| /drivers/regulator/ |
| D | max8973-regulator.c | 161 struct max8973_chip *max = rdev_get_drvdata(rdev); in max8973_dcdc_get_voltage_sel() local
165 ret = regmap_read(max->regmap, max->curr_vout_reg, &data); in max8973_dcdc_get_voltage_sel()
167 dev_err(max->dev, "register %d read failed, err = %d\n", in max8973_dcdc_get_voltage_sel()
168 max->curr_vout_reg, ret); in max8973_dcdc_get_voltage_sel()
177 struct max8973_chip *max = rdev_get_drvdata(rdev); in max8973_dcdc_set_voltage_sel() local
180 int vout_reg = max->curr_vout_reg; in max8973_dcdc_set_voltage_sel()
181 int gpio_val = max->curr_gpio_val; in max8973_dcdc_set_voltage_sel()
187 if (gpio_is_valid(max->dvs_gpio)) in max8973_dcdc_set_voltage_sel()
188 found = find_voltage_set_register(max, vsel, in max8973_dcdc_set_voltage_sel()
192 ret = regmap_update_bits(max->regmap, vout_reg, in max8973_dcdc_set_voltage_sel()
[all …]
|
| /drivers/net/ipa/data/ |
| D | ipa_data-v3.1.c | 190 .min = 3, .max = 255,
193 .min = 3, .max = 255,
196 .min = 1, .max = 255,
199 .min = 1, .max = 255,
202 .min = 2, .max = 255,
207 .min = 0, .max = 255,
210 .min = 0, .max = 255,
213 .min = 0, .max = 255,
216 .min = 0, .max = 255,
219 .min = 0, .max = 255,
[all …]
|
| D | ipa_data-v3.5.1.c | 182 .min = 1, .max = 63,
185 .min = 1, .max = 63,
188 .min = 1, .max = 63,
193 .min = 10, .max = 10,
196 .min = 10, .max = 10,
199 .min = 8, .max = 8,
204 .min = 12, .max = 12,
207 .min = 14, .max = 14,
210 .min = 8, .max = 8,
215 .min = 0, .max = 63,
[all …]
|
| D | ipa_data-v4.9.c | 176 .min = 1, .max = 12,
179 .min = 1, .max = 1,
182 .min = 1, .max = 12,
187 .min = 20, .max = 20,
190 .min = 2, .max = 2,
193 .min = 3, .max = 3,
198 .min = 38, .max = 38,
201 .min = 4, .max = 4,
204 .min = 8, .max = 8,
209 .min = 0, .max = 4,
[all …]
|
| D | ipa_data-v4.5.c | 184 .min = 1, .max = 11,
187 .min = 1, .max = 63,
192 .min = 14, .max = 14,
195 .min = 3, .max = 3,
200 .min = 18, .max = 18,
203 .min = 8, .max = 8,
208 .min = 0, .max = 63,
211 .min = 0, .max = 63,
214 .min = 0, .max = 63,
217 .min = 0, .max = 63,
[all …]
|
| /drivers/iio/pressure/ |
| D | abp060mg.c | 35 int max; member
40 [ABP006KG] = { .min = 0, .max = 6000 },
41 [ABP010KG] = { .min = 0, .max = 10000 },
42 [ABP016KG] = { .min = 0, .max = 16000 },
43 [ABP025KG] = { .min = 0, .max = 25000 },
44 [ABP040KG] = { .min = 0, .max = 40000 },
45 [ABP060KG] = { .min = 0, .max = 60000 },
46 [ABP100KG] = { .min = 0, .max = 100000 },
47 [ABP160KG] = { .min = 0, .max = 160000 },
48 [ABP250KG] = { .min = 0, .max = 250000 },
[all …]
|
| /drivers/clk/at91/ |
| D | sama5d2.c | 13 .output = { .min = 124000000, .max = 166000000 },
22 { .min = 600000000, .max = 1200000000 },
26 .input = { .min = 12000000, .max = 24000000 },
60 { .n = "macb0_clk", .id = 5, .r = { .min = 0, .max = 83000000 }, },
61 { .n = "tdes_clk", .id = 11, .r = { .min = 0, .max = 83000000 }, },
64 { .n = "pioA_clk", .id = 18, .r = { .min = 0, .max = 83000000 }, },
65 { .n = "flx0_clk", .id = 19, .r = { .min = 0, .max = 83000000 }, },
66 { .n = "flx1_clk", .id = 20, .r = { .min = 0, .max = 83000000 }, },
67 { .n = "flx2_clk", .id = 21, .r = { .min = 0, .max = 83000000 }, },
68 { .n = "flx3_clk", .id = 22, .r = { .min = 0, .max = 83000000 }, },
[all …]
|
| D | sama7g5.c | 99 { .min = 2343750, .max = 1000000002 },
104 { .min = 2343750, .max = 1200000000 },
109 .input = { .min = 12000000, .max = 50000000 },
116 .input = { .min = 12000000, .max = 50000000 },
400 { .n = "asrc_clk", .p = "mck1", .id = 30, .r = { .max = 200000000, }, },
402 { .n = "csi_clk", .p = "mck3", .id = 33, .r = { .max = 266000000, }, .chgp = 1, },
403 { .n = "csi2dc_clk", .p = "mck3", .id = 34, .r = { .max = 266000000, }, .chgp = 1, },
420 { .n = "isc_clk", .p = "mck3", .id = 56, .r = { .max = 266000000, }, .chgp = 1, },
421 { .n = "i2smcc0_clk", .p = "mck1", .id = 57, .r = { .max = 200000000, }, },
422 { .n = "i2smcc1_clk", .p = "mck1", .id = 58, .r = { .max = 200000000, }, },
[all …]
|
| D | sama5d3.c | 13 .output = { .min = 0, .max = 166000000 },
22 { .min = 400000000, .max = 1000000000 },
26 .input = { .min = 8000000, .max = 50000000 },
67 { .n = "usart0_clk", .id = 12, .r = { .min = 0, .max = 83000000 }, },
68 { .n = "usart1_clk", .id = 13, .r = { .min = 0, .max = 83000000 }, },
69 { .n = "usart2_clk", .id = 14, .r = { .min = 0, .max = 83000000 }, },
70 { .n = "usart3_clk", .id = 15, .r = { .min = 0, .max = 83000000 }, },
71 { .n = "uart0_clk", .id = 16, .r = { .min = 0, .max = 83000000 }, },
72 { .n = "uart1_clk", .id = 17, .r = { .min = 0, .max = 83000000 }, },
73 { .n = "twi0_clk", .id = 18, .r = { .min = 0, .max = 41500000 }, },
[all …]
|
| D | at91sam9260.c | 38 .output = { .min = 0, .max = 105000000 },
47 { .min = 80000000, .max = 160000000 },
48 { .min = 150000000, .max = 240000000 },
52 .input = { .min = 1000000, .max = 32000000 },
64 { .min = 70000000, .max = 130000000 },
68 .input = { .min = 1000000, .max = 5000000 },
125 .output = { .min = 0, .max = 133000000 },
134 { .min = 745000000, .max = 800000000 },
135 { .min = 695000000, .max = 750000000 },
136 { .min = 645000000, .max = 700000000 },
[all …]
|
| /drivers/gpu/drm/i915/display/ |
| D | intel_dpll.c | 29 int min, max; member
38 .dot = { .min = 25000, .max = 350000 },
39 .vco = { .min = 908000, .max = 1512000 },
40 .n = { .min = 2, .max = 16 },
41 .m = { .min = 96, .max = 140 },
42 .m1 = { .min = 18, .max = 26 },
43 .m2 = { .min = 6, .max = 16 },
44 .p = { .min = 4, .max = 128 },
45 .p1 = { .min = 2, .max = 33 },
51 .dot = { .min = 25000, .max = 350000 },
[all …]
|
| /drivers/macintosh/ |
| D | windfarm_max6690_sensor.c | 36 struct wf_6690_sensor *max = wf_to_6690(sr); in wf_max6690_get() local
39 if (max->i2c == NULL) in wf_max6690_get()
43 data = i2c_smbus_read_byte_data(max->i2c, MAX6690_EXTERNAL_TEMP); in wf_max6690_get()
52 struct wf_6690_sensor *max = wf_to_6690(sr); in wf_max6690_release() local
54 kfree(max); in wf_max6690_release()
67 struct wf_6690_sensor *max; in wf_max6690_probe() local
89 max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL); in wf_max6690_probe()
90 if (max == NULL) { in wf_max6690_probe()
96 max->i2c = client; in wf_max6690_probe()
97 max->sens.name = name; in wf_max6690_probe()
[all …]
|
| D | windfarm_fcu_controls.c | 66 s32 min, max, target; member
153 if (value > fan->max) in wf_fcu_fan_set_rpm()
154 value = fan->max; in wf_fcu_fan_set_rpm()
210 if (value > fan->max) in wf_fcu_fan_set_pwm()
211 value = fan->max; in wf_fcu_fan_set_pwm()
263 return fan->max; in wf_fcu_fan_max()
294 pump_min = max(pump_min, tmp[0]); in wf_fcu_get_pump_minmax()
298 pump_min = max(pump_min, tmp[2]); in wf_fcu_get_pump_minmax()
313 fan->max = pump_max; in wf_fcu_get_pump_minmax()
327 fan->max = 56000 >> pv->rpm_shift; in wf_fcu_get_rpmfan_minmax()
[all …]
|
| /drivers/gpu/drm/gma500/ |
| D | cdv_intel_display.c | 36 .dot = {.min = 20000, .max = 115500},
37 .vco = {.min = 1800000, .max = 3600000},
38 .n = {.min = 2, .max = 6},
39 .m = {.min = 60, .max = 160},
40 .m1 = {.min = 0, .max = 0},
41 .m2 = {.min = 58, .max = 158},
42 .p = {.min = 28, .max = 140},
43 .p1 = {.min = 2, .max = 10},
48 .dot = {.min = 20000, .max = 115500},
49 .vco = {.min = 1800000, .max = 3600000},
[all …]
|
| /drivers/net/ethernet/sfc/ |
| D | bitfield.h | 123 #define EFX_EXTRACT_NATIVE(native_element, min, max, low, high) \ argument
124 ((low) > (max) || (high) < (min) ? 0 : \
133 #define EFX_EXTRACT64(element, min, max, low, high) \ argument
134 EFX_EXTRACT_NATIVE(le64_to_cpu(element), min, max, low, high)
140 #define EFX_EXTRACT32(element, min, max, low, high) \ argument
141 EFX_EXTRACT_NATIVE(le32_to_cpu(element), min, max, low, high)
242 #define EFX_INSERT_NATIVE64(min, max, low, high, value) \ argument
243 (((low > max) || (high < min)) ? 0 : \
248 #define EFX_INSERT_NATIVE32(min, max, low, high, value) \ argument
249 (((low > max) || (high < min)) ? 0 : \
[all …]
|
| /drivers/net/ethernet/sfc/siena/ |
| D | bitfield.h | 123 #define EFX_EXTRACT_NATIVE(native_element, min, max, low, high) \ argument
124 ((low) > (max) || (high) < (min) ? 0 : \
133 #define EFX_EXTRACT64(element, min, max, low, high) \ argument
134 EFX_EXTRACT_NATIVE(le64_to_cpu(element), min, max, low, high)
140 #define EFX_EXTRACT32(element, min, max, low, high) \ argument
141 EFX_EXTRACT_NATIVE(le32_to_cpu(element), min, max, low, high)
242 #define EFX_INSERT_NATIVE64(min, max, low, high, value) \ argument
243 (((low > max) || (high < min)) ? 0 : \
248 #define EFX_INSERT_NATIVE32(min, max, low, high, value) \ argument
249 (((low > max) || (high < min)) ? 0 : \
[all …]
|
| /drivers/net/ethernet/sfc/falcon/ |
| D | bitfield.h | 123 #define EF4_EXTRACT_NATIVE(native_element, min, max, low, high) \ argument
124 ((low) > (max) || (high) < (min) ? 0 : \
133 #define EF4_EXTRACT64(element, min, max, low, high) \ argument
134 EF4_EXTRACT_NATIVE(le64_to_cpu(element), min, max, low, high)
140 #define EF4_EXTRACT32(element, min, max, low, high) \ argument
141 EF4_EXTRACT_NATIVE(le32_to_cpu(element), min, max, low, high)
242 #define EF4_INSERT_NATIVE64(min, max, low, high, value) \ argument
243 (((low > max) || (high < min)) ? 0 : \
248 #define EF4_INSERT_NATIVE32(min, max, low, high, value) \ argument
249 (((low > max) || (high < min)) ? 0 : \
[all …]
|
| /drivers/clk/starfive/ |
| D | clk-starfive-jh7100.h | 26 u32 max; member
33 .max = JH7100_CLK_ENABLE, \
40 .max = _max, \
47 .max = JH7100_CLK_ENABLE | (_max), \
54 .max = JH7100_CLK_FRAC_MAX, \
61 .max = ((_nparents) - 1) << JH7100_CLK_MUX_SHIFT, \
68 .max = JH7100_CLK_ENABLE | \
76 .max = (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max), \
83 .max = JH7100_CLK_ENABLE | \
91 .max = JH7100_CLK_INVERT, \
[all …]
|
| /drivers/crypto/ |
| D | atmel-sha204a.c | 37 size_t max) in atmel_sha204a_rng_read_nonblocking() argument
50 max = min(sizeof(work_data->cmd.data), max); in atmel_sha204a_rng_read_nonblocking()
51 memcpy(data, &work_data->cmd.data, max); in atmel_sha204a_rng_read_nonblocking()
61 max = 0; in atmel_sha204a_rng_read_nonblocking()
67 return max; in atmel_sha204a_rng_read_nonblocking()
70 static int atmel_sha204a_rng_read(struct hwrng *rng, void *data, size_t max, in atmel_sha204a_rng_read() argument
78 return atmel_sha204a_rng_read_nonblocking(rng, data, max); in atmel_sha204a_rng_read()
88 max = min(sizeof(cmd.data), max); in atmel_sha204a_rng_read()
89 memcpy(data, cmd.data, max); in atmel_sha204a_rng_read()
91 return max; in atmel_sha204a_rng_read()
|
| /drivers/net/ethernet/intel/ixgbe/ |
| D | ixgbe_dcb.c | 22 __u16 *max, int max_frame) in ixgbe_ieee_credits() argument
46 max[i] = bw[i] ? (bw[i] * MAX_CREDIT)/100 : min_credit; in ixgbe_ieee_credits()
183 void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *cfg, u16 *max) in ixgbe_dcb_unpack_max() argument
189 max[tc] = tc_config[tc].desc_credits_max; in ixgbe_dcb_unpack_max()
258 u16 max[MAX_TRAFFIC_CLASS]; in ixgbe_dcb_hw_config() local
263 ixgbe_dcb_unpack_max(dcb_config, max); in ixgbe_dcb_hw_config()
270 return ixgbe_dcb_hw_config_82598(hw, pfc_en, refill, max, in ixgbe_dcb_hw_config()
277 return ixgbe_dcb_hw_config_82599(hw, pfc_en, refill, max, in ixgbe_dcb_hw_config()
305 __u16 refill[IEEE_8021QAZ_MAX_TCS], max[IEEE_8021QAZ_MAX_TCS]; in ixgbe_dcb_hw_ets() local
331 ixgbe_ieee_credits(ets->tc_tx_bw, refill, max, max_frame); in ixgbe_dcb_hw_ets()
[all …]
|
| /drivers/bus/ |
| D | qcom-ebi2.c | 164 u32 max; member
172 .max = 15,
178 .max = 15,
184 .max = 255,
190 .max = 255,
196 .max = 15,
202 .max = 15,
208 .max = 1, /* boolean prop */
214 .max = 3,
220 .max = 15,
[all …]
|
| D | intel-ixp4xx-eb.c | 86 u32 max; member
94 .max = 3,
100 .max = 3,
106 .max = 15,
112 .max = 3,
118 .max = 15,
124 .max = 1,
129 .max = 1,
134 .max = 1,
139 .max = 1,
[all …]
|
| /drivers/gpu/drm/i915/gt/ |
| D | selftest_rps.c | 405 int min, max; in live_rps_control() local
460 max = rps_set_check(rps, limit); in live_rps_control()
475 min, max, ktime_to_ns(min_dt), ktime_to_ns(max_dt)); in live_rps_control()
636 } min, max; in live_rps_frequency_cs() local
676 max.freq = rps->max_freq; in live_rps_frequency_cs()
677 max.count = measure_cs_frequency_at(rps, engine, &max.freq); in live_rps_frequency_cs()
682 max.count, intel_gpu_freq(rps, max.freq), in live_rps_frequency_cs()
683 (int)DIV64_U64_ROUND_CLOSEST(100 * min.freq * max.count, in live_rps_frequency_cs()
684 max.freq * min.count)); in live_rps_frequency_cs()
686 if (!scaled_within(max.freq * min.count, in live_rps_frequency_cs()
[all …]
|
| /drivers/cpufreq/ |
| D | s3c2410-cpufreq.c | 50 hclk_max = cfg->max.hclk; in s3c2410_cpufreq_calcdivs()
57 hdiv = (fclk > cfg->max.hclk) ? 2 : 1; in s3c2410_cpufreq_calcdivs()
60 if (hclk > cfg->max.hclk) { in s3c2410_cpufreq_calcdivs()
65 pdiv = (hclk > cfg->max.pclk) ? 2 : 1; in s3c2410_cpufreq_calcdivs()
68 if (pclk > cfg->max.pclk) { in s3c2410_cpufreq_calcdivs()
83 .max = {
137 s3c2410_cpufreq_info.max.fclk = 266000000; in s3c2410a_cpufreq_add()
138 s3c2410_cpufreq_info.max.hclk = 133000000; in s3c2410a_cpufreq_add()
139 s3c2410_cpufreq_info.max.pclk = 66500000; in s3c2410a_cpufreq_add()
|
| /drivers/media/platform/st/sti/bdisp/ |
| D | bdisp-hw.c | 45 u16 max; /* Filter max scale factor (6.10 fixed point) */ member
53 .max = 921,
67 .max = 1024,
81 .max = 1126,
95 .max = 1228,
109 .max = 1331,
123 .max = 1433,
137 .max = 1536,
151 .max = 2048,
165 .max = 3072,
[all …]
|