1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Freescale GPMI NAND Flash Driver 4 * 5 * Copyright 2008-2011 Freescale Semiconductor, Inc. 6 * Copyright 2008 Embedded Alley Solutions, Inc. 7 */ 8 #ifndef __GPMI_NAND_GPMI_REGS_H 9 #define __GPMI_NAND_GPMI_REGS_H 10 11 #define HW_GPMI_CTRL0 0x00000000 12 #define HW_GPMI_CTRL0_SET 0x00000004 13 #define HW_GPMI_CTRL0_CLR 0x00000008 14 #define HW_GPMI_CTRL0_TOG 0x0000000c 15 16 #define BP_GPMI_CTRL0_COMMAND_MODE 24 17 #define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE) 18 #define BF_GPMI_CTRL0_COMMAND_MODE(v) \ 19 (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE) 20 #define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0 21 #define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1 22 #define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2 23 #define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3 24 25 #define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23) 26 #define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0 27 #define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1 28 29 /* 30 * Difference in LOCK_CS between imx23 and imx28 : 31 * This bit may impact the _POWER_ consumption. So some chips 32 * do not set it. 33 */ 34 #define MX23_BP_GPMI_CTRL0_LOCK_CS 22 35 #define MX28_BP_GPMI_CTRL0_LOCK_CS 27 36 #define LOCK_CS_ENABLE 0x1 37 #define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0 38 39 /* Difference in CS between imx23 and imx28 */ 40 #define BP_GPMI_CTRL0_CS 20 41 #define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS) 42 #define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS) 43 #define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \ 44 (GPMI_IS_MX23((x)) \ 45 ? MX23_BM_GPMI_CTRL0_CS \ 46 : MX28_BM_GPMI_CTRL0_CS)) 47 48 #define BP_GPMI_CTRL0_ADDRESS 17 49 #define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS) 50 #define BF_GPMI_CTRL0_ADDRESS(v) \ 51 (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS) 52 #define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0 53 #define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1 54 #define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2 55 56 #define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16) 57 #define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0 58 #define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1 59 60 #define BP_GPMI_CTRL0_XFER_COUNT 0 61 #define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT) 62 #define BF_GPMI_CTRL0_XFER_COUNT(v) \ 63 (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT) 64 65 #define HW_GPMI_COMPARE 0x00000010 66 67 #define HW_GPMI_ECCCTRL 0x00000020 68 #define HW_GPMI_ECCCTRL_SET 0x00000024 69 #define HW_GPMI_ECCCTRL_CLR 0x00000028 70 #define HW_GPMI_ECCCTRL_TOG 0x0000002c 71 72 #define BP_GPMI_ECCCTRL_ECC_CMD 13 73 #define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD) 74 #define BF_GPMI_ECCCTRL_ECC_CMD(v) \ 75 (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD) 76 #define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0 77 #define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1 78 79 #define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12) 80 #define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1 81 #define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0 82 83 #define BP_GPMI_ECCCTRL_BUFFER_MASK 0 84 #define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK) 85 #define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \ 86 (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK) 87 #define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100 88 #define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF 89 90 #define HW_GPMI_ECCCOUNT 0x00000030 91 #define HW_GPMI_PAYLOAD 0x00000040 92 #define HW_GPMI_AUXILIARY 0x00000050 93 #define HW_GPMI_CTRL1 0x00000060 94 #define HW_GPMI_CTRL1_SET 0x00000064 95 #define HW_GPMI_CTRL1_CLR 0x00000068 96 #define HW_GPMI_CTRL1_TOG 0x0000006c 97 98 #define BP_GPMI_CTRL1_DECOUPLE_CS 24 99 #define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS) 100 101 #define BP_GPMI_CTRL1_WRN_DLY_SEL 22 102 #define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) 103 #define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ 104 (((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL) 105 #define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0 106 #define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1 107 #define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2 108 #define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3 109 110 #define BM_GPMI_CTRL1_GANGED_RDYBUSY (1 << 19) 111 #define BM_GPMI_CTRL1_BCH_MODE (1 << 18) 112 113 #define BP_GPMI_CTRL1_DLL_ENABLE 17 114 #define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE) 115 116 #define BP_GPMI_CTRL1_HALF_PERIOD 16 117 #define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD) 118 119 #define BP_GPMI_CTRL1_RDN_DELAY 12 120 #define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY) 121 #define BF_GPMI_CTRL1_RDN_DELAY(v) \ 122 (((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY) 123 124 #define BM_GPMI_CTRL1_DEV_RESET (1 << 3) 125 #define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0 126 #define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1 127 128 #define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2) 129 #define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0 130 #define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1 131 132 #define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1) 133 #define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0 134 #define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1 135 136 #define BM_GPMI_CTRL1_GPMI_MODE (1 << 0) 137 138 #define BM_GPMI_CTRL1_CLEAR_MASK (BM_GPMI_CTRL1_WRN_DLY_SEL | \ 139 BM_GPMI_CTRL1_DLL_ENABLE | \ 140 BM_GPMI_CTRL1_RDN_DELAY | \ 141 BM_GPMI_CTRL1_HALF_PERIOD) 142 143 #define HW_GPMI_TIMING0 0x00000070 144 145 #define BP_GPMI_TIMING0_ADDRESS_SETUP 16 146 #define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP) 147 #define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \ 148 (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP) 149 150 #define BP_GPMI_TIMING0_DATA_HOLD 8 151 #define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD) 152 #define BF_GPMI_TIMING0_DATA_HOLD(v) \ 153 (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD) 154 155 #define BP_GPMI_TIMING0_DATA_SETUP 0 156 #define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP) 157 #define BF_GPMI_TIMING0_DATA_SETUP(v) \ 158 (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP) 159 160 #define HW_GPMI_TIMING1 0x00000080 161 #define BP_GPMI_TIMING1_BUSY_TIMEOUT 16 162 #define BM_GPMI_TIMING1_BUSY_TIMEOUT (0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT) 163 #define BF_GPMI_TIMING1_BUSY_TIMEOUT(v) \ 164 (((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT) 165 166 #define HW_GPMI_TIMING2 0x00000090 167 #define HW_GPMI_DATA 0x000000a0 168 169 /* MX28 uses this to detect READY. */ 170 #define HW_GPMI_STAT 0x000000b0 171 #define MX28_BP_GPMI_STAT_READY_BUSY 24 172 #define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY) 173 #define MX28_BF_GPMI_STAT_READY_BUSY(v) \ 174 (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY) 175 176 /* MX23 uses this to detect READY. */ 177 #define HW_GPMI_DEBUG 0x000000c0 178 #define MX23_BP_GPMI_DEBUG_READY0 28 179 #define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0) 180 #endif 181