1 // SPDX-License-Identifier: GPL-2.0-only
2 /* drivers/video/backlight/ili9320.c
3 *
4 * ILI9320 LCD controller driver core.
5 *
6 * Copyright 2007 Simtec Electronics
7 * http://armlinux.simtec.co.uk/
8 * Ben Dooks <ben@simtec.co.uk>
9 */
10
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/fb.h>
14 #include <linux/init.h>
15 #include <linux/lcd.h>
16 #include <linux/module.h>
17 #include <linux/slab.h>
18
19 #include <linux/spi/spi.h>
20
21 #include <video/ili9320.h>
22
23 #include "ili9320.h"
24
25
ili9320_write_spi(struct ili9320 * ili,unsigned int reg,unsigned int value)26 static inline int ili9320_write_spi(struct ili9320 *ili,
27 unsigned int reg,
28 unsigned int value)
29 {
30 struct ili9320_spi *spi = &ili->access.spi;
31 unsigned char *addr = spi->buffer_addr;
32 unsigned char *data = spi->buffer_data;
33
34 /* spi message consits of:
35 * first byte: ID and operation
36 */
37
38 addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE;
39 addr[1] = reg >> 8;
40 addr[2] = reg;
41
42 /* second message is the data to transfer */
43
44 data[0] = spi->id | ILI9320_SPI_DATA | ILI9320_SPI_WRITE;
45 data[1] = value >> 8;
46 data[2] = value;
47
48 return spi_sync(spi->dev, &spi->message);
49 }
50
ili9320_write(struct ili9320 * ili,unsigned int reg,unsigned int value)51 int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value)
52 {
53 dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value);
54 return ili->write(ili, reg, value);
55 }
56 EXPORT_SYMBOL_GPL(ili9320_write);
57
ili9320_write_regs(struct ili9320 * ili,const struct ili9320_reg * values,int nr_values)58 int ili9320_write_regs(struct ili9320 *ili,
59 const struct ili9320_reg *values,
60 int nr_values)
61 {
62 int index;
63 int ret;
64
65 for (index = 0; index < nr_values; index++, values++) {
66 ret = ili9320_write(ili, values->address, values->value);
67 if (ret != 0)
68 return ret;
69 }
70
71 return 0;
72 }
73 EXPORT_SYMBOL_GPL(ili9320_write_regs);
74
ili9320_reset(struct ili9320 * lcd)75 static void ili9320_reset(struct ili9320 *lcd)
76 {
77 struct ili9320_platdata *cfg = lcd->platdata;
78
79 cfg->reset(1);
80 mdelay(50);
81
82 cfg->reset(0);
83 mdelay(50);
84
85 cfg->reset(1);
86 mdelay(100);
87 }
88
ili9320_init_chip(struct ili9320 * lcd)89 static inline int ili9320_init_chip(struct ili9320 *lcd)
90 {
91 int ret;
92
93 ili9320_reset(lcd);
94
95 ret = lcd->client->init(lcd, lcd->platdata);
96 if (ret != 0) {
97 dev_err(lcd->dev, "failed to initialise display\n");
98 return ret;
99 }
100
101 lcd->initialised = 1;
102 return 0;
103 }
104
ili9320_power_on(struct ili9320 * lcd)105 static inline int ili9320_power_on(struct ili9320 *lcd)
106 {
107 if (!lcd->initialised)
108 ili9320_init_chip(lcd);
109
110 lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
111 ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
112
113 return 0;
114 }
115
ili9320_power_off(struct ili9320 * lcd)116 static inline int ili9320_power_off(struct ili9320 *lcd)
117 {
118 lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
119 ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
120
121 return 0;
122 }
123
124 #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
125
ili9320_power(struct ili9320 * lcd,int power)126 static int ili9320_power(struct ili9320 *lcd, int power)
127 {
128 int ret = 0;
129
130 dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power);
131
132 if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
133 ret = ili9320_power_on(lcd);
134 else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
135 ret = ili9320_power_off(lcd);
136
137 if (ret == 0)
138 lcd->power = power;
139 else
140 dev_warn(lcd->dev, "failed to set power mode %d\n", power);
141
142 return ret;
143 }
144
to_our_lcd(struct lcd_device * lcd)145 static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd)
146 {
147 return lcd_get_data(lcd);
148 }
149
ili9320_set_power(struct lcd_device * ld,int power)150 static int ili9320_set_power(struct lcd_device *ld, int power)
151 {
152 struct ili9320 *lcd = to_our_lcd(ld);
153
154 return ili9320_power(lcd, power);
155 }
156
ili9320_get_power(struct lcd_device * ld)157 static int ili9320_get_power(struct lcd_device *ld)
158 {
159 struct ili9320 *lcd = to_our_lcd(ld);
160
161 return lcd->power;
162 }
163
164 static struct lcd_ops ili9320_ops = {
165 .get_power = ili9320_get_power,
166 .set_power = ili9320_set_power,
167 };
168
ili9320_setup_spi(struct ili9320 * ili,struct spi_device * dev)169 static void ili9320_setup_spi(struct ili9320 *ili,
170 struct spi_device *dev)
171 {
172 struct ili9320_spi *spi = &ili->access.spi;
173
174 ili->write = ili9320_write_spi;
175 spi->dev = dev;
176
177 /* fill the two messages we are going to use to send the data
178 * with, the first the address followed by the data. The datasheet
179 * says they should be done as two distinct cycles of the SPI CS line.
180 */
181
182 spi->xfer[0].tx_buf = spi->buffer_addr;
183 spi->xfer[1].tx_buf = spi->buffer_data;
184 spi->xfer[0].len = 3;
185 spi->xfer[1].len = 3;
186 spi->xfer[0].bits_per_word = 8;
187 spi->xfer[1].bits_per_word = 8;
188 spi->xfer[0].cs_change = 1;
189
190 spi_message_init(&spi->message);
191 spi_message_add_tail(&spi->xfer[0], &spi->message);
192 spi_message_add_tail(&spi->xfer[1], &spi->message);
193 }
194
ili9320_probe_spi(struct spi_device * spi,struct ili9320_client * client)195 int ili9320_probe_spi(struct spi_device *spi,
196 struct ili9320_client *client)
197 {
198 struct ili9320_platdata *cfg = dev_get_platdata(&spi->dev);
199 struct device *dev = &spi->dev;
200 struct ili9320 *ili;
201 struct lcd_device *lcd;
202 int ret = 0;
203
204 /* verify we where given some information */
205
206 if (cfg == NULL) {
207 dev_err(dev, "no platform data supplied\n");
208 return -EINVAL;
209 }
210
211 if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) {
212 dev_err(dev, "invalid platform data supplied\n");
213 return -EINVAL;
214 }
215
216 /* allocate and initialse our state */
217
218 ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL);
219 if (ili == NULL)
220 return -ENOMEM;
221
222 ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1);
223
224 ili->dev = dev;
225 ili->client = client;
226 ili->power = FB_BLANK_POWERDOWN;
227 ili->platdata = cfg;
228
229 spi_set_drvdata(spi, ili);
230
231 ili9320_setup_spi(ili, spi);
232
233 lcd = devm_lcd_device_register(&spi->dev, "ili9320", dev, ili,
234 &ili9320_ops);
235 if (IS_ERR(lcd)) {
236 dev_err(dev, "failed to register lcd device\n");
237 return PTR_ERR(lcd);
238 }
239
240 ili->lcd = lcd;
241
242 dev_info(dev, "initialising %s\n", client->name);
243
244 ret = ili9320_power(ili, FB_BLANK_UNBLANK);
245 if (ret != 0) {
246 dev_err(dev, "failed to set lcd power state\n");
247 return ret;
248 }
249
250 return 0;
251 }
252 EXPORT_SYMBOL_GPL(ili9320_probe_spi);
253
ili9320_remove(struct ili9320 * ili)254 void ili9320_remove(struct ili9320 *ili)
255 {
256 ili9320_power(ili, FB_BLANK_POWERDOWN);
257 }
258 EXPORT_SYMBOL_GPL(ili9320_remove);
259
260 #ifdef CONFIG_PM_SLEEP
ili9320_suspend(struct ili9320 * lcd)261 int ili9320_suspend(struct ili9320 *lcd)
262 {
263 int ret;
264
265 ret = ili9320_power(lcd, FB_BLANK_POWERDOWN);
266
267 if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) {
268 ili9320_write(lcd, ILI9320_POWER1, lcd->power1 |
269 ILI9320_POWER1_SLP |
270 ILI9320_POWER1_DSTB);
271 lcd->initialised = 0;
272 }
273
274 return ret;
275 }
276 EXPORT_SYMBOL_GPL(ili9320_suspend);
277
ili9320_resume(struct ili9320 * lcd)278 int ili9320_resume(struct ili9320 *lcd)
279 {
280 dev_info(lcd->dev, "resuming from power state %d\n", lcd->power);
281
282 if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP)
283 ili9320_write(lcd, ILI9320_POWER1, 0x00);
284
285 return ili9320_power(lcd, FB_BLANK_UNBLANK);
286 }
287 EXPORT_SYMBOL_GPL(ili9320_resume);
288 #endif
289
290 /* Power down all displays on reboot, poweroff or halt */
ili9320_shutdown(struct ili9320 * lcd)291 void ili9320_shutdown(struct ili9320 *lcd)
292 {
293 ili9320_power(lcd, FB_BLANK_POWERDOWN);
294 }
295 EXPORT_SYMBOL_GPL(ili9320_shutdown);
296
297 MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
298 MODULE_DESCRIPTION("ILI9320 LCD Driver");
299 MODULE_LICENSE("GPL v2");
300