1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * cx18 init/start/stop/exit stream functions
4 *
5 * Derived from ivtv-streams.c
6 *
7 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
8 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
9 */
10
11 #include "cx18-driver.h"
12 #include "cx18-io.h"
13 #include "cx18-fileops.h"
14 #include "cx18-mailbox.h"
15 #include "cx18-i2c.h"
16 #include "cx18-queue.h"
17 #include "cx18-ioctl.h"
18 #include "cx18-streams.h"
19 #include "cx18-cards.h"
20 #include "cx18-scb.h"
21 #include "cx18-dvb.h"
22
23 #define CX18_DSP0_INTERRUPT_MASK 0xd0004C
24
25 static const struct v4l2_file_operations cx18_v4l2_enc_fops = {
26 .owner = THIS_MODULE,
27 .read = cx18_v4l2_read,
28 .open = cx18_v4l2_open,
29 .unlocked_ioctl = video_ioctl2,
30 .release = cx18_v4l2_close,
31 .poll = cx18_v4l2_enc_poll,
32 .mmap = cx18_v4l2_mmap,
33 };
34
35 /* offset from 0 to register ts v4l2 minors on */
36 #define CX18_V4L2_ENC_TS_OFFSET 16
37 /* offset from 0 to register pcm v4l2 minors on */
38 #define CX18_V4L2_ENC_PCM_OFFSET 24
39 /* offset from 0 to register yuv v4l2 minors on */
40 #define CX18_V4L2_ENC_YUV_OFFSET 32
41
42 static struct {
43 const char *name;
44 int vfl_type;
45 int num_offset;
46 int dma;
47 u32 caps;
48 } cx18_stream_info[] = {
49 { /* CX18_ENC_STREAM_TYPE_MPG */
50 "encoder MPEG",
51 VFL_TYPE_VIDEO, 0,
52 DMA_FROM_DEVICE,
53 V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
54 V4L2_CAP_AUDIO | V4L2_CAP_TUNER
55 },
56 { /* CX18_ENC_STREAM_TYPE_TS */
57 "TS",
58 VFL_TYPE_VIDEO, -1,
59 DMA_FROM_DEVICE,
60 },
61 { /* CX18_ENC_STREAM_TYPE_YUV */
62 "encoder YUV",
63 VFL_TYPE_VIDEO, CX18_V4L2_ENC_YUV_OFFSET,
64 DMA_FROM_DEVICE,
65 V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
66 V4L2_CAP_STREAMING | V4L2_CAP_AUDIO | V4L2_CAP_TUNER
67 },
68 { /* CX18_ENC_STREAM_TYPE_VBI */
69 "encoder VBI",
70 VFL_TYPE_VBI, 0,
71 DMA_FROM_DEVICE,
72 V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE |
73 V4L2_CAP_READWRITE | V4L2_CAP_TUNER
74 },
75 { /* CX18_ENC_STREAM_TYPE_PCM */
76 "encoder PCM audio",
77 VFL_TYPE_VIDEO, CX18_V4L2_ENC_PCM_OFFSET,
78 DMA_FROM_DEVICE,
79 V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE,
80 },
81 { /* CX18_ENC_STREAM_TYPE_IDX */
82 "encoder IDX",
83 VFL_TYPE_VIDEO, -1,
84 DMA_FROM_DEVICE,
85 },
86 { /* CX18_ENC_STREAM_TYPE_RAD */
87 "encoder radio",
88 VFL_TYPE_RADIO, 0,
89 DMA_NONE,
90 V4L2_CAP_RADIO | V4L2_CAP_TUNER
91 },
92 };
93
94
cx18_dma_free(struct videobuf_queue * q,struct cx18_stream * s,struct cx18_videobuf_buffer * buf)95 static void cx18_dma_free(struct videobuf_queue *q,
96 struct cx18_stream *s, struct cx18_videobuf_buffer *buf)
97 {
98 videobuf_waiton(q, &buf->vb, 0, 0);
99 videobuf_vmalloc_free(&buf->vb);
100 buf->vb.state = VIDEOBUF_NEEDS_INIT;
101 }
102
cx18_prepare_buffer(struct videobuf_queue * q,struct cx18_stream * s,struct cx18_videobuf_buffer * buf,u32 pixelformat,unsigned int width,unsigned int height,enum v4l2_field field)103 static int cx18_prepare_buffer(struct videobuf_queue *q,
104 struct cx18_stream *s,
105 struct cx18_videobuf_buffer *buf,
106 u32 pixelformat,
107 unsigned int width, unsigned int height,
108 enum v4l2_field field)
109 {
110 struct cx18 *cx = s->cx;
111 int rc = 0;
112
113 /* check settings */
114 buf->bytes_used = 0;
115
116 if ((width < 48) || (height < 32))
117 return -EINVAL;
118
119 buf->vb.size = (width * height * 2);
120 if ((buf->vb.baddr != 0) && (buf->vb.bsize < buf->vb.size))
121 return -EINVAL;
122
123 /* alloc + fill struct (if changed) */
124 if (buf->vb.width != width || buf->vb.height != height ||
125 buf->vb.field != field || s->pixelformat != pixelformat ||
126 buf->tvnorm != cx->std) {
127
128 buf->vb.width = width;
129 buf->vb.height = height;
130 buf->vb.field = field;
131 buf->tvnorm = cx->std;
132 s->pixelformat = pixelformat;
133
134 /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
135 UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
136 if (s->pixelformat == V4L2_PIX_FMT_NV12_16L16)
137 s->vb_bytes_per_frame = height * 720 * 3 / 2;
138 else
139 s->vb_bytes_per_frame = height * 720 * 2;
140 cx18_dma_free(q, s, buf);
141 }
142
143 if ((buf->vb.baddr != 0) && (buf->vb.bsize < buf->vb.size))
144 return -EINVAL;
145
146 if (buf->vb.field == 0)
147 buf->vb.field = V4L2_FIELD_INTERLACED;
148
149 if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
150 buf->vb.width = width;
151 buf->vb.height = height;
152 buf->vb.field = field;
153 buf->tvnorm = cx->std;
154 s->pixelformat = pixelformat;
155
156 /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
157 UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
158 if (s->pixelformat == V4L2_PIX_FMT_NV12_16L16)
159 s->vb_bytes_per_frame = height * 720 * 3 / 2;
160 else
161 s->vb_bytes_per_frame = height * 720 * 2;
162 rc = videobuf_iolock(q, &buf->vb, NULL);
163 if (rc != 0)
164 goto fail;
165 }
166 buf->vb.state = VIDEOBUF_PREPARED;
167 return 0;
168
169 fail:
170 cx18_dma_free(q, s, buf);
171 return rc;
172
173 }
174
175 /* VB_MIN_BUFSIZE is lcm(1440 * 480, 1440 * 576)
176 1440 is a single line of 4:2:2 YUV at 720 luma samples wide
177 */
178 #define VB_MIN_BUFFERS 32
179 #define VB_MIN_BUFSIZE 4147200
180
buffer_setup(struct videobuf_queue * q,unsigned int * count,unsigned int * size)181 static int buffer_setup(struct videobuf_queue *q,
182 unsigned int *count, unsigned int *size)
183 {
184 struct cx18_stream *s = q->priv_data;
185 struct cx18 *cx = s->cx;
186
187 *size = 2 * cx->cxhdl.width * cx->cxhdl.height;
188 if (*count == 0)
189 *count = VB_MIN_BUFFERS;
190
191 while (*size * *count > VB_MIN_BUFFERS * VB_MIN_BUFSIZE)
192 (*count)--;
193
194 q->field = V4L2_FIELD_INTERLACED;
195 q->last = V4L2_FIELD_INTERLACED;
196
197 return 0;
198 }
199
buffer_prepare(struct videobuf_queue * q,struct videobuf_buffer * vb,enum v4l2_field field)200 static int buffer_prepare(struct videobuf_queue *q,
201 struct videobuf_buffer *vb,
202 enum v4l2_field field)
203 {
204 struct cx18_videobuf_buffer *buf =
205 container_of(vb, struct cx18_videobuf_buffer, vb);
206 struct cx18_stream *s = q->priv_data;
207 struct cx18 *cx = s->cx;
208
209 return cx18_prepare_buffer(q, s, buf, s->pixelformat,
210 cx->cxhdl.width, cx->cxhdl.height, field);
211 }
212
buffer_release(struct videobuf_queue * q,struct videobuf_buffer * vb)213 static void buffer_release(struct videobuf_queue *q,
214 struct videobuf_buffer *vb)
215 {
216 struct cx18_videobuf_buffer *buf =
217 container_of(vb, struct cx18_videobuf_buffer, vb);
218 struct cx18_stream *s = q->priv_data;
219
220 cx18_dma_free(q, s, buf);
221 }
222
buffer_queue(struct videobuf_queue * q,struct videobuf_buffer * vb)223 static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
224 {
225 struct cx18_videobuf_buffer *buf =
226 container_of(vb, struct cx18_videobuf_buffer, vb);
227 struct cx18_stream *s = q->priv_data;
228
229 buf->vb.state = VIDEOBUF_QUEUED;
230
231 list_add_tail(&buf->vb.queue, &s->vb_capture);
232 }
233
234 static const struct videobuf_queue_ops cx18_videobuf_qops = {
235 .buf_setup = buffer_setup,
236 .buf_prepare = buffer_prepare,
237 .buf_queue = buffer_queue,
238 .buf_release = buffer_release,
239 };
240
cx18_stream_init(struct cx18 * cx,int type)241 static void cx18_stream_init(struct cx18 *cx, int type)
242 {
243 struct cx18_stream *s = &cx->streams[type];
244
245 memset(s, 0, sizeof(*s));
246
247 /* initialize cx18_stream fields */
248 s->dvb = NULL;
249 s->cx = cx;
250 s->type = type;
251 s->name = cx18_stream_info[type].name;
252 s->handle = CX18_INVALID_TASK_HANDLE;
253
254 s->dma = cx18_stream_info[type].dma;
255 s->v4l2_dev_caps = cx18_stream_info[type].caps;
256 s->buffers = cx->stream_buffers[type];
257 s->buf_size = cx->stream_buf_size[type];
258 INIT_LIST_HEAD(&s->buf_pool);
259 s->bufs_per_mdl = 1;
260 s->mdl_size = s->buf_size * s->bufs_per_mdl;
261
262 init_waitqueue_head(&s->waitq);
263 s->id = -1;
264 spin_lock_init(&s->q_free.lock);
265 cx18_queue_init(&s->q_free);
266 spin_lock_init(&s->q_busy.lock);
267 cx18_queue_init(&s->q_busy);
268 spin_lock_init(&s->q_full.lock);
269 cx18_queue_init(&s->q_full);
270 spin_lock_init(&s->q_idle.lock);
271 cx18_queue_init(&s->q_idle);
272
273 INIT_WORK(&s->out_work_order, cx18_out_work_handler);
274
275 INIT_LIST_HEAD(&s->vb_capture);
276 timer_setup(&s->vb_timeout, cx18_vb_timeout, 0);
277 spin_lock_init(&s->vb_lock);
278 if (type == CX18_ENC_STREAM_TYPE_YUV) {
279 spin_lock_init(&s->vbuf_q_lock);
280
281 s->vb_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
282 videobuf_queue_vmalloc_init(&s->vbuf_q, &cx18_videobuf_qops,
283 &cx->pci_dev->dev, &s->vbuf_q_lock,
284 V4L2_BUF_TYPE_VIDEO_CAPTURE,
285 V4L2_FIELD_INTERLACED,
286 sizeof(struct cx18_videobuf_buffer),
287 s, &cx->serialize_lock);
288
289 /* Assume the previous pixel default */
290 s->pixelformat = V4L2_PIX_FMT_NV12_16L16;
291 s->vb_bytes_per_frame = cx->cxhdl.height * 720 * 3 / 2;
292 s->vb_bytes_per_line = 720;
293 }
294 }
295
cx18_prep_dev(struct cx18 * cx,int type)296 static int cx18_prep_dev(struct cx18 *cx, int type)
297 {
298 struct cx18_stream *s = &cx->streams[type];
299 u32 cap = cx->v4l2_cap;
300 int num_offset = cx18_stream_info[type].num_offset;
301 int num = cx->instance + cx18_first_minor + num_offset;
302
303 /*
304 * These five fields are always initialized.
305 * For analog capture related streams, if video_dev.v4l2_dev == NULL then the
306 * stream is not in use.
307 * For the TS stream, if dvb == NULL then the stream is not in use.
308 * In those cases no other fields but these four can be used.
309 */
310 s->video_dev.v4l2_dev = NULL;
311 s->dvb = NULL;
312 s->cx = cx;
313 s->type = type;
314 s->name = cx18_stream_info[type].name;
315
316 /* Check whether the radio is supported */
317 if (type == CX18_ENC_STREAM_TYPE_RAD && !(cap & V4L2_CAP_RADIO))
318 return 0;
319
320 /* Check whether VBI is supported */
321 if (type == CX18_ENC_STREAM_TYPE_VBI &&
322 !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE)))
323 return 0;
324
325 /* User explicitly selected 0 buffers for these streams, so don't
326 create them. */
327 if (cx18_stream_info[type].dma != DMA_NONE &&
328 cx->stream_buffers[type] == 0) {
329 CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name);
330 return 0;
331 }
332
333 cx18_stream_init(cx, type);
334
335 /* Allocate the cx18_dvb struct only for the TS on cards with DTV */
336 if (type == CX18_ENC_STREAM_TYPE_TS) {
337 if (cx->card->hw_all & CX18_HW_DVB) {
338 s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
339 if (s->dvb == NULL) {
340 CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n",
341 s->name);
342 return -ENOMEM;
343 }
344 } else {
345 /* Don't need buffers for the TS, if there is no DVB */
346 s->buffers = 0;
347 }
348 }
349
350 if (num_offset == -1)
351 return 0;
352
353 /* initialize the v4l2 video device structure */
354 snprintf(s->video_dev.name, sizeof(s->video_dev.name), "%s %s",
355 cx->v4l2_dev.name, s->name);
356
357 s->video_dev.num = num;
358 s->video_dev.v4l2_dev = &cx->v4l2_dev;
359 s->video_dev.fops = &cx18_v4l2_enc_fops;
360 s->video_dev.release = video_device_release_empty;
361 if (cx->card->video_inputs->video_type == CX18_CARD_INPUT_VID_TUNER)
362 s->video_dev.tvnorms = cx->tuner_std;
363 else
364 s->video_dev.tvnorms = V4L2_STD_ALL;
365 s->video_dev.lock = &cx->serialize_lock;
366 cx18_set_funcs(&s->video_dev);
367 return 0;
368 }
369
370 /* Initialize v4l2 variables and register v4l2 devices */
cx18_streams_setup(struct cx18 * cx)371 int cx18_streams_setup(struct cx18 *cx)
372 {
373 int type, ret;
374
375 /* Setup V4L2 Devices */
376 for (type = 0; type < CX18_MAX_STREAMS; type++) {
377 /* Prepare device */
378 ret = cx18_prep_dev(cx, type);
379 if (ret < 0)
380 break;
381
382 /* Allocate Stream */
383 ret = cx18_stream_alloc(&cx->streams[type]);
384 if (ret < 0)
385 break;
386 }
387 if (type == CX18_MAX_STREAMS)
388 return 0;
389
390 /* One or more streams could not be initialized. Clean 'em all up. */
391 cx18_streams_cleanup(cx, 0);
392 return ret;
393 }
394
cx18_reg_dev(struct cx18 * cx,int type)395 static int cx18_reg_dev(struct cx18 *cx, int type)
396 {
397 struct cx18_stream *s = &cx->streams[type];
398 int vfl_type = cx18_stream_info[type].vfl_type;
399 const char *name;
400 int num, ret;
401
402 if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) {
403 ret = cx18_dvb_register(s);
404 if (ret < 0) {
405 CX18_ERR("DVB failed to register\n");
406 return ret;
407 }
408 }
409
410 if (s->video_dev.v4l2_dev == NULL)
411 return 0;
412
413 num = s->video_dev.num;
414 s->video_dev.device_caps = s->v4l2_dev_caps; /* device capabilities */
415 /* card number + user defined offset + device offset */
416 if (type != CX18_ENC_STREAM_TYPE_MPG) {
417 struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG];
418
419 if (s_mpg->video_dev.v4l2_dev)
420 num = s_mpg->video_dev.num
421 + cx18_stream_info[type].num_offset;
422 }
423 video_set_drvdata(&s->video_dev, s);
424
425 /* Register device. First try the desired minor, then any free one. */
426 ret = video_register_device_no_warn(&s->video_dev, vfl_type, num);
427 if (ret < 0) {
428 CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
429 s->name, num);
430 s->video_dev.v4l2_dev = NULL;
431 return ret;
432 }
433
434 name = video_device_node_name(&s->video_dev);
435
436 switch (vfl_type) {
437 case VFL_TYPE_VIDEO:
438 CX18_INFO("Registered device %s for %s (%d x %d.%02d kB)\n",
439 name, s->name, cx->stream_buffers[type],
440 cx->stream_buf_size[type] / 1024,
441 (cx->stream_buf_size[type] * 100 / 1024) % 100);
442 break;
443
444 case VFL_TYPE_RADIO:
445 CX18_INFO("Registered device %s for %s\n", name, s->name);
446 break;
447
448 case VFL_TYPE_VBI:
449 if (cx->stream_buffers[type])
450 CX18_INFO("Registered device %s for %s (%d x %d bytes)\n",
451 name, s->name, cx->stream_buffers[type],
452 cx->stream_buf_size[type]);
453 else
454 CX18_INFO("Registered device %s for %s\n",
455 name, s->name);
456 break;
457 }
458
459 return 0;
460 }
461
462 /* Register v4l2 devices */
cx18_streams_register(struct cx18 * cx)463 int cx18_streams_register(struct cx18 *cx)
464 {
465 int type;
466 int err;
467 int ret = 0;
468
469 /* Register V4L2 devices */
470 for (type = 0; type < CX18_MAX_STREAMS; type++) {
471 err = cx18_reg_dev(cx, type);
472 if (err && ret == 0)
473 ret = err;
474 }
475
476 if (ret == 0)
477 return 0;
478
479 /* One or more streams could not be initialized. Clean 'em all up. */
480 cx18_streams_cleanup(cx, 1);
481 return ret;
482 }
483
484 /* Unregister v4l2 devices */
cx18_streams_cleanup(struct cx18 * cx,int unregister)485 void cx18_streams_cleanup(struct cx18 *cx, int unregister)
486 {
487 struct video_device *vdev;
488 int type;
489
490 /* Teardown all streams */
491 for (type = 0; type < CX18_MAX_STREAMS; type++) {
492
493 /* The TS has a cx18_dvb structure, not a video_device */
494 if (type == CX18_ENC_STREAM_TYPE_TS) {
495 if (cx->streams[type].dvb != NULL) {
496 if (unregister)
497 cx18_dvb_unregister(&cx->streams[type]);
498 kfree(cx->streams[type].dvb);
499 cx->streams[type].dvb = NULL;
500 cx18_stream_free(&cx->streams[type]);
501 }
502 continue;
503 }
504
505 /* No struct video_device, but can have buffers allocated */
506 if (type == CX18_ENC_STREAM_TYPE_IDX) {
507 /* If the module params didn't inhibit IDX ... */
508 if (cx->stream_buffers[type] != 0) {
509 cx->stream_buffers[type] = 0;
510 /*
511 * Before calling cx18_stream_free(),
512 * check if the IDX stream was actually set up.
513 * Needed, since the cx18_probe() error path
514 * exits through here as well as normal clean up
515 */
516 if (cx->streams[type].buffers != 0)
517 cx18_stream_free(&cx->streams[type]);
518 }
519 continue;
520 }
521
522 /* If struct video_device exists, can have buffers allocated */
523 vdev = &cx->streams[type].video_dev;
524
525 if (vdev->v4l2_dev == NULL)
526 continue;
527
528 if (type == CX18_ENC_STREAM_TYPE_YUV)
529 videobuf_mmap_free(&cx->streams[type].vbuf_q);
530
531 cx18_stream_free(&cx->streams[type]);
532
533 video_unregister_device(vdev);
534 }
535 }
536
cx18_vbi_setup(struct cx18_stream * s)537 static void cx18_vbi_setup(struct cx18_stream *s)
538 {
539 struct cx18 *cx = s->cx;
540 int raw = cx18_raw_vbi(cx);
541 u32 data[CX2341X_MBOX_MAX_DATA];
542 int lines;
543
544 if (cx->is_60hz) {
545 cx->vbi.count = 12;
546 cx->vbi.start[0] = 10;
547 cx->vbi.start[1] = 273;
548 } else { /* PAL/SECAM */
549 cx->vbi.count = 18;
550 cx->vbi.start[0] = 6;
551 cx->vbi.start[1] = 318;
552 }
553
554 /* setup VBI registers */
555 if (raw)
556 v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &cx->vbi.in.fmt.vbi);
557 else
558 v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &cx->vbi.in.fmt.sliced);
559
560 /*
561 * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw
562 * VBI when the first analog capture channel starts, as once it starts
563 * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup
564 * (i.e. for the VBI capture channels). We also send it for each
565 * analog capture channel anyway just to make sure we get the proper
566 * behavior
567 */
568 if (raw) {
569 lines = cx->vbi.count * 2;
570 } else {
571 /*
572 * For 525/60 systems, according to the VIP 2 & BT.656 std:
573 * The EAV RP code's Field bit toggles on line 4, a few lines
574 * after the Vertcal Blank bit has already toggled.
575 * Tell the encoder to capture 21-4+1=18 lines per field,
576 * since we want lines 10 through 21.
577 *
578 * For 625/50 systems, according to the VIP 2 & BT.656 std:
579 * The EAV RP code's Field bit toggles on line 1, a few lines
580 * after the Vertcal Blank bit has already toggled.
581 * (We've actually set the digitizer so that the Field bit
582 * toggles on line 2.) Tell the encoder to capture 23-2+1=22
583 * lines per field, since we want lines 6 through 23.
584 */
585 lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2;
586 }
587
588 data[0] = s->handle;
589 /* Lines per field */
590 data[1] = (lines / 2) | ((lines / 2) << 16);
591 /* bytes per line */
592 data[2] = (raw ? VBI_ACTIVE_SAMPLES
593 : (cx->is_60hz ? VBI_HBLANK_SAMPLES_60HZ
594 : VBI_HBLANK_SAMPLES_50HZ));
595 /* Every X number of frames a VBI interrupt arrives
596 (frames as in 25 or 30 fps) */
597 data[3] = 1;
598 /*
599 * Set the SAV/EAV RP codes to look for as start/stop points
600 * when in VIP-1.1 mode
601 */
602 if (raw) {
603 /*
604 * Start codes for beginning of "active" line in vertical blank
605 * 0x20 ( VerticalBlank )
606 * 0x60 ( EvenField VerticalBlank )
607 */
608 data[4] = 0x20602060;
609 /*
610 * End codes for end of "active" raw lines and regular lines
611 * 0x30 ( VerticalBlank HorizontalBlank)
612 * 0x70 ( EvenField VerticalBlank HorizontalBlank)
613 * 0x90 (Task HorizontalBlank)
614 * 0xd0 (Task EvenField HorizontalBlank)
615 */
616 data[5] = 0x307090d0;
617 } else {
618 /*
619 * End codes for active video, we want data in the hblank region
620 * 0xb0 (Task 0 VerticalBlank HorizontalBlank)
621 * 0xf0 (Task EvenField VerticalBlank HorizontalBlank)
622 *
623 * Since the V bit is only allowed to toggle in the EAV RP code,
624 * just before the first active region line, these two
625 * are problematic:
626 * 0x90 (Task HorizontalBlank)
627 * 0xd0 (Task EvenField HorizontalBlank)
628 *
629 * We have set the digitzer such that we don't have to worry
630 * about these problem codes.
631 */
632 data[4] = 0xB0F0B0F0;
633 /*
634 * Start codes for beginning of active line in vertical blank
635 * 0xa0 (Task VerticalBlank )
636 * 0xe0 (Task EvenField VerticalBlank )
637 */
638 data[5] = 0xA0E0A0E0;
639 }
640
641 CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n",
642 data[0], data[1], data[2], data[3], data[4], data[5]);
643
644 cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
645 }
646
cx18_stream_rotate_idx_mdls(struct cx18 * cx)647 void cx18_stream_rotate_idx_mdls(struct cx18 *cx)
648 {
649 struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
650 struct cx18_mdl *mdl;
651
652 if (!cx18_stream_enabled(s))
653 return;
654
655 /* Return if the firmware is not running low on MDLs */
656 if ((atomic_read(&s->q_free.depth) + atomic_read(&s->q_busy.depth)) >=
657 CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN)
658 return;
659
660 /* Return if there are no MDLs to rotate back to the firmware */
661 if (atomic_read(&s->q_full.depth) < 2)
662 return;
663
664 /*
665 * Take the oldest IDX MDL still holding data, and discard its index
666 * entries by scheduling the MDL to go back to the firmware
667 */
668 mdl = cx18_dequeue(s, &s->q_full);
669 if (mdl != NULL)
670 cx18_enqueue(s, mdl, &s->q_free);
671 }
672
673 static
_cx18_stream_put_mdl_fw(struct cx18_stream * s,struct cx18_mdl * mdl)674 struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s,
675 struct cx18_mdl *mdl)
676 {
677 struct cx18 *cx = s->cx;
678 struct cx18_queue *q;
679
680 /* Don't give it to the firmware, if we're not running a capture */
681 if (s->handle == CX18_INVALID_TASK_HANDLE ||
682 test_bit(CX18_F_S_STOPPING, &s->s_flags) ||
683 !test_bit(CX18_F_S_STREAMING, &s->s_flags))
684 return cx18_enqueue(s, mdl, &s->q_free);
685
686 q = cx18_enqueue(s, mdl, &s->q_busy);
687 if (q != &s->q_busy)
688 return q; /* The firmware has the max MDLs it can handle */
689
690 cx18_mdl_sync_for_device(s, mdl);
691 cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
692 (void __iomem *) &cx->scb->cpu_mdl[mdl->id] - cx->enc_mem,
693 s->bufs_per_mdl, mdl->id, s->mdl_size);
694 return q;
695 }
696
697 static
_cx18_stream_load_fw_queue(struct cx18_stream * s)698 void _cx18_stream_load_fw_queue(struct cx18_stream *s)
699 {
700 struct cx18_queue *q;
701 struct cx18_mdl *mdl;
702
703 if (atomic_read(&s->q_free.depth) == 0 ||
704 atomic_read(&s->q_busy.depth) >= CX18_MAX_FW_MDLS_PER_STREAM)
705 return;
706
707 /* Move from q_free to q_busy notifying the firmware, until the limit */
708 do {
709 mdl = cx18_dequeue(s, &s->q_free);
710 if (mdl == NULL)
711 break;
712 q = _cx18_stream_put_mdl_fw(s, mdl);
713 } while (atomic_read(&s->q_busy.depth) < CX18_MAX_FW_MDLS_PER_STREAM
714 && q == &s->q_busy);
715 }
716
cx18_out_work_handler(struct work_struct * work)717 void cx18_out_work_handler(struct work_struct *work)
718 {
719 struct cx18_stream *s =
720 container_of(work, struct cx18_stream, out_work_order);
721
722 _cx18_stream_load_fw_queue(s);
723 }
724
cx18_stream_configure_mdls(struct cx18_stream * s)725 static void cx18_stream_configure_mdls(struct cx18_stream *s)
726 {
727 cx18_unload_queues(s);
728
729 switch (s->type) {
730 case CX18_ENC_STREAM_TYPE_YUV:
731 /*
732 * Height should be a multiple of 32 lines.
733 * Set the MDL size to the exact size needed for one frame.
734 * Use enough buffers per MDL to cover the MDL size
735 */
736 if (s->pixelformat == V4L2_PIX_FMT_NV12_16L16)
737 s->mdl_size = 720 * s->cx->cxhdl.height * 3 / 2;
738 else
739 s->mdl_size = 720 * s->cx->cxhdl.height * 2;
740 s->bufs_per_mdl = s->mdl_size / s->buf_size;
741 if (s->mdl_size % s->buf_size)
742 s->bufs_per_mdl++;
743 break;
744 case CX18_ENC_STREAM_TYPE_VBI:
745 s->bufs_per_mdl = 1;
746 if (cx18_raw_vbi(s->cx)) {
747 s->mdl_size = (s->cx->is_60hz ? 12 : 18)
748 * 2 * VBI_ACTIVE_SAMPLES;
749 } else {
750 /*
751 * See comment in cx18_vbi_setup() below about the
752 * extra lines we capture in sliced VBI mode due to
753 * the lines on which EAV RP codes toggle.
754 */
755 s->mdl_size = s->cx->is_60hz
756 ? (21 - 4 + 1) * 2 * VBI_HBLANK_SAMPLES_60HZ
757 : (23 - 2 + 1) * 2 * VBI_HBLANK_SAMPLES_50HZ;
758 }
759 break;
760 default:
761 s->bufs_per_mdl = 1;
762 s->mdl_size = s->buf_size * s->bufs_per_mdl;
763 break;
764 }
765
766 cx18_load_queues(s);
767 }
768
cx18_start_v4l2_encode_stream(struct cx18_stream * s)769 int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
770 {
771 u32 data[MAX_MB_ARGUMENTS];
772 struct cx18 *cx = s->cx;
773 int captype = 0;
774 struct cx18_stream *s_idx;
775
776 if (!cx18_stream_enabled(s))
777 return -EINVAL;
778
779 CX18_DEBUG_INFO("Start encoder stream %s\n", s->name);
780
781 switch (s->type) {
782 case CX18_ENC_STREAM_TYPE_MPG:
783 captype = CAPTURE_CHANNEL_TYPE_MPEG;
784 cx->mpg_data_received = cx->vbi_data_inserted = 0;
785 cx->dualwatch_jiffies = jiffies;
786 cx->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode);
787 cx->search_pack_header = 0;
788 break;
789
790 case CX18_ENC_STREAM_TYPE_IDX:
791 captype = CAPTURE_CHANNEL_TYPE_INDEX;
792 break;
793 case CX18_ENC_STREAM_TYPE_TS:
794 captype = CAPTURE_CHANNEL_TYPE_TS;
795 break;
796 case CX18_ENC_STREAM_TYPE_YUV:
797 captype = CAPTURE_CHANNEL_TYPE_YUV;
798 break;
799 case CX18_ENC_STREAM_TYPE_PCM:
800 captype = CAPTURE_CHANNEL_TYPE_PCM;
801 break;
802 case CX18_ENC_STREAM_TYPE_VBI:
803 #ifdef CX18_ENCODER_PARSES_SLICED
804 captype = cx18_raw_vbi(cx) ?
805 CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI;
806 #else
807 /*
808 * Currently we set things up so that Sliced VBI from the
809 * digitizer is handled as Raw VBI by the encoder
810 */
811 captype = CAPTURE_CHANNEL_TYPE_VBI;
812 #endif
813 cx->vbi.frame = 0;
814 cx->vbi.inserted_frame = 0;
815 memset(cx->vbi.sliced_mpeg_size,
816 0, sizeof(cx->vbi.sliced_mpeg_size));
817 break;
818 default:
819 return -EINVAL;
820 }
821
822 /* Clear Streamoff flags in case left from last capture */
823 clear_bit(CX18_F_S_STREAMOFF, &s->s_flags);
824
825 cx18_vapi_result(cx, data, CX18_CREATE_TASK, 1, CPU_CMD_MASK_CAPTURE);
826 s->handle = data[0];
827 cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
828
829 /*
830 * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and
831 * set up all the parameters, as it is not obvious which parameters the
832 * firmware shares across capture channel types and which it does not.
833 *
834 * Some of the cx18_vapi() calls below apply to only certain capture
835 * channel types. We're hoping there's no harm in calling most of them
836 * anyway, as long as the values are all consistent. Setting some
837 * shared parameters will have no effect once an analog capture channel
838 * has started streaming.
839 */
840 if (captype != CAPTURE_CHANNEL_TYPE_TS) {
841 cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
842 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
843 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0);
844 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1);
845
846 /*
847 * Audio related reset according to
848 * Documentation/driver-api/media/drivers/cx2341x-devel.rst
849 */
850 if (atomic_read(&cx->ana_capturing) == 0)
851 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
852 s->handle, 12);
853
854 /*
855 * Number of lines for Field 1 & Field 2 according to
856 * Documentation/driver-api/media/drivers/cx2341x-devel.rst
857 * Field 1 is 312 for 625 line systems in BT.656
858 * Field 2 is 313 for 625 line systems in BT.656
859 */
860 cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3,
861 s->handle, 312, 313);
862
863 if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE)
864 cx18_vbi_setup(s);
865
866 /*
867 * Select to receive I, P, and B frame index entries, if the
868 * index stream is enabled. Otherwise disable index entry
869 * generation.
870 */
871 s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
872 cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 2,
873 s->handle, cx18_stream_enabled(s_idx) ? 7 : 0);
874
875 /* Call out to the common CX2341x API setup for user controls */
876 cx->cxhdl.priv = s;
877 cx2341x_handler_setup(&cx->cxhdl);
878
879 /*
880 * When starting a capture and we're set for radio,
881 * ensure the video is muted, despite the user control.
882 */
883 if (!cx->cxhdl.video_mute &&
884 test_bit(CX18_F_I_RADIO_USER, &cx->i_flags))
885 cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
886 (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8) | 1);
887
888 /* Enable the Video Format Converter for UYVY 4:2:2 support,
889 * rather than the default HM12 Macroblovk 4:2:0 support.
890 */
891 if (captype == CAPTURE_CHANNEL_TYPE_YUV) {
892 if (s->pixelformat == V4L2_PIX_FMT_UYVY)
893 cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2,
894 s->handle, 1);
895 else
896 /* If in doubt, default to HM12 */
897 cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2,
898 s->handle, 0);
899 }
900 }
901
902 if (atomic_read(&cx->tot_capturing) == 0) {
903 cx2341x_handler_set_busy(&cx->cxhdl, 1);
904 clear_bit(CX18_F_I_EOS, &cx->i_flags);
905 cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK);
906 }
907
908 cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
909 (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
910 (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
911
912 /* Init all the cpu_mdls for this stream */
913 cx18_stream_configure_mdls(s);
914 _cx18_stream_load_fw_queue(s);
915
916 /* begin_capture */
917 if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
918 CX18_DEBUG_WARN("Error starting capture!\n");
919 /* Ensure we're really not capturing before releasing MDLs */
920 set_bit(CX18_F_S_STOPPING, &s->s_flags);
921 if (s->type == CX18_ENC_STREAM_TYPE_MPG)
922 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1);
923 else
924 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
925 clear_bit(CX18_F_S_STREAMING, &s->s_flags);
926 /* FIXME - CX18_F_S_STREAMOFF as well? */
927 cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
928 cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
929 s->handle = CX18_INVALID_TASK_HANDLE;
930 clear_bit(CX18_F_S_STOPPING, &s->s_flags);
931 if (atomic_read(&cx->tot_capturing) == 0) {
932 set_bit(CX18_F_I_EOS, &cx->i_flags);
933 cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
934 }
935 return -EINVAL;
936 }
937
938 /* you're live! sit back and await interrupts :) */
939 if (captype != CAPTURE_CHANNEL_TYPE_TS)
940 atomic_inc(&cx->ana_capturing);
941 atomic_inc(&cx->tot_capturing);
942 return 0;
943 }
944 EXPORT_SYMBOL(cx18_start_v4l2_encode_stream);
945
cx18_stop_all_captures(struct cx18 * cx)946 void cx18_stop_all_captures(struct cx18 *cx)
947 {
948 int i;
949
950 for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) {
951 struct cx18_stream *s = &cx->streams[i];
952
953 if (!cx18_stream_enabled(s))
954 continue;
955 if (test_bit(CX18_F_S_STREAMING, &s->s_flags))
956 cx18_stop_v4l2_encode_stream(s, 0);
957 }
958 }
959
cx18_stop_v4l2_encode_stream(struct cx18_stream * s,int gop_end)960 int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end)
961 {
962 struct cx18 *cx = s->cx;
963
964 if (!cx18_stream_enabled(s))
965 return -EINVAL;
966
967 /* This function assumes that you are allowed to stop the capture
968 and that we are actually capturing */
969
970 CX18_DEBUG_INFO("Stop Capture\n");
971
972 if (atomic_read(&cx->tot_capturing) == 0)
973 return 0;
974
975 set_bit(CX18_F_S_STOPPING, &s->s_flags);
976 if (s->type == CX18_ENC_STREAM_TYPE_MPG)
977 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end);
978 else
979 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
980
981 if (s->type == CX18_ENC_STREAM_TYPE_MPG && gop_end) {
982 CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
983 }
984
985 if (s->type != CX18_ENC_STREAM_TYPE_TS)
986 atomic_dec(&cx->ana_capturing);
987 atomic_dec(&cx->tot_capturing);
988
989 /* Clear capture and no-read bits */
990 clear_bit(CX18_F_S_STREAMING, &s->s_flags);
991
992 /* Tell the CX23418 it can't use our buffers anymore */
993 cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
994
995 cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
996 s->handle = CX18_INVALID_TASK_HANDLE;
997 clear_bit(CX18_F_S_STOPPING, &s->s_flags);
998
999 if (atomic_read(&cx->tot_capturing) > 0)
1000 return 0;
1001
1002 cx2341x_handler_set_busy(&cx->cxhdl, 0);
1003 cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
1004 wake_up(&s->waitq);
1005
1006 return 0;
1007 }
1008 EXPORT_SYMBOL(cx18_stop_v4l2_encode_stream);
1009
cx18_find_handle(struct cx18 * cx)1010 u32 cx18_find_handle(struct cx18 *cx)
1011 {
1012 int i;
1013
1014 /* find first available handle to be used for global settings */
1015 for (i = 0; i < CX18_MAX_STREAMS; i++) {
1016 struct cx18_stream *s = &cx->streams[i];
1017
1018 if (s->video_dev.v4l2_dev && (s->handle != CX18_INVALID_TASK_HANDLE))
1019 return s->handle;
1020 }
1021 return CX18_INVALID_TASK_HANDLE;
1022 }
1023
cx18_handle_to_stream(struct cx18 * cx,u32 handle)1024 struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle)
1025 {
1026 int i;
1027 struct cx18_stream *s;
1028
1029 if (handle == CX18_INVALID_TASK_HANDLE)
1030 return NULL;
1031
1032 for (i = 0; i < CX18_MAX_STREAMS; i++) {
1033 s = &cx->streams[i];
1034 if (s->handle != handle)
1035 continue;
1036 if (cx18_stream_enabled(s))
1037 return s;
1038 }
1039 return NULL;
1040 }
1041