1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * pm.h - Power management interface
4 *
5 * Copyright (C) 2000 Andrew Henroid
6 */
7
8 #ifndef _LINUX_PM_H
9 #define _LINUX_PM_H
10
11 #include <linux/list.h>
12 #include <linux/workqueue.h>
13 #include <linux/spinlock.h>
14 #include <linux/wait.h>
15 #include <linux/timer.h>
16 #include <linux/hrtimer.h>
17 #include <linux/completion.h>
18 #include <linux/android_kabi.h>
19
20 /*
21 * Callbacks for platform drivers to implement.
22 */
23 extern void (*pm_power_off)(void);
24 extern void (*pm_power_off_prepare)(void);
25
26 struct device; /* we have a circular dep with device.h */
27 #ifdef CONFIG_VT_CONSOLE_SLEEP
28 extern void pm_vt_switch_required(struct device *dev, bool required);
29 extern void pm_vt_switch_unregister(struct device *dev);
30 #else
pm_vt_switch_required(struct device * dev,bool required)31 static inline void pm_vt_switch_required(struct device *dev, bool required)
32 {
33 }
pm_vt_switch_unregister(struct device * dev)34 static inline void pm_vt_switch_unregister(struct device *dev)
35 {
36 }
37 #endif /* CONFIG_VT_CONSOLE_SLEEP */
38
39 /*
40 * Device power management
41 */
42
43
44 #ifdef CONFIG_PM
45 extern const char power_group_name[]; /* = "power" */
46 #else
47 #define power_group_name NULL
48 #endif
49
50 typedef struct pm_message {
51 int event;
52 } pm_message_t;
53
54 /**
55 * struct dev_pm_ops - device PM callbacks.
56 *
57 * @prepare: The principal role of this callback is to prevent new children of
58 * the device from being registered after it has returned (the driver's
59 * subsystem and generally the rest of the kernel is supposed to prevent
60 * new calls to the probe method from being made too once @prepare() has
61 * succeeded). If @prepare() detects a situation it cannot handle (e.g.
62 * registration of a child already in progress), it may return -EAGAIN, so
63 * that the PM core can execute it once again (e.g. after a new child has
64 * been registered) to recover from the race condition.
65 * This method is executed for all kinds of suspend transitions and is
66 * followed by one of the suspend callbacks: @suspend(), @freeze(), or
67 * @poweroff(). If the transition is a suspend to memory or standby (that
68 * is, not related to hibernation), the return value of @prepare() may be
69 * used to indicate to the PM core to leave the device in runtime suspend
70 * if applicable. Namely, if @prepare() returns a positive number, the PM
71 * core will understand that as a declaration that the device appears to be
72 * runtime-suspended and it may be left in that state during the entire
73 * transition and during the subsequent resume if all of its descendants
74 * are left in runtime suspend too. If that happens, @complete() will be
75 * executed directly after @prepare() and it must ensure the proper
76 * functioning of the device after the system resume.
77 * The PM core executes subsystem-level @prepare() for all devices before
78 * starting to invoke suspend callbacks for any of them, so generally
79 * devices may be assumed to be functional or to respond to runtime resume
80 * requests while @prepare() is being executed. However, device drivers
81 * may NOT assume anything about the availability of user space at that
82 * time and it is NOT valid to request firmware from within @prepare()
83 * (it's too late to do that). It also is NOT valid to allocate
84 * substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
85 * [To work around these limitations, drivers may register suspend and
86 * hibernation notifiers to be executed before the freezing of tasks.]
87 *
88 * @complete: Undo the changes made by @prepare(). This method is executed for
89 * all kinds of resume transitions, following one of the resume callbacks:
90 * @resume(), @thaw(), @restore(). Also called if the state transition
91 * fails before the driver's suspend callback: @suspend(), @freeze() or
92 * @poweroff(), can be executed (e.g. if the suspend callback fails for one
93 * of the other devices that the PM core has unsuccessfully attempted to
94 * suspend earlier).
95 * The PM core executes subsystem-level @complete() after it has executed
96 * the appropriate resume callbacks for all devices. If the corresponding
97 * @prepare() at the beginning of the suspend transition returned a
98 * positive number and the device was left in runtime suspend (without
99 * executing any suspend and resume callbacks for it), @complete() will be
100 * the only callback executed for the device during resume. In that case,
101 * @complete() must be prepared to do whatever is necessary to ensure the
102 * proper functioning of the device after the system resume. To this end,
103 * @complete() can check the power.direct_complete flag of the device to
104 * learn whether (unset) or not (set) the previous suspend and resume
105 * callbacks have been executed for it.
106 *
107 * @suspend: Executed before putting the system into a sleep state in which the
108 * contents of main memory are preserved. The exact action to perform
109 * depends on the device's subsystem (PM domain, device type, class or bus
110 * type), but generally the device must be quiescent after subsystem-level
111 * @suspend() has returned, so that it doesn't do any I/O or DMA.
112 * Subsystem-level @suspend() is executed for all devices after invoking
113 * subsystem-level @prepare() for all of them.
114 *
115 * @suspend_late: Continue operations started by @suspend(). For a number of
116 * devices @suspend_late() may point to the same callback routine as the
117 * runtime suspend callback.
118 *
119 * @resume: Executed after waking the system up from a sleep state in which the
120 * contents of main memory were preserved. The exact action to perform
121 * depends on the device's subsystem, but generally the driver is expected
122 * to start working again, responding to hardware events and software
123 * requests (the device itself may be left in a low-power state, waiting
124 * for a runtime resume to occur). The state of the device at the time its
125 * driver's @resume() callback is run depends on the platform and subsystem
126 * the device belongs to. On most platforms, there are no restrictions on
127 * availability of resources like clocks during @resume().
128 * Subsystem-level @resume() is executed for all devices after invoking
129 * subsystem-level @resume_noirq() for all of them.
130 *
131 * @resume_early: Prepare to execute @resume(). For a number of devices
132 * @resume_early() may point to the same callback routine as the runtime
133 * resume callback.
134 *
135 * @freeze: Hibernation-specific, executed before creating a hibernation image.
136 * Analogous to @suspend(), but it should not enable the device to signal
137 * wakeup events or change its power state. The majority of subsystems
138 * (with the notable exception of the PCI bus type) expect the driver-level
139 * @freeze() to save the device settings in memory to be used by @restore()
140 * during the subsequent resume from hibernation.
141 * Subsystem-level @freeze() is executed for all devices after invoking
142 * subsystem-level @prepare() for all of them.
143 *
144 * @freeze_late: Continue operations started by @freeze(). Analogous to
145 * @suspend_late(), but it should not enable the device to signal wakeup
146 * events or change its power state.
147 *
148 * @thaw: Hibernation-specific, executed after creating a hibernation image OR
149 * if the creation of an image has failed. Also executed after a failing
150 * attempt to restore the contents of main memory from such an image.
151 * Undo the changes made by the preceding @freeze(), so the device can be
152 * operated in the same way as immediately before the call to @freeze().
153 * Subsystem-level @thaw() is executed for all devices after invoking
154 * subsystem-level @thaw_noirq() for all of them. It also may be executed
155 * directly after @freeze() in case of a transition error.
156 *
157 * @thaw_early: Prepare to execute @thaw(). Undo the changes made by the
158 * preceding @freeze_late().
159 *
160 * @poweroff: Hibernation-specific, executed after saving a hibernation image.
161 * Analogous to @suspend(), but it need not save the device's settings in
162 * memory.
163 * Subsystem-level @poweroff() is executed for all devices after invoking
164 * subsystem-level @prepare() for all of them.
165 *
166 * @poweroff_late: Continue operations started by @poweroff(). Analogous to
167 * @suspend_late(), but it need not save the device's settings in memory.
168 *
169 * @restore: Hibernation-specific, executed after restoring the contents of main
170 * memory from a hibernation image, analogous to @resume().
171 *
172 * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
173 *
174 * @suspend_noirq: Complete the actions started by @suspend(). Carry out any
175 * additional operations required for suspending the device that might be
176 * racing with its driver's interrupt handler, which is guaranteed not to
177 * run while @suspend_noirq() is being executed.
178 * It generally is expected that the device will be in a low-power state
179 * (appropriate for the target system sleep state) after subsystem-level
180 * @suspend_noirq() has returned successfully. If the device can generate
181 * system wakeup signals and is enabled to wake up the system, it should be
182 * configured to do so at that time. However, depending on the platform
183 * and device's subsystem, @suspend() or @suspend_late() may be allowed to
184 * put the device into the low-power state and configure it to generate
185 * wakeup signals, in which case it generally is not necessary to define
186 * @suspend_noirq().
187 *
188 * @resume_noirq: Prepare for the execution of @resume() by carrying out any
189 * operations required for resuming the device that might be racing with
190 * its driver's interrupt handler, which is guaranteed not to run while
191 * @resume_noirq() is being executed.
192 *
193 * @freeze_noirq: Complete the actions started by @freeze(). Carry out any
194 * additional operations required for freezing the device that might be
195 * racing with its driver's interrupt handler, which is guaranteed not to
196 * run while @freeze_noirq() is being executed.
197 * The power state of the device should not be changed by either @freeze(),
198 * or @freeze_late(), or @freeze_noirq() and it should not be configured to
199 * signal system wakeup by any of these callbacks.
200 *
201 * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
202 * operations required for thawing the device that might be racing with its
203 * driver's interrupt handler, which is guaranteed not to run while
204 * @thaw_noirq() is being executed.
205 *
206 * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to
207 * @suspend_noirq(), but it need not save the device's settings in memory.
208 *
209 * @restore_noirq: Prepare for the execution of @restore() by carrying out any
210 * operations required for thawing the device that might be racing with its
211 * driver's interrupt handler, which is guaranteed not to run while
212 * @restore_noirq() is being executed. Analogous to @resume_noirq().
213 *
214 * @runtime_suspend: Prepare the device for a condition in which it won't be
215 * able to communicate with the CPU(s) and RAM due to power management.
216 * This need not mean that the device should be put into a low-power state.
217 * For example, if the device is behind a link which is about to be turned
218 * off, the device may remain at full power. If the device does go to low
219 * power and is capable of generating runtime wakeup events, remote wakeup
220 * (i.e., a hardware mechanism allowing the device to request a change of
221 * its power state via an interrupt) should be enabled for it.
222 *
223 * @runtime_resume: Put the device into the fully active state in response to a
224 * wakeup event generated by hardware or at the request of software. If
225 * necessary, put the device into the full-power state and restore its
226 * registers, so that it is fully operational.
227 *
228 * @runtime_idle: Device appears to be inactive and it might be put into a
229 * low-power state if all of the necessary conditions are satisfied.
230 * Check these conditions, and return 0 if it's appropriate to let the PM
231 * core queue a suspend request for the device.
232 *
233 * Several device power state transitions are externally visible, affecting
234 * the state of pending I/O queues and (for drivers that touch hardware)
235 * interrupts, wakeups, DMA, and other hardware state. There may also be
236 * internal transitions to various low-power modes which are transparent
237 * to the rest of the driver stack (such as a driver that's ON gating off
238 * clocks which are not in active use).
239 *
240 * The externally visible transitions are handled with the help of callbacks
241 * included in this structure in such a way that, typically, two levels of
242 * callbacks are involved. First, the PM core executes callbacks provided by PM
243 * domains, device types, classes and bus types. They are the subsystem-level
244 * callbacks expected to execute callbacks provided by device drivers, although
245 * they may choose not to do that. If the driver callbacks are executed, they
246 * have to collaborate with the subsystem-level callbacks to achieve the goals
247 * appropriate for the given system transition, given transition phase and the
248 * subsystem the device belongs to.
249 *
250 * All of the above callbacks, except for @complete(), return error codes.
251 * However, the error codes returned by @resume(), @thaw(), @restore(),
252 * @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do not cause the PM
253 * core to abort the resume transition during which they are returned. The
254 * error codes returned in those cases are only printed to the system logs for
255 * debugging purposes. Still, it is recommended that drivers only return error
256 * codes from their resume methods in case of an unrecoverable failure (i.e.
257 * when the device being handled refuses to resume and becomes unusable) to
258 * allow the PM core to be modified in the future, so that it can avoid
259 * attempting to handle devices that failed to resume and their children.
260 *
261 * It is allowed to unregister devices while the above callbacks are being
262 * executed. However, a callback routine MUST NOT try to unregister the device
263 * it was called for, although it may unregister children of that device (for
264 * example, if it detects that a child was unplugged while the system was
265 * asleep).
266 *
267 * There also are callbacks related to runtime power management of devices.
268 * Again, as a rule these callbacks are executed by the PM core for subsystems
269 * (PM domains, device types, classes and bus types) and the subsystem-level
270 * callbacks are expected to invoke the driver callbacks. Moreover, the exact
271 * actions to be performed by a device driver's callbacks generally depend on
272 * the platform and subsystem the device belongs to.
273 *
274 * Refer to Documentation/power/runtime_pm.rst for more information about the
275 * role of the @runtime_suspend(), @runtime_resume() and @runtime_idle()
276 * callbacks in device runtime power management.
277 */
278 struct dev_pm_ops {
279 int (*prepare)(struct device *dev);
280 void (*complete)(struct device *dev);
281 int (*suspend)(struct device *dev);
282 int (*resume)(struct device *dev);
283 int (*freeze)(struct device *dev);
284 int (*thaw)(struct device *dev);
285 int (*poweroff)(struct device *dev);
286 int (*restore)(struct device *dev);
287 int (*suspend_late)(struct device *dev);
288 int (*resume_early)(struct device *dev);
289 int (*freeze_late)(struct device *dev);
290 int (*thaw_early)(struct device *dev);
291 int (*poweroff_late)(struct device *dev);
292 int (*restore_early)(struct device *dev);
293 int (*suspend_noirq)(struct device *dev);
294 int (*resume_noirq)(struct device *dev);
295 int (*freeze_noirq)(struct device *dev);
296 int (*thaw_noirq)(struct device *dev);
297 int (*poweroff_noirq)(struct device *dev);
298 int (*restore_noirq)(struct device *dev);
299 int (*runtime_suspend)(struct device *dev);
300 int (*runtime_resume)(struct device *dev);
301 int (*runtime_idle)(struct device *dev);
302
303 ANDROID_KABI_RESERVE(1);
304 };
305
306 #define SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
307 .suspend = pm_sleep_ptr(suspend_fn), \
308 .resume = pm_sleep_ptr(resume_fn), \
309 .freeze = pm_sleep_ptr(suspend_fn), \
310 .thaw = pm_sleep_ptr(resume_fn), \
311 .poweroff = pm_sleep_ptr(suspend_fn), \
312 .restore = pm_sleep_ptr(resume_fn),
313
314 #define LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
315 .suspend_late = pm_sleep_ptr(suspend_fn), \
316 .resume_early = pm_sleep_ptr(resume_fn), \
317 .freeze_late = pm_sleep_ptr(suspend_fn), \
318 .thaw_early = pm_sleep_ptr(resume_fn), \
319 .poweroff_late = pm_sleep_ptr(suspend_fn), \
320 .restore_early = pm_sleep_ptr(resume_fn),
321
322 #define NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
323 .suspend_noirq = pm_sleep_ptr(suspend_fn), \
324 .resume_noirq = pm_sleep_ptr(resume_fn), \
325 .freeze_noirq = pm_sleep_ptr(suspend_fn), \
326 .thaw_noirq = pm_sleep_ptr(resume_fn), \
327 .poweroff_noirq = pm_sleep_ptr(suspend_fn), \
328 .restore_noirq = pm_sleep_ptr(resume_fn),
329
330 #define RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
331 .runtime_suspend = suspend_fn, \
332 .runtime_resume = resume_fn, \
333 .runtime_idle = idle_fn,
334
335 #ifdef CONFIG_PM_SLEEP
336 #define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
337 SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
338 #else
339 #define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
340 #endif
341
342 #ifdef CONFIG_PM_SLEEP
343 #define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
344 LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
345 #else
346 #define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
347 #endif
348
349 #ifdef CONFIG_PM_SLEEP
350 #define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
351 NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
352 #else
353 #define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
354 #endif
355
356 #ifdef CONFIG_PM
357 #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
358 RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
359 #else
360 #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
361 #endif
362
363 /*
364 * Use this if you want to use the same suspend and resume callbacks for suspend
365 * to RAM and hibernation.
366 */
367 #define DEFINE_SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
368 const struct dev_pm_ops name = { \
369 SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
370 }
371
372 /*
373 * Use this for defining a set of PM operations to be used in all situations
374 * (system suspend, hibernation or runtime PM).
375 * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
376 * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
377 * and .runtime_resume(), because .runtime_suspend() always works on an already
378 * quiescent device, while .suspend() should assume that the device may be doing
379 * something when it is called (it should ensure that the device will be
380 * quiescent after it has returned). Therefore it's better to point the "late"
381 * suspend and "early" resume callback pointers, .suspend_late() and
382 * .resume_early(), to the same routines as .runtime_suspend() and
383 * .runtime_resume(), respectively (and analogously for hibernation).
384 */
385 #define DEFINE_UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
386 static const struct dev_pm_ops name = { \
387 SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
388 RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
389 }
390
391 /* Deprecated. Use DEFINE_SIMPLE_DEV_PM_OPS() instead. */
392 #define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
393 const struct dev_pm_ops __maybe_unused name = { \
394 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
395 }
396
397 /* Deprecated. Use DEFINE_UNIVERSAL_DEV_PM_OPS() instead. */
398 #define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
399 const struct dev_pm_ops __maybe_unused name = { \
400 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
401 SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
402 }
403
404 #define pm_ptr(_ptr) PTR_IF(IS_ENABLED(CONFIG_PM), (_ptr))
405 #define pm_sleep_ptr(_ptr) PTR_IF(IS_ENABLED(CONFIG_PM_SLEEP), (_ptr))
406
407 /*
408 * PM_EVENT_ messages
409 *
410 * The following PM_EVENT_ messages are defined for the internal use of the PM
411 * core, in order to provide a mechanism allowing the high level suspend and
412 * hibernation code to convey the necessary information to the device PM core
413 * code:
414 *
415 * ON No transition.
416 *
417 * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
418 * for all devices.
419 *
420 * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
421 * for all devices.
422 *
423 * HIBERNATE Hibernation image has been saved, call ->prepare() and
424 * ->poweroff() for all devices.
425 *
426 * QUIESCE Contents of main memory are going to be restored from a (loaded)
427 * hibernation image, call ->prepare() and ->freeze() for all
428 * devices.
429 *
430 * RESUME System is resuming, call ->resume() and ->complete() for all
431 * devices.
432 *
433 * THAW Hibernation image has been created, call ->thaw() and
434 * ->complete() for all devices.
435 *
436 * RESTORE Contents of main memory have been restored from a hibernation
437 * image, call ->restore() and ->complete() for all devices.
438 *
439 * RECOVER Creation of a hibernation image or restoration of the main
440 * memory contents from a hibernation image has failed, call
441 * ->thaw() and ->complete() for all devices.
442 *
443 * The following PM_EVENT_ messages are defined for internal use by
444 * kernel subsystems. They are never issued by the PM core.
445 *
446 * USER_SUSPEND Manual selective suspend was issued by userspace.
447 *
448 * USER_RESUME Manual selective resume was issued by userspace.
449 *
450 * REMOTE_WAKEUP Remote-wakeup request was received from the device.
451 *
452 * AUTO_SUSPEND Automatic (device idle) runtime suspend was
453 * initiated by the subsystem.
454 *
455 * AUTO_RESUME Automatic (device needed) runtime resume was
456 * requested by a driver.
457 */
458
459 #define PM_EVENT_INVALID (-1)
460 #define PM_EVENT_ON 0x0000
461 #define PM_EVENT_FREEZE 0x0001
462 #define PM_EVENT_SUSPEND 0x0002
463 #define PM_EVENT_HIBERNATE 0x0004
464 #define PM_EVENT_QUIESCE 0x0008
465 #define PM_EVENT_RESUME 0x0010
466 #define PM_EVENT_THAW 0x0020
467 #define PM_EVENT_RESTORE 0x0040
468 #define PM_EVENT_RECOVER 0x0080
469 #define PM_EVENT_USER 0x0100
470 #define PM_EVENT_REMOTE 0x0200
471 #define PM_EVENT_AUTO 0x0400
472
473 #define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
474 #define PM_EVENT_USER_SUSPEND (PM_EVENT_USER | PM_EVENT_SUSPEND)
475 #define PM_EVENT_USER_RESUME (PM_EVENT_USER | PM_EVENT_RESUME)
476 #define PM_EVENT_REMOTE_RESUME (PM_EVENT_REMOTE | PM_EVENT_RESUME)
477 #define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND)
478 #define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME)
479
480 #define PMSG_INVALID ((struct pm_message){ .event = PM_EVENT_INVALID, })
481 #define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
482 #define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
483 #define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
484 #define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
485 #define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
486 #define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
487 #define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
488 #define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
489 #define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
490 #define PMSG_USER_SUSPEND ((struct pm_message) \
491 { .event = PM_EVENT_USER_SUSPEND, })
492 #define PMSG_USER_RESUME ((struct pm_message) \
493 { .event = PM_EVENT_USER_RESUME, })
494 #define PMSG_REMOTE_RESUME ((struct pm_message) \
495 { .event = PM_EVENT_REMOTE_RESUME, })
496 #define PMSG_AUTO_SUSPEND ((struct pm_message) \
497 { .event = PM_EVENT_AUTO_SUSPEND, })
498 #define PMSG_AUTO_RESUME ((struct pm_message) \
499 { .event = PM_EVENT_AUTO_RESUME, })
500
501 #define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0)
502
503 /*
504 * Device run-time power management status.
505 *
506 * These status labels are used internally by the PM core to indicate the
507 * current status of a device with respect to the PM core operations. They do
508 * not reflect the actual power state of the device or its status as seen by the
509 * driver.
510 *
511 * RPM_ACTIVE Device is fully operational. Indicates that the device
512 * bus type's ->runtime_resume() callback has completed
513 * successfully.
514 *
515 * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has
516 * completed successfully. The device is regarded as
517 * suspended.
518 *
519 * RPM_RESUMING Device bus type's ->runtime_resume() callback is being
520 * executed.
521 *
522 * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being
523 * executed.
524 */
525
526 enum rpm_status {
527 RPM_ACTIVE = 0,
528 RPM_RESUMING,
529 RPM_SUSPENDED,
530 RPM_SUSPENDING,
531 };
532
533 /*
534 * Device run-time power management request types.
535 *
536 * RPM_REQ_NONE Do nothing.
537 *
538 * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback
539 *
540 * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback
541 *
542 * RPM_REQ_AUTOSUSPEND Same as RPM_REQ_SUSPEND, but not until the device has
543 * been inactive for as long as power.autosuspend_delay
544 *
545 * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback
546 */
547
548 enum rpm_request {
549 RPM_REQ_NONE = 0,
550 RPM_REQ_IDLE,
551 RPM_REQ_SUSPEND,
552 RPM_REQ_AUTOSUSPEND,
553 RPM_REQ_RESUME,
554 };
555
556 struct wakeup_source;
557 struct wake_irq;
558 struct pm_domain_data;
559
560 struct pm_subsys_data {
561 spinlock_t lock;
562 unsigned int refcount;
563 #ifdef CONFIG_PM_CLK
564 unsigned int clock_op_might_sleep;
565 struct mutex clock_mutex;
566 struct list_head clock_list;
567 #endif
568 #ifdef CONFIG_PM_GENERIC_DOMAINS
569 struct pm_domain_data *domain_data;
570 #endif
571 };
572
573 /*
574 * Driver flags to control system suspend/resume behavior.
575 *
576 * These flags can be set by device drivers at the probe time. They need not be
577 * cleared by the drivers as the driver core will take care of that.
578 *
579 * NO_DIRECT_COMPLETE: Do not apply direct-complete optimization to the device.
580 * SMART_PREPARE: Take the driver ->prepare callback return value into account.
581 * SMART_SUSPEND: Avoid resuming the device from runtime suspend.
582 * MAY_SKIP_RESUME: Allow driver "noirq" and "early" callbacks to be skipped.
583 *
584 * See Documentation/driver-api/pm/devices.rst for details.
585 */
586 #define DPM_FLAG_NO_DIRECT_COMPLETE BIT(0)
587 #define DPM_FLAG_SMART_PREPARE BIT(1)
588 #define DPM_FLAG_SMART_SUSPEND BIT(2)
589 #define DPM_FLAG_MAY_SKIP_RESUME BIT(3)
590
591 struct dev_pm_info {
592 pm_message_t power_state;
593 unsigned int can_wakeup:1;
594 unsigned int async_suspend:1;
595 bool in_dpm_list:1; /* Owned by the PM core */
596 bool is_prepared:1; /* Owned by the PM core */
597 bool is_suspended:1; /* Ditto */
598 bool is_noirq_suspended:1;
599 bool is_late_suspended:1;
600 bool no_pm:1;
601 bool early_init:1; /* Owned by the PM core */
602 bool direct_complete:1; /* Owned by the PM core */
603 u32 driver_flags;
604 spinlock_t lock;
605 #ifdef CONFIG_PM_SLEEP
606 struct list_head entry;
607 struct completion completion;
608 struct wakeup_source *wakeup;
609 bool wakeup_path:1;
610 bool syscore:1;
611 bool no_pm_callbacks:1; /* Owned by the PM core */
612 unsigned int must_resume:1; /* Owned by the PM core */
613 unsigned int may_skip_resume:1; /* Set by subsystems */
614 #else
615 unsigned int should_wakeup:1;
616 #endif
617 #ifdef CONFIG_PM
618 struct hrtimer suspend_timer;
619 u64 timer_expires;
620 struct work_struct work;
621 wait_queue_head_t wait_queue;
622 struct wake_irq *wakeirq;
623 atomic_t usage_count;
624 atomic_t child_count;
625 unsigned int disable_depth:3;
626 unsigned int idle_notification:1;
627 unsigned int request_pending:1;
628 unsigned int deferred_resume:1;
629 unsigned int needs_force_resume:1;
630 unsigned int runtime_auto:1;
631 bool ignore_children:1;
632 unsigned int no_callbacks:1;
633 unsigned int irq_safe:1;
634 unsigned int use_autosuspend:1;
635 unsigned int timer_autosuspends:1;
636 unsigned int memalloc_noio:1;
637 unsigned int links_count;
638 enum rpm_request request;
639 enum rpm_status runtime_status;
640 int runtime_error;
641 int autosuspend_delay;
642 u64 last_busy;
643 u64 active_time;
644 u64 suspended_time;
645 u64 accounting_timestamp;
646 #endif
647 struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
648 void (*set_latency_tolerance)(struct device *, s32);
649 struct dev_pm_qos *qos;
650
651 ANDROID_KABI_RESERVE(1);
652 ANDROID_KABI_RESERVE(2);
653 };
654
655 extern int dev_pm_get_subsys_data(struct device *dev);
656 extern void dev_pm_put_subsys_data(struct device *dev);
657
658 /**
659 * struct dev_pm_domain - power management domain representation.
660 *
661 * @ops: Power management operations associated with this domain.
662 * @start: Called when a user needs to start the device via the domain.
663 * @detach: Called when removing a device from the domain.
664 * @activate: Called before executing probe routines for bus types and drivers.
665 * @sync: Called after successful driver probe.
666 * @dismiss: Called after unsuccessful driver probe and after driver removal.
667 *
668 * Power domains provide callbacks that are executed during system suspend,
669 * hibernation, system resume and during runtime PM transitions instead of
670 * subsystem-level and driver-level callbacks.
671 */
672 struct dev_pm_domain {
673 struct dev_pm_ops ops;
674 int (*start)(struct device *dev);
675 void (*detach)(struct device *dev, bool power_off);
676 int (*activate)(struct device *dev);
677 void (*sync)(struct device *dev);
678 void (*dismiss)(struct device *dev);
679
680 ANDROID_KABI_RESERVE(1);
681 };
682
683 /*
684 * The PM_EVENT_ messages are also used by drivers implementing the legacy
685 * suspend framework, based on the ->suspend() and ->resume() callbacks common
686 * for suspend and hibernation transitions, according to the rules below.
687 */
688
689 /* Necessary, because several drivers use PM_EVENT_PRETHAW */
690 #define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
691
692 /*
693 * One transition is triggered by resume(), after a suspend() call; the
694 * message is implicit:
695 *
696 * ON Driver starts working again, responding to hardware events
697 * and software requests. The hardware may have gone through
698 * a power-off reset, or it may have maintained state from the
699 * previous suspend() which the driver will rely on while
700 * resuming. On most platforms, there are no restrictions on
701 * availability of resources like clocks during resume().
702 *
703 * Other transitions are triggered by messages sent using suspend(). All
704 * these transitions quiesce the driver, so that I/O queues are inactive.
705 * That commonly entails turning off IRQs and DMA; there may be rules
706 * about how to quiesce that are specific to the bus or the device's type.
707 * (For example, network drivers mark the link state.) Other details may
708 * differ according to the message:
709 *
710 * SUSPEND Quiesce, enter a low power device state appropriate for
711 * the upcoming system state (such as PCI_D3hot), and enable
712 * wakeup events as appropriate.
713 *
714 * HIBERNATE Enter a low power device state appropriate for the hibernation
715 * state (eg. ACPI S4) and enable wakeup events as appropriate.
716 *
717 * FREEZE Quiesce operations so that a consistent image can be saved;
718 * but do NOT otherwise enter a low power device state, and do
719 * NOT emit system wakeup events.
720 *
721 * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
722 * the system from a snapshot taken after an earlier FREEZE.
723 * Some drivers will need to reset their hardware state instead
724 * of preserving it, to ensure that it's never mistaken for the
725 * state which that earlier snapshot had set up.
726 *
727 * A minimally power-aware driver treats all messages as SUSPEND, fully
728 * reinitializes its device during resume() -- whether or not it was reset
729 * during the suspend/resume cycle -- and can't issue wakeup events.
730 *
731 * More power-aware drivers may also use low power states at runtime as
732 * well as during system sleep states like PM_SUSPEND_STANDBY. They may
733 * be able to use wakeup events to exit from runtime low-power states,
734 * or from system low-power states such as standby or suspend-to-RAM.
735 */
736
737 #ifdef CONFIG_PM_SLEEP
738 extern void device_pm_lock(void);
739 extern void dpm_resume_start(pm_message_t state);
740 extern void dpm_resume_end(pm_message_t state);
741 extern void dpm_resume_noirq(pm_message_t state);
742 extern void dpm_resume_early(pm_message_t state);
743 extern void dpm_resume(pm_message_t state);
744 extern void dpm_complete(pm_message_t state);
745
746 extern void device_pm_unlock(void);
747 extern int dpm_suspend_end(pm_message_t state);
748 extern int dpm_suspend_start(pm_message_t state);
749 extern int dpm_suspend_noirq(pm_message_t state);
750 extern int dpm_suspend_late(pm_message_t state);
751 extern int dpm_suspend(pm_message_t state);
752 extern int dpm_prepare(pm_message_t state);
753
754 extern void __suspend_report_result(const char *function, void *fn, int ret);
755
756 #define suspend_report_result(fn, ret) \
757 do { \
758 __suspend_report_result(__func__, fn, ret); \
759 } while (0)
760
761 extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
762 extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *));
763
764 extern int pm_generic_prepare(struct device *dev);
765 extern int pm_generic_suspend_late(struct device *dev);
766 extern int pm_generic_suspend_noirq(struct device *dev);
767 extern int pm_generic_suspend(struct device *dev);
768 extern int pm_generic_resume_early(struct device *dev);
769 extern int pm_generic_resume_noirq(struct device *dev);
770 extern int pm_generic_resume(struct device *dev);
771 extern int pm_generic_freeze_noirq(struct device *dev);
772 extern int pm_generic_freeze_late(struct device *dev);
773 extern int pm_generic_freeze(struct device *dev);
774 extern int pm_generic_thaw_noirq(struct device *dev);
775 extern int pm_generic_thaw_early(struct device *dev);
776 extern int pm_generic_thaw(struct device *dev);
777 extern int pm_generic_restore_noirq(struct device *dev);
778 extern int pm_generic_restore_early(struct device *dev);
779 extern int pm_generic_restore(struct device *dev);
780 extern int pm_generic_poweroff_noirq(struct device *dev);
781 extern int pm_generic_poweroff_late(struct device *dev);
782 extern int pm_generic_poweroff(struct device *dev);
783 extern void pm_generic_complete(struct device *dev);
784
785 extern bool dev_pm_skip_resume(struct device *dev);
786 extern bool dev_pm_skip_suspend(struct device *dev);
787
788 #else /* !CONFIG_PM_SLEEP */
789
790 #define device_pm_lock() do {} while (0)
791 #define device_pm_unlock() do {} while (0)
792
dpm_suspend_start(pm_message_t state)793 static inline int dpm_suspend_start(pm_message_t state)
794 {
795 return 0;
796 }
797
798 #define suspend_report_result(fn, ret) do {} while (0)
799
device_pm_wait_for_dev(struct device * a,struct device * b)800 static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
801 {
802 return 0;
803 }
804
dpm_for_each_dev(void * data,void (* fn)(struct device *,void *))805 static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *))
806 {
807 }
808
809 #define pm_generic_prepare NULL
810 #define pm_generic_suspend_late NULL
811 #define pm_generic_suspend_noirq NULL
812 #define pm_generic_suspend NULL
813 #define pm_generic_resume_early NULL
814 #define pm_generic_resume_noirq NULL
815 #define pm_generic_resume NULL
816 #define pm_generic_freeze_noirq NULL
817 #define pm_generic_freeze_late NULL
818 #define pm_generic_freeze NULL
819 #define pm_generic_thaw_noirq NULL
820 #define pm_generic_thaw_early NULL
821 #define pm_generic_thaw NULL
822 #define pm_generic_restore_noirq NULL
823 #define pm_generic_restore_early NULL
824 #define pm_generic_restore NULL
825 #define pm_generic_poweroff_noirq NULL
826 #define pm_generic_poweroff_late NULL
827 #define pm_generic_poweroff NULL
828 #define pm_generic_complete NULL
829 #endif /* !CONFIG_PM_SLEEP */
830
831 /* How to reorder dpm_list after device_move() */
832 enum dpm_order {
833 DPM_ORDER_NONE,
834 DPM_ORDER_DEV_AFTER_PARENT,
835 DPM_ORDER_PARENT_BEFORE_DEV,
836 DPM_ORDER_DEV_LAST,
837 };
838
839 #endif /* _LINUX_PM_H */
840