• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 
4     bttv-cards.c
5 
6     this file has configuration information - card-specific stuff
7     like the big tvcards array for the most part
8 
9     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
10 			   & Marcus Metzler (mocm@thp.uni-koeln.de)
11     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 
13 
14 */
15 
16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
17 
18 #include <linux/delay.h>
19 #include <linux/module.h>
20 #include <linux/kmod.h>
21 #include <linux/init.h>
22 #include <linux/pci.h>
23 #include <linux/vmalloc.h>
24 #include <linux/firmware.h>
25 #include <net/checksum.h>
26 
27 #include <asm/unaligned.h>
28 #include <asm/io.h>
29 
30 #include "bttvp.h"
31 #include <media/v4l2-common.h>
32 #include <media/i2c/tvaudio.h>
33 #include "bttv-audio-hook.h"
34 
35 /* fwd decl */
36 static void boot_msp34xx(struct bttv *btv, int pin);
37 static void hauppauge_eeprom(struct bttv *btv);
38 static void avermedia_eeprom(struct bttv *btv);
39 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
40 static void modtec_eeprom(struct bttv *btv);
41 static void init_PXC200(struct bttv *btv);
42 static void init_RTV24(struct bttv *btv);
43 static void init_PCI8604PW(struct bttv *btv);
44 
45 static void rv605_muxsel(struct bttv *btv, unsigned int input);
46 static void eagle_muxsel(struct bttv *btv, unsigned int input);
47 static void xguard_muxsel(struct bttv *btv, unsigned int input);
48 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
49 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
50 
51 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
52 
53 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
54 static void picolo_tetra_init(struct bttv *btv);
55 
56 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
57 static void tibetCS16_init(struct bttv *btv);
58 
59 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
60 static void kodicom4400r_init(struct bttv *btv);
61 
62 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
63 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
64 
65 static void geovision_muxsel(struct bttv *btv, unsigned int input);
66 
67 static void phytec_muxsel(struct bttv *btv, unsigned int input);
68 
69 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
70 static void gv800s_init(struct bttv *btv);
71 
72 static void td3116_muxsel(struct bttv *btv, unsigned int input);
73 
74 static int terratec_active_radio_upgrade(struct bttv *btv);
75 static int tea575x_init(struct bttv *btv);
76 static void identify_by_eeprom(struct bttv *btv,
77 			       unsigned char eeprom_data[256]);
78 static int pvr_boot(struct bttv *btv);
79 
80 /* config variables */
81 static unsigned int triton1;
82 static unsigned int vsfx;
83 static unsigned int latency = UNSET;
84 int no_overlay=-1;
85 
86 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
87 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
88 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
89 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
90 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
91 static unsigned int audiodev[BTTV_MAX];
92 static unsigned int saa6588[BTTV_MAX];
93 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
94 static unsigned int autoload = UNSET;
95 static unsigned int gpiomask = UNSET;
96 static unsigned int audioall = UNSET;
97 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
98 
99 /* insmod options */
100 module_param(triton1,    int, 0444);
101 module_param(vsfx,       int, 0444);
102 module_param(no_overlay, int, 0444);
103 module_param(latency,    int, 0444);
104 module_param(gpiomask,   int, 0444);
105 module_param(audioall,   int, 0444);
106 module_param(autoload,   int, 0444);
107 
108 module_param_array(card,     int, NULL, 0444);
109 module_param_array(pll,      int, NULL, 0444);
110 module_param_array(tuner,    int, NULL, 0444);
111 module_param_array(svhs,     int, NULL, 0444);
112 module_param_array(remote,   int, NULL, 0444);
113 module_param_array(audiodev, int, NULL, 0444);
114 module_param_array(audiomux, int, NULL, 0444);
115 
116 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
117 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
118 MODULE_PARM_DESC(latency,"pci latency timer");
119 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
120 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
121 MODULE_PARM_DESC(tuner,"specify installed tuner type");
122 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
123 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
124 		"\t\t-1 = no audio\n"
125 		"\t\t 0 = autodetect (default)\n"
126 		"\t\t 1 = msp3400\n"
127 		"\t\t 2 = tda7432\n"
128 		"\t\t 3 = tvaudio");
129 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
130 MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
131 
132 
133 /* I2C addresses list */
134 #define I2C_ADDR_TDA7432	0x8a
135 #define I2C_ADDR_MSP3400	0x80
136 #define I2C_ADDR_MSP3400_ALT	0x88
137 
138 
139 /* ----------------------------------------------------------------------- */
140 /* list of card IDs for bt878+ cards                                       */
141 
142 static struct CARD {
143 	unsigned id;
144 	int cardnr;
145 	char *name;
146 } cards[] = {
147 	{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
148 	{ 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
149 	{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
150 	{ 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
151 	{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
152 	{ 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
153 	{ 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
154 	{ 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
155 	{ 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
156 
157 	{ 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
158 	{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
159 
160 	{ 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
161 	{ 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
162 	{ 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
163 	{ 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
164 	{ 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
165 	{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
166 	{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
167 	{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
168 	{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
169 
170 	{ 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
171 	/* some cards ship with byteswapped IDs ... */
172 	{ 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
173 	{ 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
174 	/* this seems to happen as well ... */
175 	{ 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
176 
177 	{ 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
178 	{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
179 	{ 0x3060121a, BTTV_BOARD_STB2,	  "3Dfx VoodooTV 100/ STB OEM" },
180 
181 	{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
182 	{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
183 	{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
184 	{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
185 	{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
186 	{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
187 	{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
188 
189 	{ 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
190 	{ 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
191 	{ 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
192 	{ 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
193 	{ 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
194 
195 	{ 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
196 	{ 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
197 	{ 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
198 	{ 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
199 
200 	{ 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
201 	{ 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
202 	/* clashes with FlyVideo
203 	 *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
204 	{ 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
205 	{ 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
206 	{ 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
207 	{ 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
208 
209 	{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
210 	{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
211 	{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
212 	{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
213 	{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
214 
215 	{ 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
216 	{ 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
217 	{ 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
218 	{ 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
219 	{ 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
220 
221 	{ 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
222 	{ 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
223 	{ 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
224 	{ 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
225 
226 	{ 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
227 	{ 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
228 	{ 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
229 	{ 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
230 
231 	{ 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
232 	{ 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
233 	{ 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
234 	{ 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
235 	{ 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
236 	{ 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
237 	{ 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
238 	{ 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
239 	{ 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
240 	{ 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
241 	{ 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
242 	{ 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
243 	{ 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
244 	{ 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
245 	{ 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
246 	{ 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
247 	{ 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
248 	{ 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
249 	{ 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
250 	{ 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
251 	{ 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
252 	{ 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
253 	{ 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
254 	{ 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
255 	{ 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
256 	{ 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
257 	{ 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
258 	{ 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
259 	{ 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
260 	{ 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
261 	{ 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
262 	{ 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
263 	{ 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
264 
265 	{ 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
266 	{ 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
267 
268 	{ 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
269 	{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
270 	{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
271 	{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
272 	{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
273 	{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
274 
275 	{ 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
276 	{ 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
277 
278 	{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
279 	{ 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
280 	{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
281 	{ 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
282 	{ 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
283 	{ 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
284 	{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
285 	{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
286 	{ 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
287 	{ 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
288 
289 	{ 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
290 	{ 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
291 
292 	{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
293 	{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
294 	{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
295 	{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
296 
297 	{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
298 
299 	{ 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
300 	{ 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
301 
302 	/* likely broken, vendor id doesn't match the other magic views ...
303 	 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
304 
305 	/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
306 	* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
307 
308 	{ 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,	"Conceptronic CTVFMi v2"},
309 
310 	/* DVB cards (using pci function .1 for mpeg data xfer) */
311 	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
312 	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
313 	{ 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
314 	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
315 	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
316 	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
317 	{ 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
318 	{ 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
319 	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
320 	{ 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
321 	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
322 	{ 0x00261822, BTTV_BOARD_TWINHAN_DST,	"DNTV Live! Mini "},
323 	{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,	"DViCO FusionHDTV 2" },
324 	{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600,	"GeoVision GV-600" },
325 	{ 0x18011000, BTTV_BOARD_ENLTV_FM_2,	"Encore ENL TV-FM-2" },
326 	{ 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
327 	{ 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,	"GeoVision GV-800(S) (slave)" },
328 	{ 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,	"GeoVision GV-800(S) (slave)" },
329 	{ 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,	"GeoVision GV-800(S) (slave)" },
330 
331 	{ 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
332 	{ 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
333 	{ 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
334 	{ 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
335 	{ 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
336 	{ 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
337 	{ 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
338 	{ 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
339 	{ 0x3116f200, BTTV_BOARD_TVT_TD3116,	"Tongwei Video Technology TD-3116" },
340 	{ 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
341 	{ 0, -1, NULL }
342 };
343 
344 /* ----------------------------------------------------------------------- */
345 /* array with description for bt848 / bt878 tv/grabber cards               */
346 
347 struct tvcard bttv_tvcards[] = {
348 	/* ---- card 0x00 ---------------------------------- */
349 	[BTTV_BOARD_UNKNOWN] = {
350 		.name		= " *** UNKNOWN/GENERIC *** ",
351 		.video_inputs	= 4,
352 		.svhs		= 2,
353 		.muxsel		= MUXSEL(2, 3, 1, 0),
354 		.tuner_type	= UNSET,
355 		.tuner_addr	= ADDR_UNSET,
356 	},
357 	[BTTV_BOARD_MIRO] = {
358 		.name		= "MIRO PCTV",
359 		.video_inputs	= 4,
360 		/* .audio_inputs= 1, */
361 		.svhs		= 2,
362 		.gpiomask	= 15,
363 		.muxsel		= MUXSEL(2, 3, 1, 1),
364 		.gpiomux	= { 2, 0, 0, 0 },
365 		.gpiomute	= 10,
366 		.tuner_type	= UNSET,
367 		.tuner_addr	= ADDR_UNSET,
368 	},
369 	[BTTV_BOARD_HAUPPAUGE] = {
370 		.name		= "Hauppauge (bt848)",
371 		.video_inputs	= 4,
372 		/* .audio_inputs= 1, */
373 		.svhs		= 2,
374 		.gpiomask	= 7,
375 		.muxsel		= MUXSEL(2, 3, 1, 1),
376 		.gpiomux	= { 0, 1, 2, 3 },
377 		.gpiomute	= 4,
378 		.tuner_type	= UNSET,
379 		.tuner_addr	= ADDR_UNSET,
380 	},
381 	[BTTV_BOARD_STB] = {
382 		.name		= "STB, Gateway P/N 6000699 (bt848)",
383 		.video_inputs	= 3,
384 		/* .audio_inputs= 1, */
385 		.svhs		= 2,
386 		.gpiomask	= 7,
387 		.muxsel		= MUXSEL(2, 3, 1, 1),
388 		.gpiomux	= { 4, 0, 2, 3 },
389 		.gpiomute	= 1,
390 		.no_msp34xx	= 1,
391 		.tuner_type     = TUNER_PHILIPS_NTSC,
392 		.tuner_addr	= ADDR_UNSET,
393 		.pll            = PLL_28,
394 		.has_radio      = 1,
395 	},
396 
397 	/* ---- card 0x04 ---------------------------------- */
398 	[BTTV_BOARD_INTEL] = {
399 		.name		= "Intel Create and Share PCI/ Smart Video Recorder III",
400 		.video_inputs	= 4,
401 		/* .audio_inputs= 0, */
402 		.svhs		= 2,
403 		.gpiomask	= 0,
404 		.muxsel		= MUXSEL(2, 3, 1, 1),
405 		.gpiomux	= { 0 },
406 		.tuner_type	= TUNER_ABSENT,
407 		.tuner_addr	= ADDR_UNSET,
408 	},
409 	[BTTV_BOARD_DIAMOND] = {
410 		.name		= "Diamond DTV2000",
411 		.video_inputs	= 4,
412 		/* .audio_inputs= 1, */
413 		.svhs		= 2,
414 		.gpiomask	= 3,
415 		.muxsel		= MUXSEL(2, 3, 1, 0),
416 		.gpiomux	= { 0, 1, 0, 1 },
417 		.gpiomute	= 3,
418 		.tuner_type	= UNSET,
419 		.tuner_addr	= ADDR_UNSET,
420 	},
421 	[BTTV_BOARD_AVERMEDIA] = {
422 		.name		= "AVerMedia TVPhone",
423 		.video_inputs	= 3,
424 		/* .audio_inputs= 1, */
425 		.svhs		= 3,
426 		.muxsel		= MUXSEL(2, 3, 1, 1),
427 		.gpiomask	= 0x0f,
428 		.gpiomux	= { 0x0c, 0x04, 0x08, 0x04 },
429 		/*                0x04 for some cards ?? */
430 		.tuner_type	= UNSET,
431 		.tuner_addr	= ADDR_UNSET,
432 		.audio_mode_gpio= avermedia_tvphone_audio,
433 		.has_remote     = 1,
434 	},
435 	[BTTV_BOARD_MATRIX_VISION] = {
436 		.name		= "MATRIX-Vision MV-Delta",
437 		.video_inputs	= 5,
438 		/* .audio_inputs= 1, */
439 		.svhs		= 3,
440 		.gpiomask	= 0,
441 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
442 		.gpiomux	= { 0 },
443 		.tuner_type	= TUNER_ABSENT,
444 		.tuner_addr	= ADDR_UNSET,
445 	},
446 
447 	/* ---- card 0x08 ---------------------------------- */
448 	[BTTV_BOARD_FLYVIDEO] = {
449 		.name		= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
450 		.video_inputs	= 4,
451 		/* .audio_inputs= 1, */
452 		.svhs		= 2,
453 		.gpiomask	= 0xc00,
454 		.muxsel		= MUXSEL(2, 3, 1, 1),
455 		.gpiomux	= { 0, 0xc00, 0x800, 0x400 },
456 		.gpiomute	= 0xc00,
457 		.pll		= PLL_28,
458 		.tuner_type	= UNSET,
459 		.tuner_addr	= ADDR_UNSET,
460 	},
461 	[BTTV_BOARD_TURBOTV] = {
462 		.name		= "IMS/IXmicro TurboTV",
463 		.video_inputs	= 3,
464 		/* .audio_inputs= 1, */
465 		.svhs		= 2,
466 		.gpiomask	= 3,
467 		.muxsel		= MUXSEL(2, 3, 1, 1),
468 		.gpiomux	= { 1, 1, 2, 3 },
469 		.pll		= PLL_28,
470 		.tuner_type	= TUNER_TEMIC_PAL,
471 		.tuner_addr	= ADDR_UNSET,
472 	},
473 	[BTTV_BOARD_HAUPPAUGE878] = {
474 		.name		= "Hauppauge (bt878)",
475 		.video_inputs	= 4,
476 		/* .audio_inputs= 1, */
477 		.svhs		= 2,
478 		.gpiomask	= 0x0f, /* old: 7 */
479 		.muxsel		= MUXSEL(2, 0, 1, 1),
480 		.gpiomux	= { 0, 1, 2, 3 },
481 		.gpiomute	= 4,
482 		.pll		= PLL_28,
483 		.tuner_type	= UNSET,
484 		.tuner_addr	= ADDR_UNSET,
485 	},
486 	[BTTV_BOARD_MIROPRO] = {
487 		.name		= "MIRO PCTV pro",
488 		.video_inputs	= 3,
489 		/* .audio_inputs= 1, */
490 		.svhs		= 2,
491 		.gpiomask	= 0x3014f,
492 		.muxsel		= MUXSEL(2, 3, 1, 1),
493 		.gpiomux	= { 0x20001,0x10001, 0, 0 },
494 		.gpiomute	= 10,
495 		.tuner_type	= UNSET,
496 		.tuner_addr	= ADDR_UNSET,
497 	},
498 
499 	/* ---- card 0x0c ---------------------------------- */
500 	[BTTV_BOARD_ADSTECH_TV] = {
501 		.name		= "ADS Technologies Channel Surfer TV (bt848)",
502 		.video_inputs	= 3,
503 		/* .audio_inputs= 1, */
504 		.svhs		= 2,
505 		.gpiomask	= 15,
506 		.muxsel		= MUXSEL(2, 3, 1, 1),
507 		.gpiomux	= { 13, 14, 11, 7 },
508 		.tuner_type	= UNSET,
509 		.tuner_addr	= ADDR_UNSET,
510 	},
511 	[BTTV_BOARD_AVERMEDIA98] = {
512 		.name		= "AVerMedia TVCapture 98",
513 		.video_inputs	= 3,
514 		/* .audio_inputs= 4, */
515 		.svhs		= 2,
516 		.gpiomask	= 15,
517 		.muxsel		= MUXSEL(2, 3, 1, 1),
518 		.gpiomux	= { 13, 14, 11, 7 },
519 		.msp34xx_alt    = 1,
520 		.pll		= PLL_28,
521 		.tuner_type	= TUNER_PHILIPS_PAL,
522 		.tuner_addr	= ADDR_UNSET,
523 		.audio_mode_gpio= avermedia_tv_stereo_audio,
524 		.no_gpioirq     = 1,
525 	},
526 	[BTTV_BOARD_VHX] = {
527 		.name		= "Aimslab Video Highway Xtreme (VHX)",
528 		.video_inputs	= 3,
529 		/* .audio_inputs= 1, */
530 		.svhs		= 2,
531 		.gpiomask	= 7,
532 		.muxsel		= MUXSEL(2, 3, 1, 1),
533 		.gpiomux	= { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
534 		.gpiomute	= 4,
535 		.pll		= PLL_28,
536 		.tuner_type	= UNSET,
537 		.tuner_addr	= ADDR_UNSET,
538 	},
539 	[BTTV_BOARD_ZOLTRIX] = {
540 		.name		= "Zoltrix TV-Max",
541 		.video_inputs	= 3,
542 		/* .audio_inputs= 1, */
543 		.svhs		= 2,
544 		.gpiomask	= 15,
545 		.muxsel		= MUXSEL(2, 3, 1, 1),
546 		.gpiomux	= { 0, 0, 1, 0 },
547 		.gpiomute	= 10,
548 		.tuner_type	= UNSET,
549 		.tuner_addr	= ADDR_UNSET,
550 	},
551 
552 	/* ---- card 0x10 ---------------------------------- */
553 	[BTTV_BOARD_PIXVIEWPLAYTV] = {
554 		.name		= "Prolink Pixelview PlayTV (bt878)",
555 		.video_inputs	= 3,
556 		/* .audio_inputs= 1, */
557 		.svhs		= 2,
558 		.gpiomask	= 0x01fe00,
559 		.muxsel		= MUXSEL(2, 3, 1, 1),
560 		/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
561 		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
562 		.gpiomute	= 0x002000,
563 		.pll		= PLL_28,
564 		.tuner_type	= UNSET,
565 		.tuner_addr     = ADDR_UNSET,
566 	},
567 	[BTTV_BOARD_WINVIEW_601] = {
568 		.name		= "Leadtek WinView 601",
569 		.video_inputs	= 3,
570 		/* .audio_inputs= 1, */
571 		.svhs		= 2,
572 		.gpiomask	= 0x8300f8,
573 		.muxsel		= MUXSEL(2, 3, 1, 1, 0),
574 		.gpiomux	= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
575 		.gpiomute	= 0xcfa007,
576 		.tuner_type	= UNSET,
577 		.tuner_addr	= ADDR_UNSET,
578 		.volume_gpio	= winview_volume,
579 		.has_radio	= 1,
580 	},
581 	[BTTV_BOARD_AVEC_INTERCAP] = {
582 		.name		= "AVEC Intercapture",
583 		.video_inputs	= 3,
584 		/* .audio_inputs= 2, */
585 		.svhs		= 2,
586 		.gpiomask	= 0,
587 		.muxsel		= MUXSEL(2, 3, 1, 1),
588 		.gpiomux	= { 1, 0, 0, 0 },
589 		.tuner_type	= UNSET,
590 		.tuner_addr	= ADDR_UNSET,
591 	},
592 	[BTTV_BOARD_LIFE_FLYKIT] = {
593 		.name		= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
594 		.video_inputs	= 4,
595 		/* .audio_inputs= 1, */
596 		.svhs		= NO_SVHS,
597 		.gpiomask	= 0x8dff00,
598 		.muxsel		= MUXSEL(2, 3, 1, 1),
599 		.gpiomux	= { 0 },
600 		.no_msp34xx	= 1,
601 		.tuner_type	= TUNER_ABSENT,
602 		.tuner_addr	= ADDR_UNSET,
603 	},
604 
605 	/* ---- card 0x14 ---------------------------------- */
606 	[BTTV_BOARD_CEI_RAFFLES] = {
607 		.name		= "CEI Raffles Card",
608 		.video_inputs	= 3,
609 		/* .audio_inputs= 3, */
610 		.svhs		= 2,
611 		.muxsel		= MUXSEL(2, 3, 1, 1),
612 		.tuner_type	= UNSET,
613 		.tuner_addr	= ADDR_UNSET,
614 	},
615 	[BTTV_BOARD_CONFERENCETV] = {
616 		.name		= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
617 		.video_inputs	= 4,
618 		/* .audio_inputs= 2,  tuner, line in */
619 		.svhs		= 2,
620 		.gpiomask	= 0x1800,
621 		.muxsel		= MUXSEL(2, 3, 1, 1),
622 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
623 		.gpiomute	= 0x1800,
624 		.pll		= PLL_28,
625 		.tuner_type	= TUNER_PHILIPS_PAL_I,
626 		.tuner_addr	= ADDR_UNSET,
627 	},
628 	[BTTV_BOARD_PHOEBE_TVMAS] = {
629 		.name		= "Askey CPH050/ Phoebe Tv Master + FM",
630 		.video_inputs	= 3,
631 		/* .audio_inputs= 1, */
632 		.svhs		= 2,
633 		.gpiomask	= 0xc00,
634 		.muxsel		= MUXSEL(2, 3, 1, 1),
635 		.gpiomux	= { 0, 1, 0x800, 0x400 },
636 		.gpiomute	= 0xc00,
637 		.pll		= PLL_28,
638 		.tuner_type	= UNSET,
639 		.tuner_addr	= ADDR_UNSET,
640 	},
641 	[BTTV_BOARD_MODTEC_205] = {
642 		.name		= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
643 		.video_inputs	= 3,
644 		/* .audio_inputs= 1, */
645 		.svhs		= NO_SVHS,
646 		.has_dig_in	= 1,
647 		.gpiomask	= 7,
648 		.muxsel		= MUXSEL(2, 3, 0), /* input 2 is digital */
649 		/* .digital_mode= DIGITAL_MODE_CAMERA, */
650 		.gpiomux	= { 0, 0, 0, 0 },
651 		.no_msp34xx	= 1,
652 		.pll            = PLL_28,
653 		.tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
654 		.tuner_addr	= ADDR_UNSET,
655 	},
656 
657 	/* ---- card 0x18 ---------------------------------- */
658 	[BTTV_BOARD_MAGICTVIEW061] = {
659 		.name		= "Askey CPH05X/06X (bt878) [many vendors]",
660 		.video_inputs	= 3,
661 		/* .audio_inputs= 1, */
662 		.svhs		= 2,
663 		.gpiomask	= 0xe00,
664 		.muxsel		= MUXSEL(2, 3, 1, 1),
665 		.gpiomux	= {0x400, 0x400, 0x400, 0x400 },
666 		.gpiomute	= 0xc00,
667 		.pll		= PLL_28,
668 		.tuner_type	= UNSET,
669 		.tuner_addr	= ADDR_UNSET,
670 		.has_remote     = 1,
671 		.has_radio	= 1,  /* not every card has radio */
672 	},
673 	[BTTV_BOARD_VOBIS_BOOSTAR] = {
674 		.name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
675 		.video_inputs	= 3,
676 		/* .audio_inputs= 1, */
677 		.svhs		= 2,
678 		.gpiomask       = 0x1f0fff,
679 		.muxsel		= MUXSEL(2, 3, 1, 1),
680 		.gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
681 		.gpiomute	= 0x40000,
682 		.tuner_type	= TUNER_PHILIPS_PAL,
683 		.tuner_addr	= ADDR_UNSET,
684 		.audio_mode_gpio= terratv_audio,
685 	},
686 	[BTTV_BOARD_HAUPPAUG_WCAM] = {
687 		.name		= "Hauppauge WinCam newer (bt878)",
688 		.video_inputs	= 4,
689 		/* .audio_inputs= 1, */
690 		.svhs		= 3,
691 		.gpiomask	= 7,
692 		.muxsel		= MUXSEL(2, 0, 1, 1),
693 		.gpiomux	= { 0, 1, 2, 3 },
694 		.gpiomute	= 4,
695 		.tuner_type	= UNSET,
696 		.tuner_addr	= ADDR_UNSET,
697 	},
698 	[BTTV_BOARD_MAXI] = {
699 		.name		= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
700 		.video_inputs	= 4,
701 		/* .audio_inputs= 2, */
702 		.svhs		= 2,
703 		.gpiomask	= 0x1800,
704 		.muxsel		= MUXSEL(2, 3, 1, 1),
705 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
706 		.gpiomute	= 0x1800,
707 		.pll            = PLL_28,
708 		.tuner_type	= TUNER_PHILIPS_SECAM,
709 		.tuner_addr	= ADDR_UNSET,
710 	},
711 
712 	/* ---- card 0x1c ---------------------------------- */
713 	[BTTV_BOARD_TERRATV] = {
714 		.name           = "Terratec TerraTV+ Version 1.1 (bt878)",
715 		.video_inputs	= 3,
716 		/* .audio_inputs= 1, */
717 		.svhs		= 2,
718 		.gpiomask	= 0x1f0fff,
719 		.muxsel		= MUXSEL(2, 3, 1, 1),
720 		.gpiomux	= { 0x20000, 0x30000, 0x10000, 0x00000 },
721 		.gpiomute	= 0x40000,
722 		.tuner_type	= TUNER_PHILIPS_PAL,
723 		.tuner_addr	= ADDR_UNSET,
724 		.audio_mode_gpio= terratv_audio,
725 		/* GPIO wiring:
726 		External 20 pin connector (for Active Radio Upgrade board)
727 		gpio00: i2c-sda
728 		gpio01: i2c-scl
729 		gpio02: om5610-data
730 		gpio03: om5610-clk
731 		gpio04: om5610-wre
732 		gpio05: om5610-stereo
733 		gpio06: rds6588-davn
734 		gpio07: Pin 7 n.c.
735 		gpio08: nIOW
736 		gpio09+10: nIOR, nSEL ?? (bt878)
737 			gpio09: nIOR (bt848)
738 			gpio10: nSEL (bt848)
739 		Sound Routing:
740 		gpio16: u2-A0 (1st 4052bt)
741 		gpio17: u2-A1
742 		gpio18: u2-nEN
743 		gpio19: u4-A0 (2nd 4052)
744 		gpio20: u4-A1
745 			u4-nEN - GND
746 		Btspy:
747 			00000 : Cdrom (internal audio input)
748 			10000 : ext. Video audio input
749 			20000 : TV Mono
750 			a0000 : TV Mono/2
751 		1a0000 : TV Stereo
752 			30000 : Radio
753 			40000 : Mute
754 	*/
755 
756 	},
757 	[BTTV_BOARD_PXC200] = {
758 		/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
759 		.name		= "Imagenation PXC200",
760 		.video_inputs	= 5,
761 		/* .audio_inputs= 1, */
762 		.svhs		= 1, /* was: 4 */
763 		.gpiomask	= 0,
764 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
765 		.gpiomux	= { 0 },
766 		.tuner_type	= TUNER_ABSENT,
767 		.tuner_addr	= ADDR_UNSET,
768 		.muxsel_hook    = PXC200_muxsel,
769 
770 	},
771 	[BTTV_BOARD_FLYVIDEO_98] = {
772 		.name		= "Lifeview FlyVideo 98 LR50",
773 		.video_inputs	= 4,
774 		/* .audio_inputs= 1, */
775 		.svhs		= 2,
776 		.gpiomask	= 0x1800,  /* 0x8dfe00 */
777 		.muxsel		= MUXSEL(2, 3, 1, 1),
778 		.gpiomux	= { 0, 0x0800, 0x1000, 0x1000 },
779 		.gpiomute	= 0x1800,
780 		.pll            = PLL_28,
781 		.tuner_type	= UNSET,
782 		.tuner_addr	= ADDR_UNSET,
783 	},
784 	[BTTV_BOARD_IPROTV] = {
785 		.name		= "Formac iProTV, Formac ProTV I (bt848)",
786 		.video_inputs	= 4,
787 		/* .audio_inputs= 1, */
788 		.svhs		= 3,
789 		.gpiomask	= 1,
790 		.muxsel		= MUXSEL(2, 3, 1, 1),
791 		.gpiomux	= { 1, 0, 0, 0 },
792 		.pll            = PLL_28,
793 		.tuner_type	= TUNER_PHILIPS_PAL,
794 		.tuner_addr	= ADDR_UNSET,
795 	},
796 
797 	/* ---- card 0x20 ---------------------------------- */
798 	[BTTV_BOARD_INTEL_C_S_PCI] = {
799 		.name		= "Intel Create and Share PCI/ Smart Video Recorder III",
800 		.video_inputs	= 4,
801 		/* .audio_inputs= 0, */
802 		.svhs		= 2,
803 		.gpiomask	= 0,
804 		.muxsel		= MUXSEL(2, 3, 1, 1),
805 		.gpiomux	= { 0 },
806 		.tuner_type	= TUNER_ABSENT,
807 		.tuner_addr	= ADDR_UNSET,
808 	},
809 	[BTTV_BOARD_TERRATVALUE] = {
810 		.name           = "Terratec TerraTValue Version Bt878",
811 		.video_inputs	= 3,
812 		/* .audio_inputs= 1, */
813 		.svhs		= 2,
814 		.gpiomask	= 0xffff00,
815 		.muxsel		= MUXSEL(2, 3, 1, 1),
816 		.gpiomux	= { 0x500, 0, 0x300, 0x900 },
817 		.gpiomute	= 0x900,
818 		.pll		= PLL_28,
819 		.tuner_type	= TUNER_PHILIPS_PAL,
820 		.tuner_addr	= ADDR_UNSET,
821 	},
822 	[BTTV_BOARD_WINFAST2000] = {
823 		.name		= "Leadtek WinFast 2000/ WinFast 2000 XP",
824 		.video_inputs	= 4,
825 		/* .audio_inputs= 1, */
826 		.svhs		= 2,
827 		/* TV, CVid, SVid, CVid over SVid connector */
828 		.muxsel		= MUXSEL(2, 3, 1, 1, 0),
829 		/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
830 		.gpiomask	= 0xb33000,
831 		.gpiomux	= { 0x122000,0x1000,0x0000,0x620000 },
832 		.gpiomute	= 0x800000,
833 		/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
834 			gpio23 -- hef4052:nEnable (0x800000)
835 			gpio12 -- hef4052:A1
836 			gpio13 -- hef4052:A0
837 		0x0000: external audio
838 		0x1000: FM
839 		0x2000: TV
840 		0x3000: n.c.
841 		Note: There exists another variant "Winfast 2000" with tv stereo !?
842 		Note: eeprom only contains FF and pci subsystem id 107d:6606
843 		*/
844 		.pll		= PLL_28,
845 		.has_radio	= 1,
846 		.tuner_type	= TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
847 		.tuner_addr	= ADDR_UNSET,
848 		.audio_mode_gpio= winfast2000_audio,
849 		.has_remote     = 1,
850 	},
851 	[BTTV_BOARD_CHRONOS_VS2] = {
852 		.name		= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
853 		.video_inputs	= 4,
854 		/* .audio_inputs= 3, */
855 		.svhs		= 2,
856 		.gpiomask	= 0x1800,
857 		.muxsel		= MUXSEL(2, 3, 1, 1),
858 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
859 		.gpiomute	= 0x1800,
860 		.pll		= PLL_28,
861 		.tuner_type	= UNSET,
862 		.tuner_addr	= ADDR_UNSET,
863 	},
864 
865 	/* ---- card 0x24 ---------------------------------- */
866 	[BTTV_BOARD_TYPHOON_TVIEW] = {
867 		.name		= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
868 		.video_inputs	= 4,
869 		/* .audio_inputs= 3, */
870 		.svhs		= 2,
871 		.gpiomask	= 0x1800,
872 		.muxsel		= MUXSEL(2, 3, 1, 1),
873 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
874 		.gpiomute	= 0x1800,
875 		.pll		= PLL_28,
876 		.tuner_type	= UNSET,
877 		.tuner_addr	= ADDR_UNSET,
878 		.has_radio	= 1,
879 	},
880 	[BTTV_BOARD_PXELVWPLTVPRO] = {
881 		.name		= "Prolink PixelView PlayTV pro",
882 		.video_inputs	= 3,
883 		/* .audio_inputs= 1, */
884 		.svhs		= 2,
885 		.gpiomask	= 0xff,
886 		.muxsel		= MUXSEL(2, 3, 1, 1),
887 		.gpiomux	= { 0x21, 0x20, 0x24, 0x2c },
888 		.gpiomute	= 0x29,
889 		.no_msp34xx	= 1,
890 		.pll		= PLL_28,
891 		.tuner_type	= UNSET,
892 		.tuner_addr	= ADDR_UNSET,
893 	},
894 	[BTTV_BOARD_MAGICTVIEW063] = {
895 		.name		= "Askey CPH06X TView99",
896 		.video_inputs	= 4,
897 		/* .audio_inputs= 1, */
898 		.svhs		= 2,
899 		.gpiomask	= 0x551e00,
900 		.muxsel		= MUXSEL(2, 3, 1, 0),
901 		.gpiomux	= { 0x551400, 0x551200, 0, 0 },
902 		.gpiomute	= 0x551c00,
903 		.pll		= PLL_28,
904 		.tuner_type	= TUNER_PHILIPS_PAL_I,
905 		.tuner_addr	= ADDR_UNSET,
906 		.has_remote     = 1,
907 	},
908 	[BTTV_BOARD_PINNACLE] = {
909 		.name		= "Pinnacle PCTV Studio/Rave",
910 		.video_inputs	= 3,
911 		/* .audio_inputs= 1, */
912 		.svhs		= 2,
913 		.gpiomask	= 0x03000F,
914 		.muxsel		= MUXSEL(2, 3, 1, 1),
915 		.gpiomux	= { 2, 0xd0001, 0, 0 },
916 		.gpiomute	= 1,
917 		.pll		= PLL_28,
918 		.tuner_type	= UNSET,
919 		.tuner_addr	= ADDR_UNSET,
920 	},
921 
922 	/* ---- card 0x28 ---------------------------------- */
923 	[BTTV_BOARD_STB2] = {
924 		.name		= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
925 		.video_inputs	= 3,
926 		/* .audio_inputs= 1, */
927 		.svhs		= 2,
928 		.gpiomask	= 7,
929 		.muxsel		= MUXSEL(2, 3, 1, 1),
930 		.gpiomux	= { 4, 0, 2, 3 },
931 		.gpiomute	= 1,
932 		.no_msp34xx	= 1,
933 		.tuner_type     = TUNER_PHILIPS_NTSC,
934 		.tuner_addr	= ADDR_UNSET,
935 		.pll            = PLL_28,
936 		.has_radio      = 1,
937 	},
938 	[BTTV_BOARD_AVPHONE98] = {
939 		.name		= "AVerMedia TVPhone 98",
940 		.video_inputs	= 3,
941 		/* .audio_inputs= 4, */
942 		.svhs		= 2,
943 		.gpiomask	= 15,
944 		.muxsel		= MUXSEL(2, 3, 1, 1),
945 		.gpiomux	= { 13, 4, 11, 7 },
946 		.pll		= PLL_28,
947 		.tuner_type	= UNSET,
948 		.tuner_addr	= ADDR_UNSET,
949 		.has_radio	= 1,
950 		.audio_mode_gpio= avermedia_tvphone_audio,
951 	},
952 	[BTTV_BOARD_PV951] = {
953 		.name		= "ProVideo PV951", /* pic16c54 */
954 		.video_inputs	= 3,
955 		/* .audio_inputs= 1, */
956 		.svhs		= 2,
957 		.gpiomask	= 0,
958 		.muxsel		= MUXSEL(2, 3, 1, 1),
959 		.gpiomux	= { 0, 0, 0, 0},
960 		.no_msp34xx	= 1,
961 		.pll		= PLL_28,
962 		.tuner_type	= TUNER_PHILIPS_PAL_I,
963 		.tuner_addr	= ADDR_UNSET,
964 	},
965 	[BTTV_BOARD_ONAIR_TV] = {
966 		.name		= "Little OnAir TV",
967 		.video_inputs	= 3,
968 		/* .audio_inputs= 1, */
969 		.svhs		= 2,
970 		.gpiomask	= 0xe00b,
971 		.muxsel		= MUXSEL(2, 3, 1, 1),
972 		.gpiomux	= { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
973 		.gpiomute	= 0xff3ffc,
974 		.no_msp34xx	= 1,
975 		.tuner_type	= UNSET,
976 		.tuner_addr	= ADDR_UNSET,
977 	},
978 
979 	/* ---- card 0x2c ---------------------------------- */
980 	[BTTV_BOARD_SIGMA_TVII_FM] = {
981 		.name		= "Sigma TVII-FM",
982 		.video_inputs	= 2,
983 		/* .audio_inputs= 1, */
984 		.svhs		= NO_SVHS,
985 		.gpiomask	= 3,
986 		.muxsel		= MUXSEL(2, 3, 1, 1),
987 		.gpiomux	= { 1, 1, 0, 2 },
988 		.gpiomute	= 3,
989 		.no_msp34xx	= 1,
990 		.pll		= PLL_NONE,
991 		.tuner_type	= UNSET,
992 		.tuner_addr	= ADDR_UNSET,
993 	},
994 	[BTTV_BOARD_MATRIX_VISION2] = {
995 		.name		= "MATRIX-Vision MV-Delta 2",
996 		.video_inputs	= 5,
997 		/* .audio_inputs= 1, */
998 		.svhs		= 3,
999 		.gpiomask	= 0,
1000 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
1001 		.gpiomux	= { 0 },
1002 		.no_msp34xx	= 1,
1003 		.pll		= PLL_28,
1004 		.tuner_type	= TUNER_ABSENT,
1005 		.tuner_addr	= ADDR_UNSET,
1006 	},
1007 	[BTTV_BOARD_ZOLTRIX_GENIE] = {
1008 		.name		= "Zoltrix Genie TV/FM",
1009 		.video_inputs	= 3,
1010 		/* .audio_inputs= 1, */
1011 		.svhs		= 2,
1012 		.gpiomask	= 0xbcf03f,
1013 		.muxsel		= MUXSEL(2, 3, 1, 1),
1014 		.gpiomux	= { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1015 		.gpiomute	= 0xbcb03f,
1016 		.no_msp34xx	= 1,
1017 		.pll		= PLL_28,
1018 		.tuner_type	= TUNER_TEMIC_4039FR5_NTSC,
1019 		.tuner_addr	= ADDR_UNSET,
1020 	},
1021 	[BTTV_BOARD_TERRATVRADIO] = {
1022 		.name		= "Terratec TV/Radio+",
1023 		.video_inputs	= 3,
1024 		/* .audio_inputs= 1, */
1025 		.svhs		= 2,
1026 		.gpiomask	= 0x70000,
1027 		.muxsel		= MUXSEL(2, 3, 1, 1),
1028 		.gpiomux	= { 0x20000, 0x30000, 0x10000, 0 },
1029 		.gpiomute	= 0x40000,
1030 		.no_msp34xx	= 1,
1031 		.pll		= PLL_35,
1032 		.tuner_type	= TUNER_PHILIPS_PAL_I,
1033 		.tuner_addr	= ADDR_UNSET,
1034 		.has_radio	= 1,
1035 	},
1036 
1037 	/* ---- card 0x30 ---------------------------------- */
1038 	[BTTV_BOARD_DYNALINK] = {
1039 		.name		= "Askey CPH03x/ Dynalink Magic TView",
1040 		.video_inputs	= 3,
1041 		/* .audio_inputs= 1, */
1042 		.svhs		= 2,
1043 		.gpiomask	= 15,
1044 		.muxsel		= MUXSEL(2, 3, 1, 1),
1045 		.gpiomux	= {2,0,0,0 },
1046 		.gpiomute	= 1,
1047 		.pll		= PLL_28,
1048 		.tuner_type	= UNSET,
1049 		.tuner_addr	= ADDR_UNSET,
1050 	},
1051 	[BTTV_BOARD_GVBCTV3PCI] = {
1052 		.name		= "IODATA GV-BCTV3/PCI",
1053 		.video_inputs	= 3,
1054 		/* .audio_inputs= 1, */
1055 		.svhs		= 2,
1056 		.gpiomask	= 0x010f00,
1057 		.muxsel		= MUXSEL(2, 3, 0, 0),
1058 		.gpiomux	= {0x10000, 0, 0x10000, 0 },
1059 		.no_msp34xx	= 1,
1060 		.pll		= PLL_28,
1061 		.tuner_type	= TUNER_ALPS_TSHC6_NTSC,
1062 		.tuner_addr	= ADDR_UNSET,
1063 		.audio_mode_gpio= gvbctv3pci_audio,
1064 	},
1065 	[BTTV_BOARD_PXELVWPLTVPAK] = {
1066 		.name		= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1067 		.video_inputs	= 5,
1068 		/* .audio_inputs= 1, */
1069 		.svhs		= 3,
1070 		.has_dig_in	= 1,
1071 		.gpiomask	= 0xAA0000,
1072 		.muxsel		= MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1073 		/* .digital_mode= DIGITAL_MODE_CAMERA, */
1074 		.gpiomux	= { 0x20000, 0, 0x80000, 0x80000 },
1075 		.gpiomute	= 0xa8000,
1076 		.no_msp34xx	= 1,
1077 		.pll		= PLL_28,
1078 		.tuner_type	= TUNER_PHILIPS_PAL_I,
1079 		.tuner_addr	= ADDR_UNSET,
1080 		.has_remote	= 1,
1081 		/* GPIO wiring: (different from Rev.4C !)
1082 			GPIO17: U4.A0 (first hef4052bt)
1083 			GPIO19: U4.A1
1084 			GPIO20: U5.A1 (second hef4052bt)
1085 			GPIO21: U4.nEN
1086 			GPIO22: BT832 Reset Line
1087 			GPIO23: A5,A0, U5,nEN
1088 		Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1089 		*/
1090 	},
1091 	[BTTV_BOARD_EAGLE] = {
1092 		.name           = "Eagle Wireless Capricorn2 (bt878A)",
1093 		.video_inputs   = 4,
1094 		/* .audio_inputs= 1, */
1095 		.svhs           = 2,
1096 		.gpiomask       = 7,
1097 		.muxsel         = MUXSEL(2, 0, 1, 1),
1098 		.gpiomux        = { 0, 1, 2, 3 },
1099 		.gpiomute	= 4,
1100 		.pll            = PLL_28,
1101 		.tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1102 		.tuner_addr	= ADDR_UNSET,
1103 	},
1104 
1105 	/* ---- card 0x34 ---------------------------------- */
1106 	[BTTV_BOARD_PINNACLEPRO] = {
1107 		/* David Härdeman <david@2gen.com> */
1108 		.name           = "Pinnacle PCTV Studio Pro",
1109 		.video_inputs   = 4,
1110 		/* .audio_inputs= 1, */
1111 		.svhs           = 3,
1112 		.gpiomask       = 0x03000F,
1113 		.muxsel		= MUXSEL(2, 3, 1, 1),
1114 		.gpiomux	= { 1, 0xd0001, 0, 0 },
1115 		.gpiomute	= 10,
1116 				/* sound path (5 sources):
1117 				MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1118 					0= ext. Audio IN
1119 					1= from MUX2
1120 					2= Mono TV sound from Tuner
1121 					3= not connected
1122 				MUX2 (mask 0x30000):
1123 					0,2,3= from MSP34xx
1124 					1= FM stereo Radio from Tuner */
1125 		.pll            = PLL_28,
1126 		.tuner_type     = UNSET,
1127 		.tuner_addr	= ADDR_UNSET,
1128 	},
1129 	[BTTV_BOARD_TVIEW_RDS_FM] = {
1130 		/* Claas Langbehn <claas@bigfoot.com>,
1131 		Sven Grothklags <sven@upb.de> */
1132 		.name		= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1133 		.video_inputs	= 4,
1134 		/* .audio_inputs= 3, */
1135 		.svhs		= 2,
1136 		.gpiomask	= 0x1c,
1137 		.muxsel		= MUXSEL(2, 3, 1, 1),
1138 		.gpiomux	= { 0, 0, 0x10, 8 },
1139 		.gpiomute	= 4,
1140 		.pll		= PLL_28,
1141 		.tuner_type	= TUNER_PHILIPS_PAL,
1142 		.tuner_addr	= ADDR_UNSET,
1143 		.has_radio	= 1,
1144 	},
1145 	[BTTV_BOARD_LIFETEC_9415] = {
1146 		/* Tim Röstermundt <rosterm@uni-muenster.de>
1147 		in de.comp.os.unix.linux.hardware:
1148 			options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1149 			gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1150 			options tuner type=5 */
1151 		.name		= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1152 		.video_inputs	= 4,
1153 		/* .audio_inputs= 1, */
1154 		.svhs		= 2,
1155 		.gpiomask	= 0x18e0,
1156 		.muxsel		= MUXSEL(2, 3, 1, 1),
1157 		.gpiomux	= { 0x0000,0x0800,0x1000,0x1000 },
1158 		.gpiomute	= 0x18e0,
1159 			/* For cards with tda9820/tda9821:
1160 				0x0000: Tuner normal stereo
1161 				0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1162 				0x0880: Tuner A2 stereo */
1163 		.pll		= PLL_28,
1164 		.tuner_type	= UNSET,
1165 		.tuner_addr	= ADDR_UNSET,
1166 	},
1167 	[BTTV_BOARD_BESTBUY_EASYTV] = {
1168 		/* Miguel Angel Alvarez <maacruz@navegalia.com>
1169 		old Easy TV BT848 version (model CPH031) */
1170 		.name           = "Askey CPH031/ BESTBUY Easy TV",
1171 		.video_inputs	= 4,
1172 		/* .audio_inputs= 1, */
1173 		.svhs           = 2,
1174 		.gpiomask       = 0xF,
1175 		.muxsel         = MUXSEL(2, 3, 1, 0),
1176 		.gpiomux        = { 2, 0, 0, 0 },
1177 		.gpiomute	= 10,
1178 		.pll		= PLL_28,
1179 		.tuner_type	= TUNER_TEMIC_PAL,
1180 		.tuner_addr	= ADDR_UNSET,
1181 	},
1182 
1183 	/* ---- card 0x38 ---------------------------------- */
1184 	[BTTV_BOARD_FLYVIDEO_98FM] = {
1185 		/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1186 		.name           = "Lifeview FlyVideo 98FM LR50",
1187 		.video_inputs   = 4,
1188 		/* .audio_inputs= 3, */
1189 		.svhs           = 2,
1190 		.gpiomask       = 0x1800,
1191 		.muxsel         = MUXSEL(2, 3, 1, 1),
1192 		.gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1193 		.gpiomute	= 0x1800,
1194 		.pll            = PLL_28,
1195 		.tuner_type     = TUNER_PHILIPS_PAL,
1196 		.tuner_addr	= ADDR_UNSET,
1197 	},
1198 		/* This is the ultimate cheapo capture card
1199 		* just a BT848A on a small PCB!
1200 		* Steve Hosgood <steve@equiinet.com> */
1201 	[BTTV_BOARD_GRANDTEC] = {
1202 		.name           = "GrandTec 'Grand Video Capture' (Bt848)",
1203 		.video_inputs   = 2,
1204 		/* .audio_inputs= 0, */
1205 		.svhs           = 1,
1206 		.gpiomask       = 0,
1207 		.muxsel         = MUXSEL(3, 1),
1208 		.gpiomux        = { 0 },
1209 		.no_msp34xx     = 1,
1210 		.pll            = PLL_35,
1211 		.tuner_type     = TUNER_ABSENT,
1212 		.tuner_addr	= ADDR_UNSET,
1213 	},
1214 	[BTTV_BOARD_ASKEY_CPH060] = {
1215 		/* Daniel Herrington <daniel.herrington@home.com> */
1216 		.name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1217 		.video_inputs   = 3,
1218 		/* .audio_inputs= 1, */
1219 		.svhs           = 2,
1220 		.gpiomask       = 0xe00,
1221 		.muxsel         = MUXSEL(2, 3, 1, 1),
1222 		.gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1223 		.gpiomute	= 0x800,
1224 		.pll            = PLL_28,
1225 		.tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1226 		.tuner_addr	= ADDR_UNSET,
1227 	},
1228 	[BTTV_BOARD_ASKEY_CPH03X] = {
1229 		/* Matti Mottus <mottus@physic.ut.ee> */
1230 		.name		= "Askey CPH03x TV Capturer",
1231 		.video_inputs	= 4,
1232 		/* .audio_inputs= 1, */
1233 		.svhs		= 2,
1234 		.gpiomask       = 0x03000F,
1235 		.muxsel		= MUXSEL(2, 3, 1, 0),
1236 		.gpiomux        = { 2, 0, 0, 0 },
1237 		.gpiomute	= 1,
1238 		.pll            = PLL_28,
1239 		.tuner_type	= TUNER_TEMIC_PAL,
1240 		.tuner_addr	= ADDR_UNSET,
1241 		.has_remote	= 1,
1242 	},
1243 
1244 	/* ---- card 0x3c ---------------------------------- */
1245 	[BTTV_BOARD_MM100PCTV] = {
1246 		/* Philip Blundell <philb@gnu.org> */
1247 		.name           = "Modular Technology MM100PCTV",
1248 		.video_inputs   = 2,
1249 		/* .audio_inputs= 2, */
1250 		.svhs		= NO_SVHS,
1251 		.gpiomask       = 11,
1252 		.muxsel         = MUXSEL(2, 3, 1, 1),
1253 		.gpiomux        = { 2, 0, 0, 1 },
1254 		.gpiomute	= 8,
1255 		.pll            = PLL_35,
1256 		.tuner_type     = TUNER_TEMIC_PAL,
1257 		.tuner_addr	= ADDR_UNSET,
1258 	},
1259 	[BTTV_BOARD_GMV1] = {
1260 		/* Adrian Cox <adrian@humboldt.co.uk */
1261 		.name		= "AG Electronics GMV1",
1262 		.video_inputs   = 2,
1263 		/* .audio_inputs= 0, */
1264 		.svhs		= 1,
1265 		.gpiomask       = 0xF,
1266 		.muxsel		= MUXSEL(2, 2),
1267 		.gpiomux        = { },
1268 		.no_msp34xx     = 1,
1269 		.pll		= PLL_28,
1270 		.tuner_type     = TUNER_ABSENT,
1271 		.tuner_addr	= ADDR_UNSET,
1272 	},
1273 	[BTTV_BOARD_BESTBUY_EASYTV2] = {
1274 		/* Miguel Angel Alvarez <maacruz@navegalia.com>
1275 		new Easy TV BT878 version (model CPH061)
1276 		special thanks to Informatica Mieres for providing the card */
1277 		.name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1278 		.video_inputs	= 3,
1279 		/* .audio_inputs= 2, */
1280 		.svhs           = 2,
1281 		.gpiomask       = 0xFF,
1282 		.muxsel         = MUXSEL(2, 3, 1, 0),
1283 		.gpiomux        = { 1, 0, 4, 4 },
1284 		.gpiomute	= 9,
1285 		.pll		= PLL_28,
1286 		.tuner_type	= TUNER_PHILIPS_PAL,
1287 		.tuner_addr	= ADDR_UNSET,
1288 	},
1289 	[BTTV_BOARD_ATI_TVWONDER] = {
1290 		/* Lukas Gebauer <geby@volny.cz> */
1291 		.name		= "ATI TV-Wonder",
1292 		.video_inputs	= 3,
1293 		/* .audio_inputs= 1, */
1294 		.svhs		= 2,
1295 		.gpiomask	= 0xf03f,
1296 		.muxsel		= MUXSEL(2, 3, 1, 0),
1297 		.gpiomux	= { 0xbffe, 0, 0xbfff, 0 },
1298 		.gpiomute	= 0xbffe,
1299 		.pll		= PLL_28,
1300 		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
1301 		.tuner_addr	= ADDR_UNSET,
1302 	},
1303 
1304 	/* ---- card 0x40 ---------------------------------- */
1305 	[BTTV_BOARD_ATI_TVWONDERVE] = {
1306 		/* Lukas Gebauer <geby@volny.cz> */
1307 		.name		= "ATI TV-Wonder VE",
1308 		.video_inputs	= 2,
1309 		/* .audio_inputs= 1, */
1310 		.svhs		= NO_SVHS,
1311 		.gpiomask	= 1,
1312 		.muxsel		= MUXSEL(2, 3, 0, 1),
1313 		.gpiomux	= { 0, 0, 1, 0 },
1314 		.no_msp34xx	= 1,
1315 		.pll		= PLL_28,
1316 		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
1317 		.tuner_addr	= ADDR_UNSET,
1318 	},
1319 	[BTTV_BOARD_FLYVIDEO2000] = {
1320 		/* DeeJay <deejay@westel900.net (2000S) */
1321 		.name           = "Lifeview FlyVideo 2000S LR90",
1322 		.video_inputs   = 3,
1323 		/* .audio_inputs= 3, */
1324 		.svhs           = 2,
1325 		.gpiomask	= 0x18e0,
1326 		.muxsel		= MUXSEL(2, 3, 0, 1),
1327 				/* Radio changed from 1e80 to 0x800 to make
1328 				FlyVideo2000S in .hu happy (gm)*/
1329 				/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1330 		.gpiomux	= { 0x0000,0x0800,0x1000,0x1000 },
1331 		.gpiomute	= 0x1800,
1332 		.audio_mode_gpio= fv2000s_audio,
1333 		.no_msp34xx	= 1,
1334 		.pll            = PLL_28,
1335 		.tuner_type     = TUNER_PHILIPS_PAL,
1336 		.tuner_addr	= ADDR_UNSET,
1337 	},
1338 	[BTTV_BOARD_TERRATVALUER] = {
1339 		.name		= "Terratec TValueRadio",
1340 		.video_inputs	= 3,
1341 		/* .audio_inputs= 1, */
1342 		.svhs		= 2,
1343 		.gpiomask	= 0xffff00,
1344 		.muxsel		= MUXSEL(2, 3, 1, 1),
1345 		.gpiomux	= { 0x500, 0x500, 0x300, 0x900 },
1346 		.gpiomute	= 0x900,
1347 		.pll		= PLL_28,
1348 		.tuner_type	= TUNER_PHILIPS_PAL,
1349 		.tuner_addr	= ADDR_UNSET,
1350 		.has_radio	= 1,
1351 	},
1352 	[BTTV_BOARD_GVBCTV4PCI] = {
1353 		/* TANAKA Kei <peg00625@nifty.com> */
1354 		.name           = "IODATA GV-BCTV4/PCI",
1355 		.video_inputs   = 3,
1356 		/* .audio_inputs= 1, */
1357 		.svhs           = 2,
1358 		.gpiomask       = 0x010f00,
1359 		.muxsel         = MUXSEL(2, 3, 0, 0),
1360 		.gpiomux        = {0x10000, 0, 0x10000, 0 },
1361 		.no_msp34xx     = 1,
1362 		.pll            = PLL_28,
1363 		.tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1364 		.tuner_addr	= ADDR_UNSET,
1365 		.audio_mode_gpio= gvbctv3pci_audio,
1366 	},
1367 
1368 	/* ---- card 0x44 ---------------------------------- */
1369 	[BTTV_BOARD_VOODOOTV_FM] = {
1370 		.name           = "3Dfx VoodooTV FM (Euro)",
1371 		/* try "insmod msp3400 simple=0" if you have
1372 		* sound problems with this card. */
1373 		.video_inputs   = 4,
1374 		/* .audio_inputs= 1, */
1375 		.svhs           = NO_SVHS,
1376 		.gpiomask       = 0x4f8a00,
1377 		/* 0x100000: 1=MSP enabled (0=disable again)
1378 		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1379 		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1380 		.gpiomute	= 0x947fff,
1381 		/* tvtuner, radio,   external,internal, mute,  stereo
1382 		* tuner, Composite, SVid, Composite-on-Svid-adapter */
1383 		.muxsel         = MUXSEL(2, 3, 0, 1),
1384 		.tuner_type     = TUNER_MT2032,
1385 		.tuner_addr	= ADDR_UNSET,
1386 		.pll		= PLL_28,
1387 		.has_radio	= 1,
1388 	},
1389 	[BTTV_BOARD_VOODOOTV_200] = {
1390 		.name           = "VoodooTV 200 (USA)",
1391 		/* try "insmod msp3400 simple=0" if you have
1392 		* sound problems with this card. */
1393 		.video_inputs   = 4,
1394 		/* .audio_inputs= 1, */
1395 		.svhs           = NO_SVHS,
1396 		.gpiomask       = 0x4f8a00,
1397 		/* 0x100000: 1=MSP enabled (0=disable again)
1398 		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1399 		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1400 		.gpiomute	= 0x947fff,
1401 		/* tvtuner, radio,   external,internal, mute,  stereo
1402 		* tuner, Composite, SVid, Composite-on-Svid-adapter */
1403 		.muxsel         = MUXSEL(2, 3, 0, 1),
1404 		.tuner_type     = TUNER_MT2032,
1405 		.tuner_addr	= ADDR_UNSET,
1406 		.pll		= PLL_28,
1407 		.has_radio	= 1,
1408 	},
1409 	[BTTV_BOARD_AIMMS] = {
1410 		/* Philip Blundell <pb@nexus.co.uk> */
1411 		.name           = "Active Imaging AIMMS",
1412 		.video_inputs   = 1,
1413 		/* .audio_inputs= 0, */
1414 		.tuner_type     = TUNER_ABSENT,
1415 		.tuner_addr	= ADDR_UNSET,
1416 		.pll            = PLL_28,
1417 		.muxsel         = MUXSEL(2),
1418 		.gpiomask       = 0
1419 	},
1420 	[BTTV_BOARD_PV_BT878P_PLUS] = {
1421 		/* Tomasz Pyra <hellfire@sedez.iq.pl> */
1422 		.name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1423 		.video_inputs   = 3,
1424 		/* .audio_inputs= 4, */
1425 		.svhs           = 2,
1426 		.gpiomask       = 15,
1427 		.muxsel         = MUXSEL(2, 3, 1, 1),
1428 		.gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1429 		.gpiomute	= 13,
1430 		.pll            = PLL_28,
1431 		.tuner_type     = TUNER_LG_PAL_I_FM,
1432 		.tuner_addr	= ADDR_UNSET,
1433 		.has_remote     = 1,
1434 		/* GPIO wiring:
1435 			GPIO0: U4.A0 (hef4052bt)
1436 			GPIO1: U4.A1
1437 			GPIO2: U4.A1 (second hef4052bt)
1438 			GPIO3: U4.nEN, U5.A0, A5.nEN
1439 			GPIO8-15: vrd866b ?
1440 		*/
1441 	},
1442 	[BTTV_BOARD_FLYVIDEO98EZ] = {
1443 		.name		= "Lifeview FlyVideo 98EZ (capture only) LR51",
1444 		.video_inputs	= 4,
1445 		/* .audio_inputs= 0, */
1446 		.svhs		= 2,
1447 		/* AV1, AV2, SVHS, CVid adapter on SVHS */
1448 		.muxsel		= MUXSEL(2, 3, 1, 1),
1449 		.pll		= PLL_28,
1450 		.no_msp34xx	= 1,
1451 		.tuner_type	= TUNER_ABSENT,
1452 		.tuner_addr	= ADDR_UNSET,
1453 	},
1454 
1455 	/* ---- card 0x48 ---------------------------------- */
1456 	[BTTV_BOARD_PV_BT878P_9B] = {
1457 		/* Dariusz Kowalewski <darekk@automex.pl> */
1458 		.name		= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1459 		.video_inputs	= 4,
1460 		/* .audio_inputs= 1, */
1461 		.svhs		= 2,
1462 		.gpiomask	= 0x3f,
1463 		.muxsel		= MUXSEL(2, 3, 1, 1),
1464 		.gpiomux	= { 0x01, 0x00, 0x03, 0x03 },
1465 		.gpiomute	= 0x09,
1466 		.no_msp34xx	= 1,
1467 		.pll		= PLL_28,
1468 		.tuner_type	= TUNER_PHILIPS_PAL,
1469 		.tuner_addr	= ADDR_UNSET,
1470 		.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1471 		.has_radio	= 1,  /* Note: not all cards have radio */
1472 		.has_remote     = 1,
1473 		/* GPIO wiring:
1474 			GPIO0: A0 hef4052
1475 			GPIO1: A1 hef4052
1476 			GPIO3: nEN hef4052
1477 			GPIO8-15: vrd866b
1478 			GPIO20,22,23: R30,R29,R28
1479 		*/
1480 	},
1481 	[BTTV_BOARD_SENSORAY311_611] = {
1482 		/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1483 		/* you must jumper JP5 for the 311 card (PC/104+) to work */
1484 		.name           = "Sensoray 311/611",
1485 		.video_inputs   = 5,
1486 		/* .audio_inputs= 0, */
1487 		.svhs           = 4,
1488 		.gpiomask       = 0,
1489 		.muxsel         = MUXSEL(2, 3, 1, 0, 0),
1490 		.gpiomux        = { 0 },
1491 		.tuner_type     = TUNER_ABSENT,
1492 		.tuner_addr	= ADDR_UNSET,
1493 	},
1494 	[BTTV_BOARD_RV605] = {
1495 		/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1496 		.name           = "RemoteVision MX (RV605)",
1497 		.video_inputs   = 16,
1498 		/* .audio_inputs= 0, */
1499 		.svhs           = NO_SVHS,
1500 		.gpiomask       = 0x00,
1501 		.gpiomask2      = 0x07ff,
1502 		.muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1503 		.no_msp34xx     = 1,
1504 		.tuner_type     = TUNER_ABSENT,
1505 		.tuner_addr	= ADDR_UNSET,
1506 		.muxsel_hook    = rv605_muxsel,
1507 	},
1508 	[BTTV_BOARD_POWERCLR_MTV878] = {
1509 		.name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1510 		.video_inputs   = 3,
1511 		/* .audio_inputs= 2, */
1512 		.svhs           = 2,
1513 		.gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1514 		.muxsel         = MUXSEL(2, 1, 1),
1515 		.gpiomux        = { 0, 1, 2, 2 },
1516 		.gpiomute	= 4,
1517 		.tuner_type     = TUNER_PHILIPS_PAL,
1518 		.tuner_addr	= ADDR_UNSET,
1519 		.pll		= PLL_28,
1520 		.has_radio	= 1,
1521 	},
1522 
1523 	/* ---- card 0x4c ---------------------------------- */
1524 	[BTTV_BOARD_WINDVR] = {
1525 		/* Masaki Suzuki <masaki@btree.org> */
1526 		.name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1527 		.video_inputs   = 3,
1528 		/* .audio_inputs= 1, */
1529 		.svhs           = 2,
1530 		.gpiomask       = 0x140007,
1531 		.muxsel         = MUXSEL(2, 3, 1, 1),
1532 		.gpiomux        = { 0, 1, 2, 3 },
1533 		.gpiomute	= 4,
1534 		.tuner_type     = TUNER_PHILIPS_NTSC,
1535 		.tuner_addr	= ADDR_UNSET,
1536 		.audio_mode_gpio= windvr_audio,
1537 	},
1538 	[BTTV_BOARD_GRANDTEC_MULTI] = {
1539 		.name           = "GrandTec Multi Capture Card (Bt878)",
1540 		.video_inputs   = 4,
1541 		/* .audio_inputs= 0, */
1542 		.svhs           = NO_SVHS,
1543 		.gpiomask       = 0,
1544 		.muxsel         = MUXSEL(2, 3, 1, 0),
1545 		.gpiomux        = { 0 },
1546 		.no_msp34xx     = 1,
1547 		.pll            = PLL_28,
1548 		.tuner_type     = TUNER_ABSENT,
1549 		.tuner_addr	= ADDR_UNSET,
1550 	},
1551 	[BTTV_BOARD_KWORLD] = {
1552 		.name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1553 		.video_inputs   = 4,
1554 		/* .audio_inputs= 3, */
1555 		.svhs           = 2,
1556 		.gpiomask       = 7,
1557 		/* Tuner, SVid, SVHS, SVid to SVHS connector */
1558 		.muxsel         = MUXSEL(2, 3, 1, 1),
1559 		.gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1560 						* This card lacks external Audio In, so we mute it on Ext. & Int.
1561 						* The PCB can take a sbx1637/sbx1673, wiring unknown.
1562 						* This card lacks PCI subsystem ID, sigh.
1563 						* gpiomux =1: lower volume, 2+3: mute
1564 						* btwincap uses 0x80000/0x80003
1565 						*/
1566 		.gpiomute	= 4,
1567 		.no_msp34xx     = 1,
1568 		.pll            = PLL_28,
1569 		.tuner_type     = TUNER_PHILIPS_PAL,
1570 		.tuner_addr	= ADDR_UNSET,
1571 		/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1572 		radio signal strength indicators work fine. */
1573 		.has_radio	= 1,
1574 		/* GPIO Info:
1575 			GPIO0,1:   HEF4052 A0,A1
1576 			GPIO2:     HEF4052 nENABLE
1577 			GPIO3-7:   n.c.
1578 			GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1579 			GPIO14,15: ??
1580 			GPIO16-21: n.c.
1581 			GPIO22,23: ??
1582 			??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1583 	},
1584 	[BTTV_BOARD_DSP_TCVIDEO] = {
1585 		/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1586 		.name           = "DSP Design TCVIDEO",
1587 		.video_inputs   = 4,
1588 		.svhs           = NO_SVHS,
1589 		.muxsel         = MUXSEL(2, 3, 1, 0),
1590 		.pll            = PLL_28,
1591 		.tuner_type     = UNSET,
1592 		.tuner_addr	= ADDR_UNSET,
1593 	},
1594 
1595 		/* ---- card 0x50 ---------------------------------- */
1596 	[BTTV_BOARD_HAUPPAUGEPVR] = {
1597 		.name           = "Hauppauge WinTV PVR",
1598 		.video_inputs   = 4,
1599 		/* .audio_inputs= 1, */
1600 		.svhs           = 2,
1601 		.muxsel         = MUXSEL(2, 0, 1, 1),
1602 		.pll            = PLL_28,
1603 		.tuner_type     = UNSET,
1604 		.tuner_addr	= ADDR_UNSET,
1605 
1606 		.gpiomask       = 7,
1607 		.gpiomux        = {7},
1608 	},
1609 	[BTTV_BOARD_GVBCTV5PCI] = {
1610 		.name           = "IODATA GV-BCTV5/PCI",
1611 		.video_inputs   = 3,
1612 		/* .audio_inputs= 1, */
1613 		.svhs           = 2,
1614 		.gpiomask       = 0x0f0f80,
1615 		.muxsel         = MUXSEL(2, 3, 1, 0),
1616 		.gpiomux        = {0x030000, 0x010000, 0, 0 },
1617 		.gpiomute	= 0x020000,
1618 		.no_msp34xx     = 1,
1619 		.pll            = PLL_28,
1620 		.tuner_type     = TUNER_PHILIPS_NTSC_M,
1621 		.tuner_addr	= ADDR_UNSET,
1622 		.audio_mode_gpio= gvbctv5pci_audio,
1623 		.has_radio      = 1,
1624 	},
1625 	[BTTV_BOARD_OSPREY1x0] = {
1626 		.name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1627 		.video_inputs   = 4,                  /* id-inputs-clock */
1628 		/* .audio_inputs= 0, */
1629 		.svhs           = 3,
1630 		.muxsel         = MUXSEL(3, 2, 0, 1),
1631 		.pll            = PLL_28,
1632 		.tuner_type     = TUNER_ABSENT,
1633 		.tuner_addr	= ADDR_UNSET,
1634 		.no_msp34xx     = 1,
1635 		.no_tda7432     = 1,
1636 	},
1637 	[BTTV_BOARD_OSPREY1x0_848] = {
1638 		.name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1639 		.video_inputs   = 3,
1640 		/* .audio_inputs= 0, */
1641 		.svhs           = 2,
1642 		.muxsel         = MUXSEL(2, 3, 1),
1643 		.pll            = PLL_28,
1644 		.tuner_type     = TUNER_ABSENT,
1645 		.tuner_addr	= ADDR_UNSET,
1646 		.no_msp34xx     = 1,
1647 		.no_tda7432     = 1,
1648 	},
1649 
1650 		/* ---- card 0x54 ---------------------------------- */
1651 	[BTTV_BOARD_OSPREY101_848] = {
1652 		.name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1653 		.video_inputs   = 2,
1654 		/* .audio_inputs= 0, */
1655 		.svhs           = 1,
1656 		.muxsel         = MUXSEL(3, 1),
1657 		.pll            = PLL_28,
1658 		.tuner_type     = TUNER_ABSENT,
1659 		.tuner_addr	= ADDR_UNSET,
1660 		.no_msp34xx     = 1,
1661 		.no_tda7432     = 1,
1662 	},
1663 	[BTTV_BOARD_OSPREY1x1] = {
1664 		.name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1665 		.video_inputs   = 1,
1666 		/* .audio_inputs= 0, */
1667 		.svhs           = NO_SVHS,
1668 		.muxsel         = MUXSEL(0),
1669 		.pll            = PLL_28,
1670 		.tuner_type     = TUNER_ABSENT,
1671 		.tuner_addr	= ADDR_UNSET,
1672 		.no_msp34xx     = 1,
1673 		.no_tda7432     = 1,
1674 	},
1675 	[BTTV_BOARD_OSPREY1x1_SVID] = {
1676 		.name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1677 		.video_inputs   = 2,
1678 		/* .audio_inputs= 0, */
1679 		.svhs           = 1,
1680 		.muxsel         = MUXSEL(0, 1),
1681 		.pll            = PLL_28,
1682 		.tuner_type     = TUNER_ABSENT,
1683 		.tuner_addr	= ADDR_UNSET,
1684 		.no_msp34xx     = 1,
1685 		.no_tda7432     = 1,
1686 	},
1687 	[BTTV_BOARD_OSPREY2xx] = {
1688 		.name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1689 		.video_inputs   = 1,
1690 		/* .audio_inputs= 1, */
1691 		.svhs           = NO_SVHS,
1692 		.muxsel         = MUXSEL(0),
1693 		.pll            = PLL_28,
1694 		.tuner_type	= TUNER_ABSENT,
1695 		.tuner_addr	= ADDR_UNSET,
1696 		.no_msp34xx     = 1,
1697 		.no_tda7432     = 1,
1698 	},
1699 
1700 		/* ---- card 0x58 ---------------------------------- */
1701 	[BTTV_BOARD_OSPREY2x0_SVID] = {
1702 		.name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1703 		.video_inputs   = 2,
1704 		/* .audio_inputs= 1, */
1705 		.svhs           = 1,
1706 		.muxsel         = MUXSEL(0, 1),
1707 		.pll            = PLL_28,
1708 		.tuner_type	= TUNER_ABSENT,
1709 		.tuner_addr	= ADDR_UNSET,
1710 		.no_msp34xx     = 1,
1711 		.no_tda7432     = 1,
1712 	},
1713 	[BTTV_BOARD_OSPREY2x0] = {
1714 		.name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1715 		.video_inputs   = 2,
1716 		/* .audio_inputs= 1, */
1717 		.svhs           = 1,
1718 		.muxsel         = MUXSEL(2, 3),
1719 		.pll            = PLL_28,
1720 		.tuner_type	= TUNER_ABSENT,
1721 		.tuner_addr	= ADDR_UNSET,
1722 		.no_msp34xx     = 1,
1723 		.no_tda7432     = 1,
1724 	},
1725 	[BTTV_BOARD_OSPREY500] = {
1726 		.name           = "Osprey 500",   /* 500 */
1727 		.video_inputs   = 2,
1728 		/* .audio_inputs= 1, */
1729 		.svhs           = 1,
1730 		.muxsel         = MUXSEL(2, 3),
1731 		.pll            = PLL_28,
1732 		.tuner_type     = TUNER_ABSENT,
1733 		.tuner_addr	= ADDR_UNSET,
1734 		.no_msp34xx     = 1,
1735 		.no_tda7432     = 1,
1736 	},
1737 	[BTTV_BOARD_OSPREY540] = {
1738 		.name           = "Osprey 540",   /* 540 */
1739 		.video_inputs   = 4,
1740 		/* .audio_inputs= 1, */
1741 		.pll            = PLL_28,
1742 		.tuner_type     = TUNER_ABSENT,
1743 		.tuner_addr	= ADDR_UNSET,
1744 		.no_msp34xx     = 1,
1745 		.no_tda7432     = 1,
1746 	},
1747 
1748 		/* ---- card 0x5C ---------------------------------- */
1749 	[BTTV_BOARD_OSPREY2000] = {
1750 		.name           = "Osprey 2000",  /* 2000 */
1751 		.video_inputs   = 2,
1752 		/* .audio_inputs= 1, */
1753 		.svhs           = 1,
1754 		.muxsel         = MUXSEL(2, 3),
1755 		.pll            = PLL_28,
1756 		.tuner_type	= TUNER_ABSENT,
1757 		.tuner_addr	= ADDR_UNSET,
1758 		.no_msp34xx     = 1,
1759 		.no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1760 	},
1761 	[BTTV_BOARD_IDS_EAGLE] = {
1762 		/* M G Berberich <berberic@forwiss.uni-passau.de> */
1763 		.name           = "IDS Eagle",
1764 		.video_inputs   = 4,
1765 		/* .audio_inputs= 0, */
1766 		.tuner_type     = TUNER_ABSENT,
1767 		.tuner_addr	= ADDR_UNSET,
1768 		.svhs           = NO_SVHS,
1769 		.gpiomask       = 0,
1770 		.muxsel         = MUXSEL(2, 2, 2, 2),
1771 		.muxsel_hook    = eagle_muxsel,
1772 		.no_msp34xx     = 1,
1773 		.pll            = PLL_28,
1774 	},
1775 	[BTTV_BOARD_PINNACLESAT] = {
1776 		.name           = "Pinnacle PCTV Sat",
1777 		.video_inputs   = 2,
1778 		/* .audio_inputs= 0, */
1779 		.svhs           = 1,
1780 		.tuner_type     = TUNER_ABSENT,
1781 		.tuner_addr	= ADDR_UNSET,
1782 		.no_msp34xx     = 1,
1783 		.no_tda7432     = 1,
1784 		.muxsel         = MUXSEL(3, 1),
1785 		.pll            = PLL_28,
1786 		.no_gpioirq     = 1,
1787 		.has_dvb        = 1,
1788 	},
1789 	[BTTV_BOARD_FORMAC_PROTV] = {
1790 		.name           = "Formac ProTV II (bt878)",
1791 		.video_inputs   = 4,
1792 		/* .audio_inputs= 1, */
1793 		.svhs           = 3,
1794 		.gpiomask       = 2,
1795 		/* TV, Comp1, Composite over SVID con, SVID */
1796 		.muxsel         = MUXSEL(2, 3, 1, 1),
1797 		.gpiomux        = { 2, 2, 0, 0 },
1798 		.pll            = PLL_28,
1799 		.has_radio      = 1,
1800 		.tuner_type     = TUNER_PHILIPS_PAL,
1801 		.tuner_addr	= ADDR_UNSET,
1802 	/* sound routing:
1803 		GPIO=0x00,0x01,0x03: mute (?)
1804 		0x02: both TV and radio (tuner: FM1216/I)
1805 		The card has onboard audio connectors labeled "cdrom" and "board",
1806 		not soldered here, though unknown wiring.
1807 		Card lacks: external audio in, pci subsystem id.
1808 	*/
1809 	},
1810 
1811 		/* ---- card 0x60 ---------------------------------- */
1812 	[BTTV_BOARD_MACHTV] = {
1813 		.name           = "MachTV",
1814 		.video_inputs   = 3,
1815 		/* .audio_inputs= 1, */
1816 		.svhs           = NO_SVHS,
1817 		.gpiomask       = 7,
1818 		.muxsel         = MUXSEL(2, 3, 1, 1),
1819 		.gpiomux        = { 0, 1, 2, 3},
1820 		.gpiomute	= 4,
1821 		.tuner_type     = TUNER_PHILIPS_PAL,
1822 		.tuner_addr	= ADDR_UNSET,
1823 		.pll            = PLL_28,
1824 	},
1825 	[BTTV_BOARD_EURESYS_PICOLO] = {
1826 		.name           = "Euresys Picolo",
1827 		.video_inputs   = 3,
1828 		/* .audio_inputs= 0, */
1829 		.svhs           = 2,
1830 		.gpiomask       = 0,
1831 		.no_msp34xx     = 1,
1832 		.no_tda7432     = 1,
1833 		.muxsel         = MUXSEL(2, 0, 1),
1834 		.pll            = PLL_28,
1835 		.tuner_type     = TUNER_ABSENT,
1836 		.tuner_addr	= ADDR_UNSET,
1837 	},
1838 	[BTTV_BOARD_PV150] = {
1839 		/* Luc Van Hoeylandt <luc@e-magic.be> */
1840 		.name           = "ProVideo PV150", /* 0x4f */
1841 		.video_inputs   = 2,
1842 		/* .audio_inputs= 0, */
1843 		.svhs           = NO_SVHS,
1844 		.gpiomask       = 0,
1845 		.muxsel         = MUXSEL(2, 3),
1846 		.gpiomux        = { 0 },
1847 		.no_msp34xx     = 1,
1848 		.pll            = PLL_28,
1849 		.tuner_type     = TUNER_ABSENT,
1850 		.tuner_addr	= ADDR_UNSET,
1851 	},
1852 	[BTTV_BOARD_AD_TVK503] = {
1853 		/* Hiroshi Takekawa <sian@big.or.jp> */
1854 		/* This card lacks subsystem ID */
1855 		.name           = "AD-TVK503", /* 0x63 */
1856 		.video_inputs   = 4,
1857 		/* .audio_inputs= 1, */
1858 		.svhs           = 2,
1859 		.gpiomask       = 0x001e8007,
1860 		.muxsel         = MUXSEL(2, 3, 1, 0),
1861 		/*                  Tuner, Radio, external, internal, off,  on */
1862 		.gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1863 		.gpiomute	= 0x0f,
1864 		.no_msp34xx     = 1,
1865 		.pll            = PLL_28,
1866 		.tuner_type     = TUNER_PHILIPS_NTSC,
1867 		.tuner_addr	= ADDR_UNSET,
1868 		.audio_mode_gpio= adtvk503_audio,
1869 	},
1870 
1871 		/* ---- card 0x64 ---------------------------------- */
1872 	[BTTV_BOARD_HERCULES_SM_TV] = {
1873 		.name           = "Hercules Smart TV Stereo",
1874 		.video_inputs   = 4,
1875 		/* .audio_inputs= 1, */
1876 		.svhs           = 2,
1877 		.gpiomask       = 0x00,
1878 		.muxsel         = MUXSEL(2, 3, 1, 1),
1879 		.no_msp34xx     = 1,
1880 		.pll            = PLL_28,
1881 		.tuner_type     = TUNER_PHILIPS_PAL,
1882 		.tuner_addr	= ADDR_UNSET,
1883 		/* Notes:
1884 		- card lacks subsystem ID
1885 		- stereo variant w/ daughter board with tda9874a @0xb0
1886 		- Audio Routing:
1887 			always from tda9874 independent of GPIO (?)
1888 			external line in: unknown
1889 		- Other chips: em78p156elp @ 0x96 (probably IR remote control)
1890 			hef4053 (instead 4052) for unknown function
1891 		*/
1892 	},
1893 	[BTTV_BOARD_PACETV] = {
1894 		.name           = "Pace TV & Radio Card",
1895 		.video_inputs   = 4,
1896 		/* .audio_inputs= 1, */
1897 		.svhs           = 2,
1898 		/* Tuner, CVid, SVid, CVid over SVid connector */
1899 		.muxsel         = MUXSEL(2, 3, 1, 1),
1900 		.gpiomask       = 0,
1901 		.no_tda7432     = 1,
1902 		.tuner_type     = TUNER_PHILIPS_PAL_I,
1903 		.tuner_addr	= ADDR_UNSET,
1904 		.has_radio      = 1,
1905 		.pll            = PLL_28,
1906 		/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1907 		only internal line out: (4pin header) RGGL
1908 		Radio must be decoded by msp3410d (not routed through)*/
1909 		/*
1910 		.digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1911 		*/
1912 	},
1913 	[BTTV_BOARD_IVC200] = {
1914 		/* Chris Willing <chris@vislab.usyd.edu.au> */
1915 		.name           = "IVC-200",
1916 		.video_inputs   = 1,
1917 		/* .audio_inputs= 0, */
1918 		.tuner_type     = TUNER_ABSENT,
1919 		.tuner_addr	= ADDR_UNSET,
1920 		.svhs           = NO_SVHS,
1921 		.gpiomask       = 0xdf,
1922 		.muxsel         = MUXSEL(2),
1923 		.pll            = PLL_28,
1924 	},
1925 	[BTTV_BOARD_IVCE8784] = {
1926 		.name           = "IVCE-8784",
1927 		.video_inputs   = 1,
1928 		/* .audio_inputs= 0, */
1929 		.tuner_type     = TUNER_ABSENT,
1930 		.tuner_addr     = ADDR_UNSET,
1931 		.svhs           = NO_SVHS,
1932 		.gpiomask       = 0xdf,
1933 		.muxsel         = MUXSEL(2),
1934 		.pll            = PLL_28,
1935 	},
1936 	[BTTV_BOARD_XGUARD] = {
1937 		.name           = "Grand X-Guard / Trust 814PCI",
1938 		.video_inputs   = 16,
1939 		/* .audio_inputs= 0, */
1940 		.svhs           = NO_SVHS,
1941 		.tuner_type     = TUNER_ABSENT,
1942 		.tuner_addr	= ADDR_UNSET,
1943 		.gpiomask2      = 0xff,
1944 		.muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1945 		.muxsel_hook    = xguard_muxsel,
1946 		.no_msp34xx     = 1,
1947 		.no_tda7432     = 1,
1948 		.pll            = PLL_28,
1949 	},
1950 
1951 		/* ---- card 0x68 ---------------------------------- */
1952 	[BTTV_BOARD_NEBULA_DIGITV] = {
1953 		.name           = "Nebula Electronics DigiTV",
1954 		.video_inputs   = 1,
1955 		.svhs           = NO_SVHS,
1956 		.muxsel         = MUXSEL(2, 3, 1, 0),
1957 		.no_msp34xx     = 1,
1958 		.no_tda7432     = 1,
1959 		.pll            = PLL_28,
1960 		.tuner_type     = TUNER_ABSENT,
1961 		.tuner_addr	= ADDR_UNSET,
1962 		.has_dvb        = 1,
1963 		.has_remote	= 1,
1964 		.gpiomask	= 0x1b,
1965 		.no_gpioirq     = 1,
1966 	},
1967 	[BTTV_BOARD_PV143] = {
1968 		/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1969 		.name           = "ProVideo PV143",
1970 		.video_inputs   = 4,
1971 		/* .audio_inputs= 0, */
1972 		.svhs           = NO_SVHS,
1973 		.gpiomask       = 0,
1974 		.muxsel         = MUXSEL(2, 3, 1, 0),
1975 		.gpiomux        = { 0 },
1976 		.no_msp34xx     = 1,
1977 		.pll            = PLL_28,
1978 		.tuner_type     = TUNER_ABSENT,
1979 		.tuner_addr	= ADDR_UNSET,
1980 	},
1981 	[BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1982 		/* M.Klahr@phytec.de */
1983 		.name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1984 		.video_inputs   = 4,
1985 		/* .audio_inputs= 0, */
1986 		.svhs           = 3,
1987 		.gpiomask       = 0x00,
1988 		.muxsel         = MUXSEL(2, 3, 1, 0),
1989 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1990 		.pll            = PLL_28,
1991 		.tuner_type     = TUNER_ABSENT,
1992 		.tuner_addr	= ADDR_UNSET,
1993 	},
1994 	[BTTV_BOARD_VD009X1_VD011_COMBI] = {
1995 		.name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
1996 		.video_inputs   = 4,
1997 		/* .audio_inputs= 0, */
1998 		.svhs           = 3,
1999 		.gpiomask       = 0x00,
2000 		.muxsel         = MUXSEL(2, 3, 1, 1),
2001 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2002 		.pll            = PLL_28,
2003 		.tuner_type     = TUNER_ABSENT,
2004 		.tuner_addr	= ADDR_UNSET,
2005 	},
2006 
2007 		/* ---- card 0x6c ---------------------------------- */
2008 	[BTTV_BOARD_VD009_MINIDIN] = {
2009 		.name           = "PHYTEC VD-009 MiniDIN (bt878)",
2010 		.video_inputs   = 10,
2011 		/* .audio_inputs= 0, */
2012 		.svhs           = 9,
2013 		.gpiomask       = 0x00,
2014 		.gpiomask2      = 0x03, /* used for external video mux */
2015 		.muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2016 		.muxsel_hook	= phytec_muxsel,
2017 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2018 		.pll            = PLL_28,
2019 		.tuner_type     = TUNER_ABSENT,
2020 		.tuner_addr	= ADDR_UNSET,
2021 	},
2022 	[BTTV_BOARD_VD009_COMBI] = {
2023 		.name           = "PHYTEC VD-009 Combi (bt878)",
2024 		.video_inputs   = 10,
2025 		/* .audio_inputs= 0, */
2026 		.svhs           = 9,
2027 		.gpiomask       = 0x00,
2028 		.gpiomask2      = 0x03, /* used for external video mux */
2029 		.muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2030 		.muxsel_hook	= phytec_muxsel,
2031 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2032 		.pll            = PLL_28,
2033 		.tuner_type     = TUNER_ABSENT,
2034 		.tuner_addr	= ADDR_UNSET,
2035 	},
2036 	[BTTV_BOARD_IVC100] = {
2037 		.name           = "IVC-100",
2038 		.video_inputs   = 4,
2039 		/* .audio_inputs= 0, */
2040 		.tuner_type     = TUNER_ABSENT,
2041 		.tuner_addr	= ADDR_UNSET,
2042 		.svhs           = NO_SVHS,
2043 		.gpiomask       = 0xdf,
2044 		.muxsel         = MUXSEL(2, 3, 1, 0),
2045 		.pll            = PLL_28,
2046 	},
2047 	[BTTV_BOARD_IVC120] = {
2048 		/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2049 		.name           = "IVC-120G",
2050 		.video_inputs   = 16,
2051 		/* .audio_inputs= 0, */
2052 		.tuner_type     = TUNER_ABSENT,
2053 		.tuner_addr	= ADDR_UNSET,
2054 		.svhs           = NO_SVHS,   /* card has no svhs */
2055 		.no_msp34xx     = 1,
2056 		.no_tda7432     = 1,
2057 		.gpiomask       = 0x00,
2058 		.muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2059 		.muxsel_hook    = ivc120_muxsel,
2060 		.pll            = PLL_28,
2061 	},
2062 
2063 		/* ---- card 0x70 ---------------------------------- */
2064 	[BTTV_BOARD_PC_HDTV] = {
2065 		.name           = "pcHDTV HD-2000 TV",
2066 		.video_inputs   = 4,
2067 		/* .audio_inputs= 1, */
2068 		.svhs           = 2,
2069 		.muxsel         = MUXSEL(2, 3, 1, 0),
2070 		.tuner_type     = TUNER_PHILIPS_FCV1236D,
2071 		.tuner_addr	= ADDR_UNSET,
2072 		.has_dvb        = 1,
2073 	},
2074 	[BTTV_BOARD_TWINHAN_DST] = {
2075 		.name           = "Twinhan DST + clones",
2076 		.no_msp34xx     = 1,
2077 		.no_tda7432     = 1,
2078 		.tuner_type     = TUNER_ABSENT,
2079 		.tuner_addr	= ADDR_UNSET,
2080 		.no_video       = 1,
2081 		.has_dvb        = 1,
2082 	},
2083 	[BTTV_BOARD_WINFASTVC100] = {
2084 		.name           = "Winfast VC100",
2085 		.video_inputs   = 3,
2086 		/* .audio_inputs= 0, */
2087 		.svhs           = 1,
2088 		/* Vid In, SVid In, Vid over SVid in connector */
2089 		.muxsel		= MUXSEL(3, 1, 1, 3),
2090 		.no_msp34xx     = 1,
2091 		.no_tda7432     = 1,
2092 		.tuner_type     = TUNER_ABSENT,
2093 		.tuner_addr	= ADDR_UNSET,
2094 		.pll            = PLL_28,
2095 	},
2096 	[BTTV_BOARD_TEV560] = {
2097 		.name           = "Teppro TEV-560/InterVision IV-560",
2098 		.video_inputs   = 3,
2099 		/* .audio_inputs= 1, */
2100 		.svhs           = 2,
2101 		.gpiomask       = 3,
2102 		.muxsel         = MUXSEL(2, 3, 1, 1),
2103 		.gpiomux        = { 1, 1, 1, 1 },
2104 		.tuner_type     = TUNER_PHILIPS_PAL,
2105 		.tuner_addr	= ADDR_UNSET,
2106 		.pll            = PLL_35,
2107 	},
2108 
2109 		/* ---- card 0x74 ---------------------------------- */
2110 	[BTTV_BOARD_SIMUS_GVC1100] = {
2111 		.name           = "SIMUS GVC1100",
2112 		.video_inputs   = 4,
2113 		/* .audio_inputs= 0, */
2114 		.svhs           = NO_SVHS,
2115 		.tuner_type     = TUNER_ABSENT,
2116 		.tuner_addr	= ADDR_UNSET,
2117 		.pll            = PLL_28,
2118 		.muxsel         = MUXSEL(2, 2, 2, 2),
2119 		.gpiomask       = 0x3F,
2120 		.muxsel_hook    = gvc1100_muxsel,
2121 	},
2122 	[BTTV_BOARD_NGSTV_PLUS] = {
2123 		/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2124 		.name           = "NGS NGSTV+",
2125 		.video_inputs   = 3,
2126 		.svhs           = 2,
2127 		.gpiomask       = 0x008007,
2128 		.muxsel         = MUXSEL(2, 3, 0, 0),
2129 		.gpiomux        = { 0, 0, 0, 0 },
2130 		.gpiomute	= 0x000003,
2131 		.pll            = PLL_28,
2132 		.tuner_type     = TUNER_PHILIPS_PAL,
2133 		.tuner_addr	= ADDR_UNSET,
2134 		.has_remote     = 1,
2135 	},
2136 	[BTTV_BOARD_LMLBT4] = {
2137 		/* http://linuxmedialabs.com */
2138 		.name           = "LMLBT4",
2139 		.video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2140 		/* .audio_inputs= 0, */
2141 		.svhs           = NO_SVHS,
2142 		.muxsel         = MUXSEL(2, 3, 1, 0),
2143 		.no_msp34xx     = 1,
2144 		.no_tda7432     = 1,
2145 		.tuner_type     = TUNER_ABSENT,
2146 		.tuner_addr	= ADDR_UNSET,
2147 	},
2148 	[BTTV_BOARD_TEKRAM_M205] = {
2149 		/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2150 		.name           = "Tekram M205 PRO",
2151 		.video_inputs   = 3,
2152 		/* .audio_inputs= 1, */
2153 		.tuner_type     = TUNER_PHILIPS_PAL,
2154 		.tuner_addr	= ADDR_UNSET,
2155 		.svhs           = 2,
2156 		.gpiomask       = 0x68,
2157 		.muxsel         = MUXSEL(2, 3, 1),
2158 		.gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2159 		.pll            = PLL_28,
2160 	},
2161 
2162 		/* ---- card 0x78 ---------------------------------- */
2163 	[BTTV_BOARD_CONTVFMI] = {
2164 		/* Javier Cendan Ares <jcendan@lycos.es> */
2165 		/* bt878 TV + FM without subsystem ID */
2166 		.name           = "Conceptronic CONTVFMi",
2167 		.video_inputs   = 3,
2168 		/* .audio_inputs= 1, */
2169 		.svhs           = 2,
2170 		.gpiomask       = 0x008007,
2171 		.muxsel         = MUXSEL(2, 3, 1, 1),
2172 		.gpiomux        = { 0, 1, 2, 2 },
2173 		.gpiomute	= 3,
2174 		.pll            = PLL_28,
2175 		.tuner_type     = TUNER_PHILIPS_PAL,
2176 		.tuner_addr	= ADDR_UNSET,
2177 		.has_remote     = 1,
2178 		.has_radio      = 1,
2179 	},
2180 	[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2181 		/*Eric DEBIEF <debief@telemsa.com>*/
2182 		/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2183 		/*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/
2184 		/*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/
2185 		.name           = "Euresys Picolo Tetra",
2186 		.video_inputs   = 4,
2187 		/* .audio_inputs= 0, */
2188 		.svhs           = NO_SVHS,
2189 		.gpiomask       = 0,
2190 		.gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2191 		.no_msp34xx     = 1,
2192 		.no_tda7432     = 1,
2193 		/*878A input is always MUX0, see above.*/
2194 		.muxsel         = MUXSEL(2, 2, 2, 2),
2195 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2196 		.pll            = PLL_28,
2197 		.muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2198 		.tuner_type     = TUNER_ABSENT,
2199 		.tuner_addr	= ADDR_UNSET,
2200 	},
2201 	[BTTV_BOARD_SPIRIT_TV] = {
2202 		/* Spirit TV Tuner from http://spiritmodems.com.au */
2203 		/* Stafford Goodsell <surge@goliath.homeunix.org> */
2204 		.name           = "Spirit TV Tuner",
2205 		.video_inputs   = 3,
2206 		/* .audio_inputs= 1, */
2207 		.svhs           = 2,
2208 		.gpiomask       = 0x0000000f,
2209 		.muxsel         = MUXSEL(2, 1, 1),
2210 		.gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2211 		.tuner_type     = TUNER_TEMIC_PAL,
2212 		.tuner_addr	= ADDR_UNSET,
2213 		.no_msp34xx     = 1,
2214 	},
2215 	[BTTV_BOARD_AVDVBT_771] = {
2216 		/* Wolfram Joost <wojo@frokaschwei.de> */
2217 		.name           = "AVerMedia AVerTV DVB-T 771",
2218 		.video_inputs   = 2,
2219 		.svhs           = 1,
2220 		.tuner_type     = TUNER_ABSENT,
2221 		.tuner_addr	= ADDR_UNSET,
2222 		.muxsel         = MUXSEL(3, 3),
2223 		.no_msp34xx     = 1,
2224 		.no_tda7432     = 1,
2225 		.pll            = PLL_28,
2226 		.has_dvb        = 1,
2227 		.no_gpioirq     = 1,
2228 		.has_remote     = 1,
2229 	},
2230 		/* ---- card 0x7c ---------------------------------- */
2231 	[BTTV_BOARD_AVDVBT_761] = {
2232 		/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2233 		/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2234 		.name           = "AverMedia AverTV DVB-T 761",
2235 		.video_inputs   = 2,
2236 		.svhs           = 1,
2237 		.muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2238 		.no_msp34xx     = 1,
2239 		.no_tda7432     = 1,
2240 		.pll            = PLL_28,
2241 		.tuner_type     = TUNER_ABSENT,
2242 		.tuner_addr	= ADDR_UNSET,
2243 		.has_dvb        = 1,
2244 		.no_gpioirq     = 1,
2245 		.has_remote     = 1,
2246 	},
2247 	[BTTV_BOARD_MATRIX_VISIONSQ] = {
2248 		/* andre.schwarz@matrix-vision.de */
2249 		.name		= "MATRIX Vision Sigma-SQ",
2250 		.video_inputs	= 16,
2251 		/* .audio_inputs= 0, */
2252 		.svhs		= NO_SVHS,
2253 		.gpiomask	= 0x0,
2254 		.muxsel		= MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2255 		.muxsel_hook	= sigmaSQ_muxsel,
2256 		.gpiomux	= { 0 },
2257 		.no_msp34xx	= 1,
2258 		.pll		= PLL_28,
2259 		.tuner_type	= TUNER_ABSENT,
2260 		.tuner_addr	= ADDR_UNSET,
2261 	},
2262 	[BTTV_BOARD_MATRIX_VISIONSLC] = {
2263 		/* andre.schwarz@matrix-vision.de */
2264 		.name		= "MATRIX Vision Sigma-SLC",
2265 		.video_inputs	= 4,
2266 		/* .audio_inputs= 0, */
2267 		.svhs		= NO_SVHS,
2268 		.gpiomask	= 0x0,
2269 		.muxsel		= MUXSEL(2, 2, 2, 2),
2270 		.muxsel_hook	= sigmaSLC_muxsel,
2271 		.gpiomux	= { 0 },
2272 		.no_msp34xx	= 1,
2273 		.pll		= PLL_28,
2274 		.tuner_type	= TUNER_ABSENT,
2275 		.tuner_addr	= ADDR_UNSET,
2276 	},
2277 		/* BTTV_BOARD_APAC_VIEWCOMP */
2278 	[BTTV_BOARD_APAC_VIEWCOMP] = {
2279 		/* Attila Kondoros <attila.kondoros@chello.hu> */
2280 		/* bt878 TV + FM 0x00000000 subsystem ID */
2281 		.name           = "APAC Viewcomp 878(AMAX)",
2282 		.video_inputs   = 2,
2283 		/* .audio_inputs= 1, */
2284 		.svhs           = NO_SVHS,
2285 		.gpiomask       = 0xFF,
2286 		.muxsel         = MUXSEL(2, 3, 1, 1),
2287 		.gpiomux        = { 2, 0, 0, 0 },
2288 		.gpiomute	= 10,
2289 		.pll            = PLL_28,
2290 		.tuner_type     = TUNER_PHILIPS_PAL,
2291 		.tuner_addr	= ADDR_UNSET,
2292 		.has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2293 		.has_radio      = 1,   /* not every card has radio */
2294 	},
2295 
2296 		/* ---- card 0x80 ---------------------------------- */
2297 	[BTTV_BOARD_DVICO_DVBT_LITE] = {
2298 		/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2299 		.name           = "DViCO FusionHDTV DVB-T Lite",
2300 		.no_msp34xx     = 1,
2301 		.no_tda7432     = 1,
2302 		.pll            = PLL_28,
2303 		.no_video       = 1,
2304 		.has_dvb        = 1,
2305 		.tuner_type     = TUNER_ABSENT,
2306 		.tuner_addr	= ADDR_UNSET,
2307 	},
2308 	[BTTV_BOARD_VGEAR_MYVCD] = {
2309 		/* Steven <photon38@pchome.com.tw> */
2310 		.name           = "V-Gear MyVCD",
2311 		.video_inputs   = 3,
2312 		/* .audio_inputs= 1, */
2313 		.svhs           = 2,
2314 		.gpiomask       = 0x3f,
2315 		.muxsel         = MUXSEL(2, 3, 1, 0),
2316 		.gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2317 		.gpiomute	= 0x31,
2318 		.no_msp34xx     = 1,
2319 		.pll            = PLL_28,
2320 		.tuner_type     = TUNER_PHILIPS_NTSC_M,
2321 		.tuner_addr	= ADDR_UNSET,
2322 		.has_radio      = 0,
2323 	},
2324 	[BTTV_BOARD_SUPER_TV] = {
2325 		/* Rick C <cryptdragoon@gmail.com> */
2326 		.name           = "Super TV Tuner",
2327 		.video_inputs   = 4,
2328 		/* .audio_inputs= 1, */
2329 		.svhs           = 2,
2330 		.muxsel         = MUXSEL(2, 3, 1, 0),
2331 		.tuner_type     = TUNER_PHILIPS_NTSC,
2332 		.tuner_addr	= ADDR_UNSET,
2333 		.gpiomask       = 0x008007,
2334 		.gpiomux        = { 0, 0x000001,0,0 },
2335 		.has_radio      = 1,
2336 	},
2337 	[BTTV_BOARD_TIBET_CS16] = {
2338 		/* Chris Fanning <video4linux@haydon.net> */
2339 		.name           = "Tibet Systems 'Progress DVR' CS16",
2340 		.video_inputs   = 16,
2341 		/* .audio_inputs= 0, */
2342 		.svhs           = NO_SVHS,
2343 		.muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2344 		.pll		= PLL_28,
2345 		.no_msp34xx     = 1,
2346 		.no_tda7432	= 1,
2347 		.tuner_type     = TUNER_ABSENT,
2348 		.tuner_addr	= ADDR_UNSET,
2349 		.muxsel_hook    = tibetCS16_muxsel,
2350 	},
2351 	[BTTV_BOARD_KODICOM_4400R] = {
2352 		/* Bill Brack <wbrack@mmm.com.hk> */
2353 		/*
2354 		* Note that, because of the card's wiring, the "master"
2355 		* BT878A chip (i.e. the one which controls the analog switch
2356 		* and must use this card type) is the 2nd one detected.  The
2357 		* other 3 chips should use card type 0x85, whose description
2358 		* follows this one.  There is a EEPROM on the card (which is
2359 		* connected to the I2C of one of those other chips), but is
2360 		* not currently handled.  There is also a facility for a
2361 		* "monitor", which is also not currently implemented.
2362 		*/
2363 		.name           = "Kodicom 4400R (master)",
2364 		.video_inputs	= 16,
2365 		/* .audio_inputs= 0, */
2366 		.tuner_type	= TUNER_ABSENT,
2367 		.tuner_addr	= ADDR_UNSET,
2368 		.svhs		= NO_SVHS,
2369 		/* GPIO bits 0-9 used for analog switch:
2370 		*   00 - 03:	camera selector
2371 		*   04 - 06:	channel (controller) selector
2372 		*   07:	data (1->on, 0->off)
2373 		*   08:	strobe
2374 		*   09:	reset
2375 		* bit 16 is input from sync separator for the channel
2376 		*/
2377 		.gpiomask	= 0x0003ff,
2378 		.no_gpioirq     = 1,
2379 		.muxsel		= MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2380 		.pll		= PLL_28,
2381 		.no_msp34xx	= 1,
2382 		.no_tda7432	= 1,
2383 		.muxsel_hook	= kodicom4400r_muxsel,
2384 	},
2385 	[BTTV_BOARD_KODICOM_4400R_SL] = {
2386 		/* Bill Brack <wbrack@mmm.com.hk> */
2387 		/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2388 		* one which controls the analog switch, and must use the card type)
2389 		* is the 2nd one detected.  The other 3 chips should use this card
2390 		* type
2391 		*/
2392 		.name		= "Kodicom 4400R (slave)",
2393 		.video_inputs	= 16,
2394 		/* .audio_inputs= 0, */
2395 		.tuner_type	= TUNER_ABSENT,
2396 		.tuner_addr	= ADDR_UNSET,
2397 		.svhs		= NO_SVHS,
2398 		.gpiomask	= 0x010000,
2399 		.no_gpioirq     = 1,
2400 		.muxsel		= MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2401 		.pll		= PLL_28,
2402 		.no_msp34xx	= 1,
2403 		.no_tda7432	= 1,
2404 		.muxsel_hook	= kodicom4400r_muxsel,
2405 	},
2406 		/* ---- card 0x86---------------------------------- */
2407 	[BTTV_BOARD_ADLINK_RTV24] = {
2408 		/* Michael Henson <mhenson@clarityvi.com> */
2409 		/* Adlink RTV24 with special unlock codes */
2410 		.name           = "Adlink RTV24",
2411 		.video_inputs   = 4,
2412 		/* .audio_inputs= 1, */
2413 		.svhs           = 2,
2414 		.muxsel         = MUXSEL(2, 3, 1, 0),
2415 		.tuner_type     = UNSET,
2416 		.tuner_addr	= ADDR_UNSET,
2417 		.pll            = PLL_28,
2418 	},
2419 		/* ---- card 0x87---------------------------------- */
2420 	[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2421 		/* Michael Krufky <mkrufky@linuxtv.org> */
2422 		.name           = "DViCO FusionHDTV 5 Lite",
2423 		.tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2424 		.tuner_addr	= ADDR_UNSET,
2425 		.video_inputs   = 3,
2426 		/* .audio_inputs= 1, */
2427 		.svhs           = 2,
2428 		.muxsel		= MUXSEL(2, 3, 1),
2429 		.gpiomask       = 0x00e00007,
2430 		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2431 		.gpiomute	= 0x00c00007,
2432 		.no_msp34xx     = 1,
2433 		.no_tda7432     = 1,
2434 		.has_dvb        = 1,
2435 	},
2436 		/* ---- card 0x88---------------------------------- */
2437 	[BTTV_BOARD_ACORP_Y878F] = {
2438 		/* Mauro Carvalho Chehab <mchehab@kernel.org> */
2439 		.name		= "Acorp Y878F",
2440 		.video_inputs	= 3,
2441 		/* .audio_inputs= 1, */
2442 		.svhs		= 2,
2443 		.gpiomask	= 0x01fe00,
2444 		.muxsel		= MUXSEL(2, 3, 1, 1),
2445 		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2446 		.gpiomute	= 0x002000,
2447 		.pll		= PLL_28,
2448 		.tuner_type	= TUNER_YMEC_TVF66T5_B_DFF,
2449 		.tuner_addr	= 0xc1 >>1,
2450 		.has_radio	= 1,
2451 	},
2452 		/* ---- card 0x89 ---------------------------------- */
2453 	[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2454 		.name           = "Conceptronic CTVFMi v2",
2455 		.video_inputs   = 3,
2456 		/* .audio_inputs= 1, */
2457 		.svhs           = 2,
2458 		.gpiomask       = 0x001c0007,
2459 		.muxsel         = MUXSEL(2, 3, 1, 1),
2460 		.gpiomux        = { 0, 1, 2, 2 },
2461 		.gpiomute	= 3,
2462 		.pll            = PLL_28,
2463 		.tuner_type     = TUNER_TENA_9533_DI,
2464 		.tuner_addr	= ADDR_UNSET,
2465 		.has_remote     = 1,
2466 		.has_radio      = 1,
2467 	},
2468 		/* ---- card 0x8a ---------------------------------- */
2469 	[BTTV_BOARD_PV_BT878P_2E] = {
2470 		.name		= "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2471 		.video_inputs	= 5,
2472 		/* .audio_inputs= 1, */
2473 		.svhs		= 3,
2474 		.has_dig_in	= 1,
2475 		.gpiomask	= 0x01fe00,
2476 		.muxsel		= MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2477 		/* .digital_mode= DIGITAL_MODE_CAMERA, */
2478 		.gpiomux	= { 0x00400, 0x10400, 0x04400, 0x80000 },
2479 		.gpiomute	= 0x12400,
2480 		.no_msp34xx	= 1,
2481 		.pll		= PLL_28,
2482 		.tuner_type	= TUNER_LG_PAL_FM,
2483 		.tuner_addr	= ADDR_UNSET,
2484 		.has_remote	= 1,
2485 	},
2486 		/* ---- card 0x8b ---------------------------------- */
2487 	[BTTV_BOARD_PV_M4900] = {
2488 		/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2489 		.name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2490 		.video_inputs   = 3,
2491 		/* .audio_inputs= 1, */
2492 		.svhs           = 2,
2493 		.gpiomask       = 0x3f,
2494 		.muxsel         = MUXSEL(2, 3, 1, 1),
2495 		.gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2496 		.gpiomute	= 0x29,
2497 		.no_msp34xx     = 1,
2498 		.pll            = PLL_28,
2499 		.tuner_type     = TUNER_YMEC_TVF_5533MF,
2500 		.tuner_addr     = ADDR_UNSET,
2501 		.has_radio      = 1,
2502 		.has_remote     = 1,
2503 	},
2504 		/* ---- card 0x8c ---------------------------------- */
2505 	/* Has four Bt878 chips behind a PCI bridge, each chip has:
2506 	     one external BNC composite input (mux 2)
2507 	     three internal composite inputs (unknown muxes)
2508 	     an 18-bit stereo A/D (CS5331A), which has:
2509 	       one external stereo unbalanced (RCA) audio connection
2510 	       one (or 3?) internal stereo balanced (XLR) audio connection
2511 	       input is selected via gpio to a 14052B mux
2512 		 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2513 	       gain is controlled via an X9221A chip on the I2C bus @0x28
2514 	       sample rate is controlled via gpio to an MK1413S
2515 		 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2516 	     There is neither a tuner nor an svideo input. */
2517 	[BTTV_BOARD_OSPREY440]  = {
2518 		.name           = "Osprey 440",
2519 		.video_inputs   = 4,
2520 		/* .audio_inputs= 2, */
2521 		.svhs           = NO_SVHS,
2522 		.muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2523 		.gpiomask	= 0x303,
2524 		.gpiomute	= 0x000, /* int + 32kHz */
2525 		.gpiomux	= { 0, 0, 0x000, 0x100},
2526 		.pll            = PLL_28,
2527 		.tuner_type     = TUNER_ABSENT,
2528 		.tuner_addr     = ADDR_UNSET,
2529 		.no_msp34xx     = 1,
2530 		.no_tda7432     = 1,
2531 	},
2532 		/* ---- card 0x8d ---------------------------------- */
2533 	[BTTV_BOARD_ASOUND_SKYEYE] = {
2534 		.name		= "Asound Skyeye PCTV",
2535 		.video_inputs	= 3,
2536 		/* .audio_inputs= 1, */
2537 		.svhs		= 2,
2538 		.gpiomask	= 15,
2539 		.muxsel		= MUXSEL(2, 3, 1, 1),
2540 		.gpiomux	= { 2, 0, 0, 0 },
2541 		.gpiomute	= 1,
2542 		.pll		= PLL_28,
2543 		.tuner_type	= TUNER_PHILIPS_NTSC,
2544 		.tuner_addr	= ADDR_UNSET,
2545 	},
2546 		/* ---- card 0x8e ---------------------------------- */
2547 	[BTTV_BOARD_SABRENT_TVFM] = {
2548 		.name		= "Sabrent TV-FM (bttv version)",
2549 		.video_inputs	= 3,
2550 		/* .audio_inputs= 1, */
2551 		.svhs		= 2,
2552 		.gpiomask	= 0x108007,
2553 		.muxsel		= MUXSEL(2, 3, 1, 1),
2554 		.gpiomux	= { 100000, 100002, 100002, 100000 },
2555 		.no_msp34xx	= 1,
2556 		.no_tda7432     = 1,
2557 		.pll		= PLL_28,
2558 		.tuner_type	= TUNER_TNF_5335MF,
2559 		.tuner_addr	= ADDR_UNSET,
2560 		.has_radio      = 1,
2561 	},
2562 	/* ---- card 0x8f ---------------------------------- */
2563 	[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2564 		.name		= "Hauppauge ImpactVCB (bt878)",
2565 		.video_inputs	= 4,
2566 		/* .audio_inputs= 0, */
2567 		.svhs		= NO_SVHS,
2568 		.gpiomask	= 0x0f, /* old: 7 */
2569 		.muxsel		= MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2570 		.no_msp34xx	= 1,
2571 		.no_tda7432     = 1,
2572 		.tuner_type	= TUNER_ABSENT,
2573 		.tuner_addr	= ADDR_UNSET,
2574 	},
2575 	[BTTV_BOARD_MACHTV_MAGICTV] = {
2576 		/* Julian Calaby <julian.calaby@gmail.com>
2577 		 * Slightly different from original MachTV definition (0x60)
2578 
2579 		 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2580 		 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2581 		 * properly (methinks) causing no keyup bits being set */
2582 
2583 		.name           = "MagicTV", /* rebranded MachTV */
2584 		.video_inputs   = 3,
2585 		/* .audio_inputs= 1, */
2586 		.svhs           = 2,
2587 		.gpiomask       = 7,
2588 		.muxsel         = MUXSEL(2, 3, 1, 1),
2589 		.gpiomux        = { 0, 1, 2, 3 },
2590 		.gpiomute	= 4,
2591 		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2592 		.tuner_addr     = ADDR_UNSET,
2593 		.pll            = PLL_28,
2594 		.has_radio      = 1,
2595 		.has_remote     = 1,
2596 	},
2597 	[BTTV_BOARD_SSAI_SECURITY] = {
2598 		.name		= "SSAI Security Video Interface",
2599 		.video_inputs	= 4,
2600 		/* .audio_inputs= 0, */
2601 		.svhs		= NO_SVHS,
2602 		.muxsel		= MUXSEL(0, 1, 2, 3),
2603 		.tuner_type	= TUNER_ABSENT,
2604 		.tuner_addr	= ADDR_UNSET,
2605 	},
2606 	[BTTV_BOARD_SSAI_ULTRASOUND] = {
2607 		.name		= "SSAI Ultrasound Video Interface",
2608 		.video_inputs	= 2,
2609 		/* .audio_inputs= 0, */
2610 		.svhs		= 1,
2611 		.muxsel		= MUXSEL(2, 0, 1, 3),
2612 		.tuner_type	= TUNER_ABSENT,
2613 		.tuner_addr	= ADDR_UNSET,
2614 	},
2615 	/* ---- card 0x94---------------------------------- */
2616 	[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2617 		.name           = "DViCO FusionHDTV 2",
2618 		.tuner_type     = TUNER_PHILIPS_FCV1236D,
2619 		.tuner_addr	= ADDR_UNSET,
2620 		.video_inputs   = 3,
2621 		/* .audio_inputs= 1, */
2622 		.svhs           = 2,
2623 		.muxsel		= MUXSEL(2, 3, 1),
2624 		.gpiomask       = 0x00e00007,
2625 		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2626 		.gpiomute	= 0x00c00007,
2627 		.no_msp34xx     = 1,
2628 		.no_tda7432     = 1,
2629 	},
2630 	/* ---- card 0x95---------------------------------- */
2631 	[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2632 		.name           = "Typhoon TV-Tuner PCI (50684)",
2633 		.video_inputs   = 3,
2634 		/* .audio_inputs= 1, */
2635 		.svhs           = 2,
2636 		.gpiomask       = 0x3014f,
2637 		.muxsel         = MUXSEL(2, 3, 1, 1),
2638 		.gpiomux        = { 0x20001,0x10001, 0, 0 },
2639 		.gpiomute       = 10,
2640 		.pll            = PLL_28,
2641 		.tuner_type     = TUNER_PHILIPS_PAL_I,
2642 		.tuner_addr     = ADDR_UNSET,
2643 	},
2644 	[BTTV_BOARD_GEOVISION_GV600] = {
2645 		/* emhn@usb.ve */
2646 		.name		= "Geovision GV-600",
2647 		.video_inputs	= 16,
2648 		/* .audio_inputs= 0, */
2649 		.svhs		= NO_SVHS,
2650 		.gpiomask	= 0x0,
2651 		.muxsel		= MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2652 		.muxsel_hook	= geovision_muxsel,
2653 		.gpiomux	= { 0 },
2654 		.no_msp34xx	= 1,
2655 		.pll		= PLL_28,
2656 		.tuner_type	= TUNER_ABSENT,
2657 		.tuner_addr	= ADDR_UNSET,
2658 	},
2659 	[BTTV_BOARD_KOZUMI_KTV_01C] = {
2660 		/* Mauro Lacy <mauro@lacy.com.ar>
2661 		 * Based on MagicTV and Conceptronic CONTVFMi */
2662 
2663 		.name           = "Kozumi KTV-01C",
2664 		.video_inputs   = 3,
2665 		/* .audio_inputs= 1, */
2666 		.svhs           = 2,
2667 		.gpiomask       = 0x008007,
2668 		.muxsel         = MUXSEL(2, 3, 1, 1),
2669 		.gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2670 		.gpiomute	= 3, /* CONTVFMi */
2671 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2672 		.tuner_addr     = ADDR_UNSET,
2673 		.pll            = PLL_28,
2674 		.has_radio      = 1,
2675 		.has_remote     = 1,
2676 	},
2677 	[BTTV_BOARD_ENLTV_FM_2] = {
2678 		/* Encore TV Tuner Pro ENL TV-FM-2
2679 		   Mauro Carvalho Chehab <mchehab@kernel.org> */
2680 		.name           = "Encore ENL TV-FM-2",
2681 		.video_inputs   = 3,
2682 		/* .audio_inputs= 1, */
2683 		.svhs           = 2,
2684 		/* bit 6          -> IR disabled
2685 		   bit 18/17 = 00 -> mute
2686 			       01 -> enable external audio input
2687 			       10 -> internal audio input (mono?)
2688 			       11 -> internal audio input
2689 		 */
2690 		.gpiomask       = 0x060040,
2691 		.muxsel         = MUXSEL(2, 3, 3),
2692 		.gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2693 		.gpiomute	= 0,
2694 		.tuner_type	= TUNER_TCL_MF02GIP_5N,
2695 		.tuner_addr     = ADDR_UNSET,
2696 		.pll            = PLL_28,
2697 		.has_radio      = 1,
2698 		.has_remote     = 1,
2699 	},
2700 	[BTTV_BOARD_VD012] = {
2701 		/* D.Heer@Phytec.de */
2702 		.name           = "PHYTEC VD-012 (bt878)",
2703 		.video_inputs   = 4,
2704 		/* .audio_inputs= 0, */
2705 		.svhs           = NO_SVHS,
2706 		.gpiomask       = 0x00,
2707 		.muxsel         = MUXSEL(0, 2, 3, 1),
2708 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2709 		.pll            = PLL_28,
2710 		.tuner_type     = TUNER_ABSENT,
2711 		.tuner_addr	= ADDR_UNSET,
2712 	},
2713 	[BTTV_BOARD_VD012_X1] = {
2714 		/* D.Heer@Phytec.de */
2715 		.name           = "PHYTEC VD-012-X1 (bt878)",
2716 		.video_inputs   = 4,
2717 		/* .audio_inputs= 0, */
2718 		.svhs           = 3,
2719 		.gpiomask       = 0x00,
2720 		.muxsel         = MUXSEL(2, 3, 1),
2721 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2722 		.pll            = PLL_28,
2723 		.tuner_type     = TUNER_ABSENT,
2724 		.tuner_addr	= ADDR_UNSET,
2725 	},
2726 	[BTTV_BOARD_VD012_X2] = {
2727 		/* D.Heer@Phytec.de */
2728 		.name           = "PHYTEC VD-012-X2 (bt878)",
2729 		.video_inputs   = 4,
2730 		/* .audio_inputs= 0, */
2731 		.svhs           = 3,
2732 		.gpiomask       = 0x00,
2733 		.muxsel         = MUXSEL(3, 2, 1),
2734 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2735 		.pll            = PLL_28,
2736 		.tuner_type     = TUNER_ABSENT,
2737 		.tuner_addr	= ADDR_UNSET,
2738 	},
2739 	[BTTV_BOARD_GEOVISION_GV800S] = {
2740 		/* Bruno Christo <bchristo@inf.ufsm.br>
2741 		 *
2742 		 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2743 		 *	1 audio input  per BT878A = 4 audio inputs
2744 		 *	4 video inputs per BT878A = 16 video inputs
2745 		 * This is the first BT878A chip of the GV-800(S). It's the
2746 		 * "master" chip and it controls the video inputs through an
2747 		 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2748 		 * slaves should use card type 0x9e (following this one).
2749 		 * There is a EEPROM on the card which is currently not handled.
2750 		 * The audio input is not working yet.
2751 		 */
2752 		.name           = "Geovision GV-800(S) (master)",
2753 		.video_inputs   = 4,
2754 		/* .audio_inputs= 1, */
2755 		.tuner_type	= TUNER_ABSENT,
2756 		.tuner_addr	= ADDR_UNSET,
2757 		.svhs           = NO_SVHS,
2758 		.gpiomask	= 0xf107f,
2759 		.no_gpioirq     = 1,
2760 		.muxsel		= MUXSEL(2, 2, 2, 2),
2761 		.pll		= PLL_28,
2762 		.no_msp34xx	= 1,
2763 		.no_tda7432	= 1,
2764 		.muxsel_hook    = gv800s_muxsel,
2765 	},
2766 	[BTTV_BOARD_GEOVISION_GV800S_SL] = {
2767 		/* Bruno Christo <bchristo@inf.ufsm.br>
2768 		 *
2769 		 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2770 		 *	1 audio input  per BT878A = 4 audio inputs
2771 		 *	4 video inputs per BT878A = 16 video inputs
2772 		 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2773 		 * and should use this card type.
2774 		 * The audio input is not working yet.
2775 		 */
2776 		.name           = "Geovision GV-800(S) (slave)",
2777 		.video_inputs   = 4,
2778 		/* .audio_inputs= 1, */
2779 		.tuner_type	= TUNER_ABSENT,
2780 		.tuner_addr	= ADDR_UNSET,
2781 		.svhs           = NO_SVHS,
2782 		.gpiomask	= 0x00,
2783 		.no_gpioirq     = 1,
2784 		.muxsel		= MUXSEL(2, 2, 2, 2),
2785 		.pll		= PLL_28,
2786 		.no_msp34xx	= 1,
2787 		.no_tda7432	= 1,
2788 		.muxsel_hook    = gv800s_muxsel,
2789 	},
2790 	[BTTV_BOARD_PV183] = {
2791 		.name           = "ProVideo PV183", /* 0x9f */
2792 		.video_inputs   = 2,
2793 		/* .audio_inputs= 0, */
2794 		.svhs           = NO_SVHS,
2795 		.gpiomask       = 0,
2796 		.muxsel         = MUXSEL(2, 3),
2797 		.gpiomux        = { 0 },
2798 		.no_msp34xx     = 1,
2799 		.pll            = PLL_28,
2800 		.tuner_type     = TUNER_ABSENT,
2801 		.tuner_addr	= ADDR_UNSET,
2802 	},
2803 	/* ---- card 0xa0---------------------------------- */
2804 	[BTTV_BOARD_TVT_TD3116] = {
2805 		.name           = "Tongwei Video Technology TD-3116",
2806 		.video_inputs   = 16,
2807 		.gpiomask       = 0xc00ff,
2808 		.muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2809 		.muxsel_hook    = td3116_muxsel,
2810 		.svhs           = NO_SVHS,
2811 		.pll		= PLL_28,
2812 		.tuner_type     = TUNER_ABSENT,
2813 	},
2814 	[BTTV_BOARD_APOSONIC_WDVR] = {
2815 		.name           = "Aposonic W-DVR",
2816 		.video_inputs   = 4,
2817 		.svhs           = NO_SVHS,
2818 		.muxsel         = MUXSEL(2, 3, 1, 0),
2819 		.tuner_type     = TUNER_ABSENT,
2820 	},
2821 	[BTTV_BOARD_ADLINK_MPG24] = {
2822 		/* Adlink MPG24 */
2823 		.name           = "Adlink MPG24",
2824 		.video_inputs   = 1,
2825 		/* .audio_inputs= 1, */
2826 		.svhs           = NO_SVHS,
2827 		.muxsel         = MUXSEL(2, 2, 2, 2),
2828 		.tuner_type     = UNSET,
2829 		.tuner_addr	= ADDR_UNSET,
2830 		.pll            = PLL_28,
2831 	},
2832 	[BTTV_BOARD_BT848_CAP_14] = {
2833 		.name		= "Bt848 Capture 14MHz",
2834 		.video_inputs	= 4,
2835 		.svhs		= 2,
2836 		.muxsel		= MUXSEL(2, 3, 1, 0),
2837 		.pll		= PLL_14,
2838 		.tuner_type	= TUNER_ABSENT,
2839 	},
2840 	[BTTV_BOARD_CYBERVISION_CV06] = {
2841 		.name		= "CyberVision CV06 (SV)",
2842 		.video_inputs	= 4,
2843 		/* .audio_inputs= 0, */
2844 		.svhs		= NO_SVHS,
2845 		.muxsel		= MUXSEL(2, 3, 1, 0),
2846 		.pll		= PLL_28,
2847 		.tuner_type	= TUNER_ABSENT,
2848 		.tuner_addr	= ADDR_UNSET,
2849 	},
2850 	[BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2851 		/* Pojar George <geoubuntu@gmail.com> */
2852 		.name           = "Kworld V-Stream Xpert TV PVR878",
2853 		.video_inputs   = 3,
2854 		/* .audio_inputs= 1, */
2855 		.svhs           = 2,
2856 		.gpiomask       = 0x001c0007,
2857 		.muxsel         = MUXSEL(2, 3, 1, 1),
2858 		.gpiomux        = { 0, 1, 2, 2 },
2859 		.gpiomute       = 3,
2860 		.pll            = PLL_28,
2861 		.tuner_type     = TUNER_TENA_9533_DI,
2862 		.tuner_addr    = ADDR_UNSET,
2863 		.has_remote     = 1,
2864 		.has_radio      = 1,
2865 	},
2866 	/* ---- card 0xa6---------------------------------- */
2867 	[BTTV_BOARD_PCI_8604PW] = {
2868 		/* PCI-8604PW with special unlock sequence */
2869 		.name           = "PCI-8604PW",
2870 		.video_inputs   = 2,
2871 		/* .audio_inputs= 0, */
2872 		.svhs           = NO_SVHS,
2873 		/* The second input is available on CN4, if populated.
2874 		 * The other 5x2 header (CN2?) connects to the same inputs
2875 		 * as the on-board BNCs */
2876 		.muxsel         = MUXSEL(2, 3),
2877 		.tuner_type     = TUNER_ABSENT,
2878 		.no_msp34xx	= 1,
2879 		.no_tda7432	= 1,
2880 		.pll            = PLL_35,
2881 	},
2882 };
2883 
2884 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2885 
2886 /* ----------------------------------------------------------------------- */
2887 
2888 static unsigned char eeprom_data[256];
2889 
2890 /*
2891  * identify card
2892  */
bttv_idcard(struct bttv * btv)2893 void bttv_idcard(struct bttv *btv)
2894 {
2895 	unsigned int gpiobits;
2896 	int i,type;
2897 
2898 	/* read PCI subsystem ID */
2899 	btv->cardid  = btv->c.pci->subsystem_device << 16;
2900 	btv->cardid |= btv->c.pci->subsystem_vendor;
2901 
2902 	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2903 		/* look for the card */
2904 		for (type = -1, i = 0; cards[i].id != 0; i++)
2905 			if (cards[i].id  == btv->cardid)
2906 				type = i;
2907 
2908 		if (type != -1) {
2909 			/* found it */
2910 			pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2911 				btv->c.nr, cards[type].name, cards[type].cardnr,
2912 				btv->cardid & 0xffff,
2913 				(btv->cardid >> 16) & 0xffff);
2914 			btv->c.type = cards[type].cardnr;
2915 		} else {
2916 			/* 404 */
2917 			pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2918 				btv->c.nr, btv->cardid & 0xffff,
2919 				(btv->cardid >> 16) & 0xffff);
2920 			pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2921 		}
2922 	}
2923 
2924 	/* let the user override the autodetected type */
2925 	if (card[btv->c.nr] < bttv_num_tvcards)
2926 		btv->c.type=card[btv->c.nr];
2927 
2928 	/* print which card config we are using */
2929 	pr_info("%d: using: %s [card=%d,%s]\n",
2930 		btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2931 		card[btv->c.nr] < bttv_num_tvcards
2932 		? "insmod option" : "autodetected");
2933 
2934 	/* overwrite gpio stuff ?? */
2935 	if (UNSET == audioall && UNSET == audiomux[0])
2936 		return;
2937 
2938 	if (UNSET != audiomux[0]) {
2939 		gpiobits = 0;
2940 		for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2941 			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2942 			gpiobits |= audiomux[i];
2943 		}
2944 	} else {
2945 		gpiobits = audioall;
2946 		for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2947 			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2948 		}
2949 	}
2950 	bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2951 	pr_info("%d: gpio config override: mask=0x%x, mux=",
2952 		btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2953 	for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2954 		pr_cont("%s0x%x",
2955 			i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2956 	}
2957 	pr_cont("\n");
2958 }
2959 
2960 /*
2961  * (most) board specific initialisations goes here
2962  */
2963 
2964 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
identify_by_eeprom(struct bttv * btv,unsigned char eeprom_data[256])2965 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2966 {
2967 	int type = -1;
2968 
2969 	if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2970 		type = BTTV_BOARD_MODTEC_205;
2971 	else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2972 		type = BTTV_BOARD_EURESYS_PICOLO;
2973 	else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2974 		type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2975 
2976 	if (-1 != type) {
2977 		btv->c.type = type;
2978 		pr_info("%d: detected by eeprom: %s [card=%d]\n",
2979 			btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2980 	}
2981 }
2982 
flyvideo_gpio(struct bttv * btv)2983 static void flyvideo_gpio(struct bttv *btv)
2984 {
2985 	int gpio, has_remote, has_radio, is_capture_only;
2986 	int is_lr90, has_tda9820_tda9821;
2987 	int tuner_type = UNSET, ttype;
2988 
2989 	gpio_inout(0xffffff, 0);
2990 	udelay(8);  /* without this we would see the 0x1800 mask */
2991 	gpio = gpio_read();
2992 	/* FIXME: must restore OUR_EN ??? */
2993 
2994 	/* all cards provide GPIO info, some have an additional eeprom
2995 	 * LR50: GPIO coding can be found lower right CP1 .. CP9
2996 	 *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2997 	 *       GPIO14-12: n.c.
2998 	 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2999 
3000 	 * lowest 3 bytes are remote control codes (no handshake needed)
3001 	 * xxxFFF: No remote control chip soldered
3002 	 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3003 	 * Note: Some bits are Audio_Mask !
3004 	 */
3005 	ttype = (gpio & 0x0f0000) >> 16;
3006 	switch (ttype) {
3007 	case 0x0:
3008 		tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3009 		break;
3010 	case 0x2:
3011 		tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3012 		break;
3013 	case 0x4:
3014 		tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3015 		break;
3016 	case 0x6:
3017 		tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3018 		break;
3019 	case 0xC:
3020 		tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3021 		break;
3022 	default:
3023 		pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3024 		break;
3025 	}
3026 
3027 	has_remote          =   gpio & 0x800000;
3028 	has_radio	    =   gpio & 0x400000;
3029 	/*   unknown                   0x200000;
3030 	 *   unknown2                  0x100000; */
3031 	is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3032 	has_tda9820_tda9821 = !(gpio & 0x004000);
3033 	is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3034 	/*
3035 	 * gpio & 0x001000    output bit for audio routing */
3036 
3037 	if (is_capture_only)
3038 		tuner_type = TUNER_ABSENT; /* No tuner present */
3039 
3040 	pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3041 		btv->c.nr, has_radio ? "yes" : "no",
3042 		has_remote ? "yes" : "no", tuner_type, gpio);
3043 	pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3044 		btv->c.nr, is_lr90 ? "yes" : "no",
3045 		has_tda9820_tda9821 ? "yes" : "no",
3046 		is_capture_only ? "yes" : "no");
3047 
3048 	if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3049 		btv->tuner_type = tuner_type;
3050 	btv->has_radio = has_radio;
3051 
3052 	/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3053 	 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3054 	 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3055 	if (has_tda9820_tda9821)
3056 		btv->audio_mode_gpio = lt9415_audio;
3057 	/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3058 }
3059 
3060 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3061 			       14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3062 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3063 			       1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3064 
miro_pinnacle_gpio(struct bttv * btv)3065 static void miro_pinnacle_gpio(struct bttv *btv)
3066 {
3067 	int id,msp,gpio;
3068 	char *info;
3069 
3070 	gpio_inout(0xffffff, 0);
3071 	gpio = gpio_read();
3072 	id   = ((gpio>>10) & 63) -1;
3073 	msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3074 	if (id < 32) {
3075 		btv->tuner_type = miro_tunermap[id];
3076 		if (0 == (gpio & 0x20)) {
3077 			btv->has_radio = 1;
3078 			if (!miro_fmtuner[id]) {
3079 				btv->has_tea575x = 1;
3080 				btv->tea_gpio.wren = 6;
3081 				btv->tea_gpio.most = 7;
3082 				btv->tea_gpio.clk  = 8;
3083 				btv->tea_gpio.data = 9;
3084 				tea575x_init(btv);
3085 			}
3086 		} else {
3087 			btv->has_radio = 0;
3088 		}
3089 		if (-1 != msp) {
3090 			if (btv->c.type == BTTV_BOARD_MIRO)
3091 				btv->c.type = BTTV_BOARD_MIROPRO;
3092 			if (btv->c.type == BTTV_BOARD_PINNACLE)
3093 				btv->c.type = BTTV_BOARD_PINNACLEPRO;
3094 		}
3095 		pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3096 			btv->c.nr, id+1, btv->tuner_type,
3097 			!btv->has_radio ? "no" :
3098 			(btv->has_tea575x ? "tea575x" : "fmtuner"),
3099 			(-1 == msp) ? "no" : "yes");
3100 	} else {
3101 		/* new cards with microtune tuner */
3102 		id = 63 - id;
3103 		btv->has_radio = 0;
3104 		switch (id) {
3105 		case 1:
3106 			info = "PAL / mono";
3107 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3108 			break;
3109 		case 2:
3110 			info = "PAL+SECAM / stereo";
3111 			btv->has_radio = 1;
3112 			btv->tda9887_conf = TDA9887_QSS;
3113 			break;
3114 		case 3:
3115 			info = "NTSC / stereo";
3116 			btv->has_radio = 1;
3117 			btv->tda9887_conf = TDA9887_QSS;
3118 			break;
3119 		case 4:
3120 			info = "PAL+SECAM / mono";
3121 			btv->tda9887_conf = TDA9887_QSS;
3122 			break;
3123 		case 5:
3124 			info = "NTSC / mono";
3125 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3126 			break;
3127 		case 6:
3128 			info = "NTSC / stereo";
3129 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3130 			break;
3131 		case 7:
3132 			info = "PAL / stereo";
3133 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3134 			break;
3135 		default:
3136 			info = "oops: unknown card";
3137 			break;
3138 		}
3139 		if (-1 != msp)
3140 			btv->c.type = BTTV_BOARD_PINNACLEPRO;
3141 		pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3142 			btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3143 		btv->tuner_type = TUNER_MT2032;
3144 	}
3145 }
3146 
3147 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3148 #define LM1882_SYNC_DRIVE     0x200000L
3149 
init_ids_eagle(struct bttv * btv)3150 static void init_ids_eagle(struct bttv *btv)
3151 {
3152 	gpio_inout(0xffffff,0xFFFF37);
3153 	gpio_write(0x200020);
3154 
3155 	/* flash strobe inverter ?! */
3156 	gpio_write(0x200024);
3157 
3158 	/* switch sync drive off */
3159 	gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3160 
3161 	/* set BT848 muxel to 2 */
3162 	btaor((2)<<5, ~(2<<5), BT848_IFORM);
3163 }
3164 
3165 /* Muxsel helper for the IDS Eagle.
3166  * the eagles does not use the standard muxsel-bits but
3167  * has its own multiplexer */
eagle_muxsel(struct bttv * btv,unsigned int input)3168 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3169 {
3170 	gpio_bits(3, input & 3);
3171 
3172 	/* composite */
3173 	/* set chroma ADC to sleep */
3174 	btor(BT848_ADC_C_SLEEP, BT848_ADC);
3175 	/* set to composite video */
3176 	btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3177 	btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3178 
3179 	/* switch sync drive off */
3180 	gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3181 }
3182 
gvc1100_muxsel(struct bttv * btv,unsigned int input)3183 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3184 {
3185 	static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3186 	gpio_write(masks[input%4]);
3187 }
3188 
3189 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3190    alarms output
3191 
3192    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3193    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3194 
3195    IN - sensor inputs, INx - sensor inputs and TI XORed together
3196    O1,O2,O3 - alarm outputs (relays)
3197 
3198    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3199 
3200 */
3201 
init_lmlbt4x(struct bttv * btv)3202 static void init_lmlbt4x(struct bttv *btv)
3203 {
3204 	pr_debug("LMLBT4x init\n");
3205 	btwrite(0x000000, BT848_GPIO_REG_INP);
3206 	gpio_inout(0xffffff, 0x0006C0);
3207 	gpio_write(0x000000);
3208 }
3209 
sigmaSQ_muxsel(struct bttv * btv,unsigned int input)3210 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3211 {
3212 	unsigned int inmux = input % 8;
3213 	gpio_inout( 0xf, 0xf );
3214 	gpio_bits( 0xf, inmux );
3215 }
3216 
sigmaSLC_muxsel(struct bttv * btv,unsigned int input)3217 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3218 {
3219 	unsigned int inmux = input % 4;
3220 	gpio_inout( 3<<9, 3<<9 );
3221 	gpio_bits( 3<<9, inmux<<9 );
3222 }
3223 
geovision_muxsel(struct bttv * btv,unsigned int input)3224 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3225 {
3226 	unsigned int inmux = input % 16;
3227 	gpio_inout(0xf, 0xf);
3228 	gpio_bits(0xf, inmux);
3229 }
3230 
3231 /*
3232  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3233  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3234  * The muxes are controlled via a 74HC373 latch which is connected to
3235  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3236  * Q0 of the latch is connected to the Enable (~E) input of the first
3237  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3238  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3239  */
3240 
td3116_latch_value(struct bttv * btv,u32 value)3241 static void td3116_latch_value(struct bttv *btv, u32 value)
3242 {
3243 	gpio_bits((1<<18) | 0xff, value);
3244 	gpio_bits((1<<18) | 0xff, (1<<18) | value);
3245 	udelay(1);
3246 	gpio_bits((1<<18) | 0xff, value);
3247 }
3248 
td3116_muxsel(struct bttv * btv,unsigned int input)3249 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3250 {
3251 	u32 value;
3252 	u32 highbit;
3253 
3254 	highbit = (input & 0x8) >> 3 ;
3255 
3256 	/* Disable outputs and set value in the mux */
3257 	value = 0x11; /* Disable outputs */
3258 	value |= ((input & 0x7) << 1)  << (4 * highbit);
3259 	td3116_latch_value(btv, value);
3260 
3261 	/* Enable the correct output */
3262 	value &= ~0x11;
3263 	value |= ((highbit ^ 0x1) << 4) | highbit;
3264 	td3116_latch_value(btv, value);
3265 }
3266 
3267 /* ----------------------------------------------------------------------- */
3268 
bttv_reset_audio(struct bttv * btv)3269 static void bttv_reset_audio(struct bttv *btv)
3270 {
3271 	/*
3272 	 * BT878A has a audio-reset register.
3273 	 * 1. This register is an audio reset function but it is in
3274 	 *    function-0 (video capture) address space.
3275 	 * 2. It is enough to do this once per power-up of the card.
3276 	 * 3. There is a typo in the Conexant doc -- it is not at
3277 	 *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3278 	 * --//Shrikumar 030609
3279 	 */
3280 	if (btv->id != 878)
3281 		return;
3282 
3283 	if (bttv_debug)
3284 		pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3285 	btwrite((1<<7), 0x058);
3286 	udelay(10);
3287 	btwrite(     0, 0x058);
3288 }
3289 
3290 /* initialization part one -- before registering i2c bus */
bttv_init_card1(struct bttv * btv)3291 void bttv_init_card1(struct bttv *btv)
3292 {
3293 	switch (btv->c.type) {
3294 	case BTTV_BOARD_HAUPPAUGE:
3295 	case BTTV_BOARD_HAUPPAUGE878:
3296 		boot_msp34xx(btv,5);
3297 		break;
3298 	case BTTV_BOARD_VOODOOTV_200:
3299 	case BTTV_BOARD_VOODOOTV_FM:
3300 		boot_msp34xx(btv,20);
3301 		break;
3302 	case BTTV_BOARD_AVERMEDIA98:
3303 		boot_msp34xx(btv,11);
3304 		break;
3305 	case BTTV_BOARD_HAUPPAUGEPVR:
3306 		pvr_boot(btv);
3307 		break;
3308 	case BTTV_BOARD_TWINHAN_DST:
3309 	case BTTV_BOARD_AVDVBT_771:
3310 	case BTTV_BOARD_PINNACLESAT:
3311 		btv->use_i2c_hw = 1;
3312 		break;
3313 	case BTTV_BOARD_ADLINK_RTV24:
3314 		init_RTV24( btv );
3315 		break;
3316 	case BTTV_BOARD_PCI_8604PW:
3317 		init_PCI8604PW(btv);
3318 		break;
3319 
3320 	}
3321 	if (!bttv_tvcards[btv->c.type].has_dvb)
3322 		bttv_reset_audio(btv);
3323 }
3324 
3325 /* initialization part two -- after registering i2c bus */
bttv_init_card2(struct bttv * btv)3326 void bttv_init_card2(struct bttv *btv)
3327 {
3328 	btv->tuner_type = UNSET;
3329 
3330 	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3331 		bttv_readee(btv,eeprom_data,0xa0);
3332 		identify_by_eeprom(btv,eeprom_data);
3333 	}
3334 
3335 	switch (btv->c.type) {
3336 	case BTTV_BOARD_MIRO:
3337 	case BTTV_BOARD_MIROPRO:
3338 	case BTTV_BOARD_PINNACLE:
3339 	case BTTV_BOARD_PINNACLEPRO:
3340 		/* miro/pinnacle */
3341 		miro_pinnacle_gpio(btv);
3342 		break;
3343 	case BTTV_BOARD_FLYVIDEO_98:
3344 	case BTTV_BOARD_MAXI:
3345 	case BTTV_BOARD_LIFE_FLYKIT:
3346 	case BTTV_BOARD_FLYVIDEO:
3347 	case BTTV_BOARD_TYPHOON_TVIEW:
3348 	case BTTV_BOARD_CHRONOS_VS2:
3349 	case BTTV_BOARD_FLYVIDEO_98FM:
3350 	case BTTV_BOARD_FLYVIDEO2000:
3351 	case BTTV_BOARD_FLYVIDEO98EZ:
3352 	case BTTV_BOARD_CONFERENCETV:
3353 	case BTTV_BOARD_LIFETEC_9415:
3354 		flyvideo_gpio(btv);
3355 		break;
3356 	case BTTV_BOARD_HAUPPAUGE:
3357 	case BTTV_BOARD_HAUPPAUGE878:
3358 	case BTTV_BOARD_HAUPPAUGEPVR:
3359 		/* pick up some config infos from the eeprom */
3360 		bttv_readee(btv,eeprom_data,0xa0);
3361 		hauppauge_eeprom(btv);
3362 		break;
3363 	case BTTV_BOARD_AVERMEDIA98:
3364 	case BTTV_BOARD_AVPHONE98:
3365 		bttv_readee(btv,eeprom_data,0xa0);
3366 		avermedia_eeprom(btv);
3367 		break;
3368 	case BTTV_BOARD_PXC200:
3369 		init_PXC200(btv);
3370 		break;
3371 	case BTTV_BOARD_PICOLO_TETRA_CHIP:
3372 		picolo_tetra_init(btv);
3373 		break;
3374 	case BTTV_BOARD_VHX:
3375 		btv->has_radio    = 1;
3376 		btv->has_tea575x  = 1;
3377 		btv->tea_gpio.wren = 5;
3378 		btv->tea_gpio.most = 6;
3379 		btv->tea_gpio.clk  = 3;
3380 		btv->tea_gpio.data = 4;
3381 		tea575x_init(btv);
3382 		break;
3383 	case BTTV_BOARD_VOBIS_BOOSTAR:
3384 	case BTTV_BOARD_TERRATV:
3385 		terratec_active_radio_upgrade(btv);
3386 		break;
3387 	case BTTV_BOARD_MAGICTVIEW061:
3388 		if (btv->cardid == 0x3002144f) {
3389 			btv->has_radio=1;
3390 			pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3391 				btv->c.nr);
3392 		}
3393 		break;
3394 	case BTTV_BOARD_STB2:
3395 		if (btv->cardid == 0x3060121a) {
3396 			/* Fix up entry for 3DFX VoodooTV 100,
3397 			   which is an OEM STB card variant. */
3398 			btv->has_radio=0;
3399 			btv->tuner_type=TUNER_TEMIC_NTSC;
3400 		}
3401 		break;
3402 	case BTTV_BOARD_OSPREY1x0:
3403 	case BTTV_BOARD_OSPREY1x0_848:
3404 	case BTTV_BOARD_OSPREY101_848:
3405 	case BTTV_BOARD_OSPREY1x1:
3406 	case BTTV_BOARD_OSPREY1x1_SVID:
3407 	case BTTV_BOARD_OSPREY2xx:
3408 	case BTTV_BOARD_OSPREY2x0_SVID:
3409 	case BTTV_BOARD_OSPREY2x0:
3410 	case BTTV_BOARD_OSPREY440:
3411 	case BTTV_BOARD_OSPREY500:
3412 	case BTTV_BOARD_OSPREY540:
3413 	case BTTV_BOARD_OSPREY2000:
3414 		bttv_readee(btv,eeprom_data,0xa0);
3415 		osprey_eeprom(btv, eeprom_data);
3416 		break;
3417 	case BTTV_BOARD_IDS_EAGLE:
3418 		init_ids_eagle(btv);
3419 		break;
3420 	case BTTV_BOARD_MODTEC_205:
3421 		bttv_readee(btv,eeprom_data,0xa0);
3422 		modtec_eeprom(btv);
3423 		break;
3424 	case BTTV_BOARD_LMLBT4:
3425 		init_lmlbt4x(btv);
3426 		break;
3427 	case BTTV_BOARD_TIBET_CS16:
3428 		tibetCS16_init(btv);
3429 		break;
3430 	case BTTV_BOARD_KODICOM_4400R:
3431 		kodicom4400r_init(btv);
3432 		break;
3433 	case BTTV_BOARD_GEOVISION_GV800S:
3434 		gv800s_init(btv);
3435 		break;
3436 	}
3437 
3438 	/* pll configuration */
3439 	if (!(btv->id==848 && btv->revision==0x11)) {
3440 		/* defaults from card list */
3441 		if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3442 			btv->pll.pll_ifreq=28636363;
3443 			btv->pll.pll_crystal=BT848_IFORM_XT0;
3444 		}
3445 		if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3446 			btv->pll.pll_ifreq=35468950;
3447 			btv->pll.pll_crystal=BT848_IFORM_XT1;
3448 		}
3449 		if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3450 			btv->pll.pll_ifreq = 14318181;
3451 			btv->pll.pll_crystal = BT848_IFORM_XT0;
3452 		}
3453 		/* insmod options can override */
3454 		switch (pll[btv->c.nr]) {
3455 		case 0: /* none */
3456 			btv->pll.pll_crystal = 0;
3457 			btv->pll.pll_ifreq   = 0;
3458 			btv->pll.pll_ofreq   = 0;
3459 			break;
3460 		case 1: /* 28 MHz */
3461 		case 28:
3462 			btv->pll.pll_ifreq   = 28636363;
3463 			btv->pll.pll_ofreq   = 0;
3464 			btv->pll.pll_crystal = BT848_IFORM_XT0;
3465 			break;
3466 		case 2: /* 35 MHz */
3467 		case 35:
3468 			btv->pll.pll_ifreq   = 35468950;
3469 			btv->pll.pll_ofreq   = 0;
3470 			btv->pll.pll_crystal = BT848_IFORM_XT1;
3471 			break;
3472 		case 3: /* 14 MHz */
3473 		case 14:
3474 			btv->pll.pll_ifreq   = 14318181;
3475 			btv->pll.pll_ofreq   = 0;
3476 			btv->pll.pll_crystal = BT848_IFORM_XT0;
3477 			break;
3478 		}
3479 	}
3480 	btv->pll.pll_current = -1;
3481 
3482 	/* tuner configuration (from card list / autodetect / insmod option) */
3483 	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3484 		if (UNSET == btv->tuner_type)
3485 			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3486 	if (UNSET != tuner[btv->c.nr])
3487 		btv->tuner_type = tuner[btv->c.nr];
3488 
3489 	if (btv->tuner_type == TUNER_ABSENT)
3490 		pr_info("%d: tuner absent\n", btv->c.nr);
3491 	else if (btv->tuner_type == UNSET)
3492 		pr_warn("%d: tuner type unset\n", btv->c.nr);
3493 	else
3494 		pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3495 
3496 	if (autoload != UNSET) {
3497 		pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3498 		pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3499 			btv->c.nr);
3500 	}
3501 
3502 	if (UNSET == btv->tuner_type)
3503 		btv->tuner_type = TUNER_ABSENT;
3504 
3505 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3506 		   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3507 	btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3508 		    UNSET : bttv_tvcards[btv->c.type].svhs;
3509 	if (svhs[btv->c.nr] != UNSET)
3510 		btv->svhs = svhs[btv->c.nr];
3511 	if (remote[btv->c.nr] != UNSET)
3512 		btv->has_remote = remote[btv->c.nr];
3513 
3514 	if (bttv_tvcards[btv->c.type].has_radio)
3515 		btv->has_radio = 1;
3516 	if (bttv_tvcards[btv->c.type].has_remote)
3517 		btv->has_remote = 1;
3518 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
3519 		btv->gpioirq = 1;
3520 	if (bttv_tvcards[btv->c.type].volume_gpio)
3521 		btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3522 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3523 		btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3524 
3525 	if (btv->tuner_type == TUNER_ABSENT)
3526 		return;  /* no tuner or related drivers to load */
3527 
3528 	if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3529 		/* Probe for RDS receiver chip */
3530 		static const unsigned short addrs[] = {
3531 			0x20 >> 1,
3532 			0x22 >> 1,
3533 			I2C_CLIENT_END
3534 		};
3535 		struct v4l2_subdev *sd;
3536 
3537 		sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3538 			&btv->c.i2c_adap, "saa6588", 0, addrs);
3539 		btv->has_saa6588 = (sd != NULL);
3540 	}
3541 
3542 	/* try to detect audio/fader chips */
3543 
3544 	/* First check if the user specified the audio chip via a module
3545 	   option. */
3546 
3547 	switch (audiodev[btv->c.nr]) {
3548 	case -1:
3549 		return;	/* do not load any audio module */
3550 
3551 	case 0: /* autodetect */
3552 		break;
3553 
3554 	case 1: {
3555 		/* The user specified that we should probe for msp3400 */
3556 		static const unsigned short addrs[] = {
3557 			I2C_ADDR_MSP3400 >> 1,
3558 			I2C_ADDR_MSP3400_ALT >> 1,
3559 			I2C_CLIENT_END
3560 		};
3561 
3562 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3563 			&btv->c.i2c_adap, "msp3400", 0, addrs);
3564 		if (btv->sd_msp34xx)
3565 			return;
3566 		goto no_audio;
3567 	}
3568 
3569 	case 2: {
3570 		/* The user specified that we should probe for tda7432 */
3571 		static const unsigned short addrs[] = {
3572 			I2C_ADDR_TDA7432 >> 1,
3573 			I2C_CLIENT_END
3574 		};
3575 
3576 		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3577 				&btv->c.i2c_adap, "tda7432", 0, addrs))
3578 			return;
3579 		goto no_audio;
3580 	}
3581 
3582 	case 3: {
3583 		/* The user specified that we should probe for tvaudio */
3584 		btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3585 			&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3586 		if (btv->sd_tvaudio)
3587 			return;
3588 		goto no_audio;
3589 	}
3590 
3591 	default:
3592 		pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3593 		return;
3594 	}
3595 
3596 	/* There were no overrides, so now we try to discover this through the
3597 	   card definition */
3598 
3599 	/* probe for msp3400 first: this driver can detect whether or not
3600 	   it really is a msp3400, so it will return NULL when the device
3601 	   found is really something else (e.g. a tea6300). */
3602 	if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3603 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3604 			&btv->c.i2c_adap, "msp3400",
3605 			0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3606 	} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3607 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3608 			&btv->c.i2c_adap, "msp3400",
3609 			0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3610 	}
3611 
3612 	/* If we found a msp34xx, then we're done. */
3613 	if (btv->sd_msp34xx)
3614 		return;
3615 
3616 	/* Now see if we can find one of the tvaudio devices. */
3617 	btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3618 		&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3619 	if (btv->sd_tvaudio) {
3620 		/* There may be two tvaudio chips on the card, so try to
3621 		   find another. */
3622 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3623 			&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3624 	}
3625 
3626 	/* it might also be a tda7432. */
3627 	if (!bttv_tvcards[btv->c.type].no_tda7432) {
3628 		static const unsigned short addrs[] = {
3629 			I2C_ADDR_TDA7432 >> 1,
3630 			I2C_CLIENT_END
3631 		};
3632 
3633 		btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3634 				&btv->c.i2c_adap, "tda7432", 0, addrs);
3635 		if (btv->sd_tda7432)
3636 			return;
3637 	}
3638 	if (btv->sd_tvaudio)
3639 		return;
3640 
3641 no_audio:
3642 	pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3643 }
3644 
3645 
3646 /* initialize the tuner */
bttv_init_tuner(struct bttv * btv)3647 void bttv_init_tuner(struct bttv *btv)
3648 {
3649 	int addr = ADDR_UNSET;
3650 
3651 	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3652 		addr = bttv_tvcards[btv->c.type].tuner_addr;
3653 
3654 	if (btv->tuner_type != TUNER_ABSENT) {
3655 		struct tuner_setup tun_setup;
3656 
3657 		/* Load tuner module before issuing tuner config call! */
3658 		if (btv->has_radio)
3659 			v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3660 				&btv->c.i2c_adap, "tuner",
3661 				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3662 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3663 				&btv->c.i2c_adap, "tuner",
3664 				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3665 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3666 				&btv->c.i2c_adap, "tuner",
3667 				0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3668 
3669 		tun_setup.mode_mask = T_ANALOG_TV;
3670 		tun_setup.type = btv->tuner_type;
3671 		tun_setup.addr = addr;
3672 
3673 		if (btv->has_radio)
3674 			tun_setup.mode_mask |= T_RADIO;
3675 
3676 		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3677 	}
3678 
3679 	if (btv->tda9887_conf) {
3680 		struct v4l2_priv_tun_config tda9887_cfg;
3681 
3682 		tda9887_cfg.tuner = TUNER_TDA9887;
3683 		tda9887_cfg.priv = &btv->tda9887_conf;
3684 
3685 		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3686 	}
3687 }
3688 
3689 /* ----------------------------------------------------------------------- */
3690 
modtec_eeprom(struct bttv * btv)3691 static void modtec_eeprom(struct bttv *btv)
3692 {
3693 	if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3694 		btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3695 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3696 			btv->c.nr, &eeprom_data[0x1e]);
3697 	} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3698 		btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3699 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3700 			btv->c.nr, &eeprom_data[0x1e]);
3701 	} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3702 		btv->tuner_type=TUNER_PHILIPS_NTSC;
3703 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3704 			btv->c.nr, &eeprom_data[0x1e]);
3705 	} else {
3706 		pr_info("%d: Modtec: Unknown TunerString: %s\n",
3707 			btv->c.nr, &eeprom_data[0x1e]);
3708 	}
3709 }
3710 
hauppauge_eeprom(struct bttv * btv)3711 static void hauppauge_eeprom(struct bttv *btv)
3712 {
3713 	struct tveeprom tv;
3714 
3715 	tveeprom_hauppauge_analog(&tv, eeprom_data);
3716 	btv->tuner_type = tv.tuner_type;
3717 	btv->has_radio  = tv.has_radio;
3718 
3719 	pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3720 		btv->c.nr, tv.model);
3721 
3722 	/*
3723 	 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3724 	 * type based on model #.
3725 	 */
3726 	if(tv.model == 64900) {
3727 		pr_info("%d: Switching board type from %s to %s\n",
3728 			btv->c.nr,
3729 			bttv_tvcards[btv->c.type].name,
3730 			bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3731 		btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3732 	}
3733 
3734 	/* The 61334 needs the msp3410 to do the radio demod to get sound */
3735 	if (tv.model == 61334)
3736 		btv->radio_uses_msp_demodulator = 1;
3737 }
3738 
3739 /* ----------------------------------------------------------------------- */
3740 
bttv_tea575x_set_pins(struct snd_tea575x * tea,u8 pins)3741 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3742 {
3743 	struct bttv *btv = tea->private_data;
3744 	struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3745 	u16 val = 0;
3746 
3747 	val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3748 	val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3749 	val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3750 
3751 	gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3752 	if (btv->mbox_ior) {
3753 		/* IOW and CSEL active */
3754 		gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3755 		udelay(5);
3756 		/* all inactive */
3757 		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3758 			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3759 	}
3760 }
3761 
bttv_tea575x_get_pins(struct snd_tea575x * tea)3762 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3763 {
3764 	struct bttv *btv = tea->private_data;
3765 	struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3766 	u8 ret = 0;
3767 	u16 val;
3768 
3769 	if (btv->mbox_ior) {
3770 		/* IOR and CSEL active */
3771 		gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3772 		udelay(5);
3773 	}
3774 	val = gpio_read();
3775 	if (btv->mbox_ior) {
3776 		/* all inactive */
3777 		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3778 			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3779 	}
3780 
3781 	if (val & (1 << gpio.data))
3782 		ret |= TEA575X_DATA;
3783 	if (val & (1 << gpio.most))
3784 		ret |= TEA575X_MOST;
3785 
3786 	return ret;
3787 }
3788 
bttv_tea575x_set_direction(struct snd_tea575x * tea,bool output)3789 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3790 {
3791 	struct bttv *btv = tea->private_data;
3792 	struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3793 	u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3794 		   (1 << gpio.most);
3795 
3796 	if (output)
3797 		gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3798 				 (1 << gpio.wren));
3799 	else
3800 		gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3801 }
3802 
3803 static const struct snd_tea575x_ops bttv_tea_ops = {
3804 	.set_pins = bttv_tea575x_set_pins,
3805 	.get_pins = bttv_tea575x_get_pins,
3806 	.set_direction = bttv_tea575x_set_direction,
3807 };
3808 
tea575x_init(struct bttv * btv)3809 static int tea575x_init(struct bttv *btv)
3810 {
3811 	btv->tea.private_data = btv;
3812 	btv->tea.ops = &bttv_tea_ops;
3813 	if (!snd_tea575x_hw_init(&btv->tea)) {
3814 		pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3815 		btv->tea.mute = false;
3816 		return 0;
3817 	}
3818 
3819 	btv->has_tea575x = 0;
3820 	btv->has_radio = 0;
3821 
3822 	return -ENODEV;
3823 }
3824 
3825 /* ----------------------------------------------------------------------- */
3826 
terratec_active_radio_upgrade(struct bttv * btv)3827 static int terratec_active_radio_upgrade(struct bttv *btv)
3828 {
3829 	btv->has_radio    = 1;
3830 	btv->has_tea575x  = 1;
3831 	btv->tea_gpio.wren = 4;
3832 	btv->tea_gpio.most = 5;
3833 	btv->tea_gpio.clk  = 3;
3834 	btv->tea_gpio.data = 2;
3835 
3836 	btv->mbox_iow     = 1 <<  8;
3837 	btv->mbox_ior     = 1 <<  9;
3838 	btv->mbox_csel    = 1 << 10;
3839 
3840 	if (!tea575x_init(btv)) {
3841 		pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3842 		btv->has_saa6588 = 1;
3843 	}
3844 
3845 	return 0;
3846 }
3847 
3848 
3849 /* ----------------------------------------------------------------------- */
3850 
3851 /*
3852  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3853  *
3854  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3855  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3856  * unpacked with unzip).
3857  */
3858 #define PVR_GPIO_DELAY		10
3859 
3860 #define BTTV_ALT_DATA		0x000001
3861 #define BTTV_ALT_DCLK		0x100000
3862 #define BTTV_ALT_NCONFIG	0x800000
3863 
pvr_altera_load(struct bttv * btv,const u8 * micro,u32 microlen)3864 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3865 {
3866 	u32 n;
3867 	u8 bits;
3868 	int i;
3869 
3870 	gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3871 	gpio_write(0);
3872 	udelay(PVR_GPIO_DELAY);
3873 
3874 	gpio_write(BTTV_ALT_NCONFIG);
3875 	udelay(PVR_GPIO_DELAY);
3876 
3877 	for (n = 0; n < microlen; n++) {
3878 		bits = micro[n];
3879 		for (i = 0 ; i < 8 ; i++) {
3880 			gpio_bits(BTTV_ALT_DCLK,0);
3881 			if (bits & 0x01)
3882 				gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3883 			else
3884 				gpio_bits(BTTV_ALT_DATA,0);
3885 			gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3886 			bits >>= 1;
3887 		}
3888 	}
3889 	gpio_bits(BTTV_ALT_DCLK,0);
3890 	udelay(PVR_GPIO_DELAY);
3891 
3892 	/* begin Altera init loop (Not necessary,but doesn't hurt) */
3893 	for (i = 0 ; i < 30 ; i++) {
3894 		gpio_bits(BTTV_ALT_DCLK,0);
3895 		gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3896 	}
3897 	gpio_bits(BTTV_ALT_DCLK,0);
3898 	return 0;
3899 }
3900 
pvr_boot(struct bttv * btv)3901 static int pvr_boot(struct bttv *btv)
3902 {
3903 	const struct firmware *fw_entry;
3904 	int rc;
3905 
3906 	rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3907 	if (rc != 0) {
3908 		pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3909 		return rc;
3910 	}
3911 	rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3912 	pr_info("%d: altera firmware upload %s\n",
3913 		btv->c.nr, (rc < 0) ? "failed" : "ok");
3914 	release_firmware(fw_entry);
3915 	return rc;
3916 }
3917 
3918 /* ----------------------------------------------------------------------- */
3919 /* some osprey specific stuff                                              */
3920 
osprey_eeprom(struct bttv * btv,const u8 ee[256])3921 static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3922 {
3923 	int i;
3924 	u32 serial = 0;
3925 	int cardid = -1;
3926 
3927 	/* This code will never actually get called in this case.... */
3928 	if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3929 		/* this might be an antique... check for MMAC label in eeprom */
3930 		if (!strncmp(ee, "MMAC", 4)) {
3931 			u8 checksum = 0;
3932 			for (i = 0; i < 21; i++)
3933 				checksum += ee[i];
3934 			if (checksum != ee[21])
3935 				return;
3936 			cardid = BTTV_BOARD_OSPREY1x0_848;
3937 			for (i = 12; i < 21; i++) {
3938 				serial *= 10;
3939 				serial += ee[i] - '0';
3940 			}
3941 		}
3942 	} else {
3943 		unsigned short type;
3944 
3945 		for (i = 4 * 16; i < 8 * 16; i += 16) {
3946 			u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3947 
3948 			if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3949 				break;
3950 		}
3951 		if (i >= 8*16)
3952 			return;
3953 		ee += i;
3954 
3955 		/* found a valid descriptor */
3956 		type = get_unaligned_be16((__be16 *)(ee+4));
3957 
3958 		switch(type) {
3959 		/* 848 based */
3960 		case 0x0004:
3961 			cardid = BTTV_BOARD_OSPREY1x0_848;
3962 			break;
3963 		case 0x0005:
3964 			cardid = BTTV_BOARD_OSPREY101_848;
3965 			break;
3966 
3967 		/* 878 based */
3968 		case 0x0012:
3969 		case 0x0013:
3970 			cardid = BTTV_BOARD_OSPREY1x0;
3971 			break;
3972 		case 0x0014:
3973 		case 0x0015:
3974 			cardid = BTTV_BOARD_OSPREY1x1;
3975 			break;
3976 		case 0x0016:
3977 		case 0x0017:
3978 		case 0x0020:
3979 			cardid = BTTV_BOARD_OSPREY1x1_SVID;
3980 			break;
3981 		case 0x0018:
3982 		case 0x0019:
3983 		case 0x001E:
3984 		case 0x001F:
3985 			cardid = BTTV_BOARD_OSPREY2xx;
3986 			break;
3987 		case 0x001A:
3988 		case 0x001B:
3989 			cardid = BTTV_BOARD_OSPREY2x0_SVID;
3990 			break;
3991 		case 0x0040:
3992 			cardid = BTTV_BOARD_OSPREY500;
3993 			break;
3994 		case 0x0050:
3995 		case 0x0056:
3996 			cardid = BTTV_BOARD_OSPREY540;
3997 			/* bttv_osprey_540_init(btv); */
3998 			break;
3999 		case 0x0060:
4000 		case 0x0070:
4001 		case 0x00A0:
4002 			cardid = BTTV_BOARD_OSPREY2x0;
4003 			/* enable output on select control lines */
4004 			gpio_inout(0xffffff,0x000303);
4005 			break;
4006 		case 0x00D8:
4007 			cardid = BTTV_BOARD_OSPREY440;
4008 			break;
4009 		default:
4010 			/* unknown...leave generic, but get serial # */
4011 			pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4012 				btv->c.nr, type);
4013 			break;
4014 		}
4015 		serial = get_unaligned_be32((__be32 *)(ee+6));
4016 	}
4017 
4018 	pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4019 		btv->c.nr, cardid,
4020 		cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4021 
4022 	if (cardid<0 || btv->c.type == cardid)
4023 		return;
4024 
4025 	/* card type isn't set correctly */
4026 	if (card[btv->c.nr] < bttv_num_tvcards) {
4027 		pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4028 			btv->c.nr);
4029 	} else {
4030 		pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4031 			btv->c.nr, btv->c.type, cardid);
4032 		btv->c.type = cardid;
4033 	}
4034 }
4035 
4036 /* ----------------------------------------------------------------------- */
4037 /* AVermedia specific stuff, from  bktr_card.c                             */
4038 
4039 static int tuner_0_table[] = {
4040 	TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4041 	TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4042 	TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4043 	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4044 	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4045 	TUNER_PHILIPS_FM1216ME_MK3 };
4046 
4047 static int tuner_1_table[] = {
4048 	TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4049 	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4050 	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4051 	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4052 	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4053 
avermedia_eeprom(struct bttv * btv)4054 static void avermedia_eeprom(struct bttv *btv)
4055 {
4056 	int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4057 
4058 	tuner_make      = (eeprom_data[0x41] & 0x7);
4059 	tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4060 	tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4061 	btv->has_remote = (eeprom_data[0x42] & 0x01);
4062 
4063 	if (tuner_make == 0 || tuner_make == 2)
4064 		if (tuner_format <= 0x0a)
4065 			tuner_type = tuner_0_table[tuner_format];
4066 	if (tuner_make == 1)
4067 		if (tuner_format <= 9)
4068 			tuner_type = tuner_1_table[tuner_format];
4069 
4070 	if (tuner_make == 4)
4071 		if (tuner_format == 0x09)
4072 			tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4073 
4074 	pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4075 		btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4076 	if (tuner_type) {
4077 		btv->tuner_type = tuner_type;
4078 		pr_cont("%d", tuner_type);
4079 	} else
4080 		pr_cont("Unknown type");
4081 	pr_cont(" radio:%s remote control:%s\n",
4082 	       tuner_tv_fm     ? "yes" : "no",
4083 	       btv->has_remote ? "yes" : "no");
4084 }
4085 
4086 /*
4087  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
4088  * analog demod, which is not I2C controlled like the newer and more common
4089  * TDA9887 series.  Instead it has two tri-state input pins, S0 and S1,
4090  * that control the IF for the video and audio.  Apparently, bttv GPIO
4091  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4092  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4093  */
bttv_tda9880_setnorm(struct bttv * btv,u32 gpiobits)4094 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4095 {
4096 
4097 	if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
4098 		if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4099 			gpiobits |= 0x10000;
4100 		else
4101 			gpiobits &= ~0x10000;
4102 	}
4103 
4104 	gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4105 	return gpiobits;
4106 }
4107 
4108 
4109 /*
4110  * reset/enable the MSP on some Hauppauge cards
4111  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4112  *
4113  * Hauppauge:  pin  5
4114  * Voodoo:     pin 20
4115  */
boot_msp34xx(struct bttv * btv,int pin)4116 static void boot_msp34xx(struct bttv *btv, int pin)
4117 {
4118 	int mask = (1 << pin);
4119 
4120 	gpio_inout(mask,mask);
4121 	gpio_bits(mask,0);
4122 	mdelay(2);
4123 	udelay(500);
4124 	gpio_bits(mask,mask);
4125 
4126 	if (bttv_gpio)
4127 		bttv_gpio_tracking(btv,"msp34xx");
4128 	if (bttv_verbose)
4129 		pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4130 			btv->c.nr, pin);
4131 }
4132 
4133 /* ----------------------------------------------------------------------- */
4134 /*  Imagenation L-Model PXC200 Framegrabber */
4135 /*  This is basically the same procedure as
4136  *  used by Alessandro Rubini in his pxc200
4137  *  driver, but using BTTV functions */
4138 
init_PXC200(struct bttv * btv)4139 static void init_PXC200(struct bttv *btv)
4140 {
4141 	static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
4142 			      0x03, 0x04, 0x05, 0x06, 0x00 };
4143 	unsigned int i;
4144 	int tmp;
4145 	u32 val;
4146 
4147 	/* Initialise GPIO-connected stuff */
4148 	gpio_inout(0xffffff, (1<<13));
4149 	gpio_write(0);
4150 	udelay(3);
4151 	gpio_write(1<<13);
4152 	/* GPIO inputs are pulled up, so no need to drive
4153 	 * reset pin any longer */
4154 	gpio_bits(0xffffff, 0);
4155 	if (bttv_gpio)
4156 		bttv_gpio_tracking(btv,"pxc200");
4157 
4158 	/*  we could/should try and reset/control the AD pots? but
4159 	    right now  we simply  turned off the crushing.  Without
4160 	    this the AGC drifts drifts
4161 	    remember the EN is reverse logic -->
4162 	    setting BT848_ADC_AGC_EN disable the AGC
4163 	    tboult@eecs.lehigh.edu
4164 	*/
4165 
4166 	btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4167 
4168 	/*	Initialise MAX517 DAC */
4169 	pr_info("Setting DAC reference voltage level ...\n");
4170 	bttv_I2CWrite(btv,0x5E,0,0x80,1);
4171 
4172 	/*	Initialise 12C508 PIC */
4173 	/*	The I2CWrite and I2CRead commands are actually to the
4174 	 *	same chips - but the R/W bit is included in the address
4175 	 *	argument so the numbers are different */
4176 
4177 
4178 	pr_info("Initialising 12C508 PIC chip ...\n");
4179 
4180 	/* First of all, enable the clock line. This is used in the PXC200-F */
4181 	val = btread(BT848_GPIO_DMA_CTL);
4182 	val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4183 	btwrite(val, BT848_GPIO_DMA_CTL);
4184 
4185 	/* Then, push to 0 the reset pin long enough to reset the *
4186 	 * device same as above for the reset line, but not the same
4187 	 * value sent to the GPIO-connected stuff
4188 	 * which one is the good one? */
4189 	gpio_inout(0xffffff,(1<<2));
4190 	gpio_write(0);
4191 	udelay(10);
4192 	gpio_write(1<<2);
4193 
4194 	for (i = 0; i < ARRAY_SIZE(vals); i++) {
4195 		tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4196 		if (tmp != -1) {
4197 			pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4198 			       vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4199 		}
4200 	}
4201 
4202 	pr_info("PXC200 Initialised\n");
4203 }
4204 
4205 
4206 
4207 /* ----------------------------------------------------------------------- */
4208 /*
4209  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4210  *  it. This apparently involves the following procedure for each 878 chip:
4211  *
4212  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4213  *
4214  *  2)  write to GPIO_DATA
4215  *      - 0x0E
4216  *      - sleep 1ms
4217  *      - 0x10 + 0x0E
4218  *      - sleep 10ms
4219  *      - 0x0E
4220  *     read from GPIO_DATA into buf (uint_32)
4221  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4222  *                 error. ERROR_CPLD_Check_Failed stop.
4223  *
4224  *  3) write to GPIO_DATA
4225  *      - write 0x4400 + 0x0E
4226  *      - sleep 10ms
4227  *      - write 0x4410 + 0x0E
4228  *      - sleep 1ms
4229  *      - write 0x0E
4230  *     read from GPIO_DATA into buf (uint_32)
4231  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4232  *                error. ERROR_CPLD_Check_Failed.
4233  */
4234 /* ----------------------------------------------------------------------- */
4235 static void
init_RTV24(struct bttv * btv)4236 init_RTV24 (struct bttv *btv)
4237 {
4238 	uint32_t dataRead = 0;
4239 	long watchdog_value = 0x0E;
4240 
4241 	pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4242 		btv->c.nr);
4243 
4244 	btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4245 
4246 	btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4247 	msleep (1);
4248 	btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4249 	msleep (10);
4250 	btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4251 
4252 	dataRead = btread (BT848_GPIO_DATA);
4253 
4254 	if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4255 		pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4256 			btv->c.nr, dataRead);
4257 	}
4258 
4259 	btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4260 	msleep (10);
4261 	btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4262 	msleep (1);
4263 	btwrite (watchdog_value, BT848_GPIO_DATA);
4264 	msleep (1);
4265 	dataRead = btread (BT848_GPIO_DATA);
4266 
4267 	if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4268 		pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4269 			btv->c.nr, dataRead);
4270 
4271 		return;
4272 	}
4273 
4274 	pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4275 }
4276 
4277 
4278 
4279 /* ----------------------------------------------------------------------- */
4280 /*
4281  *  The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
4282  *  the PCI REQ signals coming from the four BT878 chips. After power
4283  *  up, the CPLD does not forward requests to the bus, which prevents
4284  *  the BT878 from fetching RISC instructions from memory. While the
4285  *  CPLD is connected to most of the GPIOs of PCI device 0xD, only
4286  *  five appear to play a role in unlocking the REQ signal. The following
4287  *  sequence has been determined by trial and error without access to the
4288  *  original driver.
4289  *
4290  *  Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
4291  *  Devices 0xE and 0xF do not appear to have anything connected to their
4292  *  GPIOs.
4293  *
4294  *  The correct GPIO_OUT_EN value might have some more bits set. It should
4295  *  be possible to derive it from a boundary scan of the CPLD. Its JTAG
4296  *  pins are routed to test points.
4297  *
4298  */
4299 /* ----------------------------------------------------------------------- */
4300 static void
init_PCI8604PW(struct bttv * btv)4301 init_PCI8604PW(struct bttv *btv)
4302 {
4303 	int state;
4304 
4305 	if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
4306 		pr_warn("This is not a PCI-8604PW\n");
4307 		return;
4308 	}
4309 
4310 	if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
4311 		return;
4312 
4313 	btwrite(0x080002, BT848_GPIO_OUT_EN);
4314 
4315 	state = (btread(BT848_GPIO_DATA) >> 21) & 7;
4316 
4317 	for (;;) {
4318 		switch (state) {
4319 		case 1:
4320 		case 5:
4321 		case 6:
4322 		case 4:
4323 			pr_debug("PCI-8604PW in state %i, toggling pin\n",
4324 				 state);
4325 			btwrite(0x080000, BT848_GPIO_DATA);
4326 			msleep(1);
4327 			btwrite(0x000000, BT848_GPIO_DATA);
4328 			msleep(1);
4329 			break;
4330 		case 7:
4331 			pr_info("PCI-8604PW unlocked\n");
4332 			return;
4333 		case 0:
4334 			/* FIXME: If we are in state 7 and toggle GPIO[19] one
4335 			   more time, the CPLD goes into state 0, where PCI bus
4336 			   mastering is inhibited again. We have not managed to
4337 			   get out of that state. */
4338 
4339 			pr_err("PCI-8604PW locked until reset\n");
4340 			return;
4341 		default:
4342 			pr_err("PCI-8604PW in unknown state %i\n", state);
4343 			return;
4344 		}
4345 
4346 		state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
4347 
4348 		switch (state) {
4349 		case 0x15:
4350 		case 0x56:
4351 		case 0x64:
4352 		case 0x47:
4353 		/* The transition from state 7 to state 0 is, as explained
4354 		   above, valid but undesired and with this code impossible
4355 		   as we exit as soon as we are in state 7.
4356 		case 0x70: */
4357 			break;
4358 		default:
4359 			pr_err("PCI-8604PW invalid transition %i -> %i\n",
4360 			       state >> 4, state & 7);
4361 			return;
4362 		}
4363 		state &= 7;
4364 	}
4365 }
4366 
4367 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4368  *
4369  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4370  * switch instead (CD22M3494E). This IC can have multiple active connections
4371  * between Xn (input) and Yn (output) pins. We need to clear any existing
4372  * connection prior to establish a new one, pulsing the STROBE pin.
4373  *
4374  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4375  * GPIO pins are wired as:
4376  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4377  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4378  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4379  *  GPIO[8]   -                  - P3[5] (microcontroller)
4380  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4381  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4382  *  GPINTR    -                  - P3[4] (microcontroller)
4383  *
4384  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4385  * configuration either directly (as we are doing) or using the microcontroller
4386  * which is also wired to I2C interface. I have no further info on the
4387  * microcontroller features, one would need to disassembly the firmware.
4388  * note: the vendor refused to give any information on this product, all
4389  *       that stuff was found using a multimeter! :)
4390  */
rv605_muxsel(struct bttv * btv,unsigned int input)4391 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4392 {
4393 	static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4394 				      0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4395 
4396 	gpio_bits(0x07f, muxgpio[input]);
4397 
4398 	/* reset all connections */
4399 	gpio_bits(0x200,0x200);
4400 	mdelay(1);
4401 	gpio_bits(0x200,0x000);
4402 	mdelay(1);
4403 
4404 	/* create a new connection */
4405 	gpio_bits(0x480,0x480);
4406 	mdelay(1);
4407 	gpio_bits(0x480,0x080);
4408 	mdelay(1);
4409 }
4410 
4411 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4412  *
4413  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4414  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4415  * chips, ten eight input analog multiplexors, a not chip and a few
4416  * other components.
4417  *
4418  * 16 inputs on a secondary bracket are provided and can be selected
4419  * from each of the four capture chips.  Two of the eight input
4420  * multiplexors are used to select from any of the 16 input signals.
4421  *
4422  * Unsupported hardware capabilities:
4423  *  . A video output monitor on the secondary bracket can be selected from
4424  *    one of the 878A chips.
4425  *  . Another passthrough but I haven't spent any time investigating it.
4426  *  . Digital I/O (logic level connected to GPIO) is available from an
4427  *    onboard header.
4428  *
4429  * The on chip input mux should always be set to 2.
4430  * GPIO[16:19] - Video input selection
4431  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4432  * GPIO[?:?]   - Digital I/O.
4433  *
4434  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4435  * determined what function (if any) it provides.  With the microcontroller
4436  * and sync separator chips a guess is that it might have to do with video
4437  * switching and maybe some digital I/O.
4438  */
tibetCS16_muxsel(struct bttv * btv,unsigned int input)4439 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4440 {
4441 	/* video mux */
4442 	gpio_bits(0x0f0000, input << 16);
4443 }
4444 
tibetCS16_init(struct bttv * btv)4445 static void tibetCS16_init(struct bttv *btv)
4446 {
4447 	/* enable gpio bits, mask obtained via btSpy */
4448 	gpio_inout(0xffffff, 0x0f7fff);
4449 	gpio_write(0x0f7fff);
4450 }
4451 
4452 /*
4453  * The following routines for the Kodicom-4400r get a little mind-twisting.
4454  * There is a "master" controller and three "slave" controllers, together
4455  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4456  * The analog switch is controlled by the "master", but the detection order
4457  * of the four BT878A chips is in an order which I just don't understand.
4458  * The "master" is actually the second controller to be detected.  The
4459  * logic on the board uses logical numbers for the 4 controllers, but
4460  * those numbers are different from the detection sequence.  When working
4461  * with the analog switch, we need to "map" from the detection sequence
4462  * over to the board's logical controller number.  This mapping sequence
4463  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4464  * unit 3, the second (which is the master) is logical unit 0, etc.
4465  * We need to maintain the status of the analog switch (which of the 16
4466  * cameras is connected to which of the 4 controllers) in sw_status array.
4467  */
4468 
4469 /*
4470  * First a routine to set the analog switch, which controls which camera
4471  * is routed to which controller.  The switch comprises an X-address
4472  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4473  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4474  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4475  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4476  * specified address.  The idea is to set the address and data, then bring
4477  * STROBE high, and finally bring STROBE back to low.
4478  */
kodicom4400r_write(struct bttv * btv,unsigned char xaddr,unsigned char yaddr,unsigned char data)4479 static void kodicom4400r_write(struct bttv *btv,
4480 			       unsigned char xaddr,
4481 			       unsigned char yaddr,
4482 			       unsigned char data) {
4483 	unsigned int udata;
4484 
4485 	udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4486 	gpio_bits(0x1ff, udata);		/* write ADDR and DAT */
4487 	gpio_bits(0x1ff, udata | (1 << 8));	/* strobe high */
4488 	gpio_bits(0x1ff, udata);		/* strobe low */
4489 }
4490 
4491 /*
4492  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4493  * use this routine.  The routine finds the "master" for the card, maps
4494  * the controller number from the detected position over to the logical
4495  * number, writes the appropriate data to the analog switch, and housekeeps
4496  * the local copy of the switch information.  The parameter 'input' is the
4497  * requested camera number (0 - 15).
4498  */
kodicom4400r_muxsel(struct bttv * btv,unsigned int input)4499 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4500 {
4501 	int xaddr, yaddr;
4502 	struct bttv *mctlr;
4503 	static unsigned char map[4] = {3, 0, 2, 1};
4504 
4505 	mctlr = master[btv->c.nr];
4506 	if (mctlr == NULL) {	/* ignore if master not yet detected */
4507 		return;
4508 	}
4509 	yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4510 	yaddr = map[yaddr];
4511 	xaddr = input & 0xf;
4512 	/* Check if the controller/camera pair has changed, else ignore */
4513 	if (mctlr->sw_status[yaddr] != xaddr)
4514 	{
4515 		/* "open" the old switch, "close" the new one, save the new */
4516 		kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4517 		mctlr->sw_status[yaddr] = xaddr;
4518 		kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4519 	}
4520 }
4521 
4522 /*
4523  * During initialisation, we need to reset the analog switch.  We
4524  * also preset the switch to map the 4 connectors on the card to the
4525  * *user's* (see above description of kodicom4400r_muxsel) channels
4526  * 0 through 3
4527  */
kodicom4400r_init(struct bttv * btv)4528 static void kodicom4400r_init(struct bttv *btv)
4529 {
4530 	int ix;
4531 
4532 	gpio_inout(0x0003ff, 0x0003ff);
4533 	gpio_write(1 << 9);	/* reset MUX */
4534 	gpio_write(0);
4535 	/* Preset camera 0 to the 4 controllers */
4536 	for (ix = 0; ix < 4; ix++) {
4537 		btv->sw_status[ix] = ix;
4538 		kodicom4400r_write(btv, ix, ix, 1);
4539 	}
4540 	/*
4541 	 * Since this is the "master", we need to set up the
4542 	 * other three controller chips' pointers to this structure
4543 	 * for later use in the muxsel routine.
4544 	 */
4545 	if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4546 	    return;
4547 	master[btv->c.nr-1] = btv;
4548 	master[btv->c.nr]   = btv;
4549 	master[btv->c.nr+1] = btv;
4550 	master[btv->c.nr+2] = btv;
4551 }
4552 
4553 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4554  * video multiplexers to provide up to 16 video inputs. These
4555  * multiplexers are controlled by the lower 8 GPIO pins of the
4556  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4557 
4558  * xxx0 is pin xxx of multiplexer U5,
4559  * yyy1 is pin yyy of multiplexer U2
4560  */
4561 #define ENA0    0x01
4562 #define ENB0    0x02
4563 #define ENA1    0x04
4564 #define ENB1    0x08
4565 
4566 #define IN10    0x10
4567 #define IN00    0x20
4568 #define IN11    0x40
4569 #define IN01    0x80
4570 
xguard_muxsel(struct bttv * btv,unsigned int input)4571 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4572 {
4573 	static const int masks[] = {
4574 		ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4575 		ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4576 		ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4577 		ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4578 	};
4579 	gpio_write(masks[input%16]);
4580 }
picolo_tetra_init(struct bttv * btv)4581 static void picolo_tetra_init(struct bttv *btv)
4582 {
4583 	/*This is the video input redirection functionality : I DID NOT USE IT. */
4584 	btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4585 	btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4586 }
picolo_tetra_muxsel(struct bttv * btv,unsigned int input)4587 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4588 {
4589 
4590 	dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4591 	/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4592 	/*GPIO[20]&GPIO[21] used to choose the right input*/
4593 	btwrite (input<<20,BT848_GPIO_DATA);
4594 
4595 }
4596 
4597 /*
4598  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4599  *
4600  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4601  * switchers to provide 16 channels to MUX0. The TDA8540's have
4602  * 4 independent outputs and as such the IVC120G also has the
4603  * optional "Monitor Out" bus. This allows the card to be looking
4604  * at one input while the monitor is looking at another.
4605  *
4606  * Since I've couldn't be bothered figuring out how to add an
4607  * independent muxsel for the monitor bus, I've just set it to
4608  * whatever the card is looking at.
4609  *
4610  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4611  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4612  *
4613  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4614  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4615  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4616  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4617  *
4618  */
4619 
4620 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4621 #define I2C_TDA8540        0x90
4622 #define I2C_TDA8540_ALT1   0x92
4623 #define I2C_TDA8540_ALT2   0x94
4624 #define I2C_TDA8540_ALT3   0x96
4625 #define I2C_TDA8540_ALT4   0x98
4626 #define I2C_TDA8540_ALT5   0x9a
4627 #define I2C_TDA8540_ALT6   0x9c
4628 
ivc120_muxsel(struct bttv * btv,unsigned int input)4629 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4630 {
4631 	/* Simple maths */
4632 	int key = input % 4;
4633 	int matrix = input / 4;
4634 
4635 	dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4636 		btv->c.nr, input, matrix, key);
4637 
4638 	/* Handles the input selection on the TDA8540's */
4639 	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4640 		      ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4641 	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4642 		      ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4643 	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4644 		      ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4645 	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4646 		      ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4647 
4648 	/* Handles the output enables on the TDA8540's */
4649 	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4650 		      ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4651 	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4652 		      ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4653 	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4654 		      ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4655 	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4656 		      ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4657 
4658 	/* 878's MUX0 is already selected for input via muxsel values */
4659 }
4660 
4661 
4662 /* PXC200 muxsel helper
4663  * luke@syseng.anu.edu.au
4664  * another transplant
4665  * from Alessandro Rubini (rubini@linux.it)
4666  *
4667  * There are 4 kinds of cards:
4668  * PXC200L which is bt848
4669  * PXC200F which is bt848 with PIC controlling mux
4670  * PXC200AL which is bt878
4671  * PXC200AF which is bt878 with PIC controlling mux
4672  */
4673 #define PX_CFG_PXC200F 0x01
4674 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4675 #define PX_I2C_PIC       0x0f
4676 #define PX_PXC200A_CARDID 0x200a1295
4677 #define PX_I2C_CMD_CFG   0x00
4678 
PXC200_muxsel(struct bttv * btv,unsigned int input)4679 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4680 {
4681 	int rc;
4682 	long mux;
4683 	int bitmask;
4684 	unsigned char buf[2];
4685 
4686 	/* Read PIC config to determine if this is a PXC200F */
4687 	/* PX_I2C_CMD_CFG*/
4688 	buf[0]=0;
4689 	buf[1]=0;
4690 	rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4691 	if (rc) {
4692 		pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4693 			 btv->c.nr, rc);
4694 	  /* not PXC ? do nothing */
4695 		return;
4696 	}
4697 
4698 	rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4699 	if (!(rc & PX_CFG_PXC200F)) {
4700 		pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4701 			 btv->c.nr, rc);
4702 		return;
4703 	}
4704 
4705 
4706 	/* The multiplexer in the 200F is handled by the GPIO port */
4707 	/* get correct mapping between inputs  */
4708 	/*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4709 	/* ** not needed!?   */
4710 	mux = input;
4711 
4712 	/* make sure output pins are enabled */
4713 	/* bitmask=0x30f; */
4714 	bitmask=0x302;
4715 	/* check whether we have a PXC200A */
4716 	if (btv->cardid == PX_PXC200A_CARDID)  {
4717 	   bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4718 	   bitmask |= 7<<4; /* the DAC */
4719 	}
4720 	btwrite(bitmask, BT848_GPIO_OUT_EN);
4721 
4722 	bitmask = btread(BT848_GPIO_DATA);
4723 	if (btv->cardid == PX_PXC200A_CARDID)
4724 	  bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4725 	else /* older device */
4726 	  bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4727 	btwrite(bitmask,BT848_GPIO_DATA);
4728 
4729 	/*
4730 	 * Was "to be safe, set the bt848 to input 0"
4731 	 * Actually, since it's ok at load time, better not messing
4732 	 * with these bits (on PXC200AF you need to set mux 2 here)
4733 	 *
4734 	 * needed because bttv-driver sets mux before calling this function
4735 	 */
4736 	if (btv->cardid == PX_PXC200A_CARDID)
4737 	  btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4738 	else /* older device */
4739 	  btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4740 
4741 	pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4742 }
4743 
phytec_muxsel(struct bttv * btv,unsigned int input)4744 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4745 {
4746 	unsigned int mux = input % 4;
4747 
4748 	if (input == btv->svhs)
4749 		mux = 0;
4750 
4751 	gpio_bits(0x3, mux);
4752 }
4753 
4754 /*
4755  * GeoVision GV-800(S) functions
4756  * Bruno Christo <bchristo@inf.ufsm.br>
4757 */
4758 
4759 /* This is a function to control the analog switch, which determines which
4760  * camera is routed to which controller.  The switch comprises an X-address
4761  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4762  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4763  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4764  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4765  * specified address. There is also a chip select (gpio bit 16).
4766  * The idea is to set the address and chip select together, bring
4767  * STROBE high, write the data, and finally bring STROBE back to low.
4768  */
gv800s_write(struct bttv * btv,unsigned char xaddr,unsigned char yaddr,unsigned char data)4769 static void gv800s_write(struct bttv *btv,
4770 			 unsigned char xaddr,
4771 			 unsigned char yaddr,
4772 			 unsigned char data) {
4773 	/* On the "master" 878A:
4774 	* GPIO bits 0-9 are used for the analog switch:
4775 	*   00 - 03:	camera selector
4776 	*   04 - 06:	878A (controller) selector
4777 	*   16:		cselect
4778 	*   17:		strobe
4779 	*   18:		data (1->on, 0->off)
4780 	*   19:		reset
4781 	*/
4782 	const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4783 	const u32 CSELECT = 1<<16;
4784 	const u32 STROBE = 1<<17;
4785 	const u32 DATA = data<<18;
4786 
4787 	gpio_bits(0x1007f, ADDRESS | CSELECT);	/* write ADDRESS and CSELECT */
4788 	gpio_bits(0x20000, STROBE);		/* STROBE high */
4789 	gpio_bits(0x40000, DATA);		/* write DATA */
4790 	gpio_bits(0x20000, ~STROBE);		/* STROBE low */
4791 }
4792 
4793 /*
4794  * GeoVision GV-800(S) muxsel
4795  *
4796  * Each of the 4 cards (controllers) use this function.
4797  * The controller using this function selects the input through the GPIO pins
4798  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4799  *
4800  * The parameter 'input' is the requested camera number (0-4) on the controller.
4801  * The map array has the address of each input. Note that the addresses in the
4802  * array are in the sequence the original GeoVision driver uses, that is, set
4803  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4804  * the physical "camera 1" connector corresponds to controller 0 input 0,
4805  * "camera 2" corresponds to controller 1 input 0, and so on.
4806  *
4807  * After getting the input address, the function then writes the appropriate
4808  * data to the analog switch, and housekeeps the local copy of the switch
4809  * information.
4810  */
gv800s_muxsel(struct bttv * btv,unsigned int input)4811 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4812 {
4813 	struct bttv *mctlr;
4814 	int xaddr, yaddr;
4815 	static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4816 					  { 0x1, 0x5, 0xb, 0x7 },
4817 					  { 0x2, 0x8, 0xc, 0xe },
4818 					  { 0x3, 0x9, 0xd, 0xf } };
4819 	input = input%4;
4820 	mctlr = master[btv->c.nr];
4821 	if (mctlr == NULL) {
4822 		/* do nothing until the "master" is detected */
4823 		return;
4824 	}
4825 	yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4826 	xaddr = map[yaddr][input] & 0xf;
4827 
4828 	/* Check if the controller/camera pair has changed, ignore otherwise */
4829 	if (mctlr->sw_status[yaddr] != xaddr) {
4830 		/* disable the old switch, enable the new one and save status */
4831 		gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4832 		mctlr->sw_status[yaddr] = xaddr;
4833 		gv800s_write(mctlr, xaddr, yaddr, 1);
4834 	}
4835 }
4836 
4837 /* GeoVision GV-800(S) "master" chip init */
gv800s_init(struct bttv * btv)4838 static void gv800s_init(struct bttv *btv)
4839 {
4840 	int ix;
4841 
4842 	gpio_inout(0xf107f, 0xf107f);
4843 	gpio_write(1<<19); /* reset the analog MUX */
4844 	gpio_write(0);
4845 
4846 	/* Preset camera 0 to the 4 controllers */
4847 	for (ix = 0; ix < 4; ix++) {
4848 		btv->sw_status[ix] = ix;
4849 		gv800s_write(btv, ix, ix, 1);
4850 	}
4851 
4852 	/* Inputs on the "master" controller need this brightness fix */
4853 	bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4854 
4855 	if (btv->c.nr > BTTV_MAX-4)
4856 		return;
4857 	/*
4858 	 * Store the "master" controller pointer in the master
4859 	 * array for later use in the muxsel function.
4860 	 */
4861 	master[btv->c.nr]   = btv;
4862 	master[btv->c.nr+1] = btv;
4863 	master[btv->c.nr+2] = btv;
4864 	master[btv->c.nr+3] = btv;
4865 }
4866 
4867 /* ----------------------------------------------------------------------- */
4868 /* motherboard chipset specific stuff                                      */
4869 
bttv_check_chipset(void)4870 void __init bttv_check_chipset(void)
4871 {
4872 	int pcipci_fail = 0;
4873 	struct pci_dev *dev = NULL;
4874 
4875 	if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))	/* should check if target is AGP */
4876 		pcipci_fail = 1;
4877 	if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4878 		triton1 = 1;
4879 	if (pci_pci_problems & PCIPCI_VSFX)
4880 		vsfx = 1;
4881 #ifdef PCIPCI_ALIMAGIK
4882 	if (pci_pci_problems & PCIPCI_ALIMAGIK)
4883 		latency = 0x0A;
4884 #endif
4885 
4886 
4887 	/* print warnings about any quirks found */
4888 	if (triton1)
4889 		pr_info("Host bridge needs ETBF enabled\n");
4890 	if (vsfx)
4891 		pr_info("Host bridge needs VSFX enabled\n");
4892 	if (pcipci_fail) {
4893 		pr_info("bttv and your chipset may not work together\n");
4894 		if (!no_overlay) {
4895 			pr_info("overlay will be disabled\n");
4896 			no_overlay = 1;
4897 		} else {
4898 			pr_info("overlay forced. Use this option at your own risk.\n");
4899 		}
4900 	}
4901 	if (UNSET != latency)
4902 		pr_info("pci latency fixup [%d]\n", latency);
4903 	while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4904 				      PCI_DEVICE_ID_INTEL_82441, dev))) {
4905 		unsigned char b;
4906 		pci_read_config_byte(dev, 0x53, &b);
4907 		if (bttv_debug)
4908 			pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4909 				b);
4910 	}
4911 }
4912 
bttv_handle_chipset(struct bttv * btv)4913 int bttv_handle_chipset(struct bttv *btv)
4914 {
4915 	unsigned char command;
4916 
4917 	if (!triton1 && !vsfx && UNSET == latency)
4918 		return 0;
4919 
4920 	if (bttv_verbose) {
4921 		if (triton1)
4922 			pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4923 				btv->c.nr);
4924 		if (vsfx && btv->id >= 878)
4925 			pr_info("%d: enabling VSFX\n", btv->c.nr);
4926 		if (UNSET != latency)
4927 			pr_info("%d: setting pci timer to %d\n",
4928 				btv->c.nr, latency);
4929 	}
4930 
4931 	if (btv->id < 878) {
4932 		/* bt848 (mis)uses a bit in the irq mask for etbf */
4933 		if (triton1)
4934 			btv->triton1 = BT848_INT_ETBF;
4935 	} else {
4936 		/* bt878 has a bit in the pci config space for it */
4937 		pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4938 		if (triton1)
4939 			command |= BT878_EN_TBFX;
4940 		if (vsfx)
4941 			command |= BT878_EN_VSFX;
4942 		pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4943 	}
4944 	if (UNSET != latency)
4945 		pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4946 	return 0;
4947 }
4948