Lines Matching refs:be

20 	  will then be presented with several options that allow more precise
70 	  the Linux router will also be able to take the packet's source
72 	  of the packet can be used for routing decisions as well.
84 	  Normally, the routing tables specify a single action to be taken in
88 	  for those packets. The router considers all these paths to be of
98 	  received packets which look strange and could be evidence of an
123 	  net via NFS and you want the IP address of your computer to be
131 	  must be operating on your network.  Read
140 	  net via NFS and you want the IP address of your computer to be
146 	  want to use BOOTP, a BOOTP server must be operating on your network.
155 	  net via NFS and you want the IP address of your computer to be
158 	  here. Note that if you want to use RARP, a RARP server must be
171 	  can be useful if you want to make your (or some other) machine
177 	  be inserted in and removed from the running kernel whenever you
213 	  Network), but can be distributed all over the Internet. If you want
240 	  will also be able to take interfaces and packet marks into
288 	  be taken as absolute truth.
313 	  encapsulating protocol. This can be used with xfrm mode tunnel to give
327 	  Foo over UDP allows any IP protocol to be directly encapsulated
330 	  and RSS) can be leveraged to provide better service.
338 	  When this option is enabled IP tunnels can be configured to use
347 	  AH can be used with various authentication algorithms.  Besides
349 	  implementations of the algorithms that RFC 8221 lists as MUST be
362 	  ESP can be used with various encryption and authentication algorithms.
364 	  implementations of the algorithms that RFC 8221 lists as MUST be
477 	  selection will be made (CUBIC with new Reno as a fallback).
527 	  based on network conditions and in a way so as to be fair with
643 	  ECN marking and be configured for marking when reaching defined switch
686 	  Select the TCP congestion control that will be used by default