Lines Matching refs:radio
12 Say Y here to enable selecting AM/FM radio adapters.
19 source "drivers/media/radio/si470x/Kconfig"
25 source "drivers/media/radio/si4713/Kconfig"
34 Choose Y here if you have this FM radio chip.
36 In order to control your radio card, you will need to use programs
42 module will be called radio-si476x.
45 tristate "AverMedia MR 800 USB FM radio support"
48 Say Y here if you want to connect this type of radio to your
54 module will be called radio-mr800.
57 tristate "D-Link/GemTek USB FM radio support"
60 Say Y here if you want to connect this type of radio to your
69 tristate "Guillemot MAXI Radio FM 2000 radio"
73 Choose Y here if you have this radio card. This card may also be
76 In order to control your radio card, you will need to use programs
82 module will be called radio-maxiradio.
85 tristate "Griffin radioSHARK USB radio receiver"
89 Choose Y here if you have this radio receiver.
94 In order to control your radio card, you will need to use programs
100 module will be called radio-shark.
103 tristate "Griffin radioSHARK2 USB radio receiver"
106 Choose Y here if you have this radio receiver.
111 In order to control your radio card, you will need to use programs
117 module will be called radio-shark2.
127 module will be called radio-keene.
130 tristate "Thanko's Raremono AM/FM/SW radio support"
134 It is one of the very few or perhaps the only consumer USB radio device
141 module will be called radio-raremono.
144 tristate "Masterkit MA901 USB FM radio support"
147 Say Y here if you want to connect this type of radio to your
153 module will be called radio-ma901.
156 tristate "TEA5764 I2C FM radio support"
164 module will be called radio-tea5764.
178 Say Y here if you want to use the SAA7706H Car radio Digital
199 tristate "Enable the Timberdale radio driver"
216 Choose Y here if you have this FM radio chip.
218 In order to control your radio card, you will need to use programs
224 module will be called radio-wl1273.
226 # TI's ST based wl128x FM radio
227 source "drivers/media/radio/wl128x/Kconfig"
234 bool "ISA radio devices"
250 Choose Y here if you have one of these AM/FM radio cards, and then
254 module will be called radio-cadet.
262 Choose Y here if you have one of these FM radio cards, and then fill
269 If you have a GemTeks combined (PnP) sound- and radio card you must
278 module will be called radio-aimslab.
294 Choose Y here if you have this FM radio card, and then fill in the
302 module will be called radio-rtrack2.
318 Choose Y here if you have one of these FM radio cards, and then fill
322 module will be called radio-aztech.
339 Choose Y here if you have this FM radio card, and then fill in the
348 module will be called radio-gemtek.
375 tristate "miroSOUND PCM20 radio"
381 Choose Y here if you have this FM radio card. You also need to enable
384 is required for the radio-miropcm20.
387 module will be called radio-miropcm20.
394 Choose Y here if you have one of these FM radio cards.
397 module will be called radio-sf16fmi.
405 Choose Y here if you have one of these FM radio cards.
408 module will be called radio-sf16fmr2.
416 Choose Y here if you have this FM radio card.
423 module will be called radio-terratec.
426 tristate "Trust FM radio card"
431 This is a driver for the Trust FM radio cards. Say Y if you have
439 module will be called radio-trust.
446 Enter the I/O port of your Trust FM radio card. If unsure, try the
455 Choose Y here if you have one of these FM radio cards, and then fill
463 module will be called radio-typhoon.
470 Enter the I/O port of your Typhoon or EcoRadio radio card.
477 Enter the frequency used for muting the radio. The device is never
480 radio device is set to the frequency you can enter here whenever
481 the device is muted. There should be no local radio station at that
490 Choose Y here if you have one of these FM radio cards, and then fill
498 module will be called radio-zoltrix.
505 Enter the I/O port of your Zoltrix radio card.