1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * ASCII values for a number of symbolic constants, printing functions,
4 * etc.
5 * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
6 * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
7 * by D. Gilbert and aeb (20020609)
8 * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701
9 */
10
11 #include <linux/blkdev.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14
15 #include <scsi/scsi.h>
16 #include <scsi/scsi_cmnd.h>
17 #include <scsi/scsi_device.h>
18 #include <scsi/scsi_host.h>
19 #include <scsi/scsi_eh.h>
20 #include <scsi/scsi_dbg.h>
21
22 /* Commands with service actions that change the command name */
23 #define THIRD_PARTY_COPY_OUT 0x83
24 #define THIRD_PARTY_COPY_IN 0x84
25
26 struct sa_name_list {
27 int opcode;
28 const struct value_name_pair *arr;
29 int arr_sz;
30 };
31
32 struct value_name_pair {
33 int value;
34 const char * name;
35 };
36
37 static const char * cdb_byte0_names[] = {
38 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
39 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
40 "Reassign Blocks",
41 /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
42 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
43 /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
44 "Reserve(6)",
45 /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
46 /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
47 /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
48 /* 20-22 */ NULL, NULL, NULL,
49 /* 23-28 */ "Read Format Capacities", "Set Window",
50 "Read Capacity(10)", NULL, NULL, "Read(10)",
51 /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
52 "Read updated block",
53 /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
54 /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
55 /* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
56 "Read Defect Data(10)",
57 /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
58 "Read Buffer",
59 /* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
60 /* 40-41 */ "Change Definition", "Write Same(10)",
61 /* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
62 "Read density support", "Play audio(10)", "Get configuration",
63 "Play audio msf", "Sanitize/Play audio track/index",
64 /* 49-4f */ "Play track relative(10)", "Get event status notification",
65 "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
66 NULL,
67 /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
68 "Reserve track", "Send OPC info", "Mode Select(10)",
69 /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
70 "Mode Sense(10)", "Close track/session",
71 /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
72 "Persistent reserve out",
73 /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
74 /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
75 /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
76 /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
77 "Variable length",
78 /* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)",
79 "Third party copy out", "Third party copy in",
80 /* 85-89 */ "ATA command pass through(16)", "Access control in",
81 "Access control out", "Read(16)", "Compare and Write",
82 /* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",
83 "Write and verify(16)", "Verify(16)",
84 /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
85 "Lock/unlock cache(16)", "Write same(16)", NULL,
86 /* 95-99 */ NULL, NULL, NULL, NULL, NULL,
87 /* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional",
88 "Service action in(16)", "Service action out(16)",
89 /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
90 "Security protocol in", "Maintenance in", "Maintenance out",
91 "Move medium/play audio(12)",
92 /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
93 "Play track relative(12)",
94 /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
95 "Read DVD structure", "Write and verify(12)",
96 /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
97 /* b2-b4 */ "Search data low(12)", "Set limits(12)",
98 "Read element status attached",
99 /* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
100 /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
101 /* ba-bc */ "Redundancy group (in), Scan",
102 "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
103 /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
104 "Volume set (out), Send DVD structure",
105 };
106
107 static const struct value_name_pair maint_in_arr[] = {
108 {0x5, "Report identifying information"},
109 {0xa, "Report target port groups"},
110 {0xb, "Report aliases"},
111 {0xc, "Report supported operation codes"},
112 {0xd, "Report supported task management functions"},
113 {0xe, "Report priority"},
114 {0xf, "Report timestamp"},
115 {0x10, "Management protocol in"},
116 };
117 #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
118
119 static const struct value_name_pair maint_out_arr[] = {
120 {0x6, "Set identifying information"},
121 {0xa, "Set target port groups"},
122 {0xb, "Change aliases"},
123 {0xc, "Remove I_T nexus"},
124 {0xe, "Set priority"},
125 {0xf, "Set timestamp"},
126 {0x10, "Management protocol out"},
127 };
128 #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
129
130 static const struct value_name_pair serv_in12_arr[] = {
131 {0x1, "Read media serial number"},
132 };
133 #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)
134
135 static const struct value_name_pair serv_out12_arr[] = {
136 {-1, "dummy entry"},
137 };
138 #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
139
140 static const struct value_name_pair serv_bidi_arr[] = {
141 {-1, "dummy entry"},
142 };
143 #define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr)
144
145 static const struct value_name_pair serv_in16_arr[] = {
146 {0x10, "Read capacity(16)"},
147 {0x11, "Read long(16)"},
148 {0x12, "Get LBA status"},
149 {0x13, "Report referrals"},
150 };
151 #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
152
153 static const struct value_name_pair serv_out16_arr[] = {
154 {0x11, "Write long(16)"},
155 {0x1f, "Notify data transfer device(16)"},
156 };
157 #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
158
159 static const struct value_name_pair pr_in_arr[] = {
160 {0x0, "Persistent reserve in, read keys"},
161 {0x1, "Persistent reserve in, read reservation"},
162 {0x2, "Persistent reserve in, report capabilities"},
163 {0x3, "Persistent reserve in, read full status"},
164 };
165 #define PR_IN_SZ ARRAY_SIZE(pr_in_arr)
166
167 static const struct value_name_pair pr_out_arr[] = {
168 {0x0, "Persistent reserve out, register"},
169 {0x1, "Persistent reserve out, reserve"},
170 {0x2, "Persistent reserve out, release"},
171 {0x3, "Persistent reserve out, clear"},
172 {0x4, "Persistent reserve out, preempt"},
173 {0x5, "Persistent reserve out, preempt and abort"},
174 {0x6, "Persistent reserve out, register and ignore existing key"},
175 {0x7, "Persistent reserve out, register and move"},
176 };
177 #define PR_OUT_SZ ARRAY_SIZE(pr_out_arr)
178
179 /* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out.
180 LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2
181 and SPC-3 */
182 static const struct value_name_pair tpc_out_arr[] = {
183 {0x0, "Extended copy(LID1)"},
184 {0x1, "Extended copy(LID4)"},
185 {0x10, "Populate token"},
186 {0x11, "Write using token"},
187 {0x1c, "Copy operation abort"},
188 };
189 #define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr)
190
191 static const struct value_name_pair tpc_in_arr[] = {
192 {0x0, "Receive copy status(LID1)"},
193 {0x1, "Receive copy data(LID1)"},
194 {0x3, "Receive copy operating parameters"},
195 {0x4, "Receive copy failure details(LID1)"},
196 {0x5, "Receive copy status(LID4)"},
197 {0x6, "Receive copy data(LID4)"},
198 {0x7, "Receive ROD token information"},
199 {0x8, "Report all ROD tokens"},
200 };
201 #define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr)
202
203
204 static const struct value_name_pair variable_length_arr[] = {
205 {0x1, "Rebuild(32)"},
206 {0x2, "Regenerate(32)"},
207 {0x3, "Xdread(32)"},
208 {0x4, "Xdwrite(32)"},
209 {0x5, "Xdwrite extended(32)"},
210 {0x6, "Xpwrite(32)"},
211 {0x7, "Xdwriteread(32)"},
212 {0x8, "Xdwrite extended(64)"},
213 {0x9, "Read(32)"},
214 {0xa, "Verify(32)"},
215 {0xb, "Write(32)"},
216 {0xc, "Write an verify(32)"},
217 {0xd, "Write same(32)"},
218 {0x8801, "Format OSD"},
219 {0x8802, "Create (osd)"},
220 {0x8803, "List (osd)"},
221 {0x8805, "Read (osd)"},
222 {0x8806, "Write (osd)"},
223 {0x8807, "Append (osd)"},
224 {0x8808, "Flush (osd)"},
225 {0x880a, "Remove (osd)"},
226 {0x880b, "Create partition (osd)"},
227 {0x880c, "Remove partition (osd)"},
228 {0x880e, "Get attributes (osd)"},
229 {0x880f, "Set attributes (osd)"},
230 {0x8812, "Create and write (osd)"},
231 {0x8815, "Create collection (osd)"},
232 {0x8816, "Remove collection (osd)"},
233 {0x8817, "List collection (osd)"},
234 {0x8818, "Set key (osd)"},
235 {0x8819, "Set master key (osd)"},
236 {0x881a, "Flush collection (osd)"},
237 {0x881b, "Flush partition (osd)"},
238 {0x881c, "Flush OSD"},
239 {0x8f7e, "Perform SCSI command (osd)"},
240 {0x8f7f, "Perform task management function (osd)"},
241 };
242 #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
243
244 static struct sa_name_list sa_names_arr[] = {
245 {VARIABLE_LENGTH_CMD, variable_length_arr, VARIABLE_LENGTH_SZ},
246 {MAINTENANCE_IN, maint_in_arr, MAINT_IN_SZ},
247 {MAINTENANCE_OUT, maint_out_arr, MAINT_OUT_SZ},
248 {PERSISTENT_RESERVE_IN, pr_in_arr, PR_IN_SZ},
249 {PERSISTENT_RESERVE_OUT, pr_out_arr, PR_OUT_SZ},
250 {SERVICE_ACTION_IN_12, serv_in12_arr, SERV_IN12_SZ},
251 {SERVICE_ACTION_OUT_12, serv_out12_arr, SERV_OUT12_SZ},
252 {SERVICE_ACTION_BIDIRECTIONAL, serv_bidi_arr, SERV_BIDI_SZ},
253 {SERVICE_ACTION_IN_16, serv_in16_arr, SERV_IN16_SZ},
254 {SERVICE_ACTION_OUT_16, serv_out16_arr, SERV_OUT16_SZ},
255 {THIRD_PARTY_COPY_IN, tpc_in_arr, TPC_IN_SZ},
256 {THIRD_PARTY_COPY_OUT, tpc_out_arr, TPC_OUT_SZ},
257 {0, NULL, 0},
258 };
259
scsi_opcode_sa_name(int opcode,int service_action,const char ** cdb_name,const char ** sa_name)260 bool scsi_opcode_sa_name(int opcode, int service_action,
261 const char **cdb_name, const char **sa_name)
262 {
263 struct sa_name_list *sa_name_ptr;
264 const struct value_name_pair *arr = NULL;
265 int arr_sz, k;
266
267 *cdb_name = NULL;
268 if (opcode >= VENDOR_SPECIFIC_CDB)
269 return false;
270
271 if (opcode < ARRAY_SIZE(cdb_byte0_names))
272 *cdb_name = cdb_byte0_names[opcode];
273
274 for (sa_name_ptr = sa_names_arr; sa_name_ptr->arr; ++sa_name_ptr) {
275 if (sa_name_ptr->opcode == opcode) {
276 arr = sa_name_ptr->arr;
277 arr_sz = sa_name_ptr->arr_sz;
278 break;
279 }
280 }
281 if (!arr)
282 return false;
283
284 for (k = 0; k < arr_sz; ++k, ++arr) {
285 if (service_action == arr->value)
286 break;
287 }
288 if (k < arr_sz)
289 *sa_name = arr->name;
290
291 return true;
292 }
293
294 struct error_info {
295 unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
296 unsigned short size;
297 };
298
299 /*
300 * There are 700+ entries in this table. To save space, we don't store
301 * (code, pointer) pairs, which would make sizeof(struct
302 * error_info)==16 on 64 bits. Rather, the second element just stores
303 * the size (including \0) of the corresponding string, and we use the
304 * sum of these to get the appropriate offset into additional_text
305 * defined below. This approach saves 12 bytes per entry.
306 */
307 static const struct error_info additional[] =
308 {
309 #define SENSE_CODE(c, s) {c, sizeof(s)},
310 #include "sense_codes.h"
311 #undef SENSE_CODE
312 };
313
314 static const char *additional_text =
315 #define SENSE_CODE(c, s) s "\0"
316 #include "sense_codes.h"
317 #undef SENSE_CODE
318 ;
319
320 struct error_info2 {
321 unsigned char code1, code2_min, code2_max;
322 const char * str;
323 const char * fmt;
324 };
325
326 static const struct error_info2 additional2[] =
327 {
328 {0x40, 0x00, 0x7f, "Ram failure", ""},
329 {0x40, 0x80, 0xff, "Diagnostic failure on component", ""},
330 {0x41, 0x00, 0xff, "Data path failure", ""},
331 {0x42, 0x00, 0xff, "Power-on or self-test failure", ""},
332 {0x4D, 0x00, 0xff, "Tagged overlapped commands", "task tag "},
333 {0x70, 0x00, 0xff, "Decompression exception", "short algorithm id of "},
334 {0, 0, 0, NULL, NULL}
335 };
336
337 /* description of the sense key values */
338 static const char * const snstext[] = {
339 "No Sense", /* 0: There is no sense information */
340 "Recovered Error", /* 1: The last command completed successfully
341 but used error correction */
342 "Not Ready", /* 2: The addressed target is not ready */
343 "Medium Error", /* 3: Data error detected on the medium */
344 "Hardware Error", /* 4: Controller or device failure */
345 "Illegal Request", /* 5: Error in request */
346 "Unit Attention", /* 6: Removable medium was changed, or
347 the target has been reset, or ... */
348 "Data Protect", /* 7: Access to the data is blocked */
349 "Blank Check", /* 8: Reached unexpected written or unwritten
350 region of the medium */
351 "Vendor Specific(9)",
352 "Copy Aborted", /* A: COPY or COMPARE was aborted */
353 "Aborted Command", /* B: The target aborted the command */
354 "Equal", /* C: A SEARCH DATA command found data equal,
355 reserved in SPC-4 rev 36 */
356 "Volume Overflow", /* D: Medium full with still data to be written */
357 "Miscompare", /* E: Source data and data on the medium
358 do not agree */
359 "Completed", /* F: command completed sense data reported,
360 may occur for successful command */
361 };
362
363 /* Get sense key string or NULL if not available */
364 const char *
scsi_sense_key_string(unsigned char key)365 scsi_sense_key_string(unsigned char key)
366 {
367 if (key < ARRAY_SIZE(snstext))
368 return snstext[key];
369 return NULL;
370 }
371 EXPORT_SYMBOL(scsi_sense_key_string);
372
373 /*
374 * Get additional sense code string or NULL if not available.
375 * This string may contain a "%x" and should be printed with ascq as arg.
376 */
377 const char *
scsi_extd_sense_format(unsigned char asc,unsigned char ascq,const char ** fmt)378 scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
379 {
380 int i;
381 unsigned short code = ((asc << 8) | ascq);
382 unsigned offset = 0;
383
384 *fmt = NULL;
385 for (i = 0; i < ARRAY_SIZE(additional); i++) {
386 if (additional[i].code12 == code)
387 return additional_text + offset;
388 offset += additional[i].size;
389 }
390 for (i = 0; additional2[i].fmt; i++) {
391 if (additional2[i].code1 == asc &&
392 ascq >= additional2[i].code2_min &&
393 ascq <= additional2[i].code2_max) {
394 *fmt = additional2[i].fmt;
395 return additional2[i].str;
396 }
397 }
398 return NULL;
399 }
400 EXPORT_SYMBOL(scsi_extd_sense_format);
401
402 static const char * const hostbyte_table[]={
403 "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
404 "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
405 "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
406 "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE",
407 "DID_NEXUS_FAILURE", "DID_ALLOC_FAILURE", "DID_MEDIUM_ERROR" };
408
scsi_hostbyte_string(int result)409 const char *scsi_hostbyte_string(int result)
410 {
411 enum scsi_host_status hb = host_byte(result);
412 const char *hb_string = NULL;
413
414 if (hb < ARRAY_SIZE(hostbyte_table))
415 hb_string = hostbyte_table[hb];
416 return hb_string;
417 }
418 EXPORT_SYMBOL(scsi_hostbyte_string);
419
420 #define scsi_mlreturn_name(result) { result, #result }
421 static const struct value_name_pair scsi_mlreturn_arr[] = {
422 scsi_mlreturn_name(NEEDS_RETRY),
423 scsi_mlreturn_name(SUCCESS),
424 scsi_mlreturn_name(FAILED),
425 scsi_mlreturn_name(QUEUED),
426 scsi_mlreturn_name(SOFT_ERROR),
427 scsi_mlreturn_name(ADD_TO_MLQUEUE),
428 scsi_mlreturn_name(TIMEOUT_ERROR),
429 scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED),
430 scsi_mlreturn_name(FAST_IO_FAIL)
431 };
432
scsi_mlreturn_string(int result)433 const char *scsi_mlreturn_string(int result)
434 {
435 const struct value_name_pair *arr = scsi_mlreturn_arr;
436 int k;
437
438 for (k = 0; k < ARRAY_SIZE(scsi_mlreturn_arr); ++k, ++arr) {
439 if (result == arr->value)
440 return arr->name;
441 }
442 return NULL;
443 }
444 EXPORT_SYMBOL(scsi_mlreturn_string);
445