1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/mmc/host/pxa.c - PXA MMCI driver
4 *
5 * Copyright (C) 2003 Russell King, All Rights Reserved.
6 *
7 * This hardware is really sick:
8 * - No way to clear interrupts.
9 * - Have to turn off the clock whenever we touch the device.
10 * - Doesn't tell you how many data blocks were transferred.
11 * Yuck!
12 *
13 * 1 and 3 byte data transfers not supported
14 * max block length up to 1023
15 */
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/ioport.h>
19 #include <linux/platform_device.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dmaengine.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/clk.h>
25 #include <linux/err.h>
26 #include <linux/mmc/host.h>
27 #include <linux/mmc/slot-gpio.h>
28 #include <linux/io.h>
29 #include <linux/regulator/consumer.h>
30 #include <linux/gpio/consumer.h>
31 #include <linux/gfp.h>
32 #include <linux/of.h>
33 #include <linux/of_device.h>
34
35 #include <linux/sizes.h>
36
37 #include <mach/hardware.h>
38 #include <linux/platform_data/mmc-pxamci.h>
39
40 #include "pxamci.h"
41
42 #define DRIVER_NAME "pxa2xx-mci"
43
44 #define NR_SG 1
45 #define CLKRT_OFF (~0)
46
47 #define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
48 || cpu_is_pxa935())
49
50 struct pxamci_host {
51 struct mmc_host *mmc;
52 spinlock_t lock;
53 struct resource *res;
54 void __iomem *base;
55 struct clk *clk;
56 unsigned long clkrate;
57 unsigned int clkrt;
58 unsigned int cmdat;
59 unsigned int imask;
60 unsigned int power_mode;
61 unsigned long detect_delay_ms;
62 bool use_ro_gpio;
63 struct gpio_desc *power;
64 struct pxamci_platform_data *pdata;
65
66 struct mmc_request *mrq;
67 struct mmc_command *cmd;
68 struct mmc_data *data;
69
70 struct dma_chan *dma_chan_rx;
71 struct dma_chan *dma_chan_tx;
72 dma_cookie_t dma_cookie;
73 unsigned int dma_len;
74 unsigned int dma_dir;
75 };
76
pxamci_init_ocr(struct pxamci_host * host)77 static int pxamci_init_ocr(struct pxamci_host *host)
78 {
79 struct mmc_host *mmc = host->mmc;
80 int ret;
81
82 ret = mmc_regulator_get_supply(mmc);
83 if (ret < 0)
84 return ret;
85
86 if (IS_ERR(mmc->supply.vmmc)) {
87 /* fall-back to platform data */
88 mmc->ocr_avail = host->pdata ?
89 host->pdata->ocr_mask :
90 MMC_VDD_32_33 | MMC_VDD_33_34;
91 }
92
93 return 0;
94 }
95
pxamci_set_power(struct pxamci_host * host,unsigned char power_mode,unsigned int vdd)96 static inline int pxamci_set_power(struct pxamci_host *host,
97 unsigned char power_mode,
98 unsigned int vdd)
99 {
100 struct mmc_host *mmc = host->mmc;
101 struct regulator *supply = mmc->supply.vmmc;
102
103 if (!IS_ERR(supply))
104 return mmc_regulator_set_ocr(mmc, supply, vdd);
105
106 if (host->power) {
107 bool on = !!((1 << vdd) & host->pdata->ocr_mask);
108 gpiod_set_value(host->power, on);
109 }
110
111 if (host->pdata && host->pdata->setpower)
112 return host->pdata->setpower(mmc_dev(host->mmc), vdd);
113
114 return 0;
115 }
116
pxamci_stop_clock(struct pxamci_host * host)117 static void pxamci_stop_clock(struct pxamci_host *host)
118 {
119 if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
120 unsigned long timeout = 10000;
121 unsigned int v;
122
123 writel(STOP_CLOCK, host->base + MMC_STRPCL);
124
125 do {
126 v = readl(host->base + MMC_STAT);
127 if (!(v & STAT_CLK_EN))
128 break;
129 udelay(1);
130 } while (timeout--);
131
132 if (v & STAT_CLK_EN)
133 dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
134 }
135 }
136
pxamci_enable_irq(struct pxamci_host * host,unsigned int mask)137 static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
138 {
139 unsigned long flags;
140
141 spin_lock_irqsave(&host->lock, flags);
142 host->imask &= ~mask;
143 writel(host->imask, host->base + MMC_I_MASK);
144 spin_unlock_irqrestore(&host->lock, flags);
145 }
146
pxamci_disable_irq(struct pxamci_host * host,unsigned int mask)147 static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
148 {
149 unsigned long flags;
150
151 spin_lock_irqsave(&host->lock, flags);
152 host->imask |= mask;
153 writel(host->imask, host->base + MMC_I_MASK);
154 spin_unlock_irqrestore(&host->lock, flags);
155 }
156
157 static void pxamci_dma_irq(void *param);
158
pxamci_setup_data(struct pxamci_host * host,struct mmc_data * data)159 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
160 {
161 struct dma_async_tx_descriptor *tx;
162 enum dma_transfer_direction direction;
163 struct dma_slave_config config;
164 struct dma_chan *chan;
165 unsigned int nob = data->blocks;
166 unsigned long long clks;
167 unsigned int timeout;
168 int ret;
169
170 host->data = data;
171
172 writel(nob, host->base + MMC_NOB);
173 writel(data->blksz, host->base + MMC_BLKLEN);
174
175 clks = (unsigned long long)data->timeout_ns * host->clkrate;
176 do_div(clks, 1000000000UL);
177 timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
178 writel((timeout + 255) / 256, host->base + MMC_RDTO);
179
180 memset(&config, 0, sizeof(config));
181 config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
182 config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
183 config.src_addr = host->res->start + MMC_RXFIFO;
184 config.dst_addr = host->res->start + MMC_TXFIFO;
185 config.src_maxburst = 32;
186 config.dst_maxburst = 32;
187
188 if (data->flags & MMC_DATA_READ) {
189 host->dma_dir = DMA_FROM_DEVICE;
190 direction = DMA_DEV_TO_MEM;
191 chan = host->dma_chan_rx;
192 } else {
193 host->dma_dir = DMA_TO_DEVICE;
194 direction = DMA_MEM_TO_DEV;
195 chan = host->dma_chan_tx;
196 }
197
198 config.direction = direction;
199
200 ret = dmaengine_slave_config(chan, &config);
201 if (ret < 0) {
202 dev_err(mmc_dev(host->mmc), "dma slave config failed\n");
203 return;
204 }
205
206 host->dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len,
207 host->dma_dir);
208
209 tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction,
210 DMA_PREP_INTERRUPT);
211 if (!tx) {
212 dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n");
213 return;
214 }
215
216 if (!(data->flags & MMC_DATA_READ)) {
217 tx->callback = pxamci_dma_irq;
218 tx->callback_param = host;
219 }
220
221 host->dma_cookie = dmaengine_submit(tx);
222
223 /*
224 * workaround for erratum #91:
225 * only start DMA now if we are doing a read,
226 * otherwise we wait until CMD/RESP has finished
227 * before starting DMA.
228 */
229 if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
230 dma_async_issue_pending(chan);
231 }
232
pxamci_start_cmd(struct pxamci_host * host,struct mmc_command * cmd,unsigned int cmdat)233 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
234 {
235 WARN_ON(host->cmd != NULL);
236 host->cmd = cmd;
237
238 if (cmd->flags & MMC_RSP_BUSY)
239 cmdat |= CMDAT_BUSY;
240
241 #define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
242 switch (RSP_TYPE(mmc_resp_type(cmd))) {
243 case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
244 cmdat |= CMDAT_RESP_SHORT;
245 break;
246 case RSP_TYPE(MMC_RSP_R3):
247 cmdat |= CMDAT_RESP_R3;
248 break;
249 case RSP_TYPE(MMC_RSP_R2):
250 cmdat |= CMDAT_RESP_R2;
251 break;
252 default:
253 break;
254 }
255
256 writel(cmd->opcode, host->base + MMC_CMD);
257 writel(cmd->arg >> 16, host->base + MMC_ARGH);
258 writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
259 writel(cmdat, host->base + MMC_CMDAT);
260 writel(host->clkrt, host->base + MMC_CLKRT);
261
262 writel(START_CLOCK, host->base + MMC_STRPCL);
263
264 pxamci_enable_irq(host, END_CMD_RES);
265 }
266
pxamci_finish_request(struct pxamci_host * host,struct mmc_request * mrq)267 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
268 {
269 host->mrq = NULL;
270 host->cmd = NULL;
271 host->data = NULL;
272 mmc_request_done(host->mmc, mrq);
273 }
274
pxamci_cmd_done(struct pxamci_host * host,unsigned int stat)275 static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
276 {
277 struct mmc_command *cmd = host->cmd;
278 int i;
279 u32 v;
280
281 if (!cmd)
282 return 0;
283
284 host->cmd = NULL;
285
286 /*
287 * Did I mention this is Sick. We always need to
288 * discard the upper 8 bits of the first 16-bit word.
289 */
290 v = readl(host->base + MMC_RES) & 0xffff;
291 for (i = 0; i < 4; i++) {
292 u32 w1 = readl(host->base + MMC_RES) & 0xffff;
293 u32 w2 = readl(host->base + MMC_RES) & 0xffff;
294 cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
295 v = w2;
296 }
297
298 if (stat & STAT_TIME_OUT_RESPONSE) {
299 cmd->error = -ETIMEDOUT;
300 } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
301 /*
302 * workaround for erratum #42:
303 * Intel PXA27x Family Processor Specification Update Rev 001
304 * A bogus CRC error can appear if the msb of a 136 bit
305 * response is a one.
306 */
307 if (cpu_is_pxa27x() &&
308 (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
309 pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
310 else
311 cmd->error = -EILSEQ;
312 }
313
314 pxamci_disable_irq(host, END_CMD_RES);
315 if (host->data && !cmd->error) {
316 pxamci_enable_irq(host, DATA_TRAN_DONE);
317 /*
318 * workaround for erratum #91, if doing write
319 * enable DMA late
320 */
321 if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
322 dma_async_issue_pending(host->dma_chan_tx);
323 } else {
324 pxamci_finish_request(host, host->mrq);
325 }
326
327 return 1;
328 }
329
pxamci_data_done(struct pxamci_host * host,unsigned int stat)330 static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
331 {
332 struct mmc_data *data = host->data;
333 struct dma_chan *chan;
334
335 if (!data)
336 return 0;
337
338 if (data->flags & MMC_DATA_READ)
339 chan = host->dma_chan_rx;
340 else
341 chan = host->dma_chan_tx;
342 dma_unmap_sg(chan->device->dev,
343 data->sg, data->sg_len, host->dma_dir);
344
345 if (stat & STAT_READ_TIME_OUT)
346 data->error = -ETIMEDOUT;
347 else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
348 data->error = -EILSEQ;
349
350 /*
351 * There appears to be a hardware design bug here. There seems to
352 * be no way to find out how much data was transferred to the card.
353 * This means that if there was an error on any block, we mark all
354 * data blocks as being in error.
355 */
356 if (!data->error)
357 data->bytes_xfered = data->blocks * data->blksz;
358 else
359 data->bytes_xfered = 0;
360
361 pxamci_disable_irq(host, DATA_TRAN_DONE);
362
363 host->data = NULL;
364 if (host->mrq->stop) {
365 pxamci_stop_clock(host);
366 pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
367 } else {
368 pxamci_finish_request(host, host->mrq);
369 }
370
371 return 1;
372 }
373
pxamci_irq(int irq,void * devid)374 static irqreturn_t pxamci_irq(int irq, void *devid)
375 {
376 struct pxamci_host *host = devid;
377 unsigned int ireg;
378 int handled = 0;
379
380 ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
381
382 if (ireg) {
383 unsigned stat = readl(host->base + MMC_STAT);
384
385 pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
386
387 if (ireg & END_CMD_RES)
388 handled |= pxamci_cmd_done(host, stat);
389 if (ireg & DATA_TRAN_DONE)
390 handled |= pxamci_data_done(host, stat);
391 if (ireg & SDIO_INT) {
392 mmc_signal_sdio_irq(host->mmc);
393 handled = 1;
394 }
395 }
396
397 return IRQ_RETVAL(handled);
398 }
399
pxamci_request(struct mmc_host * mmc,struct mmc_request * mrq)400 static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
401 {
402 struct pxamci_host *host = mmc_priv(mmc);
403 unsigned int cmdat;
404
405 WARN_ON(host->mrq != NULL);
406
407 host->mrq = mrq;
408
409 pxamci_stop_clock(host);
410
411 cmdat = host->cmdat;
412 host->cmdat &= ~CMDAT_INIT;
413
414 if (mrq->data) {
415 pxamci_setup_data(host, mrq->data);
416
417 cmdat &= ~CMDAT_BUSY;
418 cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
419 if (mrq->data->flags & MMC_DATA_WRITE)
420 cmdat |= CMDAT_WRITE;
421 }
422
423 pxamci_start_cmd(host, mrq->cmd, cmdat);
424 }
425
pxamci_get_ro(struct mmc_host * mmc)426 static int pxamci_get_ro(struct mmc_host *mmc)
427 {
428 struct pxamci_host *host = mmc_priv(mmc);
429
430 if (host->use_ro_gpio)
431 return mmc_gpio_get_ro(mmc);
432 if (host->pdata && host->pdata->get_ro)
433 return !!host->pdata->get_ro(mmc_dev(mmc));
434 /*
435 * Board doesn't support read only detection; let the mmc core
436 * decide what to do.
437 */
438 return -ENOSYS;
439 }
440
pxamci_set_ios(struct mmc_host * mmc,struct mmc_ios * ios)441 static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
442 {
443 struct pxamci_host *host = mmc_priv(mmc);
444
445 if (ios->clock) {
446 unsigned long rate = host->clkrate;
447 unsigned int clk = rate / ios->clock;
448
449 if (host->clkrt == CLKRT_OFF)
450 clk_prepare_enable(host->clk);
451
452 if (ios->clock == 26000000) {
453 /* to support 26MHz */
454 host->clkrt = 7;
455 } else {
456 /* to handle (19.5MHz, 26MHz) */
457 if (!clk)
458 clk = 1;
459
460 /*
461 * clk might result in a lower divisor than we
462 * desire. check for that condition and adjust
463 * as appropriate.
464 */
465 if (rate / clk > ios->clock)
466 clk <<= 1;
467 host->clkrt = fls(clk) - 1;
468 }
469
470 /*
471 * we write clkrt on the next command
472 */
473 } else {
474 pxamci_stop_clock(host);
475 if (host->clkrt != CLKRT_OFF) {
476 host->clkrt = CLKRT_OFF;
477 clk_disable_unprepare(host->clk);
478 }
479 }
480
481 if (host->power_mode != ios->power_mode) {
482 int ret;
483
484 host->power_mode = ios->power_mode;
485
486 ret = pxamci_set_power(host, ios->power_mode, ios->vdd);
487 if (ret) {
488 dev_err(mmc_dev(mmc), "unable to set power\n");
489 /*
490 * The .set_ios() function in the mmc_host_ops
491 * struct return void, and failing to set the
492 * power should be rare so we print an error and
493 * return here.
494 */
495 return;
496 }
497
498 if (ios->power_mode == MMC_POWER_ON)
499 host->cmdat |= CMDAT_INIT;
500 }
501
502 if (ios->bus_width == MMC_BUS_WIDTH_4)
503 host->cmdat |= CMDAT_SD_4DAT;
504 else
505 host->cmdat &= ~CMDAT_SD_4DAT;
506
507 dev_dbg(mmc_dev(mmc), "PXAMCI: clkrt = %x cmdat = %x\n",
508 host->clkrt, host->cmdat);
509 }
510
pxamci_enable_sdio_irq(struct mmc_host * host,int enable)511 static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
512 {
513 struct pxamci_host *pxa_host = mmc_priv(host);
514
515 if (enable)
516 pxamci_enable_irq(pxa_host, SDIO_INT);
517 else
518 pxamci_disable_irq(pxa_host, SDIO_INT);
519 }
520
521 static const struct mmc_host_ops pxamci_ops = {
522 .request = pxamci_request,
523 .get_cd = mmc_gpio_get_cd,
524 .get_ro = pxamci_get_ro,
525 .set_ios = pxamci_set_ios,
526 .enable_sdio_irq = pxamci_enable_sdio_irq,
527 };
528
pxamci_dma_irq(void * param)529 static void pxamci_dma_irq(void *param)
530 {
531 struct pxamci_host *host = param;
532 struct dma_tx_state state;
533 enum dma_status status;
534 struct dma_chan *chan;
535 unsigned long flags;
536
537 spin_lock_irqsave(&host->lock, flags);
538
539 if (!host->data)
540 goto out_unlock;
541
542 if (host->data->flags & MMC_DATA_READ)
543 chan = host->dma_chan_rx;
544 else
545 chan = host->dma_chan_tx;
546
547 status = dmaengine_tx_status(chan, host->dma_cookie, &state);
548
549 if (likely(status == DMA_COMPLETE)) {
550 writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
551 } else {
552 pr_err("%s: DMA error on %s channel\n", mmc_hostname(host->mmc),
553 host->data->flags & MMC_DATA_READ ? "rx" : "tx");
554 host->data->error = -EIO;
555 pxamci_data_done(host, 0);
556 }
557
558 out_unlock:
559 spin_unlock_irqrestore(&host->lock, flags);
560 }
561
pxamci_detect_irq(int irq,void * devid)562 static irqreturn_t pxamci_detect_irq(int irq, void *devid)
563 {
564 struct pxamci_host *host = mmc_priv(devid);
565
566 mmc_detect_change(devid, msecs_to_jiffies(host->detect_delay_ms));
567 return IRQ_HANDLED;
568 }
569
570 #ifdef CONFIG_OF
571 static const struct of_device_id pxa_mmc_dt_ids[] = {
572 { .compatible = "marvell,pxa-mmc" },
573 { }
574 };
575
576 MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
577
pxamci_of_init(struct platform_device * pdev,struct mmc_host * mmc)578 static int pxamci_of_init(struct platform_device *pdev,
579 struct mmc_host *mmc)
580 {
581 struct device_node *np = pdev->dev.of_node;
582 struct pxamci_host *host = mmc_priv(mmc);
583 u32 tmp;
584 int ret;
585
586 if (!np)
587 return 0;
588
589 /* pxa-mmc specific */
590 if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
591 host->detect_delay_ms = tmp;
592
593 ret = mmc_of_parse(mmc);
594 if (ret < 0)
595 return ret;
596
597 return 0;
598 }
599 #else
pxamci_of_init(struct platform_device * pdev,struct mmc_host * mmc)600 static int pxamci_of_init(struct platform_device *pdev,
601 struct mmc_host *mmc)
602 {
603 return 0;
604 }
605 #endif
606
pxamci_probe(struct platform_device * pdev)607 static int pxamci_probe(struct platform_device *pdev)
608 {
609 struct mmc_host *mmc;
610 struct pxamci_host *host = NULL;
611 struct device *dev = &pdev->dev;
612 struct resource *r;
613 int ret, irq;
614
615 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
616 irq = platform_get_irq(pdev, 0);
617 if (irq < 0)
618 return irq;
619
620 mmc = mmc_alloc_host(sizeof(struct pxamci_host), dev);
621 if (!mmc) {
622 ret = -ENOMEM;
623 goto out;
624 }
625
626 mmc->ops = &pxamci_ops;
627
628 /*
629 * We can do SG-DMA, but we don't because we never know how much
630 * data we successfully wrote to the card.
631 */
632 mmc->max_segs = NR_SG;
633
634 /*
635 * Our hardware DMA can handle a maximum of one page per SG entry.
636 */
637 mmc->max_seg_size = PAGE_SIZE;
638
639 /*
640 * Block length register is only 10 bits before PXA27x.
641 */
642 mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
643
644 /*
645 * Block count register is 16 bits.
646 */
647 mmc->max_blk_count = 65535;
648
649 ret = pxamci_of_init(pdev, mmc);
650 if (ret)
651 goto out;
652
653 host = mmc_priv(mmc);
654 host->mmc = mmc;
655 host->pdata = pdev->dev.platform_data;
656 host->clkrt = CLKRT_OFF;
657
658 host->clk = devm_clk_get(dev, NULL);
659 if (IS_ERR(host->clk)) {
660 ret = PTR_ERR(host->clk);
661 host->clk = NULL;
662 goto out;
663 }
664
665 host->clkrate = clk_get_rate(host->clk);
666
667 /*
668 * Calculate minimum clock rate, rounding up.
669 */
670 mmc->f_min = (host->clkrate + 63) / 64;
671 mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
672
673 ret = pxamci_init_ocr(host);
674 if (ret < 0)
675 goto out;
676
677 mmc->caps = 0;
678 host->cmdat = 0;
679 if (!cpu_is_pxa25x()) {
680 mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
681 host->cmdat |= CMDAT_SDIO_INT_EN;
682 if (mmc_has_26MHz())
683 mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
684 MMC_CAP_SD_HIGHSPEED;
685 }
686
687 spin_lock_init(&host->lock);
688 host->res = r;
689 host->imask = MMC_I_MASK_ALL;
690
691 host->base = devm_ioremap_resource(dev, r);
692 if (IS_ERR(host->base)) {
693 ret = PTR_ERR(host->base);
694 goto out;
695 }
696
697 /*
698 * Ensure that the host controller is shut down, and setup
699 * with our defaults.
700 */
701 pxamci_stop_clock(host);
702 writel(0, host->base + MMC_SPI);
703 writel(64, host->base + MMC_RESTO);
704 writel(host->imask, host->base + MMC_I_MASK);
705
706 ret = devm_request_irq(dev, irq, pxamci_irq, 0,
707 DRIVER_NAME, host);
708 if (ret)
709 goto out;
710
711 platform_set_drvdata(pdev, mmc);
712
713 host->dma_chan_rx = dma_request_chan(dev, "rx");
714 if (IS_ERR(host->dma_chan_rx)) {
715 dev_err(dev, "unable to request rx dma channel\n");
716 ret = PTR_ERR(host->dma_chan_rx);
717 host->dma_chan_rx = NULL;
718 goto out;
719 }
720
721 host->dma_chan_tx = dma_request_chan(dev, "tx");
722 if (IS_ERR(host->dma_chan_tx)) {
723 dev_err(dev, "unable to request tx dma channel\n");
724 ret = PTR_ERR(host->dma_chan_tx);
725 host->dma_chan_tx = NULL;
726 goto out;
727 }
728
729 if (host->pdata) {
730 host->detect_delay_ms = host->pdata->detect_delay_ms;
731
732 host->power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
733 if (IS_ERR(host->power)) {
734 ret = PTR_ERR(host->power);
735 dev_err(dev, "Failed requesting gpio_power\n");
736 goto out;
737 }
738
739 /* FIXME: should we pass detection delay to debounce? */
740 ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
741 if (ret && ret != -ENOENT) {
742 dev_err(dev, "Failed requesting gpio_cd\n");
743 goto out;
744 }
745
746 if (!host->pdata->gpio_card_ro_invert)
747 mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
748
749 ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0);
750 if (ret && ret != -ENOENT) {
751 dev_err(dev, "Failed requesting gpio_ro\n");
752 goto out;
753 }
754 if (!ret)
755 host->use_ro_gpio = true;
756
757 if (host->pdata->init)
758 host->pdata->init(dev, pxamci_detect_irq, mmc);
759
760 if (host->power && host->pdata->setpower)
761 dev_warn(dev, "gpio_power and setpower() both defined\n");
762 if (host->use_ro_gpio && host->pdata->get_ro)
763 dev_warn(dev, "gpio_ro and get_ro() both defined\n");
764 }
765
766 ret = mmc_add_host(mmc);
767 if (ret) {
768 if (host->pdata && host->pdata->exit)
769 host->pdata->exit(dev, mmc);
770 goto out;
771 }
772
773 return 0;
774
775 out:
776 if (host) {
777 if (host->dma_chan_rx)
778 dma_release_channel(host->dma_chan_rx);
779 if (host->dma_chan_tx)
780 dma_release_channel(host->dma_chan_tx);
781 }
782 if (mmc)
783 mmc_free_host(mmc);
784 return ret;
785 }
786
pxamci_remove(struct platform_device * pdev)787 static int pxamci_remove(struct platform_device *pdev)
788 {
789 struct mmc_host *mmc = platform_get_drvdata(pdev);
790
791 if (mmc) {
792 struct pxamci_host *host = mmc_priv(mmc);
793
794 mmc_remove_host(mmc);
795
796 if (host->pdata && host->pdata->exit)
797 host->pdata->exit(&pdev->dev, mmc);
798
799 pxamci_stop_clock(host);
800 writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
801 END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
802 host->base + MMC_I_MASK);
803
804 dmaengine_terminate_all(host->dma_chan_rx);
805 dmaengine_terminate_all(host->dma_chan_tx);
806 dma_release_channel(host->dma_chan_rx);
807 dma_release_channel(host->dma_chan_tx);
808
809 mmc_free_host(mmc);
810 }
811
812 return 0;
813 }
814
815 static struct platform_driver pxamci_driver = {
816 .probe = pxamci_probe,
817 .remove = pxamci_remove,
818 .driver = {
819 .name = DRIVER_NAME,
820 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
821 .of_match_table = of_match_ptr(pxa_mmc_dt_ids),
822 },
823 };
824
825 module_platform_driver(pxamci_driver);
826
827 MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
828 MODULE_LICENSE("GPL");
829 MODULE_ALIAS("platform:pxa2xx-mci");
830