Lines Matching full:this

6 This file explains the codec-specific mixer controls.
12   This is an enum control to change the surround-channel setup,
15   and "8ch".  According to the configuration, this also controls the
19   This is an enum control to change the auto-mute behavior of the
21   and/or line-out jacks are available on a machine, this controls
39   This control enables/disables the analog-loopback circuit.  This
42   and the normal PCM playback are exclusive, i.e. when this is on, you
47   corresponds to the center and the right to the LFE.  When this is
51   When this control is ON, treat the headphone jacks as line-out
71   When this enum control is enabled, the headphone output is routed
81   and speaker outputs.  As a side-effect, when this mode is set, the
87   This control determines whether the dynamic power-control per jack
91   doesn't provide a proper jack-detection, this won't work; in such a
92   case, turn this control OFF.
95   This control is provided only for VT1708 codec which gives no proper
96   unsolicited event per jack plug.  When this is on, the driver polls
98   turning this off would reduce the power consumption.
112   This is an enum control to change the surround-channel setup,
115   According to the configuration, this also controls the
119   When this enum control is enabled, the headphone output is routed