly created
30  * connector with the chain of bridges passed to the function and registers it
31  * with the DRM device. At that point the connector becomes fully usable, no
32  * further operation is needed.
33  *
34  * The DRM bridge connector operations are implemented based on the operations
35  * provided by the bridges in the chain. Each connector operation is delegated
36  * to the bridge closest to the connector (at the end of the chain) that
37  * provides the relevant functionality.
38  *
39  * To make use of this helper, all bridges in the chain shall report bridge
40  * operation flags (&drm_bridge->ops) and bridge output type
41  * (&drm_bridge->type), as well as the DRM_BRIDGE_ATTACH_NO_CONNECTOR attach
42  * flag (none of the bridges shall create a DRM connector directly).
43  */
44 
45 /**
46  * struct drm_bridge_connector - A connector backed by a chain of bridges
47  */
48 struct drm_bridge_connector {
49 	/**
50 	 * @base: The base DRM connector
51 	 */
52 	struct drm_connector base;
53 	/**
54 	 * @encoder:
55 	 *
56 	 * The encoder at the start of the bridges chain.
57 	 */
58 	struct drm_encoder *encoder;
59 	/**
60 	 * @bridge_edid:
61 	 *
62 	 * The last bridge in the chain (closest to the connector) that provides
63 	 * EDID read support, if any (see &DRM_BRIDGE_OP_EDID).
64 	 */
65 	struct drm_bridge *bridge_edid;
66 	/**
67 	 * @bridge_hpd:
68 	 *
69 	 * The last bridge in the chain (closest to the connector) that provides
70 	 * hot-plug detection notification, if any (see &DRM_BRIDGE_OP_HPD).
71 	 */
72 	struct drm_bridge *bridge_hpd;
73 	/**
74 	 * @bridge_detect:
75 	 *
76 	 * The last bridge in the chain (closest to the connector) that provides
77 	 * connector detection, if any (see &DRM_BRIDGE_OP_DETECT).
78 	 */
79 	struct drm_bridge *bridge_detect;
80 	/**
81 	 * @bridge_modes:
82 	 *
83 	 * The last bridge in the chain (closest to the connector) that provides
84 	 * connector modes detection, if any (see &DRM_BRIDGE_OP_MODES).
85 	 */
86 	struct drm_bridge *bridge_modes;
87 };
88 
89 #define to_drm_bridge_connector(x) \
90 	container_of(x, struct drm_bridge_connector, base)
91 
92 /* -----------------------------------------------------------------------------
93  * Bridge Connector Hot-Plug Handling
94  */
95 
drm_bridge_connector_hpd_notify(struct drm_connector * connector,enum drm_connector_status status)96 static void drm_bridge_connector_hpd_notify(struct drm_connector *connector,
97 					    enum drm_connector_status status)
98 {
99 	struct drm_bridge_connector *bridge_connector =
100 		to_drm_bridge_connector(connector);
101 	struct drm_bridge *bridge;
102 
103 	/* Notify all bridges in the pipeline of hotplug events. */
104 	drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge) {
105 		if (bridge->funcs->hpd_notify)
106 			bridge->funcs->hpd_notify(bridge, status);
107 	}
108 }
109 
drm_bridge_connector_hpd_cb(void * cb_data,enum drm_connector_status status)110 static void drm_bridge_connector_hpd_cb(void *cb_data,
111 					enum drm_connector_status status)
112 {
113 	struct drm_bridge_connector *drm_bridge_connector = cb_data;
114 	struct drm_connector *connector = &drm_bridge_connector->base;
115 	struct drm_device *dev = connector->dev;
116 	enum drm_connector_status old_status;
117 
118 	mutex_lock(&dev->mode_config.mutex);
119 	old_status = connector->status;
120 	connector->status = status;
121 	mutex_unlock(&dev->mode_config.mutex);
122 
123 	if (old_status == status)
124 		return;
125 
126 	drm_bridge_connector_hpd_notify(connector, status);
127 
128 	drm_kms_helper_hotplug_event(dev);
129 }
130 
131 /**
132  * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
133  * @connector: The DRM bridge connector
134  *
135  * This function enables hot-plug detection for the given bridge connector.
136  * This is typically used by display drivers in their resume handler.
137  */
drm_bridge_connector_enable_hpd(struct drm_connector * connector)138 void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
139 {
140 	struct drm_bridge_connector *bridge_connector =
141 		to_drm_bridge_connector(connector);
142 	struct drm_bridge *hpd = bridge_connector->bridge_hpd;
143 
144 	if (hpd)
145 		drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
146 				      bridge_connector);
147 }
148 EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
149 
150 /**
151  * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
152  * connector
153  * @connector: The DRM bridge connector
154  *
155  * This function disables hot-plug detection for the given bridge connector.
156  * This is typically used by display drivers in their suspend handler.
157  */
drm_bridge_connector_disable_hpd(struct drm_connector * connector)158 void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
159 {
160 	struct drm_bridge_connector *bridge_connector =
161 		to_drm_bridge_connector(connector);
162 	struct drm_bridge *hpd = bridge_connector->bridge_hpd;
163 
164 	if (hpd)
165 		drm_bridge_hpd_disable(hpd);
166 }
167 EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
168 
169 /* -----------------------------------------------------------------------------
170  * Bridge Connector Functions
171  */
172 
173 static enum drm_connector_status
drm_bridge_connector_detect(struct drm_connector * connector,bool force)174 drm_bridge_connector_detect(struct drm_connector *connector, bool force)
175 {
176 	struct drm_bridge_connector *bridge_connector =
177 		to_drm_bridge_connector(connector);
178 	struct drm_bridge *detect = bridge_connector->bridge_detect;
179 	enum drm_connector_status status;
180 
181 	if (detect) {
182 		status = detect->funcs->detect(detect);
183 
184 		drm_bridge_connector_hpd_notify(connector, status);
185 	} else {
186 		switch (connector->connector_type) {
187 		case DRM_MODE_CONNECTOR_DPI:
188 		case DRM_MODE_CONNECTOR_LVDS:
189 		case DRM_MODE_CONNECTOR_DSI:
190 		case DRM_MODE_CONNECTOR_eDP:
191 			status = connector_status_connected;
192 			break;
193 		default:
194 			status = connector_status_unknown;
195 			break;
196 		}
197 	}
198 
199 	return status;
200 }
201 
drm_bridge_connector_destroy(struct drm_connector * connector)202 static void drm_bridge_connector_destroy(struct drm_connector *connector)
203 {
204 	struct drm_bridge_connector *bridge_connector =
205 		to_drm_bridge_connector(connector);
206 
207 	if (bridge_connector->bridge_hpd) {
208 		struct drm_bridge *hpd = bridge_connector->bridge_hpd;
209 
210 		drm_bridge_hpd_disable(hpd);
211 	}
212 
213 	drm_connector_unregister(connector);
214 	drm_connector_cleanup(connector);
215 
216 	kfree(bridge_connector);
217 }
218 
219 static const struct drm_connector_funcs drm_bridge_connector_funcs = {
220 	.reset = drm_atomic_helper_connector_reset,
221 	.detect = drm_bridge_connector_detect,
222 	.fill_modes = drm_helper_probe_single_connector_modes,
223 	.destroy = drm_bridge_connector_destroy,
224 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
225 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
226 };
227 
228 /* -----------------------------------------------------------------------------
229  * Bridge Connector Helper Functions
230  */
231 
drm_bridge_connector_get_modes_edid(struct drm_connector * connector,struct drm_bridge * bridge)232 static int drm_bridge_connector_get_modes_edid(struct drm_connector *connector,
233 					       struct drm_bridge *bridge)
234 {
235 	enum drm_connector_status status;
236 	struct edid *edid;
237 	int n;
238 
239 	status = drm_bridge_connector_detect(connector, false);
240 	if (status != connector_status_connected)
241 		goto no_edid;
242 
243 	edid = bridge->funcs->get_edid(bridge, connector);
244 	if (!drm_edid_is_valid(edid)) {
245 		kfree(edid);
246 		goto no_edid;
247 	}
248 
249 	drm_connector_update_edid_property(connector, edid);
250 	n = drm_add_edid_modes(connector, edid);
251 
252 	kfree(edid);
253 	return n;
254 
255 no_edid:
256 	drm_connector_update_edid_property(connector, NULL);
257 	return 0;
258 }
259 
drm_bridge_connector_get_modes(struct drm_connector * connector)260 static int drm_bridge_connector_get_modes(struct drm_connector *connector)
261 {
262 	struct drm_bridge_connector *bridge_connector =
263 		to_drm_bridge_connector(connector);
264 	struct drm_bridge *bridge;
265 
266 	/*
267 	 * If display exposes EDID, then we parse that in the normal way to
268 	 * build table of supported modes.
269 	 */
270 	bridge = bridge_connector->bridge_edid;
271 	if (bridge)
272 		return drm_bridge_connector_get_modes_edid(connector, bridge);
273 
274 	/*
275 	 * Otherwise if the display pipeline reports modes (e.g. with a fixed
276 	 * resolution panel or an analog TV output), query it.
277 	 */
278 	bridge = bridge_connector->bridge_modes;
279 	if (bridge)
280 		return bridge->funcs->get_modes(bridge, connector);
281 
282 	/*
283 	 * We can't retrieve modes, which can happen for instance for a DVI or
284 	 * VGA output with the DDC bus unconnected. The KMS core will add the
285 	 * default modes.
286 	 */
287 	return 0;
288 }
289 
290 static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
291 	.get_modes = drm_bridge_connector_get_modes,
292 	/* No need for .mode_valid(), the bridges are checked by the core. */
293 };
294 
295 /* -----------------------------------------------------------------------------
296  * Bridge Connector Initialisation
297  */
298 
299 /**
300  * drm_bridge_connector_init - Initialise a connector for a chain of bridges
301  * @drm: the DRM device
302  * @encoder: the encoder where the bridge chain starts
303  *
304  * Allocate, initialise and register a &drm_bridge_connector with the @drm
305  * device. The connector is associated with a chain of bridges that starts at
306  * the @encoder. All bridges in the chain shall report bridge operation flags
307  * (&drm_bridge->ops) and bridge output type (&drm_bridge->type), and none of
308  * them may create a DRM connector directly.
309  *
310  * Returns a pointer to the new connector on success, or a negative error
311  * pointer otherwise.
312  */
drm_bridge_connector_init(struct drm_device * drm,struct drm_encoder * encoder)313 struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
314 						struct drm_encoder *encoder)
315 {
316 	struct drm_bridge_connector *bridge_connector;
317 	struct drm_connector *connector;
318 	struct i2c_adapter *ddc = NULL;
319 	struct drm_bridge *bridge;
320 	int connector_type;
321 
322 	bridge_connector = kzalloc(sizeof(*bridge_connector), GFP_KERNEL);
323 	if (!bridge_connector)
324 		return ERR_PTR(-ENOMEM);
325 
326 	bridge_connector->encoder = encoder;
327 
328 	/*
329 	 * TODO: Handle doublescan_allowed, stereo_allowed and
330 	 * ycbcr_420_allowed.
331 	 */
332 	connector = &bridge_connector->base;
333 	connector->interlace_allowed = true;
334 
335 	/*
336 	 * Initialise connector status handling. First locate the furthest
337 	 * bridges in the pipeline that support HPD and output detection. Then
338 	 * initialise the connector polling mode, using HPD if available and
339 	 * falling back to polling if supported. If neither HPD nor output
340 	 * detection are available, we don't support hotplug detection at all.
341 	 */
342 	connector_type = DRM_MODE_CONNECTOR_Unknown;
343 	drm_for_each_bridge_in_chain(encoder, bridge) {
344 		if (!bridge->interlace_allowed)
345 			connector->interlace_allowed = false;
346 
347 		if (bridge->ops & DRM_BRIDGE_OP_EDID)
348 			bridge_connector->bridge_edid = bridge;
349 		if (bridge->ops & DRM_BRIDGE_OP_HPD)
350 			bridge_connector->bridge_hpd = bridge;
351 		if (bridge->ops & DRM_BRIDGE_OP_DETECT)
352 			bridge_connector->bridge_detect = bridge;
353 		if (bridge->ops & DRM_BRIDGE_OP_MODES)
354 			bridge_connector->bridge_modes = bridge;
355 
356 		if (!drm_bridge_get_next_bridge(bridge))
357 			connector_type = bridge->type;
358 
359 		if (bridge->ddc)
360 			ddc = bridge->ddc;
361 	}
362 
363 	if (connector_type == DRM_MODE_CONNECTOR_Unknown) {
364 		kfree(bridge_connector);
365 		return ERR_PTR(-EINVAL);
366 	}
367 
368 	drm_connector_init_with_ddc(drm, connector, &drm_bridge_connector_funcs,
369 				    connector_type, ddc);
370 	drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs);
371 
372 	if (bridge_connector->bridge_hpd) {
373 		connector->polled = DRM_CONNECTOR_POLL_HPD;
374 		drm_bridge_connector_enable_hpd(connector);
375 	}
376 	else if (bridge_connector->bridge_detect)
377 		connector->polled = DRM_CONNECTOR_POLL_CONNECT
378 				  | DRM_CONNECTOR_POLL_DISCONNECT;
379 
380 	return connector;
381 }
382 EXPORT_SYMBOL_GPL(drm_bridge_connector_init);
383