1 /* SPDX-License-Identifier: GPL-2.0 */
2
3 #ifndef _ASM_X86_NOSPEC_BRANCH_H_
4 #define _ASM_X86_NOSPEC_BRANCH_H_
5
6 #include <linux/static_key.h>
7 #include <linux/objtool.h>
8 #include <linux/linkage.h>
9
10 #include <asm/alternative.h>
11 #include <asm/cpufeatures.h>
12 #include <asm/msr-index.h>
13 #include <asm/unwind_hints.h>
14 #include <asm/percpu.h>
15
16 #define RETPOLINE_THUNK_SIZE 32
17
18 /*
19 * Fill the CPU return stack buffer.
20 *
21 * Each entry in the RSB, if used for a speculative 'ret', contains an
22 * infinite 'pause; lfence; jmp' loop to capture speculative execution.
23 *
24 * This is required in various cases for retpoline and IBRS-based
25 * mitigations for the Spectre variant 2 vulnerability. Sometimes to
26 * eliminate potentially bogus entries from the RSB, and sometimes
27 * purely to ensure that it doesn't get empty, which on some CPUs would
28 * allow predictions from other (unwanted!) sources to be used.
29 *
30 * We define a CPP macro such that it can be used from both .S files and
31 * inline assembly. It's possible to do a .macro and then include that
32 * from C via asm(".include <asm/nospec-branch.h>") but let's not go there.
33 */
34
35 #define RSB_CLEAR_LOOPS 32 /* To forcibly overwrite all entries */
36
37 /*
38 * Common helper for __FILL_RETURN_BUFFER and __FILL_ONE_RETURN.
39 */
40 #define __FILL_RETURN_SLOT \
41 ANNOTATE_INTRA_FUNCTION_CALL; \
42 call 772f; \
43 int3; \
44 772:
45
46 /*
47 * Stuff the entire RSB.
48 *
49 * Google experimented with loop-unrolling and this turned out to be
50 * the optimal version - two calls, each with their own speculation
51 * trap should their return address end up getting used, in a loop.
52 */
53 #ifdef CONFIG_X86_64
54 #define __FILL_RETURN_BUFFER(reg, nr) \
55 mov $(nr/2), reg; \
56 771: \
57 __FILL_RETURN_SLOT \
58 __FILL_RETURN_SLOT \
59 add $(BITS_PER_LONG/8) * 2, %_ASM_SP; \
60 dec reg; \
61 jnz 771b; \
62 /* barrier for jnz misprediction */ \
63 lfence;
64 #else
65 /*
66 * i386 doesn't unconditionally have LFENCE, as such it can't
67 * do a loop.
68 */
69 #define __FILL_RETURN_BUFFER(reg, nr) \
70 .rept nr; \
71 __FILL_RETURN_SLOT; \
72 .endr; \
73 add $(BITS_PER_LONG/8) * nr, %_ASM_SP;
74 #endif
75
76 /*
77 * Stuff a single RSB slot.
78 *
79 * To mitigate Post-Barrier RSB speculation, one CALL instruction must be
80 * forced to retire before letting a RET instruction execute.
81 *
82 * On PBRSB-vulnerable CPUs, it is not safe for a RET to be executed
83 * before this point.
84 */
85 #define __FILL_ONE_RETURN \
86 __FILL_RETURN_SLOT \
87 add $(BITS_PER_LONG/8), %_ASM_SP; \
88 lfence;
89
90 #ifdef __ASSEMBLY__
91
92 /*
93 * This should be used immediately before an indirect jump/call. It tells
94 * objtool the subsequent indirect jump/call is vouched safe for retpoline
95 * builds.
96 */
97 .macro ANNOTATE_RETPOLINE_SAFE
98 .Lannotate_\@:
99 .pushsection .discard.retpoline_safe
100 _ASM_PTR .Lannotate_\@
101 .popsection
102 .endm
103
104 /*
105 * (ab)use RETPOLINE_SAFE on RET to annotate away 'bare' RET instructions
106 * vs RETBleed validation.
107 */
108 #define ANNOTATE_UNRET_SAFE ANNOTATE_RETPOLINE_SAFE
109
110 /*
111 * Abuse ANNOTATE_RETPOLINE_SAFE on a NOP to indicate UNRET_END, should
112 * eventually turn into it's own annotation.
113 */
114 .macro ANNOTATE_UNRET_END
115 #if (defined(CONFIG_CPU_UNRET_ENTRY) || defined(CONFIG_CPU_SRSO))
116 ANNOTATE_RETPOLINE_SAFE
117 nop
118 #endif
119 .endm
120
121 /*
122 * JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
123 * indirect jmp/call which may be susceptible to the Spectre variant 2
124 * attack.
125 */
126 .macro JMP_NOSPEC reg:req
127 #ifdef CONFIG_RETPOLINE
128 ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
129 __stringify(jmp __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
130 __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_LFENCE
131 #else
132 jmp *%\reg
133 #endif
134 .endm
135
136 .macro CALL_NOSPEC reg:req
137 #ifdef CONFIG_RETPOLINE
138 ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg), \
139 __stringify(call __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
140 __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_LFENCE
141 #else
142 call *%\reg
143 #endif
144 .endm
145
146 /*
147 * A simpler FILL_RETURN_BUFFER macro. Don't make people use the CPP
148 * monstrosity above, manually.
149 */
150 .macro FILL_RETURN_BUFFER reg:req nr:req ftr:req ftr2=ALT_NOT(X86_FEATURE_ALWAYS)
151 ALTERNATIVE_2 "jmp .Lskip_rsb_\@", \
152 __stringify(__FILL_RETURN_BUFFER(\reg,\nr)), \ftr, \
153 __stringify(__FILL_ONE_RETURN), \ftr2
154
155 .Lskip_rsb_\@:
156 .endm
157
158 #ifdef CONFIG_CPU_UNRET_ENTRY
159 #define CALL_UNTRAIN_RET "call entry_untrain_ret"
160 #else
161 #define CALL_UNTRAIN_RET ""
162 #endif
163
164 /*
165 * Mitigate RETBleed for AMD/Hygon Zen uarch. Requires KERNEL CR3 because the
166 * return thunk isn't mapped into the userspace tables (then again, AMD
167 * typically has NO_MELTDOWN).
168 *
169 * While retbleed_untrain_ret() doesn't clobber anything but requires stack,
170 * entry_ibpb() will clobber AX, CX, DX.
171 *
172 * As such, this must be placed after every *SWITCH_TO_KERNEL_CR3 at a point
173 * where we have a stack but before any RET instruction.
174 */
175 .macro UNTRAIN_RET
176 #if defined(CONFIG_CPU_UNRET_ENTRY) || defined(CONFIG_CPU_IBPB_ENTRY) || \
177 defined(CONFIG_CPU_SRSO)
178 ANNOTATE_UNRET_END
179 ALTERNATIVE_2 "", \
180 CALL_UNTRAIN_RET, X86_FEATURE_UNRET, \
181 "call entry_ibpb", X86_FEATURE_ENTRY_IBPB
182 #endif
183 .endm
184
185 #else /* __ASSEMBLY__ */
186
187 #define ANNOTATE_RETPOLINE_SAFE \
188 "999:\n\t" \
189 ".pushsection .discard.retpoline_safe\n\t" \
190 _ASM_PTR " 999b\n\t" \
191 ".popsection\n\t"
192
193 #ifdef CONFIG_RETHUNK
194 extern void __x86_return_thunk(void);
195 #else
__x86_return_thunk(void)196 static inline void __x86_return_thunk(void) {}
197 #endif
198
199 extern void retbleed_return_thunk(void);
200 extern void srso_return_thunk(void);
201 extern void srso_alias_return_thunk(void);
202
203 extern void retbleed_untrain_ret(void);
204 extern void srso_untrain_ret(void);
205 extern void srso_alias_untrain_ret(void);
206
207 extern void entry_untrain_ret(void);
208 extern void entry_ibpb(void);
209
210 #ifdef CONFIG_RETPOLINE
211
212 typedef u8 retpoline_thunk_t[RETPOLINE_THUNK_SIZE];
213
214 #define GEN(reg) \
215 extern retpoline_thunk_t __x86_indirect_thunk_ ## reg;
216 #include <asm/GEN-for-each-reg.h>
217 #undef GEN
218
219 extern retpoline_thunk_t __x86_indirect_thunk_array[];
220
221 #ifdef CONFIG_X86_64
222
223 /*
224 * Inline asm uses the %V modifier which is only in newer GCC
225 * which is ensured when CONFIG_RETPOLINE is defined.
226 */
227 # define CALL_NOSPEC \
228 ALTERNATIVE_2( \
229 ANNOTATE_RETPOLINE_SAFE \
230 "call *%[thunk_target]\n", \
231 "call __x86_indirect_thunk_%V[thunk_target]\n", \
232 X86_FEATURE_RETPOLINE, \
233 "lfence;\n" \
234 ANNOTATE_RETPOLINE_SAFE \
235 "call *%[thunk_target]\n", \
236 X86_FEATURE_RETPOLINE_LFENCE)
237
238 # define THUNK_TARGET(addr) [thunk_target] "r" (addr)
239
240 #else /* CONFIG_X86_32 */
241 /*
242 * For i386 we use the original ret-equivalent retpoline, because
243 * otherwise we'll run out of registers. We don't care about CET
244 * here, anyway.
245 */
246 # define CALL_NOSPEC \
247 ALTERNATIVE_2( \
248 ANNOTATE_RETPOLINE_SAFE \
249 "call *%[thunk_target]\n", \
250 " jmp 904f;\n" \
251 " .align 16\n" \
252 "901: call 903f;\n" \
253 "902: pause;\n" \
254 " lfence;\n" \
255 " jmp 902b;\n" \
256 " .align 16\n" \
257 "903: lea 4(%%esp), %%esp;\n" \
258 " pushl %[thunk_target];\n" \
259 " ret;\n" \
260 " .align 16\n" \
261 "904: call 901b;\n", \
262 X86_FEATURE_RETPOLINE, \
263 "lfence;\n" \
264 ANNOTATE_RETPOLINE_SAFE \
265 "call *%[thunk_target]\n", \
266 X86_FEATURE_RETPOLINE_LFENCE)
267
268 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
269 #endif
270 #else /* No retpoline for C / inline asm */
271 # define CALL_NOSPEC "call *%[thunk_target]\n"
272 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
273 #endif
274
275 /* The Spectre V2 mitigation variants */
276 enum spectre_v2_mitigation {
277 SPECTRE_V2_NONE,
278 SPECTRE_V2_RETPOLINE,
279 SPECTRE_V2_LFENCE,
280 SPECTRE_V2_EIBRS,
281 SPECTRE_V2_EIBRS_RETPOLINE,
282 SPECTRE_V2_EIBRS_LFENCE,
283 SPECTRE_V2_IBRS,
284 };
285
286 /* The indirect branch speculation control variants */
287 enum spectre_v2_user_mitigation {
288 SPECTRE_V2_USER_NONE,
289 SPECTRE_V2_USER_STRICT,
290 SPECTRE_V2_USER_STRICT_PREFERRED,
291 SPECTRE_V2_USER_PRCTL,
292 SPECTRE_V2_USER_SECCOMP,
293 };
294
295 /* The Speculative Store Bypass disable variants */
296 enum ssb_mitigation {
297 SPEC_STORE_BYPASS_NONE,
298 SPEC_STORE_BYPASS_DISABLE,
299 SPEC_STORE_BYPASS_PRCTL,
300 SPEC_STORE_BYPASS_SECCOMP,
301 };
302
303 extern char __indirect_thunk_start[];
304 extern char __indirect_thunk_end[];
305
306 static __always_inline
alternative_msr_write(unsigned int msr,u64 val,unsigned int feature)307 void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
308 {
309 asm volatile(ALTERNATIVE("", "wrmsr", %c[feature])
310 : : "c" (msr),
311 "a" ((u32)val),
312 "d" ((u32)(val >> 32)),
313 [feature] "i" (feature)
314 : "memory");
315 }
316
317 extern u64 x86_pred_cmd;
318
indirect_branch_prediction_barrier(void)319 static inline void indirect_branch_prediction_barrier(void)
320 {
321 alternative_msr_write(MSR_IA32_PRED_CMD, x86_pred_cmd, X86_FEATURE_USE_IBPB);
322 }
323
324 /* The Intel SPEC CTRL MSR base value cache */
325 extern u64 x86_spec_ctrl_base;
326 DECLARE_PER_CPU(u64, x86_spec_ctrl_current);
327 extern void update_spec_ctrl_cond(u64 val);
328 extern u64 spec_ctrl_current(void);
329
330 /*
331 * With retpoline, we must use IBRS to restrict branch prediction
332 * before calling into firmware.
333 *
334 * (Implemented as CPP macros due to header hell.)
335 */
336 #define firmware_restrict_branch_speculation_start() \
337 do { \
338 preempt_disable(); \
339 alternative_msr_write(MSR_IA32_SPEC_CTRL, \
340 spec_ctrl_current() | SPEC_CTRL_IBRS, \
341 X86_FEATURE_USE_IBRS_FW); \
342 alternative_msr_write(MSR_IA32_PRED_CMD, PRED_CMD_IBPB, \
343 X86_FEATURE_USE_IBPB_FW); \
344 } while (0)
345
346 #define firmware_restrict_branch_speculation_end() \
347 do { \
348 alternative_msr_write(MSR_IA32_SPEC_CTRL, \
349 spec_ctrl_current(), \
350 X86_FEATURE_USE_IBRS_FW); \
351 preempt_enable(); \
352 } while (0)
353
354 DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
355 DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
356 DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
357
358 DECLARE_STATIC_KEY_FALSE(mds_user_clear);
359 DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
360
361 DECLARE_STATIC_KEY_FALSE(switch_mm_cond_l1d_flush);
362
363 DECLARE_STATIC_KEY_FALSE(mmio_stale_data_clear);
364
365 #include <asm/segment.h>
366
367 /**
368 * mds_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
369 *
370 * This uses the otherwise unused and obsolete VERW instruction in
371 * combination with microcode which triggers a CPU buffer flush when the
372 * instruction is executed.
373 */
mds_clear_cpu_buffers(void)374 static __always_inline void mds_clear_cpu_buffers(void)
375 {
376 static const u16 ds = __KERNEL_DS;
377
378 /*
379 * Has to be the memory-operand variant because only that
380 * guarantees the CPU buffer flush functionality according to
381 * documentation. The register-operand variant does not.
382 * Works with any segment selector, but a valid writable
383 * data segment is the fastest variant.
384 *
385 * "cc" clobber is required because VERW modifies ZF.
386 */
387 asm volatile("verw %[ds]" : : [ds] "m" (ds) : "cc");
388 }
389
390 /**
391 * mds_user_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
392 *
393 * Clear CPU buffers if the corresponding static key is enabled
394 */
mds_user_clear_cpu_buffers(void)395 static __always_inline void mds_user_clear_cpu_buffers(void)
396 {
397 if (static_branch_likely(&mds_user_clear))
398 mds_clear_cpu_buffers();
399 }
400
401 /**
402 * mds_idle_clear_cpu_buffers - Mitigation for MDS vulnerability
403 *
404 * Clear CPU buffers if the corresponding static key is enabled
405 */
mds_idle_clear_cpu_buffers(void)406 static inline void mds_idle_clear_cpu_buffers(void)
407 {
408 if (static_branch_likely(&mds_idle_clear))
409 mds_clear_cpu_buffers();
410 }
411
412 #endif /* __ASSEMBLY__ */
413
414 #endif /* _ASM_X86_NOSPEC_BRANCH_H_ */
415