# SPDX-License-Identifier: GPL-2.0 # # Generic algorithms support # config XOR_BLOCKS tristate # # async_tx api: hardware offloaded memory transfer/transform support # source "crypto/async_tx/Kconfig" # # Cryptographic API Configuration # menuconfig CRYPTO tristate "Cryptographic API" select LIB_MEMNEQ help This option provides the core Cryptographic API. if CRYPTO comment "Crypto core or helper" config CRYPTO_FIPS bool "FIPS 200 compliance" depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS depends on (MODULE_SIG || !MODULES) help This option enables the fips boot option which is required if you want the system to operate in a FIPS 200 certification. You should say no unless you know what this is. config CRYPTO_FIPS140_MOD tristate "Enable FIPS 140 cryptographic module" depends on ARM64 && ARM64_MODULE_PLTS depends on m help This option enables building a loadable module fips140.ko, which contains various crypto algorithms that are also built into vmlinux. At load time, this module overrides the built-in implementations of these algorithms with its implementations. It also runs self-tests on these algorithms and verifies the integrity of its code and data. If either of these steps fails, the kernel will panic. This module is intended to be loaded at early boot time in order to meet FIPS 140 and NIAP FPT_TST_EXT.1 requirements. It shouldn't be used if you don't need to meet these requirements. config CRYPTO_FIPS140_MOD_EVAL_TESTING bool "Enable evaluation testing features in FIPS 140 module" depends on CRYPTO_FIPS140_MOD help This option adds some features to the FIPS 140 module which are needed for lab evaluation testing of the module, e.g. support for injecting errors and support for a userspace interface to some of the module's services. This option should not be enabled in production builds. config CRYPTO_FIPS140_MOD_DEBUG_INTEGRITY_CHECK bool "Debug the integrity check in FIPS 140 module" depends on CRYPTO_FIPS140_MOD help This option makes the FIPS 140 module provide debugfs files containing the text and rodata that were used for the integrity check, i.e. the runtime text and rodata with relocations and code patches unapplied. This option also makes the module load even if the integrity check fails so that these files can be used to debug the failure. (A possible failure mode is that the kernel has added a new type of code patching and the module needs to be updated to disable or unapply it.) This option must not be enabled in production builds. Example commands for debugging an integrity check failure: adb root adb shell mount debugfs -t debugfs /sys/kernel/debug adb shell cp /sys/kernel/debug/fips140/{text,rodata} /data/local/tmp/ adb pull /data/local/tmp/text text.checked adb pull /data/local/tmp/rodata rodata.checked llvm-objcopy -O binary --only-section=.text fips140.ko text.orig llvm-objcopy -O binary --only-section=.rodata fips140.ko rodata.orig for f in {text,rodata}.{orig,checked}; do xxd -g1 $f > $f.xxd; done vimdiff text.{orig,checked}.xxd vimdiff rodata.{orig,checked}.xxd config CRYPTO_ALGAPI tristate select CRYPTO_ALGAPI2 help This option provides the API for cryptographic algorithms. config CRYPTO_ALGAPI2 tristate config CRYPTO_AEAD tristate select CRYPTO_AEAD2 select CRYPTO_ALGAPI config CRYPTO_AEAD2 tristate select CRYPTO_ALGAPI2 select CRYPTO_NULL2 select CRYPTO_RNG2 config CRYPTO_SKCIPHER tristate select CRYPTO_SKCIPHER2 select CRYPTO_ALGAPI config CRYPTO_SKCIPHER2 tristate select CRYPTO_ALGAPI2 select CRYPTO_RNG2 config CRYPTO_HASH tristate select CRYPTO_HASH2 select CRYPTO_ALGAPI config CRYPTO_HASH2 tristate select CRYPTO_ALGAPI2 config CRYPTO_RNG tristate select CRYPTO_RNG2 select CRYPTO_ALGAPI config CRYPTO_RNG2 tristate select CRYPTO_ALGAPI2 config CRYPTO_RNG_DEFAULT tristate select CRYPTO_DRBG_MENU config CRYPTO_AKCIPHER2 tristate select CRYPTO_ALGAPI2 config CRYPTO_AKCIPHER tristate select CRYPTO_AKCIPHER2 select CRYPTO_ALGAPI config CRYPTO_KPP2 tristate select CRYPTO_ALGAPI2 config CRYPTO_KPP tristate select CRYPTO_ALGAPI select CRYPTO_KPP2 config CRYPTO_ACOMP2 tristate select CRYPTO_ALGAPI2 select SGL_ALLOC config CRYPTO_ACOMP tristate select CRYPTO_ALGAPI select CRYPTO_ACOMP2 config CRYPTO_MANAGER tristate "Cryptographic algorithm manager" select CRYPTO_MANAGER2 help Create default cryptographic template instantiations such as cbc(aes). config CRYPTO_MANAGER2 def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y) select CRYPTO_AEAD2 select CRYPTO_HASH2 select CRYPTO_SKCIPHER2 select CRYPTO_AKCIPHER2 select CRYPTO_KPP2 select CRYPTO_ACOMP2 config CRYPTO_USER tristate "Userspace cryptographic algorithm configuration" depends on NET select CRYPTO_MANAGER help Userspace configuration for cryptographic instantiations such as cbc(aes). config CRYPTO_MANAGER_DISABLE_TESTS bool "Disable run-time self tests" default y help Disable run-time self tests that normally take place at algorithm registration. config CRYPTO_MANAGER_EXTRA_TESTS bool "Enable extra run-time crypto self tests" depends on DEBUG_KERNEL && !CRYPTO_MANAGER_DISABLE_TESTS && CRYPTO_MANAGER help Enable extra run-time self tests of registered crypto algorithms, including randomized fuzz tests. This is intended for developer use only, as these tests take much longer to run than the normal self tests. config CRYPTO_GF128MUL tristate config CRYPTO_NULL tristate "Null algorithms" select CRYPTO_NULL2 help These are 'Null' algorithms, used by IPsec, which do nothing. config CRYPTO_NULL2 tristate select CRYPTO_ALGAPI2 select CRYPTO_SKCIPHER2 select CRYPTO_HASH2 config CRYPTO_PCRYPT tristate "Parallel crypto engine" depends on SMP select PADATA select CRYPTO_MANAGER select CRYPTO_AEAD help This converts an arbitrary crypto algorithm into a parallel algorithm that executes in kernel threads. config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_SKCIPHER select CRYPTO_HASH select CRYPTO_MANAGER help This is a generic software asynchronous crypto daemon that converts an arbitrary synchronous software crypto algorithm into an asynchronous algorithm that executes in a kernel thread. config CRYPTO_AUTHENC tristate "Authenc support" select CRYPTO_AEAD select CRYPTO_SKCIPHER select CRYPTO_MANAGER select CRYPTO_HASH select CRYPTO_NULL help Authenc: Combined mode wrapper for IPsec. This is required for IPSec. config CRYPTO_TEST tristate "Testing module" depends on m || EXPERT select CRYPTO_MANAGER help Quick & dirty crypto test module. config CRYPTO_SIMD tristate select CRYPTO_CRYPTD config CRYPTO_ENGINE tristate comment "Public-key cryptography" config CRYPTO_RSA tristate "RSA algorithm" select CRYPTO_AKCIPHER select CRYPTO_MANAGER select MPILIB select ASN1 help Generic implementation of the RSA public key algorithm. config CRYPTO_DH tristate "Diffie-Hellman algorithm" select CRYPTO_KPP select MPILIB help Generic implementation of the Diffie-Hellman algorithm. config CRYPTO_ECC tristate select CRYPTO_RNG_DEFAULT config CRYPTO_ECDH tristate "ECDH algorithm" select CRYPTO_ECC select CRYPTO_KPP help Generic implementation of the ECDH algorithm config CRYPTO_ECDSA tristate "ECDSA (NIST P192, P256 etc.) algorithm" select CRYPTO_ECC select CRYPTO_AKCIPHER select ASN1 help Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.) is A NIST cryptographic standard algorithm. Only signature verification is implemented. config CRYPTO_ECRDSA tristate "EC-RDSA (GOST 34.10) algorithm" select CRYPTO_ECC select CRYPTO_AKCIPHER select CRYPTO_STREEBOG select OID_REGISTRY select ASN1 help Elliptic Curve Russian Digital Signature Algorithm (GOST R 34.10-2012, RFC 7091, ISO/IEC 14888-3:2018) is one of the Russian cryptographic standard algorithms (called GOST algorithms). Only signature verification is implemented. config CRYPTO_SM2 tristate "SM2 algorithm" select CRYPTO_SM3 select CRYPTO_AKCIPHER select CRYPTO_MANAGER select MPILIB select ASN1 help Generic implementation of the SM2 public key algorithm. It was published by State Encryption Management Bureau, China. as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012. References: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02 http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml http://www.gmbz.org.cn/main/bzlb.html config CRYPTO_CURVE25519 tristate "Curve25519 algorithm" select CRYPTO_KPP select CRYPTO_LIB_CURVE25519_GENERIC config CRYPTO_CURVE25519_X86 tristate "x86_64 accelerated Curve25519 scalar multiplication library" depends on X86 && 64BIT select CRYPTO_LIB_CURVE25519_GENERIC select CRYPTO_ARCH_HAVE_LIB_CURVE25519 comment "Authenticated Encryption with Associated Data" config CRYPTO_CCM tristate "CCM support" select CRYPTO_CTR select CRYPTO_HASH select CRYPTO_AEAD select CRYPTO_MANAGER help Support for Counter with CBC MAC. Required for IPsec. config CRYPTO_GCM tristate "GCM/GMAC support" select CRYPTO_CTR select CRYPTO_AEAD select CRYPTO_GHASH select CRYPTO_NULL select CRYPTO_MANAGER help Support for Galois/Counter Mode (GCM) and Galois Message Authentication Code (GMAC). Required for IPSec. config CRYPTO_CHACHA20POLY1305 tristate "ChaCha20-Poly1305 AEAD support" select CRYPTO_CHACHA20 select CRYPTO_POLY1305 select CRYPTO_AEAD select CRYPTO_MANAGER help ChaCha20-Poly1305 AEAD support, RFC7539. Support for the AEAD wrapper using the ChaCha20 stream cipher combined with the Poly1305 authenticator. It is defined in RFC7539 for use in IETF protocols. config CRYPTO_AEGIS128 tristate "AEGIS-128 AEAD algorithm" select CRYPTO_AEAD select CRYPTO_AES # for AES S-box tables help Support for the AEGIS-128 dedicated AEAD algorithm. config CRYPTO_AEGIS128_SIMD bool "Support SIMD acceleration for AEGIS-128" depends on CRYPTO_AEGIS128 && ((ARM || ARM64) && KERNEL_MODE_NEON) default y config CRYPTO_AEGIS128_AESNI_SSE2 tristate "AEGIS-128 AEAD algorithm (x86_64 AESNI+SSE2 implementation)" depends on X86 && 64BIT select CRYPTO_AEAD select CRYPTO_SIMD help AESNI+SSE2 implementation of the AEGIS-128 dedicated AEAD algorithm. config CRYPTO_SEQIV tristate "Sequence Number IV Generator" select CRYPTO_AEAD select CRYPTO_SKCIPHER select CRYPTO_NULL select CRYPTO_RNG_DEFAULT select CRYPTO_MANAGER help This IV generator generates an IV based on a sequence number by xoring it with a salt. This algorithm is mainly useful for CTR config CRYPTO_ECHAINIV tristate "Encrypted Chain IV Generator" select CRYPTO_AEAD select CRYPTO_NULL select CRYPTO_RNG_DEFAULT select CRYPTO_MANAGER help This IV generator generates an IV based on the encryption of a sequence number xored with a salt. This is the default algorithm for CBC. comment "Block modes" config CRYPTO_CBC tristate "CBC support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help CBC: Cipher Block Chaining mode This block cipher algorithm is required for IPSec. config CRYPTO_CFB tristate "CFB support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help CFB: Cipher FeedBack mode This block cipher algorithm is required for TPM2 Cryptography. config CRYPTO_CTR tristate "CTR support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help CTR: Counter mode This block cipher algorithm is required for IPSec. config CRYPTO_CTS tristate "CTS support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help CTS: Cipher Text Stealing This is the Cipher Text Stealing mode as described by Section 8 of rfc2040 and referenced by rfc3962 (rfc3962 includes errata information in its Appendix A) or CBC-CS3 as defined by NIST in Sp800-38A addendum from Oct 2010. This mode is required for Kerberos gss mechanism support for AES encryption. See: https://csrc.nist.gov/publications/detail/sp/800-38a/addendum/final config CRYPTO_ECB tristate "ECB support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help ECB: Electronic CodeBook mode This is the simplest block cipher algorithm. It simply encrypts the input block by block. config CRYPTO_LRW tristate "LRW support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER select CRYPTO_GF128MUL help LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable narrow block cipher mode for dm-crypt. Use it with cipher specification string aes-lrw-benbi, the key must be 256, 320 or 384. The first 128, 192 or 256 bits in the key are used for AES and the rest is used to tie each cipher block to its logical position. config CRYPTO_OFB tristate "OFB support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help OFB: the Output Feedback mode makes a block cipher into a synchronous stream cipher. It generates keystream blocks, which are then XORed with the plaintext blocks to get the ciphertext. Flipping a bit in the ciphertext produces a flipped bit in the plaintext at the same location. This property allows many error correcting codes to function normally even when applied before encryption. config CRYPTO_PCBC tristate "PCBC support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help PCBC: Propagating Cipher Block Chaining mode This block cipher algorithm is required for RxRPC. config CRYPTO_XCTR tristate select CRYPTO_SKCIPHER select CRYPTO_MANAGER help XCTR: XOR Counter mode. This blockcipher mode is a variant of CTR mode using XORs and little-endian addition rather than big-endian arithmetic. XCTR mode is used to implement HCTR2. config CRYPTO_XTS tristate "XTS support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER select CRYPTO_ECB help XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain, key size 256, 384 or 512 bits. This implementation currently can't handle a sectorsize which is not a multiple of 16 bytes. config CRYPTO_KEYWRAP tristate "Key wrapping support" select CRYPTO_SKCIPHER select CRYPTO_MANAGER help Support for key wrapping (NIST SP800-38F / RFC3394) without padding. config CRYPTO_NHPOLY1305 tristate select CRYPTO_HASH select CRYPTO_LIB_POLY1305_GENERIC config CRYPTO_NHPOLY1305_SSE2 tristate "NHPoly1305 hash function (x86_64 SSE2 implementation)" depends on X86 && 64BIT select CRYPTO_NHPOLY1305 help SSE2 optimized implementation of the hash function used by the Adiantum encryption mode. config CRYPTO_NHPOLY1305_AVX2 tristate "NHPoly1305 hash function (x86_64 AVX2 implementation)" depends on X86 && 64BIT select CRYPTO_NHPOLY1305 help AVX2 optimized implementation of the hash function used by the Adiantum encryption mode. config CRYPTO_ADIANTUM tristate "Adiantum support" select CRYPTO_CHACHA20 select CRYPTO_LIB_POLY1305_GENERIC select CRYPTO_NHPOLY1305 select CRYPTO_MANAGER help Adiantum is a tweakable, length-preserving encryption mode designed for fast and secure disk encryption, especially on CPUs without dedicated crypto instructions. It encrypts each sector using the XChaCha12 stream cipher, two passes of an ε-almost-∆-universal hash function, and an invocation of the AES-256 block cipher on a single 16-byte block. On CPUs without AES instructions, Adiantum is much faster than AES-XTS. Adiantum's security is provably reducible to that of its underlying stream and block ciphers, subject to a security bound. Unlike XTS, Adiantum is a true wide-block encryption mode, so it actually provides an even stronger notion of security than XTS, subject to the security bound. If unsure, say N. config CRYPTO_HCTR2 tristate "HCTR2 support" select CRYPTO_XCTR select CRYPTO_POLYVAL select CRYPTO_MANAGER help HCTR2 is a length-preserving encryption mode for storage encryption that is efficient on processors with instructions to accelerate AES and carryless multiplication, e.g. x86 processors with AES-NI and CLMUL, and ARM processors with the ARMv8 crypto extensions. config CRYPTO_ESSIV tristate "ESSIV support for block encryption" select CRYPTO_AUTHENC help Encrypted salt-sector initialization vector (ESSIV) is an IV generation method that is used in some cases by fscrypt and/or dm-crypt. It uses the hash of the block encryption key as the symmetric key for a block encryption pass applied to the input IV, making low entropy IV sources more suitable for block encryption. This driver implements a crypto API template that can be instantiated either as an skcipher or as an AEAD (depending on the type of the first template argument), and which defers encryption and decryption requests to the encapsulated cipher after applying ESSIV to the input IV. Note that in the AEAD case, it is assumed that the keys are presented in the same format used by the authenc template, and that the IV appears at the end of the authenticated associated data (AAD) region (which is how dm-crypt uses it.) Note that the use of ESSIV is not recommended for new deployments, and so this only needs to be enabled when interoperability with existing encrypted volumes of filesystems is required, or when building for a particular system that requires it (e.g., when the SoC in question has accelerated CBC but not XTS, making CBC combined with ESSIV the only feasible mode for h/w accelerated block encryption) comment "Hash modes" config CRYPTO_CMAC tristate "CMAC support" select CRYPTO_HASH select CRYPTO_MANAGER help Cipher-based Message Authentication Code (CMAC) specified by The National Institute of Standards and Technology (NIST). https://tools.ietf.org/html/rfc4493 http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf config CRYPTO_HMAC tristate "HMAC support" select CRYPTO_HASH select CRYPTO_MANAGER help HMAC: Keyed-Hashing for Message Authentication (RFC2104). This is required for IPSec. config CRYPTO_XCBC tristate "XCBC support" select CRYPTO_HASH select CRYPTO_MANAGER help XCBC: Keyed-Hashing with encryption algorithm https://www.ietf.org/rfc/rfc3566.txt http://csrc.nist.gov/encryption/modes/proposedmodes/ xcbc-mac/xcbc-mac-spec.pdf config CRYPTO_VMAC tristate "VMAC support" select CRYPTO_HASH select CRYPTO_MANAGER help VMAC is a message authentication algorithm designed for very high speed on 64-bit architectures. See also: comment "Digest" config CRYPTO_CRC32C tristate "CRC32c CRC algorithm" select CRYPTO_HASH select CRC32 help Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used by iSCSI for header and data digests and by others. See Castagnoli93. Module will be crc32c. config CRYPTO_CRC32C_INTEL tristate "CRC32c INTEL hardware acceleration" depends on X86 select CRYPTO_HASH help In Intel processor with SSE4.2 supported, the processor will support CRC32C implementation using hardware accelerated CRC32 instruction. This option will create 'crc32c-intel' module, which will enable any routine to use the CRC32 instruction to gain performance compared with software implementation. Module will be crc32c-intel. config CRYPTO_CRC32C_VPMSUM tristate "CRC32c CRC algorithm (powerpc64)" depends on PPC64 && ALTIVEC select CRYPTO_HASH select CRC32 help CRC32c algorithm implemented using vector polynomial multiply-sum (vpmsum) instructions, introduced in POWER8. Enable on POWER8 and newer processors for improved performance. config CRYPTO_CRC32C_SPARC64 tristate "CRC32c CRC algorithm (SPARC64)" depends on SPARC64 select CRYPTO_HASH select CRC32 help CRC32c CRC algorithm implemented using sparc64 crypto instructions, when available. config CRYPTO_CRC32 tristate "CRC32 CRC algorithm" select CRYPTO_HASH select CRC32 help CRC-32-IEEE 802.3 cyclic redundancy-check algorithm. Shash crypto api wrappers to crc32_le function. config CRYPTO_CRC32_PCLMUL tristate "CRC32 PCLMULQDQ hardware acceleration" depends on X86 select CRYPTO_HASH select CRC32 help From Intel Westmere and AMD Bulldozer processor with SSE4.2 and PCLMULQDQ supported, the processor will support CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ instruction. This option will create 'crc32-pclmul' module, which will enable any routine to use the CRC-32-IEEE 802.3 checksum and gain better performance as compared with the table implementation. config CRYPTO_CRC32_MIPS tristate "CRC32c and CRC32 CRC algorithm (MIPS)" depends on MIPS_CRC_SUPPORT select CRYPTO_HASH help CRC32c and CRC32 CRC algorithms implemented using mips crypto instructions, when available. config CRYPTO_XXHASH tristate "xxHash hash algorithm" select CRYPTO_HASH select XXHASH help xxHash non-cryptographic hash algorithm. Extremely fast, working at speeds close to RAM limits. config CRYPTO_BLAKE2B tristate "BLAKE2b digest algorithm" select CRYPTO_HASH help Implementation of cryptographic hash function BLAKE2b (or just BLAKE2), optimized for 64bit platforms and can produce digests of any size between 1 to 64. The keyed hash is also implemented. This module provides the following algorithms: - blake2b-160 - blake2b-256 - blake2b-384 - blake2b-512 See https://blake2.net for further information. config CRYPTO_BLAKE2S_X86 bool "BLAKE2s digest algorithm (x86 accelerated version)" depends on X86 && 64BIT select CRYPTO_LIB_BLAKE2S_GENERIC select CRYPTO_ARCH_HAVE_LIB_BLAKE2S config CRYPTO_CRCT10DIF tristate "CRCT10DIF algorithm" select CRYPTO_HASH help CRC T10 Data Integrity Field computation is being cast as a crypto transform. This allows for faster crc t10 diff transforms to be used if they are available. config CRYPTO_CRCT10DIF_PCLMUL tristate "CRCT10DIF PCLMULQDQ hardware acceleration" depends on X86 && 64BIT && CRC_T10DIF select CRYPTO_HASH help For x86_64 processors with SSE4.2 and PCLMULQDQ supported, CRC T10 DIF PCLMULQDQ computation can be hardware accelerated PCLMULQDQ instruction. This option will create 'crct10dif-pclmul' module, which is faster when computing the crct10dif checksum as compared with the generic table implementation. config CRYPTO_CRCT10DIF_VPMSUM tristate "CRC32T10DIF powerpc64 hardware acceleration" depends on PPC64 && ALTIVEC && CRC_T10DIF select CRYPTO_HASH help CRC10T10DIF algorithm implemented using vector polynomial multiply-sum (vpmsum) instructions, introduced in POWER8. Enable on POWER8 and newer processors for improved performance. config CRYPTO_VPMSUM_TESTER tristate "Powerpc64 vpmsum hardware acceleration tester" depends on CRYPTO_CRCT10DIF_VPMSUM && CRYPTO_CRC32C_VPMSUM help Stress test for CRC32c and CRC-T10DIF algorithms implemented with POWER8 vpmsum instructions. Unless you are testing these algorithms, you don't need this. config CRYPTO_GHASH tristate "GHASH hash function" select CRYPTO_GF128MUL select CRYPTO_HASH help GHASH is the hash function used in GCM (Galois/Counter Mode). It is not a general-purpose cryptographic hash function. config CRYPTO_POLYVAL tristate select CRYPTO_GF128MUL select CRYPTO_HASH help POLYVAL is the hash function used in HCTR2. It is not a general-purpose cryptographic hash function. config CRYPTO_POLYVAL_CLMUL_NI tristate "POLYVAL hash function (CLMUL-NI accelerated)" depends on X86 && 64BIT select CRYPTO_POLYVAL help This is the x86_64 CLMUL-NI accelerated implementation of POLYVAL. It is used to efficiently implement HCTR2 on x86-64 processors that support carry-less multiplication instructions. config CRYPTO_POLY1305 tristate "Poly1305 authenticator algorithm" select CRYPTO_HASH select CRYPTO_LIB_POLY1305_GENERIC help Poly1305 authenticator algorithm, RFC7539. Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein. It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use in IETF protocols. This is the portable C implementation of Poly1305. config CRYPTO_POLY1305_X86_64 tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)" depends on X86 && 64BIT select CRYPTO_LIB_POLY1305_GENERIC select CRYPTO_ARCH_HAVE_LIB_POLY1305 help Poly1305 authenticator algorithm, RFC7539. Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein. It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use in IETF protocols. This is the x86_64 assembler implementation using SIMD instructions. config CRYPTO_POLY1305_MIPS tristate "Poly1305 authenticator algorithm (MIPS optimized)" depends on MIPS select CRYPTO_ARCH_HAVE_LIB_POLY1305 config CRYPTO_MD4 tristate "MD4 digest algorithm" select CRYPTO_HASH help MD4 message digest algorithm (RFC1320). config CRYPTO_MD5 tristate "MD5 digest algorithm" select CRYPTO_HASH help MD5 message digest algorithm (RFC1321). config CRYPTO_MD5_OCTEON tristate "MD5 digest algorithm (OCTEON)" depends on CPU_CAVIUM_OCTEON select CRYPTO_MD5 select CRYPTO_HASH help MD5 message digest algorithm (RFC1321) implemented using OCTEON crypto instructions, when available. config CRYPTO_MD5_PPC tristate "MD5 digest algorithm (PPC)" depends on PPC select CRYPTO_HASH help MD5 message digest algorithm (RFC1321) implemented in PPC assembler. config CRYPTO_MD5_SPARC64 tristate "MD5 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_MD5 select CRYPTO_HASH help MD5 message digest algorithm (RFC1321) implemented using sparc64 crypto instructions, when available. config CRYPTO_MICHAEL_MIC tristate "Michael MIC keyed digest algorithm" select CRYPTO_HASH help Michael MIC is used for message integrity protection in TKIP (IEEE 802.11i). This algorithm is required for TKIP, but it should not be used for other purposes because of the weakness of the algorithm. config CRYPTO_RMD160 tristate "RIPEMD-160 digest algorithm" select CRYPTO_HASH help RIPEMD-160 (ISO/IEC 10118-3:2004). RIPEMD-160 is a 160-bit cryptographic hash function. It is intended to be used as a secure replacement for the 128-bit hash functions MD4, MD5 and it's predecessor RIPEMD (not to be confused with RIPEMD-128). It's speed is comparable to SHA1 and there are no known attacks against RIPEMD-160. Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. See config CRYPTO_SHA1 tristate "SHA1 digest algorithm" select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). config CRYPTO_SHA1_SSSE3 tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)" depends on X86 && 64BIT select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions or Advanced Vector Extensions (AVX/AVX2) or SHA-NI(SHA Extensions New Instructions), when available. config CRYPTO_SHA256_SSSE3 tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)" depends on X86 && 64BIT select CRYPTO_SHA256 select CRYPTO_HASH help SHA-256 secure hash standard (DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector Extensions version 1 (AVX1), or Advanced Vector Extensions version 2 (AVX2) instructions, or SHA-NI (SHA Extensions New Instructions) when available. config CRYPTO_SHA512_SSSE3 tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)" depends on X86 && 64BIT select CRYPTO_SHA512 select CRYPTO_HASH help SHA-512 secure hash standard (DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector Extensions version 1 (AVX1), or Advanced Vector Extensions version 2 (AVX2) instructions, when available. config CRYPTO_SHA1_OCTEON tristate "SHA1 digest algorithm (OCTEON)" depends on CPU_CAVIUM_OCTEON select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using OCTEON crypto instructions, when available. config CRYPTO_SHA1_SPARC64 tristate "SHA1 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using sparc64 crypto instructions, when available. config CRYPTO_SHA1_PPC tristate "SHA1 digest algorithm (powerpc)" depends on PPC help This is the powerpc hardware accelerated implementation of the SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). config CRYPTO_SHA1_PPC_SPE tristate "SHA1 digest algorithm (PPC SPE)" depends on PPC && SPE help SHA-1 secure hash standard (DFIPS 180-4) implemented using powerpc SPE SIMD instruction set. config CRYPTO_SHA256 tristate "SHA224 and SHA256 digest algorithm" select CRYPTO_HASH select CRYPTO_LIB_SHA256 help SHA256 secure hash standard (DFIPS 180-2). This version of SHA implements a 256 bit hash with 128 bits of security against collision attacks. This code also includes SHA-224, a 224 bit hash with 112 bits of security against collision attacks. config CRYPTO_SHA256_PPC_SPE tristate "SHA224 and SHA256 digest algorithm (PPC SPE)" depends on PPC && SPE select CRYPTO_SHA256 select CRYPTO_HASH help SHA224 and SHA256 secure hash standard (DFIPS 180-2) implemented using powerpc SPE SIMD instruction set. config CRYPTO_SHA256_OCTEON tristate "SHA224 and SHA256 digest algorithm (OCTEON)" depends on CPU_CAVIUM_OCTEON select CRYPTO_SHA256 select CRYPTO_HASH help SHA-256 secure hash standard (DFIPS 180-2) implemented using OCTEON crypto instructions, when available. config CRYPTO_SHA256_SPARC64 tristate "SHA224 and SHA256 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_SHA256 select CRYPTO_HASH help SHA-256 secure hash standard (DFIPS 180-2) implemented using sparc64 crypto instructions, when available. config CRYPTO_SHA512 tristate "SHA384 and SHA512 digest algorithms" select CRYPTO_HASH help SHA512 secure hash standard (DFIPS 180-2). This version of SHA implements a 512 bit hash with 256 bits of security against collision attacks. This code also includes SHA-384, a 384 bit hash with 192 bits of security against collision attacks. config CRYPTO_SHA512_OCTEON tristate "SHA384 and SHA512 digest algorithms (OCTEON)" depends on CPU_CAVIUM_OCTEON select CRYPTO_SHA512 select CRYPTO_HASH help SHA-512 secure hash standard (DFIPS 180-2) implemented using OCTEON crypto instructions, when available. config CRYPTO_SHA512_SPARC64 tristate "SHA384 and SHA512 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_SHA512 select CRYPTO_HASH help SHA-512 secure hash standard (DFIPS 180-2) implemented using sparc64 crypto instructions, when available. config CRYPTO_SHA3 tristate "SHA3 digest algorithm" select CRYPTO_HASH help SHA-3 secure hash standard (DFIPS 202). It's based on cryptographic sponge function family called Keccak. References: http://keccak.noekeon.org/ config CRYPTO_SM3 tristate "SM3 digest algorithm" select CRYPTO_HASH help SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3). It is part of the Chinese Commercial Cryptography suite. References: http://www.oscca.gov.cn/UpFile/20101222141857786.pdf https://datatracker.ietf.org/doc/html/draft-shen-sm3-hash config CRYPTO_STREEBOG tristate "Streebog Hash Function" select CRYPTO_HASH help Streebog Hash Function (GOST R 34.11-2012, RFC 6986) is one of the Russian cryptographic standard algorithms (called GOST algorithms). This setting enables two hash algorithms with 256 and 512 bits output. References: https://tc26.ru/upload/iblock/fed/feddbb4d26b685903faa2ba11aea43f6.pdf https://tools.ietf.org/html/rfc6986 config CRYPTO_WP512 tristate "Whirlpool digest algorithms" select CRYPTO_HASH help Whirlpool hash algorithm 512, 384 and 256-bit hashes Whirlpool-512 is part of the NESSIE cryptographic primitives. Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard See also: config CRYPTO_GHASH_CLMUL_NI_INTEL tristate "GHASH hash function (CLMUL-NI accelerated)" depends on X86 && 64BIT select CRYPTO_CRYPTD help This is the x86_64 CLMUL-NI accelerated implementation of GHASH, the hash function used in GCM (Galois/Counter mode). comment "Ciphers" config CRYPTO_AES tristate "AES cipher algorithms" select CRYPTO_ALGAPI select CRYPTO_LIB_AES help AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. config CRYPTO_AES_TI tristate "Fixed time AES cipher" select CRYPTO_ALGAPI select CRYPTO_LIB_AES help This is a generic implementation of AES that attempts to eliminate data dependent latencies as much as possible without affecting performance too much. It is intended for use by the generic CCM and GCM drivers, and other CTR or CMAC/XCBC based modes that rely solely on encryption (although decryption is supported as well, but with a more dramatic performance hit) Instead of using 16 lookup tables of 1 KB each, (8 for encryption and 8 for decryption), this implementation only uses just two S-boxes of 256 bytes each, and attempts to eliminate data dependent latencies by prefetching the entire table into the cache at the start of each block. Interrupts are also disabled to avoid races where cachelines are evicted when the CPU is interrupted to do something else. config CRYPTO_AES_NI_INTEL tristate "AES cipher algorithms (AES-NI)" depends on X86 select CRYPTO_AEAD select CRYPTO_LIB_AES select CRYPTO_ALGAPI select CRYPTO_SKCIPHER select CRYPTO_SIMD help Use Intel AES-NI instructions for AES algorithm. AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. In addition to AES cipher algorithm support, the acceleration for some popular block cipher mode is supported too, including ECB, CBC, LRW, XTS. The 64 bit version has additional acceleration for CTR and XCTR. config CRYPTO_AES_SPARC64 tristate "AES cipher algorithms (SPARC64)" depends on SPARC64 select CRYPTO_SKCIPHER help Use SPARC64 crypto opcodes for AES algorithm. AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. In addition to AES cipher algorithm support, the acceleration for some popular block cipher mode is supported too, including ECB and CBC. config CRYPTO_AES_PPC_SPE tristate "AES cipher algorithms (PPC SPE)" depends on PPC && SPE select CRYPTO_SKCIPHER help AES cipher algorithms (FIPS-197). Additionally the acceleration for popular block cipher modes ECB, CBC, CTR and XTS is supported. This module should only be used for low power (router) devices without hardware AES acceleration (e.g. caam crypto). It reduces the size of the AES tables from 16KB to 8KB + 256 bytes and mitigates timining attacks. Nevertheless it might be not as secure as other architecture specific assembler implementations that work on 1KB tables or 256 bytes S-boxes. config CRYPTO_ANUBIS tristate "Anubis cipher algorithm" depends on CRYPTO_USER_API_ENABLE_OBSOLETE select CRYPTO_ALGAPI help Anubis cipher algorithm. Anubis is a variable key length cipher which can use keys from 128 bits to 320 bits in length. It was evaluated as a entrant in the NESSIE competition. See also: config CRYPTO_ARC4 tristate "ARC4 cipher algorithm" depends on CRYPTO_USER_API_ENABLE_OBSOLETE select CRYPTO_SKCIPHER select CRYPTO_LIB_ARC4 help ARC4 cipher algorithm. ARC4 is a stream cipher using keys ranging from 8 bits to 2048 bits in length. This algorithm is required for driver-based WEP, but it should not be for other purposes because of the weakness of the algorithm. config CRYPTO_BLOWFISH tristate "Blowfish cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_BLOWFISH_COMMON help Blowfish cipher algorithm, by Bruce Schneier. This is a variable key length cipher which can use keys from 32 bits to 448 bits in length. It's fast, simple and specifically designed for use on "large microprocessors". See also: config CRYPTO_BLOWFISH_COMMON tristate help Common parts of the Blowfish cipher algorithm shared by the generic c and the assembler implementations. See also: config CRYPTO_BLOWFISH_X86_64 tristate "Blowfish cipher algorithm (x86_64)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_BLOWFISH_COMMON imply CRYPTO_CTR help Blowfish cipher algorithm (x86_64), by Bruce Schneier. This is a variable key length cipher which can use keys from 32 bits to 448 bits in length. It's fast, simple and specifically designed for use on "large microprocessors". See also: config CRYPTO_CAMELLIA tristate "Camellia cipher algorithms" select CRYPTO_ALGAPI help Camellia cipher algorithms module. Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_X86_64 tristate "Camellia cipher algorithm (x86_64)" depends on X86 && 64BIT select CRYPTO_SKCIPHER imply CRYPTO_CTR help Camellia cipher algorithm module (x86_64). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_CAMELLIA_X86_64 select CRYPTO_SIMD imply CRYPTO_XTS help Camellia cipher algorithm module (x86_64/AES-NI/AVX). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)" depends on X86 && 64BIT select CRYPTO_CAMELLIA_AESNI_AVX_X86_64 help Camellia cipher algorithm module (x86_64/AES-NI/AVX2). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_SPARC64 tristate "Camellia cipher algorithm (SPARC64)" depends on SPARC64 select CRYPTO_ALGAPI select CRYPTO_SKCIPHER help Camellia cipher algorithm module (SPARC64). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAST_COMMON tristate help Common parts of the CAST cipher algorithms shared by the generic c and the assembler implementations. config CRYPTO_CAST5 tristate "CAST5 (CAST-128) cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_CAST_COMMON help The CAST5 encryption algorithm (synonymous with CAST-128) is described in RFC2144. config CRYPTO_CAST5_AVX_X86_64 tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_CAST5 select CRYPTO_CAST_COMMON select CRYPTO_SIMD imply CRYPTO_CTR help The CAST5 encryption algorithm (synonymous with CAST-128) is described in RFC2144. This module provides the Cast5 cipher algorithm that processes sixteen blocks parallel using the AVX instruction set. config CRYPTO_CAST6 tristate "CAST6 (CAST-256) cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_CAST_COMMON help The CAST6 encryption algorithm (synonymous with CAST-256) is described in RFC2612. config CRYPTO_CAST6_AVX_X86_64 tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_CAST6 select CRYPTO_CAST_COMMON select CRYPTO_SIMD imply CRYPTO_XTS imply CRYPTO_CTR help The CAST6 encryption algorithm (synonymous with CAST-256) is described in RFC2612. This module provides the Cast6 cipher algorithm that processes eight blocks parallel using the AVX instruction set. config CRYPTO_DES tristate "DES and Triple DES EDE cipher algorithms" select CRYPTO_ALGAPI select CRYPTO_LIB_DES help DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). config CRYPTO_DES_SPARC64 tristate "DES and Triple DES EDE cipher algorithms (SPARC64)" depends on SPARC64 select CRYPTO_ALGAPI select CRYPTO_LIB_DES select CRYPTO_SKCIPHER help DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3), optimized using SPARC64 crypto opcodes. config CRYPTO_DES3_EDE_X86_64 tristate "Triple DES EDE cipher algorithm (x86-64)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_LIB_DES imply CRYPTO_CTR help Triple DES EDE (FIPS 46-3) algorithm. This module provides implementation of the Triple DES EDE cipher algorithm that is optimized for x86-64 processors. Two versions of algorithm are provided; regular processing one input block and one that processes three blocks parallel. config CRYPTO_FCRYPT tristate "FCrypt cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_SKCIPHER help FCrypt algorithm used by RxRPC. config CRYPTO_KHAZAD tristate "Khazad cipher algorithm" depends on CRYPTO_USER_API_ENABLE_OBSOLETE select CRYPTO_ALGAPI help Khazad cipher algorithm. Khazad was a finalist in the initial NESSIE competition. It is an algorithm optimized for 64-bit processors with good performance on 32-bit processors. Khazad uses an 128 bit key size. See also: config CRYPTO_CHACHA20 tristate "ChaCha stream cipher algorithms" select CRYPTO_LIB_CHACHA_GENERIC select CRYPTO_SKCIPHER help The ChaCha20, XChaCha20, and XChaCha12 stream cipher algorithms. ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J. Bernstein and further specified in RFC7539 for use in IETF protocols. This is the portable C implementation of ChaCha20. See also: XChaCha20 is the application of the XSalsa20 construction to ChaCha20 rather than to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or 96 bits using the RFC7539 convention) to 192 bits, while provably retaining ChaCha20's security. See also: XChaCha12 is XChaCha20 reduced to 12 rounds, with correspondingly reduced security margin but increased performance. It can be needed in some performance-sensitive scenarios. config CRYPTO_CHACHA20_X86_64 tristate "ChaCha stream cipher algorithms (x86_64/SSSE3/AVX2/AVX-512VL)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_LIB_CHACHA_GENERIC select CRYPTO_ARCH_HAVE_LIB_CHACHA help SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20, XChaCha20, and XChaCha12 stream ciphers. config CRYPTO_CHACHA_MIPS tristate "ChaCha stream cipher algorithms (MIPS 32r2 optimized)" depends on CPU_MIPS32_R2 select CRYPTO_SKCIPHER select CRYPTO_ARCH_HAVE_LIB_CHACHA config CRYPTO_SEED tristate "SEED cipher algorithm" depends on CRYPTO_USER_API_ENABLE_OBSOLETE select CRYPTO_ALGAPI help SEED cipher algorithm (RFC4269). SEED is a 128-bit symmetric key block cipher that has been developed by KISA (Korea Information Security Agency) as a national standard encryption algorithm of the Republic of Korea. It is a 16 round block cipher with the key size of 128 bit. See also: config CRYPTO_SERPENT tristate "Serpent cipher algorithm" select CRYPTO_ALGAPI help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. See also: config CRYPTO_SERPENT_SSE2_X86_64 tristate "Serpent cipher algorithm (x86_64/SSE2)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_SERPENT select CRYPTO_SIMD imply CRYPTO_CTR help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides Serpent cipher algorithm that processes eight blocks parallel using SSE2 instruction set. See also: config CRYPTO_SERPENT_SSE2_586 tristate "Serpent cipher algorithm (i586/SSE2)" depends on X86 && !64BIT select CRYPTO_SKCIPHER select CRYPTO_SERPENT select CRYPTO_SIMD imply CRYPTO_CTR help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides Serpent cipher algorithm that processes four blocks parallel using SSE2 instruction set. See also: config CRYPTO_SERPENT_AVX_X86_64 tristate "Serpent cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_SERPENT select CRYPTO_SIMD imply CRYPTO_XTS imply CRYPTO_CTR help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides the Serpent cipher algorithm that processes eight blocks parallel using the AVX instruction set. See also: config CRYPTO_SERPENT_AVX2_X86_64 tristate "Serpent cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT select CRYPTO_SERPENT_AVX_X86_64 help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides Serpent cipher algorithm that processes 16 blocks parallel using AVX2 instruction set. See also: config CRYPTO_SM4 tristate "SM4 cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_LIB_SM4 help SM4 cipher algorithms (OSCCA GB/T 32907-2016). SM4 (GBT.32907-2016) is a cryptographic standard issued by the Organization of State Commercial Administration of China (OSCCA) as an authorized cryptographic algorithms for the use within China. SMS4 was originally created for use in protecting wireless networks, and is mandated in the Chinese National Standard for Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure) (GB.15629.11-2003). The latest SM4 standard (GBT.32907-2016) was proposed by OSCCA and standardized through TC 260 of the Standardization Administration of the People's Republic of China (SAC). The input, output, and key of SMS4 are each 128 bits. See also: If unsure, say N. config CRYPTO_SM4_AESNI_AVX_X86_64 tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_SIMD select CRYPTO_ALGAPI select CRYPTO_LIB_SM4 help SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX). SM4 (GBT.32907-2016) is a cryptographic standard issued by the Organization of State Commercial Administration of China (OSCCA) as an authorized cryptographic algorithms for the use within China. This is SM4 optimized implementation using AES-NI/AVX/x86_64 instruction set for block cipher. Through two affine transforms, we can use the AES S-Box to simulate the SM4 S-Box to achieve the effect of instruction acceleration. If unsure, say N. config CRYPTO_SM4_AESNI_AVX2_X86_64 tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX2)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_SIMD select CRYPTO_ALGAPI select CRYPTO_LIB_SM4 select CRYPTO_SM4_AESNI_AVX_X86_64 help SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX2). SM4 (GBT.32907-2016) is a cryptographic standard issued by the Organization of State Commercial Administration of China (OSCCA) as an authorized cryptographic algorithms for the use within China. This is SM4 optimized implementation using AES-NI/AVX2/x86_64 instruction set for block cipher. Through two affine transforms, we can use the AES S-Box to simulate the SM4 S-Box to achieve the effect of instruction acceleration. If unsure, say N. config CRYPTO_TEA tristate "TEA, XTEA and XETA cipher algorithms" depends on CRYPTO_USER_API_ENABLE_OBSOLETE select CRYPTO_ALGAPI help TEA cipher algorithm. Tiny Encryption Algorithm is a simple cipher that uses many rounds for security. It is very fast and uses little memory. Xtendend Tiny Encryption Algorithm is a modification to the TEA algorithm to address a potential key weakness in the TEA algorithm. Xtendend Encryption Tiny Algorithm is a mis-implementation of the XTEA algorithm for compatibility purposes. config CRYPTO_TWOFISH tristate "Twofish cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON help Twofish cipher algorithm. Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: config CRYPTO_TWOFISH_COMMON tristate help Common parts of the Twofish cipher algorithm shared by the generic c and the assembler implementations. config CRYPTO_TWOFISH_586 tristate "Twofish cipher algorithms (i586)" depends on (X86 || UML_X86) && !64BIT select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON imply CRYPTO_CTR help Twofish cipher algorithm. Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: config CRYPTO_TWOFISH_X86_64 tristate "Twofish cipher algorithm (x86_64)" depends on (X86 || UML_X86) && 64BIT select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON imply CRYPTO_CTR help Twofish cipher algorithm (x86_64). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: config CRYPTO_TWOFISH_X86_64_3WAY tristate "Twofish cipher algorithm (x86_64, 3-way parallel)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 help Twofish cipher algorithm (x86_64, 3-way parallel). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. This module provides Twofish cipher algorithm that processes three blocks parallel, utilizing resources of out-of-order CPUs better. See also: config CRYPTO_TWOFISH_AVX_X86_64 tristate "Twofish cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_SKCIPHER select CRYPTO_SIMD select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 select CRYPTO_TWOFISH_X86_64_3WAY imply CRYPTO_XTS help Twofish cipher algorithm (x86_64/AVX). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. This module provides the Twofish cipher algorithm that processes eight blocks parallel using the AVX Instruction Set. See also: comment "Compression" config CRYPTO_DEFLATE tristate "Deflate compression algorithm" select CRYPTO_ALGAPI select CRYPTO_ACOMP2 select ZLIB_INFLATE select ZLIB_DEFLATE help This is the Deflate algorithm (RFC1951), specified for use in IPSec with the IPCOMP protocol (RFC3173, RFC2394). You will most probably want this if using IPSec. config CRYPTO_LZO tristate "LZO compression algorithm" select CRYPTO_ALGAPI select CRYPTO_ACOMP2 select LZO_COMPRESS select LZO_DECOMPRESS help This is the LZO algorithm. config CRYPTO_842 tristate "842 compression algorithm" select CRYPTO_ALGAPI select CRYPTO_ACOMP2 select 842_COMPRESS select 842_DECOMPRESS help This is the 842 algorithm. config CRYPTO_LZ4 tristate "LZ4 compression algorithm" select CRYPTO_ALGAPI select CRYPTO_ACOMP2 select LZ4_COMPRESS select LZ4_DECOMPRESS help This is the LZ4 algorithm. config CRYPTO_LZ4HC tristate "LZ4HC compression algorithm" select CRYPTO_ALGAPI select CRYPTO_ACOMP2 select LZ4HC_COMPRESS select LZ4_DECOMPRESS help This is the LZ4 high compression mode algorithm. config CRYPTO_ZSTD tristate "Zstd compression algorithm" select CRYPTO_ALGAPI select CRYPTO_ACOMP2 select ZSTD_COMPRESS select ZSTD_DECOMPRESS help This is the zstd algorithm. comment "Random Number Generation" config CRYPTO_ANSI_CPRNG tristate "Pseudo Random Number Generation for Cryptographic modules" select CRYPTO_AES select CRYPTO_RNG help This option enables the generic pseudo random number generator for cryptographic modules. Uses the Algorithm specified in ANSI X9.31 A.2.4. Note that this option must be enabled if CRYPTO_FIPS is selected menuconfig CRYPTO_DRBG_MENU tristate "NIST SP800-90A DRBG" help NIST SP800-90A compliant DRBG. In the following submenu, one or more of the DRBG types must be selected. if CRYPTO_DRBG_MENU config CRYPTO_DRBG_HMAC bool default y select CRYPTO_HMAC select CRYPTO_SHA512 config CRYPTO_DRBG_HASH bool "Enable Hash DRBG" select CRYPTO_SHA256 help Enable the Hash DRBG variant as defined in NIST SP800-90A. config CRYPTO_DRBG_CTR bool "Enable CTR DRBG" select CRYPTO_AES select CRYPTO_CTR help Enable the CTR DRBG variant as defined in NIST SP800-90A. config CRYPTO_DRBG tristate default CRYPTO_DRBG_MENU select CRYPTO_RNG select CRYPTO_JITTERENTROPY endif # if CRYPTO_DRBG_MENU config CRYPTO_JITTERENTROPY tristate "Jitterentropy Non-Deterministic Random Number Generator" select CRYPTO_RNG help The Jitterentropy RNG is a noise that is intended to provide seed to another RNG. The RNG does not perform any cryptographic whitening of the generated random numbers. This Jitterentropy RNG registers with the kernel crypto API and can be used by any caller. config CRYPTO_USER_API tristate config CRYPTO_USER_API_HASH tristate "User-space interface for hash algorithms" depends on NET select CRYPTO_HASH select CRYPTO_USER_API help This option enables the user-spaces interface for hash algorithms. config CRYPTO_USER_API_SKCIPHER tristate "User-space interface for symmetric key cipher algorithms" depends on NET select CRYPTO_SKCIPHER select CRYPTO_USER_API help This option enables the user-spaces interface for symmetric key cipher algorithms. config CRYPTO_USER_API_RNG tristate "User-space interface for random number generator algorithms" depends on NET select CRYPTO_RNG select CRYPTO_USER_API help This option enables the user-spaces interface for random number generator algorithms. config CRYPTO_USER_API_RNG_CAVP bool "Enable CAVP testing of DRBG" depends on CRYPTO_USER_API_RNG && CRYPTO_DRBG help This option enables extra API for CAVP testing via the user-space interface: resetting of DRBG entropy, and providing Additional Data. This should only be enabled for CAVP testing. You should say no unless you know what this is. config CRYPTO_USER_API_AEAD tristate "User-space interface for AEAD cipher algorithms" depends on NET select CRYPTO_AEAD select CRYPTO_SKCIPHER select CRYPTO_NULL select CRYPTO_USER_API help This option enables the user-spaces interface for AEAD cipher algorithms. config CRYPTO_USER_API_ENABLE_OBSOLETE bool "Enable obsolete cryptographic algorithms for userspace" depends on CRYPTO_USER_API default y help Allow obsolete cryptographic algorithms to be selected that have already been phased out from internal use by the kernel, and are only useful for userspace clients that still rely on them. config CRYPTO_STATS bool "Crypto usage statistics for User-space" depends on CRYPTO_USER help This option enables the gathering of crypto stats. This will collect: - encrypt/decrypt size and numbers of symmeric operations - compress/decompress size and numbers of compress operations - size and numbers of hash operations - encrypt/decrypt/sign/verify numbers for asymmetric operations - generate/seed numbers for rng operations config CRYPTO_HASH_INFO bool source "drivers/crypto/Kconfig" source "crypto/asymmetric_keys/Kconfig" source "certs/Kconfig" endif # if CRYPTO