Lines Matching full:module

7 title: Texas Instruments interconnect target module
13   Texas Instruments SoCs can have a generic interconnect target module
15   using Arteris NoC, and L4 interconnect using Sonics s3220. This module
16   is mostly used for interaction between module and Power, Reset and Clock
20   Each interconnect target module can have one or more devices connected to
22   module clocks, idle modes and interconnect level resets.
24   The interconnect target module control registers are sprinkled into the
26   the interconnect target module. Typically the register names are REVISION,
31     pattern: "^target-module(@[0-9a-f]+)?$"
58       Interconnect target module control registers consisting of
66       Interconnect target module control register names consisting
80     description: Target module power domain if available.
85       Target module clocks consisting of one functional clock, one
86       interface clock, and up to 8 module specific optional clocks.
94       Target module clock names like "fck", "ick", "optck1", "optck2"
117       Target module reset bit in the RSTCTRL register if wired for the module.
124       Target module reset names in the RSTCTRL register, typically named
125       "rstctrl" if only one reset bit is wired for the module.
162     description: Interconnect target module shall not be reset at init
166     description: Interconnect target module shall not be idled at init
170     description: Interconnect target module shall not be idled
174     description: Interconnect module name to use with legacy hwmod data
192     target-module@2b000 {