1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Based on arch/arm/include/asm/memory.h
4 *
5 * Copyright (C) 2000-2002 Russell King
6 * Copyright (C) 2012 ARM Ltd.
7 *
8 * Note: this file should not be included by non-asm/.h files
9 */
10 #ifndef __ASM_MEMORY_H
11 #define __ASM_MEMORY_H
12
13 #include <linux/const.h>
14 #include <linux/sizes.h>
15 #include <asm/page-def.h>
16
17 /*
18 * Size of the PCI I/O space. This must remain a power of two so that
19 * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses.
20 */
21 #define PCI_IO_SIZE SZ_16M
22
23 /*
24 * VMEMMAP_SIZE - allows the whole linear region to be covered by
25 * a struct page array
26 *
27 * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE
28 * needs to cover the memory region from the beginning of the 52-bit
29 * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to
30 * keep a constant PAGE_OFFSET and "fallback" to using the higher end
31 * of the VMEMMAP where 52-bit support is not available in hardware.
32 */
33 #define VMEMMAP_SHIFT (PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT)
34 #define VMEMMAP_SIZE ((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) >> VMEMMAP_SHIFT)
35
36 /*
37 * PAGE_OFFSET - the virtual address of the start of the linear map, at the
38 * start of the TTBR1 address space.
39 * PAGE_END - the end of the linear map, where all other kernel mappings begin.
40 * KIMAGE_VADDR - the virtual address of the start of the kernel image.
41 * VA_BITS - the maximum number of bits for virtual addresses.
42 */
43 #define VA_BITS (CONFIG_ARM64_VA_BITS)
44 #define _PAGE_OFFSET(va) (-(UL(1) << (va)))
45 #define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS))
46 #define KIMAGE_VADDR (MODULES_END)
47 #define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
48 #define MODULES_VADDR (_PAGE_END(VA_BITS_MIN))
49 #define MODULES_VSIZE (SZ_128M)
50 #define VMEMMAP_START (-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
51 #define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE)
52 #define PCI_IO_END (VMEMMAP_START - SZ_8M)
53 #define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
54 #define FIXADDR_TOP (VMEMMAP_START - SZ_32M)
55
56 #if VA_BITS > 48
57 #define VA_BITS_MIN (48)
58 #else
59 #define VA_BITS_MIN (VA_BITS)
60 #endif
61
62 #define _PAGE_END(va) (-(UL(1) << ((va) - 1)))
63
64 #define KERNEL_START _text
65 #define KERNEL_END _end
66
67 /*
68 * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
69 * address space for the shadow region respectively. They can bloat the stack
70 * significantly, so double the (minimum) stack size when they are in use.
71 */
72 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
73 #define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
74 #define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
75 + KASAN_SHADOW_OFFSET)
76 #define PAGE_END (KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
77 #define KASAN_THREAD_SHIFT 1
78 #else
79 #define KASAN_THREAD_SHIFT 0
80 #define PAGE_END (_PAGE_END(VA_BITS_MIN))
81 #endif /* CONFIG_KASAN */
82
83 #define MIN_THREAD_SHIFT (14 + KASAN_THREAD_SHIFT)
84
85 /*
86 * VMAP'd stacks are allocated at page granularity, so we must ensure that such
87 * stacks are a multiple of page size.
88 */
89 #if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
90 #define THREAD_SHIFT PAGE_SHIFT
91 #else
92 #define THREAD_SHIFT MIN_THREAD_SHIFT
93 #endif
94
95 #if THREAD_SHIFT >= PAGE_SHIFT
96 #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
97 #endif
98
99 #define THREAD_SIZE (UL(1) << THREAD_SHIFT)
100
101 /*
102 * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
103 * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
104 * assembly.
105 */
106 #ifdef CONFIG_VMAP_STACK
107 #define THREAD_ALIGN (2 * THREAD_SIZE)
108 #else
109 #define THREAD_ALIGN THREAD_SIZE
110 #endif
111
112 #define IRQ_STACK_SIZE THREAD_SIZE
113
114 #define OVERFLOW_STACK_SIZE SZ_4K
115
116 #if PAGE_SIZE == SZ_4K
117 #define NVHE_STACK_SHIFT (PAGE_SHIFT + 1)
118 #else
119 #define NVHE_STACK_SHIFT PAGE_SHIFT
120 #endif
121
122 #define NVHE_STACK_SIZE (UL(1) << NVHE_STACK_SHIFT)
123
124 /*
125 * With the minimum frame size of [x29, x30], exactly half the combined
126 * sizes of the hyp and overflow stacks is the maximum size needed to
127 * save the unwinded stacktrace; plus an additional entry to delimit the
128 * end.
129 */
130 #define NVHE_STACKTRACE_SIZE ((OVERFLOW_STACK_SIZE + NVHE_STACK_SIZE) / 2 + sizeof(long))
131
132 /*
133 * Alignment of kernel segments (e.g. .text, .data).
134 *
135 * 4 KB granule: 16 level 3 entries, with contiguous bit
136 * 16 KB granule: 4 level 3 entries, without contiguous bit
137 * 64 KB granule: 1 level 3 entry
138 */
139 #define SEGMENT_ALIGN SZ_64K
140
141 /*
142 * Memory types available.
143 *
144 * IMPORTANT: MT_NORMAL must be index 0 since vm_get_page_prot() may 'or' in
145 * the MT_NORMAL_TAGGED memory type for PROT_MTE mappings. Note
146 * that protection_map[] only contains MT_NORMAL attributes.
147 */
148 #define MT_NORMAL 0
149 #define MT_NORMAL_TAGGED 1
150 #define MT_NORMAL_NC 2
151 #define MT_DEVICE_nGnRnE 3
152 #define MT_DEVICE_nGnRE 4
153 #define MT_NORMAL_iNC_oWB 5
154
155 /*
156 * Memory types for Stage-2 translation
157 */
158 #define MT_S2_NORMAL 0xf
159 #define MT_S2_NORMAL_NC 0x5
160 #define MT_S2_DEVICE_nGnRE 0x1
161
162 /*
163 * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001
164 * Stage-2 enforces Normal-WB and Device-nGnRE
165 */
166 #define MT_S2_FWB_NORMAL 6
167 #define MT_S2_FWB_NORMAL_NC 5
168 #define MT_S2_FWB_DEVICE_nGnRE 1
169
170 #ifdef CONFIG_ARM64_4K_PAGES
171 #define IOREMAP_MAX_ORDER (PUD_SHIFT)
172 #else
173 #define IOREMAP_MAX_ORDER (PMD_SHIFT)
174 #endif
175
176 /*
177 * Open-coded (swapper_pg_dir - reserved_pg_dir) as this cannot be calculated
178 * until link time.
179 */
180 #define RESERVED_SWAPPER_OFFSET (PAGE_SIZE)
181
182 /*
183 * Open-coded (swapper_pg_dir - tramp_pg_dir) as this cannot be calculated
184 * until link time.
185 */
186 #define TRAMP_SWAPPER_OFFSET (2 * PAGE_SIZE)
187
188 #ifndef __ASSEMBLY__
189
190 #include <linux/bitops.h>
191 #include <linux/compiler.h>
192 #include <linux/mmdebug.h>
193 #include <linux/types.h>
194 #include <asm/bug.h>
195
196 extern u64 vabits_actual;
197
198 extern s64 memstart_addr;
199 /* PHYS_OFFSET - the physical address of the start of memory. */
200 #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
201
202 /* the virtual base of the kernel image */
203 extern u64 kimage_vaddr;
204
205 /* the offset between the kernel virtual and physical mappings */
206 extern u64 kimage_voffset;
207
kaslr_offset(void)208 static inline unsigned long kaslr_offset(void)
209 {
210 return kimage_vaddr - KIMAGE_VADDR;
211 }
212
213 /*
214 * Allow all memory at the discovery stage. We will clip it later.
215 */
216 #define MIN_MEMBLOCK_ADDR 0
217 #define MAX_MEMBLOCK_ADDR U64_MAX
218
219 /*
220 * PFNs are used to describe any physical page; this means
221 * PFN 0 == physical address 0.
222 *
223 * This is the PFN of the first RAM page in the kernel
224 * direct-mapped view. We assume this is the first page
225 * of RAM in the mem_map as well.
226 */
227 #define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
228
229 /*
230 * When dealing with data aborts, watchpoints, or instruction traps we may end
231 * up with a tagged userland pointer. Clear the tag to get a sane pointer to
232 * pass on to access_ok(), for instance.
233 */
234 #define __untagged_addr(addr) \
235 ((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
236
237 #define untagged_addr(addr) ({ \
238 u64 __addr = (__force u64)(addr); \
239 __addr &= __untagged_addr(__addr); \
240 (__force __typeof__(addr))__addr; \
241 })
242
243 #if defined(CONFIG_KASAN_SW_TAGS) || defined(CONFIG_KASAN_HW_TAGS)
244 #define __tag_shifted(tag) ((u64)(tag) << 56)
245 #define __tag_reset(addr) __untagged_addr(addr)
246 #define __tag_get(addr) (__u8)((u64)(addr) >> 56)
247 #else
248 #define __tag_shifted(tag) 0UL
249 #define __tag_reset(addr) (addr)
250 #define __tag_get(addr) 0
251 #endif /* CONFIG_KASAN_SW_TAGS || CONFIG_KASAN_HW_TAGS */
252
__tag_set(const void * addr,u8 tag)253 static inline const void *__tag_set(const void *addr, u8 tag)
254 {
255 u64 __addr = (u64)addr & ~__tag_shifted(0xff);
256 return (const void *)(__addr | __tag_shifted(tag));
257 }
258
259 #ifdef CONFIG_KASAN_HW_TAGS
260 #define arch_enable_tag_checks_sync() mte_enable_kernel_sync()
261 #define arch_enable_tag_checks_async() mte_enable_kernel_async()
262 #define arch_enable_tag_checks_asymm() mte_enable_kernel_asymm()
263 #define arch_suppress_tag_checks_start() mte_enable_tco()
264 #define arch_suppress_tag_checks_stop() mte_disable_tco()
265 #define arch_force_async_tag_fault() mte_check_tfsr_exit()
266 #define arch_get_random_tag() mte_get_random_tag()
267 #define arch_get_mem_tag(addr) mte_get_mem_tag(addr)
268 #define arch_set_mem_tag_range(addr, size, tag, init) \
269 mte_set_mem_tag_range((addr), (size), (tag), (init))
270 #endif /* CONFIG_KASAN_HW_TAGS */
271
272 /*
273 * Physical vs virtual RAM address space conversion. These are
274 * private definitions which should NOT be used outside memory.h
275 * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
276 */
277
278
279 /*
280 * Check whether an arbitrary address is within the linear map, which
281 * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
282 * kernel's TTBR1 address range.
283 */
284 #define __is_lm_address(addr) (((u64)(addr) - PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
285
286 #define __lm_to_phys(addr) (((addr) - PAGE_OFFSET) + PHYS_OFFSET)
287 #define __kimg_to_phys(addr) ((addr) - kimage_voffset)
288
289 #define __virt_to_phys_nodebug(x) ({ \
290 phys_addr_t __x = (phys_addr_t)(__tag_reset(x)); \
291 __is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x); \
292 })
293
294 #define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x))
295
296 #ifdef CONFIG_DEBUG_VIRTUAL
297 extern phys_addr_t __virt_to_phys(unsigned long x);
298 extern phys_addr_t __phys_addr_symbol(unsigned long x);
299 #else
300 #define __virt_to_phys(x) __virt_to_phys_nodebug(x)
301 #define __phys_addr_symbol(x) __pa_symbol_nodebug(x)
302 #endif /* CONFIG_DEBUG_VIRTUAL */
303
304 #define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
305 #define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset))
306
307 /*
308 * Convert a page to/from a physical address
309 */
310 #define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
311 #define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
312
313 /*
314 * Note: Drivers should NOT use these. They are the wrong
315 * translation for translating DMA addresses. Use the driver
316 * DMA support - see dma-mapping.h.
317 */
318 #define virt_to_phys virt_to_phys
virt_to_phys(const volatile void * x)319 static inline phys_addr_t virt_to_phys(const volatile void *x)
320 {
321 return __virt_to_phys((unsigned long)(x));
322 }
323
324 #define phys_to_virt phys_to_virt
phys_to_virt(phys_addr_t x)325 static inline void *phys_to_virt(phys_addr_t x)
326 {
327 return (void *)(__phys_to_virt(x));
328 }
329
330 /*
331 * Drivers should NOT use these either.
332 */
333 #define __pa(x) __virt_to_phys((unsigned long)(x))
334 #define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
335 #define __pa_nodebug(x) __virt_to_phys_nodebug((unsigned long)(x))
336 #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x)))
337 #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
338 #define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x)))
339 #define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x))
340
341 /*
342 * virt_to_page(x) convert a _valid_ virtual address to struct page *
343 * virt_addr_valid(x) indicates whether a virtual address is valid
344 */
345 #define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET)
346
347 #if defined(CONFIG_DEBUG_VIRTUAL)
348 #define page_to_virt(x) ({ \
349 __typeof__(x) __page = x; \
350 void *__addr = __va(page_to_phys(__page)); \
351 (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
352 })
353 #define virt_to_page(x) pfn_to_page(virt_to_pfn(x))
354 #else
355 #define page_to_virt(x) ({ \
356 __typeof__(x) __page = x; \
357 u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\
358 u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE); \
359 (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
360 })
361
362 #define virt_to_page(x) ({ \
363 u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE; \
364 u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page)); \
365 (struct page *)__addr; \
366 })
367 #endif /* CONFIG_DEBUG_VIRTUAL */
368
369 #define virt_addr_valid(addr) ({ \
370 __typeof__(addr) __addr = __tag_reset(addr); \
371 __is_lm_address(__addr) && pfn_is_map_memory(virt_to_pfn(__addr)); \
372 })
373
374 void dump_mem_limit(void);
375 #endif /* !ASSEMBLY */
376
377 /*
378 * Given that the GIC architecture permits ITS implementations that can only be
379 * configured with a LPI table address once, GICv3 systems with many CPUs may
380 * end up reserving a lot of different regions after a kexec for their LPI
381 * tables (one per CPU), as we are forced to reuse the same memory after kexec
382 * (and thus reserve it persistently with EFI beforehand)
383 */
384 #if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS)
385 # define INIT_MEMBLOCK_RESERVED_REGIONS (INIT_MEMBLOCK_REGIONS + NR_CPUS + 1)
386 #endif
387
388 #include <asm-generic/memory_model.h>
389
390 #endif /* __ASM_MEMORY_H */
391