Lines Matching full:number
145 - The number of packets received on ring i.
149 - The number of bytes received on ring i.
153 - The number of packets transmitted on ring i.
157 - The number of bytes transmitted on ring i.
161 - The number of times the SQ was recovered.
165 - Number of CQEs events on SQ issued on ring i.
169 - The number of error CQEs encountered on the SQ for ring i.
173 - The number of TSO packets transmitted on ring i [#accel]_.
177 - The number of TSO bytes transmitted on ring i [#accel]_.
181 - The number of TSO packets which are indicated to be carry internal
186 - The number of TSO bytes which are indicated to be carry internal
191 - Number of received packets processed using hardware-accelerated GRO. The
192 number of hardware GRO offloaded packets received on ring i.
196 - Number of received bytes processed using hardware-accelerated GRO. The
197 number of hardware GRO offloaded bytes received on ring i.
201 - The number of receive SKBs constructed while performing
206 - Number of received packets processed using hardware-accelerated GRO that
211 - Number of receive packets using hardware-accelerated GRO that have large
216 - The number of LRO packets received on ring i [#accel]_.
220 - The number of LRO bytes received on ring i [#accel]_.
224 - The number of received packets where the ECN mark was turned on.
228 - The number of dropped received packets due to length which arrived to RQ
235 - Number of received packets dropped in software because the CQE data is
257 - Number of received packets that had checksum calculation computed,
263 - Number of received packets that need padding larger than eight bytes for
296 - The number of nop WQEs (empty WQEs) inserted to the SQ (related to
304 - The number of packets sent where vlan tag insertion was offloaded to the
309 - The number of packets received where vlan tag stripping was offloaded to
314 - The number of wrong opcodes received on ring i.
318 - The number of WQEs that failed to allocate compound page and hence
326 - The number of filler CQEs events that were issued on ring i.
330 - The number of strides consumed by filler CQEs on ring i.
334 - The number of send blocks processed from Multi-Packet WQEs (mpwqe).
338 - The number of send packets processed from Multi-Packet WQEs (mpwqe).
342 - The number of receive blocks with CQE compression on ring i [#accel]_.
346 - The number of receive packets with CQE compression on ring i [#accel]_.
350 - The number of aRFS flow rules added to the device for direct RQ steering
355 - Number of flow rules that have been requested to move into ring i for
360 - Number of flow rules that have been requested to move out of ring i [#accel]_.
364 - Number of flow rules that have been expired and removed [#accel]_.
368 - Number of flow rules that failed to be added to the flow table.
372 - The number of times the RQ was recovered.
376 - The number of packets sent with `xmit_more` indication set on the skbuff
381 - The number of invocations of NAPI poll of channel i.
385 - The number of times the NAPI poll function completed and armed the
390 - The number of times the NAPI poll function explicitly stopped execution
395 - The number of hard interrupt events on the completion queues of channel i.
399 - The number of times the EQ was recovered.
403 - Number of times NAPI is triggered by XSK wakeups by posting a NOP to
408 - The number of times an outstanding UMR request is delayed due to
413 - Number of successful fast path allocations.
417 - Number of slow path order-0 allocations.
421 - Number of slow path high order allocations.
462 - The number of times allocating an skb or XSK buffer failed in the XSK RQ
467 - The number of packets forwarded back to the port due to XDP program
474 - Number of multi-packet WQEs transmitted by the netdev and `XDP_TX`-ed by
479 - Number of WQE data segments transmitted where the data could be inlined
484 - Number of NOP WQEBBs (WQE building blocks) received posted to the XDP SQ.
488 - The number of packets that should have been forwarded back to the port
496 - The number of times an `XDP_TX` error such as frame too long and frame
501 - The number of completions received on the CQ of the `XDP_TX` ring.
505 - The number of packets dropped due to XDP program `XDP_DROP` action. these
511 - The number of times an XDP redirect action was triggered on ring i.
515 - The number of packets redirected to the interface(due to XDP redirect).
521 - The number of packets redirected to the interface(due to XDP redirect),
527 - Number of multi-packet WQEs offloaded onto the NIC that were
532 - Number of WQE data segments where the data could be inlined in the WQE
537 - Number of NOP WQEBBs (WQE building blocks) posted to the SQ that were
542 - The number of packets redirected to the interface(due to XDP redirect)
547 - The number of completions received for packets redirected to the
552 - The number of packets transmitted using XSK zerocopy functionality.
556 - Number of multi-packet WQEs offloaded onto the NIC that were
561 - Number of WQE data segments where the data could be inlined in the WQE
566 - Number of times doorbell is rung in XSK zerocopy mode when SQ is full.
570 - Number of errors that occurred in XSK zerocopy mode such as if the data
575 - Number of CQEs processed in XSK zerocopy mode.
579 - Number of TLS TX HW offload contexts added to device for encryption.
583 - Number of TLS TX HW offload contexts removed from device (connection
588 - Number of times a unit of work is successfully allocated in the TLS HW
593 - Number of times a unit of work is freed in the TLS HW offload pool.
597 - Number of TLS RX HW offload contexts added to device for decryption.
601 - Number of TLS RX HW offload contexts deleted from device (connection has
606 - Number of successfully decrypted RX packets which were part of a TLS
611 - Number of TLS payload bytes in RX packets which were successfully
616 - Number of received TLS packets with a resync request.
620 - Number of times the TLS async resync request was started.
624 - Number of times the TLS async resync request properly ended with
629 - Number of times the TLS async resync request procedure was started but
634 - Number of times the TLS resync response call to the driver was
639 - Number of times the TLS resync response call to the driver was
644 - Number of times the TLS resync response call to the driver was terminated
649 - Number of times when CQE TLS offload was problematic.
653 - The number of send packets that are TLS encrypted by the kernel.
657 - The number of send bytes that are TLS encrypted by the kernel.
661 - Number of times out of order TLS SQE fragments were handled on ring i.
665 - Number of TLS decrypted packets copied over from NIC over DMA.
669 - Number of TLS decrypted bytes copied over from NIC over DMA.
673 - Number of TLS bytes requested to be resynchronized in order to be
678 - Number of TLS send data that can safely be skipped / do not need to be
683 - Number of TLS send data that were dropped due to retransmission of TLS
688 - Number of times a CQE has to be skipped in precision time protocol due to
700 - Number of times a CQE has been delivered on the PTP timestamping CQ when
830 - Number of packets that was received by the NIC, however was discarded
852 - The number of dropped packets due to lack of receive WQEs for an internal
871 - The number of packets received on the physical port. This counter doesn’t
877 - The number of packets transmitted on the physical port.
881 - The number of bytes received on the physical port, including Ethernet
886 - The number of bytes transmitted on the physical port.
890 - The number of multicast packets received on the physical port.
894 - The number of multicast packets transmitted on the physical port.
898 - The number of broadcast packets received on the physical port.
902 - The number of broadcast packets transmitted on the physical port.
906 - The number of dropped received packets due to FCS (Frame Check Sequence)
913 - The number of received packets dropped due to length/type errors on a
918 - The number of received packets dropped due to length greater than allowed
925 - The number of dropped received packets due to length which exceed MTU
932 - The number of received packets dropped due to physical coding errors
937 - The number of MAC control packets received on the physical port.
941 - The number of MAC control packets transmitted on the physical port.
945 - The number of link layer pause packets received on a physical port. If
951 - The number of link layer pause packets transmitted on a physical port. If
957 - The number of MAC control packets received with unsupported opcode on a
962 - The number of received packets dropped due to lack of buffers on a
968 - The number of packets which were discarded on transmission, even no
974 - The number of transmitted packets dropped due to a length which exceed
979 - The number of received packets dropped due to length which is shorter
986 - The number of received packets dropped due to a length which is shorter
993 - The number of received packets d due to a length which is longer than 64
998 - The number of packets received on the physical port with size of 64 bytes.
1002 - The number of packets received on the physical port with size of 65 to
1007 - The number of packets received on the physical port with size of 128 to
1012 - The number of packets received on the physical port with size of 256 to
1017 - The number of packets received on the physical port with size of 512 to
1022 - The number of packets received on the physical port with size of 1024 to
1027 - The number of packets received on the physical port with size of 1519 to
1032 - The number of packets received on the physical port with size of 2048 to
1037 - The number of packets received on the physical port with size of 4096 to
1042 - The number of packets received on the physical port with size of 8192 to
1047 - The number of times where the link operative state changed to down. In
1053 - Number of times receive queue had no software buffers allocated for the
1058 - The number of times that module's I\ :sup:`2`\C bus (data or clock)
1063 - The number of times that the module temperature was too high. If this
1069 - The number of times that the module cables were shorted. You may need to
1074 - The number of times that module was ejected.
1078 - The number of events where the port receive buffer was over 85% full.
1082 - The number of times the device was sending pauses for a long period of
1087 - The number of times the device was sending pauses for a long period of
1105 - This counter counts the number of symbol errors that wasn’t corrected by
1110 rate is the number of `rx_pcs_symbol_err_phy` divided by the number of
1115 - The number of corrected bits on this port according to active FEC
1118 rate is the number of `rx_corrected_bits_phy` divided by the number of
1123 - This counter counts the number of physical raw errors per lane l index.
1132 - The number of pause packets received on the physical port. If this
1147 - The number of pause packets transmitted on a physical port. If this
1159 - The number of times a transition from Xoff to Xon on the physical port
1165 - The number of received packets that were dropped due to interface down.
1183 - The number of bytes received with priority p on the physical port.
1187 - The number of packets received with priority p on the physical port.
1191 - The number of bytes transmitted on priority p on the physical port.
1195 - The number of packets transmitted on priority p on the physical port.
1199 - The number of pause packets received with priority p on a physical port.
1215 - The number of times a transition from Xoff to Xon on priority p on the
1221 - The number of pause packets transmitted on priority p on a physical port.
1234 - The number of packets discarded by device due to lack of per host receive
1239 - The number of packets discarded by device due to per host congestion.
1243 - The number of packets ecn marked by device due to per host congestion.
1247 - The number of packets discarded by device due to lack of receive buffers.
1260 - Counts physical layer PCIe signal integrity errors, the number of
1268 - Counts physical layer PCIe signal integrity errors, the number of
1277 - The number of packets dropped due to pci buffer overflow. If this counter
1295 - The number of seconds where `outbound_pci_stalled_rd` was above 30%.
1299 - The number of seconds where `outbound_pci_stalled_wr` was above 30%.
1303 - The number of times the device owned queue had not enough buffers