1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
4 *
5 * core.c - Top level support
6 *
7 * Copyright 2017 IBM Corporation
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/platform_device.h>
13 #include <linux/delay.h>
14 #include <linux/ioport.h>
15 #include <linux/slab.h>
16 #include <linux/errno.h>
17 #include <linux/list.h>
18 #include <linux/interrupt.h>
19 #include <linux/proc_fs.h>
20 #include <linux/prefetch.h>
21 #include <linux/clk.h>
22 #include <linux/usb/gadget.h>
23 #include <linux/of.h>
24 #include <linux/of_gpio.h>
25 #include <linux/regmap.h>
26 #include <linux/dma-mapping.h>
27
28 #include "vhub.h"
29
ast_vhub_done(struct ast_vhub_ep * ep,struct ast_vhub_req * req,int status)30 void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
31 int status)
32 {
33 bool internal = req->internal;
34 struct ast_vhub *vhub = ep->vhub;
35
36 EPVDBG(ep, "completing request @%p, status %d\n", req, status);
37
38 list_del_init(&req->queue);
39
40 if (req->req.status == -EINPROGRESS)
41 req->req.status = status;
42
43 if (req->req.dma) {
44 if (!WARN_ON(!ep->dev))
45 usb_gadget_unmap_request_by_dev(&vhub->pdev->dev,
46 &req->req, ep->epn.is_in);
47 req->req.dma = 0;
48 }
49
50 /*
51 * If this isn't an internal EP0 request, call the core
52 * to call the gadget completion.
53 */
54 if (!internal) {
55 spin_unlock(&ep->vhub->lock);
56 usb_gadget_giveback_request(&ep->ep, &req->req);
57 spin_lock(&ep->vhub->lock);
58 }
59 }
60
ast_vhub_nuke(struct ast_vhub_ep * ep,int status)61 void ast_vhub_nuke(struct ast_vhub_ep *ep, int status)
62 {
63 struct ast_vhub_req *req;
64 int count = 0;
65
66 /* Beware, lock will be dropped & req-acquired by done() */
67 while (!list_empty(&ep->queue)) {
68 req = list_first_entry(&ep->queue, struct ast_vhub_req, queue);
69 ast_vhub_done(ep, req, status);
70 count++;
71 }
72 if (count)
73 EPDBG(ep, "Nuked %d request(s)\n", count);
74 }
75
ast_vhub_alloc_request(struct usb_ep * u_ep,gfp_t gfp_flags)76 struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
77 gfp_t gfp_flags)
78 {
79 struct ast_vhub_req *req;
80
81 req = kzalloc(sizeof(*req), gfp_flags);
82 if (!req)
83 return NULL;
84 return &req->req;
85 }
86
ast_vhub_free_request(struct usb_ep * u_ep,struct usb_request * u_req)87 void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req)
88 {
89 struct ast_vhub_req *req = to_ast_req(u_req);
90
91 kfree(req);
92 }
93
ast_vhub_irq(int irq,void * data)94 static irqreturn_t ast_vhub_irq(int irq, void *data)
95 {
96 struct ast_vhub *vhub = data;
97 irqreturn_t iret = IRQ_NONE;
98 u32 i, istat;
99
100 /* Stale interrupt while tearing down */
101 if (!vhub->ep0_bufs)
102 return IRQ_NONE;
103
104 spin_lock(&vhub->lock);
105
106 /* Read and ACK interrupts */
107 istat = readl(vhub->regs + AST_VHUB_ISR);
108 if (!istat)
109 goto bail;
110 writel(istat, vhub->regs + AST_VHUB_ISR);
111 iret = IRQ_HANDLED;
112
113 UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n",
114 istat,
115 readl(vhub->regs + AST_VHUB_EP_ACK_ISR),
116 readl(vhub->regs + AST_VHUB_EP_NACK_ISR));
117
118 /* Handle generic EPs first */
119 if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) {
120 u32 ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR);
121 writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR);
122
123 for (i = 0; ep_acks && i < vhub->max_epns; i++) {
124 u32 mask = VHUB_EP_IRQ(i);
125 if (ep_acks & mask) {
126 ast_vhub_epn_ack_irq(&vhub->epns[i]);
127 ep_acks &= ~mask;
128 }
129 }
130 }
131
132 /* Handle device interrupts */
133 if (istat & vhub->port_irq_mask) {
134 for (i = 0; i < vhub->max_ports; i++) {
135 if (istat & VHUB_DEV_IRQ(i))
136 ast_vhub_dev_irq(&vhub->ports[i].dev);
137 }
138 }
139
140 /* Handle top-level vHub EP0 interrupts */
141 if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
142 VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
143 VHUB_IRQ_HUB_EP0_SETUP)) {
144 if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL)
145 ast_vhub_ep0_handle_ack(&vhub->ep0, true);
146 if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL)
147 ast_vhub_ep0_handle_ack(&vhub->ep0, false);
148 if (istat & VHUB_IRQ_HUB_EP0_SETUP)
149 ast_vhub_ep0_handle_setup(&vhub->ep0);
150 }
151
152 /* Various top level bus events */
153 if (istat & (VHUB_IRQ_BUS_RESUME |
154 VHUB_IRQ_BUS_SUSPEND |
155 VHUB_IRQ_BUS_RESET)) {
156 if (istat & VHUB_IRQ_BUS_RESUME)
157 ast_vhub_hub_resume(vhub);
158 if (istat & VHUB_IRQ_BUS_SUSPEND)
159 ast_vhub_hub_suspend(vhub);
160 if (istat & VHUB_IRQ_BUS_RESET)
161 ast_vhub_hub_reset(vhub);
162 }
163
164 bail:
165 spin_unlock(&vhub->lock);
166 return iret;
167 }
168
ast_vhub_init_hw(struct ast_vhub * vhub)169 void ast_vhub_init_hw(struct ast_vhub *vhub)
170 {
171 u32 ctrl, port_mask, epn_mask;
172
173 UDCDBG(vhub,"(Re)Starting HW ...\n");
174
175 /* Enable PHY */
176 ctrl = VHUB_CTRL_PHY_CLK |
177 VHUB_CTRL_PHY_RESET_DIS;
178
179 /*
180 * We do *NOT* set the VHUB_CTRL_CLK_STOP_SUSPEND bit
181 * to stop the logic clock during suspend because
182 * it causes the registers to become inaccessible and
183 * we haven't yet figured out a good wayt to bring the
184 * controller back into life to issue a wakeup.
185 */
186
187 /*
188 * Set some ISO & split control bits according to Aspeed
189 * recommendation
190 *
191 * VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond
192 * with 0 bytes data packet to ISO IN endpoints when no data
193 * is available.
194 *
195 * VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN
196 * transaction.
197 */
198 ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN;
199 writel(ctrl, vhub->regs + AST_VHUB_CTRL);
200 udelay(1);
201
202 /* Set descriptor ring size */
203 if (AST_VHUB_DESCS_COUNT == 256) {
204 ctrl |= VHUB_CTRL_LONG_DESC;
205 writel(ctrl, vhub->regs + AST_VHUB_CTRL);
206 } else {
207 BUILD_BUG_ON(AST_VHUB_DESCS_COUNT != 32);
208 }
209
210 /* Reset all devices */
211 port_mask = GENMASK(vhub->max_ports, 1);
212 writel(VHUB_SW_RESET_ROOT_HUB |
213 VHUB_SW_RESET_DMA_CONTROLLER |
214 VHUB_SW_RESET_EP_POOL |
215 port_mask, vhub->regs + AST_VHUB_SW_RESET);
216 udelay(1);
217 writel(0, vhub->regs + AST_VHUB_SW_RESET);
218
219 /* Disable and cleanup EP ACK/NACK interrupts */
220 epn_mask = GENMASK(vhub->max_epns - 1, 0);
221 writel(0, vhub->regs + AST_VHUB_EP_ACK_IER);
222 writel(0, vhub->regs + AST_VHUB_EP_NACK_IER);
223 writel(epn_mask, vhub->regs + AST_VHUB_EP_ACK_ISR);
224 writel(epn_mask, vhub->regs + AST_VHUB_EP_NACK_ISR);
225
226 /* Default settings for EP0, enable HW hub EP1 */
227 writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
228 writel(VHUB_EP1_CTRL_RESET_TOGGLE |
229 VHUB_EP1_CTRL_ENABLE,
230 vhub->regs + AST_VHUB_EP1_CTRL);
231 writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
232
233 /* Configure EP0 DMA buffer */
234 writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA);
235
236 /* Clear address */
237 writel(0, vhub->regs + AST_VHUB_CONF);
238
239 /* Pullup hub (activate on host) */
240 if (vhub->force_usb1)
241 ctrl |= VHUB_CTRL_FULL_SPEED_ONLY;
242
243 ctrl |= VHUB_CTRL_UPSTREAM_CONNECT;
244 writel(ctrl, vhub->regs + AST_VHUB_CTRL);
245
246 /* Enable some interrupts */
247 writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
248 VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
249 VHUB_IRQ_HUB_EP0_SETUP |
250 VHUB_IRQ_EP_POOL_ACK_STALL |
251 VHUB_IRQ_BUS_RESUME |
252 VHUB_IRQ_BUS_SUSPEND |
253 VHUB_IRQ_BUS_RESET,
254 vhub->regs + AST_VHUB_IER);
255 }
256
ast_vhub_remove(struct platform_device * pdev)257 static int ast_vhub_remove(struct platform_device *pdev)
258 {
259 struct ast_vhub *vhub = platform_get_drvdata(pdev);
260 unsigned long flags;
261 int i;
262
263 if (!vhub || !vhub->regs)
264 return 0;
265
266 /* Remove devices */
267 for (i = 0; i < vhub->max_ports; i++)
268 ast_vhub_del_dev(&vhub->ports[i].dev);
269
270 spin_lock_irqsave(&vhub->lock, flags);
271
272 /* Mask & ack all interrupts */
273 writel(0, vhub->regs + AST_VHUB_IER);
274 writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
275
276 /* Pull device, leave PHY enabled */
277 writel(VHUB_CTRL_PHY_CLK |
278 VHUB_CTRL_PHY_RESET_DIS,
279 vhub->regs + AST_VHUB_CTRL);
280
281 if (vhub->clk)
282 clk_disable_unprepare(vhub->clk);
283
284 spin_unlock_irqrestore(&vhub->lock, flags);
285
286 if (vhub->ep0_bufs)
287 dma_free_coherent(&pdev->dev,
288 AST_VHUB_EP0_MAX_PACKET *
289 (vhub->max_ports + 1),
290 vhub->ep0_bufs,
291 vhub->ep0_bufs_dma);
292 vhub->ep0_bufs = NULL;
293
294 return 0;
295 }
296
ast_vhub_probe(struct platform_device * pdev)297 static int ast_vhub_probe(struct platform_device *pdev)
298 {
299 enum usb_device_speed max_speed;
300 struct ast_vhub *vhub;
301 struct resource *res;
302 int i, rc = 0;
303 const struct device_node *np = pdev->dev.of_node;
304
305 vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL);
306 if (!vhub)
307 return -ENOMEM;
308
309 rc = of_property_read_u32(np, "aspeed,vhub-downstream-ports",
310 &vhub->max_ports);
311 if (rc < 0)
312 vhub->max_ports = AST_VHUB_NUM_PORTS;
313
314 vhub->ports = devm_kcalloc(&pdev->dev, vhub->max_ports,
315 sizeof(*vhub->ports), GFP_KERNEL);
316 if (!vhub->ports)
317 return -ENOMEM;
318
319 rc = of_property_read_u32(np, "aspeed,vhub-generic-endpoints",
320 &vhub->max_epns);
321 if (rc < 0)
322 vhub->max_epns = AST_VHUB_NUM_GEN_EPs;
323
324 vhub->epns = devm_kcalloc(&pdev->dev, vhub->max_epns,
325 sizeof(*vhub->epns), GFP_KERNEL);
326 if (!vhub->epns)
327 return -ENOMEM;
328
329 spin_lock_init(&vhub->lock);
330 vhub->pdev = pdev;
331 vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1,
332 VHUB_IRQ_DEV1_BIT);
333
334 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
335 vhub->regs = devm_ioremap_resource(&pdev->dev, res);
336 if (IS_ERR(vhub->regs)) {
337 dev_err(&pdev->dev, "Failed to map resources\n");
338 return PTR_ERR(vhub->regs);
339 }
340 UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs);
341
342 platform_set_drvdata(pdev, vhub);
343
344 vhub->clk = devm_clk_get(&pdev->dev, NULL);
345 if (IS_ERR(vhub->clk)) {
346 rc = PTR_ERR(vhub->clk);
347 goto err;
348 }
349 rc = clk_prepare_enable(vhub->clk);
350 if (rc) {
351 dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc);
352 goto err;
353 }
354
355 /* Check if we need to limit the HW to USB1 */
356 max_speed = usb_get_maximum_speed(&pdev->dev);
357 if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH)
358 vhub->force_usb1 = true;
359
360 /* Mask & ack all interrupts before installing the handler */
361 writel(0, vhub->regs + AST_VHUB_IER);
362 writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
363
364 /* Find interrupt and install handler */
365 vhub->irq = platform_get_irq(pdev, 0);
366 if (vhub->irq < 0) {
367 rc = vhub->irq;
368 goto err;
369 }
370 rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0,
371 KBUILD_MODNAME, vhub);
372 if (rc) {
373 dev_err(&pdev->dev, "Failed to request interrupt\n");
374 goto err;
375 }
376
377 /*
378 * Allocate DMA buffers for all EP0s in one chunk,
379 * one per port and one for the vHub itself
380 */
381 vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev,
382 AST_VHUB_EP0_MAX_PACKET *
383 (vhub->max_ports + 1),
384 &vhub->ep0_bufs_dma, GFP_KERNEL);
385 if (!vhub->ep0_bufs) {
386 dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n");
387 rc = -ENOMEM;
388 goto err;
389 }
390 UDCVDBG(vhub, "EP0 DMA buffers @%p (DMA 0x%08x)\n",
391 vhub->ep0_bufs, (u32)vhub->ep0_bufs_dma);
392
393 /* Init vHub EP0 */
394 ast_vhub_init_ep0(vhub, &vhub->ep0, NULL);
395
396 /* Init devices */
397 for (i = 0; i < vhub->max_ports && rc == 0; i++)
398 rc = ast_vhub_init_dev(vhub, i);
399 if (rc)
400 goto err;
401
402 /* Init hub emulation */
403 rc = ast_vhub_init_hub(vhub);
404 if (rc)
405 goto err;
406
407 /* Initialize HW */
408 ast_vhub_init_hw(vhub);
409
410 dev_info(&pdev->dev, "Initialized virtual hub in USB%d mode\n",
411 vhub->force_usb1 ? 1 : 2);
412
413 return 0;
414 err:
415 ast_vhub_remove(pdev);
416 return rc;
417 }
418
419 static const struct of_device_id ast_vhub_dt_ids[] = {
420 {
421 .compatible = "aspeed,ast2400-usb-vhub",
422 },
423 {
424 .compatible = "aspeed,ast2500-usb-vhub",
425 },
426 {
427 .compatible = "aspeed,ast2600-usb-vhub",
428 },
429 { }
430 };
431 MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids);
432
433 static struct platform_driver ast_vhub_driver = {
434 .probe = ast_vhub_probe,
435 .remove = ast_vhub_remove,
436 .driver = {
437 .name = KBUILD_MODNAME,
438 .of_match_table = ast_vhub_dt_ids,
439 },
440 };
441 module_platform_driver(ast_vhub_driver);
442
443 MODULE_DESCRIPTION("Aspeed vHub udc driver");
444 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
445 MODULE_LICENSE("GPL");
446