1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef HOSTAP_CONFIG_H 3 #define HOSTAP_CONFIG_H 4 5 /* In the previous versions of Host AP driver, support for user space version 6 * of IEEE 802.11 management (hostapd) used to be disabled in the default 7 * configuration. From now on, support for hostapd is always included and it is 8 * possible to disable kernel driver version of IEEE 802.11 management with a 9 * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */ 10 /* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */ 11 12 /* Maximum number of events handler per one interrupt */ 13 #define PRISM2_MAX_INTERRUPT_EVENTS 20 14 15 /* Include code for downloading firmware images into volatile RAM. */ 16 #define PRISM2_DOWNLOAD_SUPPORT 17 18 /* Allow kernel configuration to enable download support. */ 19 #if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE) 20 #define PRISM2_DOWNLOAD_SUPPORT 21 #endif 22 23 /* Allow kernel configuration to enable non-volatile download support. */ 24 #ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM 25 #define PRISM2_NON_VOLATILE_DOWNLOAD 26 #endif 27 28 /* Save low-level I/O for debugging. This should not be enabled in normal use. 29 */ 30 /* #define PRISM2_IO_DEBUG */ 31 32 /* Following defines can be used to remove unneeded parts of the driver, e.g., 33 * to limit the size of the kernel module. Definitions can be added here in 34 * hostap_config.h or they can be added to make command with ccflags-y, 35 * e.g., 36 * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"' 37 */ 38 39 /* Do not include debug messages into the driver */ 40 /* #define PRISM2_NO_DEBUG */ 41 42 /* Do not include /proc/net/prism2/wlan#/{registers,debug} */ 43 /* #define PRISM2_NO_PROCFS_DEBUG */ 44 45 /* Do not include station functionality (i.e., allow only Master (Host AP) mode 46 */ 47 /* #define PRISM2_NO_STATION_MODES */ 48 49 #endif /* HOSTAP_CONFIG_H */ 50