• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
6  * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  *                                                                 *
10  * This program is free software; you can redistribute it and/or   *
11  * modify it under the terms of version 2 of the GNU General       *
12  * Public License as published by the Free Software Foundation.    *
13  * This program is distributed in the hope that it will be useful. *
14  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
15  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
16  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
17  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
18  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
19  * more details, a copy of which can be found in the file COPYING  *
20  * included with this package.                                     *
21  *******************************************************************/
22 
23 #define FC_MAX_HOLD_RSCN     32	      /* max number of deferred RSCNs */
24 #define FC_MAX_NS_RSP        64512    /* max size NameServer rsp */
25 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */
26 #define LPFC_DISC_FLOGI_TMO  10	      /* Discovery FLOGI ratov */
27 
28 
29 /* This is the protocol dependent definition for a Node List Entry.
30  * This is used by Fibre Channel protocol to support FCP.
31  */
32 
33 /* worker thread events */
34 enum lpfc_work_type {
35 	LPFC_EVT_ONLINE,
36 	LPFC_EVT_OFFLINE_PREP,
37 	LPFC_EVT_OFFLINE,
38 	LPFC_EVT_WARM_START,
39 	LPFC_EVT_KILL,
40 	LPFC_EVT_ELS_RETRY,
41 	LPFC_EVT_DEV_LOSS,
42 	LPFC_EVT_FASTPATH_MGMT_EVT,
43 	LPFC_EVT_RESET_HBA,
44 	LPFC_EVT_RECOVER_PORT
45 };
46 
47 /* structure used to queue event to the discovery tasklet */
48 struct lpfc_work_evt {
49 	struct list_head      evt_listp;
50 	void                 *evt_arg1;
51 	void                 *evt_arg2;
52 	enum lpfc_work_type   evt;
53 };
54 
55 struct lpfc_scsi_check_condition_event;
56 struct lpfc_scsi_varqueuedepth_event;
57 struct lpfc_scsi_event_header;
58 struct lpfc_fabric_event_header;
59 struct lpfc_fcprdchkerr_event;
60 
61 /* structure used for sending events from fast path */
62 struct lpfc_fast_path_event {
63 	struct lpfc_work_evt work_evt;
64 	struct lpfc_vport     *vport;
65 	union {
66 		struct lpfc_scsi_check_condition_event check_cond_evt;
67 		struct lpfc_scsi_varqueuedepth_event queue_depth_evt;
68 		struct lpfc_scsi_event_header scsi_evt;
69 		struct lpfc_fabric_event_header fabric_evt;
70 		struct lpfc_fcprdchkerr_event read_check_error;
71 	} un;
72 };
73 
74 #define LPFC_SLI4_MAX_XRI	1024	/* Used to make the ndlp's xri_bitmap */
75 #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG)
76 struct lpfc_node_rrqs {
77 	unsigned long xri_bitmap[XRI_BITMAP_ULONGS];
78 };
79 
80 enum lpfc_fc4_xpt_flags {
81 	NLP_XPT_REGD		= 0x1,
82 	SCSI_XPT_REGD		= 0x2,
83 	NVME_XPT_REGD		= 0x4,
84 	NVME_XPT_UNREG_WAIT	= 0x8,
85 	NLP_XPT_HAS_HH		= 0x10
86 };
87 
88 enum lpfc_nlp_save_flags {
89 	/* devloss occurred during recovery */
90 	NLP_IN_RECOV_POST_DEV_LOSS	= 0x1,
91 	/* wait for outstanding LOGO to cmpl */
92 	NLP_WAIT_FOR_LOGO		= 0x2,
93 };
94 
95 struct lpfc_nodelist {
96 	struct list_head nlp_listp;
97 	struct serv_parm fc_sparam;		/* buffer for service params */
98 	struct lpfc_name nlp_portname;
99 	struct lpfc_name nlp_nodename;
100 
101 	spinlock_t	lock;			/* Node management lock */
102 
103 	uint32_t         nlp_flag;		/* entry flags */
104 	uint32_t         nlp_DID;		/* FC D_ID of entry */
105 	uint32_t         nlp_last_elscmd;	/* Last ELS cmd sent */
106 	uint16_t         nlp_type;
107 #define NLP_FC_NODE        0x1			/* entry is an FC node */
108 #define NLP_FABRIC         0x4			/* entry rep a Fabric entity */
109 #define NLP_FCP_TARGET     0x8			/* entry is an FCP target */
110 #define NLP_FCP_INITIATOR  0x10			/* entry is an FCP Initiator */
111 #define NLP_NVME_TARGET    0x20			/* entry is a NVME Target */
112 #define NLP_NVME_INITIATOR 0x40			/* entry is a NVME Initiator */
113 #define NLP_NVME_DISCOVERY 0x80                 /* entry has NVME disc srvc */
114 
115 	uint16_t	nlp_fc4_type;		/* FC types node supports. */
116 						/* Assigned from GID_FF, only
117 						 * FCP (0x8) and NVME (0x28)
118 						 * supported.
119 						 */
120 #define NLP_FC4_NONE	0x0
121 #define NLP_FC4_FCP	0x1			/* FC4 Type FCP (value x8)) */
122 #define NLP_FC4_NVME	0x2			/* FC4 TYPE NVME (value x28) */
123 
124 	uint16_t        nlp_rpi;
125 	uint16_t        nlp_state;		/* state transition indicator */
126 	uint16_t        nlp_prev_state;		/* state transition indicator */
127 	uint16_t        nlp_xri;		/* output exchange id for RPI */
128 	uint16_t        nlp_sid;		/* scsi id */
129 #define NLP_NO_SID		0xffff
130 	uint16_t	nlp_maxframe;		/* Max RCV frame size */
131 	uint8_t		nlp_class_sup;		/* Supported Classes */
132 	uint8_t         nlp_retry;		/* used for ELS retries */
133 	uint8_t         nlp_fcp_info;	        /* class info, bits 0-3 */
134 #define NLP_FCP_2_DEVICE   0x10			/* FCP-2 device */
135 	u8		nlp_nvme_info;	        /* NVME NSLER Support */
136 	uint8_t		vmid_support;		/* destination VMID support */
137 #define NLP_NVME_NSLER     0x1			/* NVME NSLER device */
138 
139 	struct timer_list   nlp_delayfunc;	/* Used for delayed ELS cmds */
140 	struct lpfc_hba *phba;
141 	struct fc_rport *rport;		/* scsi_transport_fc port structure */
142 	struct lpfc_nvme_rport *nrport;	/* nvme transport rport struct. */
143 	struct lpfc_vport *vport;
144 	struct lpfc_work_evt els_retry_evt;
145 	struct lpfc_work_evt dev_loss_evt;
146 	struct lpfc_work_evt recovery_evt;
147 	struct kref     kref;
148 	atomic_t cmd_pending;
149 	uint32_t cmd_qdepth;
150 	unsigned long last_change_time;
151 	unsigned long *active_rrqs_xri_bitmap;
152 	uint32_t fc4_prli_sent;
153 
154 	/* flags to keep ndlp alive until special conditions are met */
155 	enum lpfc_nlp_save_flags save_flags;
156 
157 	enum lpfc_fc4_xpt_flags fc4_xpt_flags;
158 
159 	uint32_t nvme_fb_size; /* NVME target's supported byte cnt */
160 #define NVME_FB_BIT_SHIFT 9    /* PRLI Rsp first burst in 512B units. */
161 	uint32_t nlp_defer_did;
162 	wait_queue_head_t *logo_waitq;
163 };
164 
165 struct lpfc_node_rrq {
166 	struct list_head list;
167 	uint16_t xritag;
168 	uint16_t send_rrq;
169 	uint16_t rxid;
170 	uint32_t         nlp_DID;		/* FC D_ID of entry */
171 	struct lpfc_vport *vport;
172 	unsigned long rrq_stop_time;
173 };
174 
175 #define lpfc_ndlp_check_qdepth(phba, ndlp) \
176 	(ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri)
177 
178 /* Defines for nlp_flag (uint32) */
179 #define NLP_IGNR_REG_CMPL  0x00000001 /* Rcvd rscn before we cmpl reg login */
180 #define NLP_REG_LOGIN_SEND 0x00000002   /* sent reglogin to adapter */
181 #define NLP_RELEASE_RPI    0x00000004   /* Release RPI to free pool */
182 #define NLP_SUPPRESS_RSP   0x00000010	/* Remote NPort supports suppress rsp */
183 #define NLP_PLOGI_SND      0x00000020	/* sent PLOGI request for this entry */
184 #define NLP_PRLI_SND       0x00000040	/* sent PRLI request for this entry */
185 #define NLP_ADISC_SND      0x00000080	/* sent ADISC request for this entry */
186 #define NLP_LOGO_SND       0x00000100	/* sent LOGO request for this entry */
187 #define NLP_RNID_SND       0x00000400	/* sent RNID request for this entry */
188 #define NLP_ELS_SND_MASK   0x000007e0	/* sent ELS request for this entry */
189 #define NLP_NVMET_RECOV    0x00001000   /* NVMET auditing node for recovery. */
190 #define NLP_UNREG_INP      0x00008000	/* UNREG_RPI cmd is in progress */
191 #define NLP_DROPPED        0x00010000	/* Init ref count has been dropped */
192 #define NLP_DELAY_TMO      0x00020000	/* delay timeout is running for node */
193 #define NLP_NPR_2B_DISC    0x00040000	/* node is included in num_disc_nodes */
194 #define NLP_RCV_PLOGI      0x00080000	/* Rcv'ed PLOGI from remote system */
195 #define NLP_LOGO_ACC       0x00100000	/* Process LOGO after ACC completes */
196 #define NLP_TGT_NO_SCSIID  0x00200000	/* good PRLI but no binding for scsid */
197 #define NLP_ISSUE_LOGO     0x00400000	/* waiting to issue a LOGO */
198 #define NLP_IN_DEV_LOSS    0x00800000	/* devloss in progress */
199 #define NLP_ACC_REGLOGIN   0x01000000	/* Issue Reg Login after successful
200 					   ACC */
201 #define NLP_NPR_ADISC      0x02000000	/* Issue ADISC when dq'ed from
202 					   NPR list */
203 #define NLP_RM_DFLT_RPI    0x04000000	/* need to remove leftover dflt RPI */
204 #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */
205 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
206 #define NLP_SC_REQ         0x20000000	/* Target requires authentication */
207 #define NLP_FIRSTBURST     0x40000000	/* Target supports FirstBurst */
208 #define NLP_RPI_REGISTERED 0x80000000	/* nlp_rpi is valid */
209 
210 /* There are 4 different double linked lists nodelist entries can reside on.
211  * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
212  * when Link Up discovery or Registered State Change Notification (RSCN)
213  * processing is needed.  Each list holds the nodes that require a PLOGI or
214  * ADISC Extended Link Service (ELS) request.  These lists keep track of the
215  * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
216  * by Link Up) event.  The unmapped_list contains all nodes that have
217  * successfully logged into at the Fibre Channel level.  The
218  * mapped_list will contain all nodes that are mapped FCP targets.
219  *
220  * The bind list is a list of undiscovered (potentially non-existent) nodes
221  * that we have saved binding information on. This information is used when
222  * nodes transition from the unmapped to the mapped list.
223  */
224 
225 /* Defines for nlp_state */
226 #define NLP_STE_UNUSED_NODE       0x0	/* node is just allocated */
227 #define NLP_STE_PLOGI_ISSUE       0x1	/* PLOGI was sent to NL_PORT */
228 #define NLP_STE_ADISC_ISSUE       0x2	/* ADISC was sent to NL_PORT */
229 #define NLP_STE_REG_LOGIN_ISSUE   0x3	/* REG_LOGIN was issued for NL_PORT */
230 #define NLP_STE_PRLI_ISSUE        0x4	/* PRLI was sent to NL_PORT */
231 #define NLP_STE_LOGO_ISSUE	  0x5	/* LOGO was sent to NL_PORT */
232 #define NLP_STE_UNMAPPED_NODE     0x6	/* PRLI completed from NL_PORT */
233 #define NLP_STE_MAPPED_NODE       0x7	/* Identified as a FCP Target */
234 #define NLP_STE_NPR_NODE          0x8	/* NPort disappeared */
235 #define NLP_STE_MAX_STATE         0x9
236 #define NLP_STE_FREED_NODE        0xff	/* node entry was freed to MEM_NLP */
237 
238 /* For UNUSED_NODE state, the node has just been allocated.
239  * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
240  * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
241  * and put on the unmapped list. For ADISC processing, the node is taken off
242  * the ADISC list and placed on either the mapped or unmapped list (depending
243  * on its previous state). Once on the unmapped list, a PRLI is issued and the
244  * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
245  * changed to PRLI_COMPL. If the completion indicates a mapped
246  * node, the node is taken off the unmapped list. The binding list is checked
247  * for a valid binding, or a binding is automatically assigned. If binding
248  * assignment is unsuccessful, the node is left on the unmapped list. If
249  * binding assignment is successful, the associated binding list entry (if
250  * any) is removed, and the node is placed on the mapped list.
251  */
252 /*
253  * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
254  * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
255  * expire, all effected nodes will receive a DEVICE_RM event.
256  */
257 /*
258  * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
259  * to either the ADISC or PLOGI list.  After a Nameserver query or ALPA loopmap
260  * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
261  * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
262  * we will first process the ADISC list.  32 entries are processed initially and
263  * ADISC is initited for each one.  Completions / Events for each node are
264  * funnelled thru the state machine.  As each node finishes ADISC processing, it
265  * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
266  * waiting, and the ADISC list count is identically 0, then we are done. For
267  * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
268  * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
269  * list.  32 entries are processed initially and PLOGI is initited for each one.
270  * Completions / Events for each node are funnelled thru the state machine.  As
271  * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
272  * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
273  * identically 0, then we are done. We have now completed discovery / RSCN
274  * handling. Upon completion, ALL nodes should be on either the mapped or
275  * unmapped lists.
276  */
277 
278 /* Defines for Node List Entry Events that could happen */
279 #define NLP_EVT_RCV_PLOGI         0x0	/* Rcv'd an ELS PLOGI command */
280 #define NLP_EVT_RCV_PRLI          0x1	/* Rcv'd an ELS PRLI  command */
281 #define NLP_EVT_RCV_LOGO          0x2	/* Rcv'd an ELS LOGO  command */
282 #define NLP_EVT_RCV_ADISC         0x3	/* Rcv'd an ELS ADISC command */
283 #define NLP_EVT_RCV_PDISC         0x4	/* Rcv'd an ELS PDISC command */
284 #define NLP_EVT_RCV_PRLO          0x5	/* Rcv'd an ELS PRLO  command */
285 #define NLP_EVT_CMPL_PLOGI        0x6	/* Sent an ELS PLOGI command */
286 #define NLP_EVT_CMPL_PRLI         0x7	/* Sent an ELS PRLI  command */
287 #define NLP_EVT_CMPL_LOGO         0x8	/* Sent an ELS LOGO  command */
288 #define NLP_EVT_CMPL_ADISC        0x9	/* Sent an ELS ADISC command */
289 #define NLP_EVT_CMPL_REG_LOGIN    0xa	/* REG_LOGIN mbox cmd completed */
290 #define NLP_EVT_DEVICE_RM         0xb	/* Device not found in NS / ALPAmap */
291 #define NLP_EVT_DEVICE_RECOVERY   0xc	/* Device existence unknown */
292 #define NLP_EVT_MAX_EVENT         0xd
293 #define NLP_EVT_NOTHING_PENDING   0xff
294