Lines Matching refs:connected

68 	hex "Parallel port where the LCD is connected"
72 	  The address of the parallel port where the LCD is connected.
201 	  Say Y here if you have an HD44780 or KS-0074 LCD connected to your
215 	  This is the index of the parallel port the panel is connected to. One
217 	  and LCD are connected to two separate ports, you have to start two
248 	  This enables and configures a keypad connected to the parallel port.
265 	   This enables and configures an LCD connected to the parallel port.
361 	int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
366 	  signal has been connected. It can be :
368 	          0 : no connection (eg: connected to ground)
369 	      1..17 : directly connected to any of these pins on the DB25 plug
370 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
376 	int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
381 	  signal has been connected. It can be :
383 	          0 : no connection (eg: connected to ground)
384 	      1..17 : directly connected to any of these pins on the DB25 plug
385 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
391 	int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
396 	  signal has been connected. It can be :
398 	          0 : no connection (eg: connected to ground)
399 	      1..17 : directly connected to any of these pins on the DB25 plug
400 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
406 	int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
411 	  LCD 'SCL' signal has been connected. It can be :
413 	          0 : no connection (eg: connected to ground)
414 	      1..17 : directly connected to any of these pins on the DB25 plug
415 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
421 	int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
426 	  LCD 'SDA' signal has been connected. It can be :
428 	          0 : no connection (eg: connected to ground)
429 	      1..17 : directly connected to any of these pins on the DB25 plug
430 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
436 	int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
441 	  has been connected. It can be :
443 	          0 : no connection (eg: connected to ground)
444 	      1..17 : directly connected to any of these pins on the DB25 plug
445 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).