| /Documentation/devicetree/bindings/regulator/ |
| D | twl-regulator.txt | 4 For twl6030 regulators/LDOs
6 - "ti,twl6030-vaux1" for VAUX1 LDO
7 - "ti,twl6030-vaux2" for VAUX2 LDO
8 - "ti,twl6030-vaux3" for VAUX3 LDO
9 - "ti,twl6030-vmmc" for VMMC LDO
10 - "ti,twl6030-vpp" for VPP LDO
11 - "ti,twl6030-vusim" for VUSIM LDO
12 - "ti,twl6030-vana" for VANA LDO
13 - "ti,twl6030-vcxio" for VCXIO LDO
14 - "ti,twl6030-vdac" for VDAC LDO
[all …]
|
| D | max8925-regulator.txt | 5 - SDV1 for SDV SDV1
6 - SDV2 for SDV SDV2
7 - SDV3 for SDV SDV3
8 - LDO1 for LDO LDO1
9 - LDO2 for LDO LDO2
10 - LDO3 for LDO LDO3
11 - LDO4 for LDO LDO4
12 - LDO5 for LDO LDO5
13 - LDO6 for LDO LDO6
14 - LDO7 for LDO LDO7
[all …]
|
| /Documentation/devicetree/bindings/timer/ |
| D | mediatek,mtk-timer.txt | 13 For those SoCs that use GPT
14 * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
15 * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
16 * "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
17 * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
18 * "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
19 * "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
20 * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
21 * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
22 * "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
[all …]
|
| /Documentation/driver-api/media/drivers/ |
| D | contributors.rst | 11 Thanks go to the following people for patches and contributions:
15 - for the initial saa7146 driver and its recent overhaul
19 - for his work on the initial Linux DVB driver
24 - for their continuing work on the DVB driver
28 - for his contributions to the dvb-net driver
32 - for CyberLogin for Linux which allows logging onto EON
38 - for patching the cable card decoder driver
42 - for various fixes regarding tuning, OSD and CI stuff and his work on VDR
46 - for his AFC kernel thread
50 - for his LIRC infrared handler
[all …]
|
| D | dvb-usb.rst | 9 at https://linuxtv.org/wiki for more updated info.
25 - registering the device for the DVB-API
28 - firmware requesting and loading (currently just for the Cypress USB
31 functions for bulk-control-commands)
41 For an example have a look in drivers/media/usb/dvb-usb/vp7045*.
53 See the LinuxTV DVB Wiki at https://linuxtv.org for a complete list of
61 - added support for WideView WT-220U (Thanks to Steve Chang)
66 - added support for Conexant Hybrid reference design and Nebula
84 First device is a new driver for the
90 - added support for the AVerMedia AverTV DVB-T USB2.0 device
[all …]
|
| /Documentation/devicetree/bindings/interrupt-controller/ |
| D | mediatek,sysirq.txt | 3 MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
8 "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
9 "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
10 "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
11 "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
12 "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
13 "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
14 "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
15 "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
16 "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
[all …]
|
| /Documentation/isdn/ |
| D | credits.rst | 13 For help getting into standard-kernel.
16 For X.25 implementation.
19 For contribution of man-pages, the imontty-tool and a perfect
23 For creating and maintaining the FAQ.
26 For creating the FAQ, and the leafsite HOWTO.
29 For contribution of the vbox answering machine.
32 For his Sync-PPP-code.
35 For adding 1TR6-support to the Teles-driver.
36 For the HiSax-driver.
39 For contributing the imon-tool
[all …]
|
| /Documentation/devicetree/bindings/net/wireless/ |
| D | qcom,ath11k.yaml | 14 These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
15 devices, for example like AHB based IPQ8074.
48 board-2.bin for designs with colliding bus and device specific ids
77 description: The names of the state bits used for SMP2P output.
105 - description: interrupt event for ring CE0
106 - description: interrupt event for ring CE1
107 - description: interrupt event for ring CE2
108 - description: interrupt event for ring CE3
109 - description: interrupt event for ring CE4
110 - description: interrupt event for ring CE5
[all …]
|
| /Documentation/devicetree/bindings/usb/ |
| D | gr-udc.txt | 1 USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
6 Note: In the ordinary environment for the core, a Leon SPARC system,
13 - reg : Address and length of the register set for the device
15 - interrupts : Interrupt numbers for this device. Either one interrupt number
16 for all interrupts, or one for status related interrupts, one for IN
17 endpoint related interrupts and one for OUT endpoint related interrupts.
21 - epobufsizes : Array of buffer sizes for OUT endpoints when they differ
23 number. If the property is present it typically contains one entry for
25 only for as many endpoints as the array contains.
27 - epibufsizes : Array of buffer sizes for IN endpoints when they differ
[all …]
|
| D | fsl-usb.txt | 3 The device node for a USB controller that is part of a Freescale
9 - compatible : Should be "fsl-usb2-mph" for multi port host USB
10 controllers, or "fsl-usb2-dr" for dual role USB controllers
11 or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
13 also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
14 - phy_type : For multi port host USB controllers, should be one of
15 "ulpi", or "serial". For dual role USB controllers, should be
17 - reg : Offset and length of the register set for the device
18 - port0 : boolean; if defined, indicates port0 is connected for
20 "port1" (or both) must be defined for "fsl-usb2-mph" compatible
[all …]
|
| /Documentation/hwmon/ |
| D | lochnagar.rst | 12 Lochnagar 2 features built-in Current Monitor circuitry that allows for the
26 in0_input Measured voltage for DBVDD1 (milliVolts)
28 curr1_input Measured current for DBVDD1 (milliAmps)
30 power1_average Measured average power for DBVDD1 (microWatts)
33 in1_input Measured voltage for 1V8 DSP (milliVolts)
35 curr2_input Measured current for 1V8 DSP (milliAmps)
37 power2_average Measured average power for 1V8 DSP (microWatts)
40 in2_input Measured voltage for 1V8 CDC (milliVolts)
42 curr3_input Measured current for 1V8 CDC (milliAmps)
44 power3_average Measured average power for 1V8 CDC (microWatts)
[all …]
|
| D | mp2975.rst | 19 This driver implements support for Monolithic Power Systems, Inc. (MPS)
26 to 8-phase operation for rail 1 and up to 4-phase operation for rail
28 - Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for
31 setting of different formats on rails 1 and 2. For VID the following
44 Device supports direct format for reading output current, output voltage,
46 Device supports linear format for reading input voltage and input power.
47 Device supports VID and direct formats for reading output voltage.
50 The driver provides the next attributes for the current:
52 - for current in: input, maximum alarm;
53 - for current out input, maximum alarm and highest values;
[all …]
|
| D | mp2888.rst | 19 This driver implements support for Monolithic Power Systems, Inc. (MPS)
27 - One pages 0 for telemetry.
28 - Programmable pins for PMBus Address.
35 Device supports direct format for reading output current, output voltage,
37 Device supports linear format for reading input voltage and input power.
39 The driver provides the next attributes for the current:
41 - for current out input and maximum alarm;
42 - for phase current: input and label.
47 - index 1 for "iout";
48 - indexes 2 ... 1 + n for phases.
[all …]
|
| D | xdpe12284.rst | 27 This driver implements support for Infineon Multi-phase XDPE112 and XDPE122
37 Devices support linear format for reading input voltage, input and output current,
39 Device supports VID format for reading output voltage. The below modes are
46 Devices support two pages for telemetry.
48 The driver provides for current: input, maximum and critical thresholds
50 supported only for current output.
51 The driver exports the following attributes for via the sysfs files, where
52 indexes 1, 2 are for "iin" and 3, 4 for "iout":
66 The driver provides for voltage: input, critical and low critical thresholds
68 The driver exports the following attributes for via the sysfs files, where
[all …]
|
| /Documentation/devicetree/bindings/clock/ |
| D | lpc1850-cgu.txt | 3 The CGU generates multiple independent clocks for the core and the
13 corresponds to one of the base clocks for the LPC18xx.
31 Shall contain a list of phandles for the external input
45 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT
46 1 BASE_USB0_CLK Base clock for USB0
47 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem,
49 3 BASE_USB1_CLK Base clock for USB1
50 4 BASE_CPU_CLK System base clock for ARM Cortex-M core
52 5 BASE_SPIFI_CLK Base clock for SPIFI
53 6 BASE_SPI_CLK Base clock for SPI
[all …]
|
| /Documentation/devicetree/bindings/hwmon/ |
| D | max6697.txt | 24 Only valid for MAX6581. Set to enable extended temperature range.
27 Only valid for MAX6693 and MX6694. Set to enable beta compensation on
31 Alert bit mask. Alert disabled for bits set.
32 Select bit 0 for local temperature, bit 1..7 for remote temperatures.
33 If not specified, alert will be enabled for all channels.
35 Over-temperature bit mask. Over-temperature reporting disabled for
37 Select bit 0 for local temperature, bit 1..7 for remote temperatures.
38 If not specified, over-temperature reporting will be enabled for all
41 Boolean for all chips other than MAX6581. Set to enable resistance
43 For MAX6581, resistance cancellation enabled for all channels if
[all …]
|
| /Documentation/devicetree/bindings/arm/omap/ |
| D | l4.txt | 6 - compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
7 Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
8 Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
9 Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
10 Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus
11 Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
12 Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
13 Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
14 Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
15 Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
[all …]
|
| D | mpu.txt | 8 - compatible : Should be "ti,omap3-mpu" for OMAP3
9 Should be "ti,omap4-mpu" for OMAP4
10 Should be "ti,omap5-mpu" for OMAP5
17 - pm-sram: Phandles to ocmcram nodes to be used for power management.
18 First should be type 'protect-exec' for the driver to use to copy
19 and run PM functions, second should be regular pool to be used for
20 data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
21 for more details.
25 - For an OMAP5 SMP system:
32 - For an OMAP4 SMP system:
[all …]
|
| /Documentation/usb/ |
| D | CREDITS | 1 Credits for the Simple Linux USB Driver:
30 Inaky Perez Gonzalez <inaky@peloncho.fis.ucm.es> for starting the
34 The NetBSD & FreeBSD USB developers. For being on the Linux USB list
37 Additional thanks to the following companies and people for donations
44 - 3Com GmbH for donating a ISDN Pro TA and supporting me
50 for compliance with the latest USB specification. USAR
55 - Thanks to Intel Corporation for their precious help.
70 for the motherboard here at Europe (mine, home-made, was
78 USB driver for the AVM ISDN Controller B1 USB. AVM is a
79 leading manufacturer for active and passive ISDN Controllers
[all …]
|
| /Documentation/devicetree/bindings/mfd/ |
| D | twl6040.txt | 5 They are connected ot the host processor via i2c for commands, McPDM for audio
9 - compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
10 - reg: must be 0x4b for i2c address
15 - twl6040,audpwron-gpio: Power on GPIO line for the twl6040
17 - vio-supply: Regulator for the twl6040 VIO supply
18 - v2v1-supply: Regulator for the twl6040 V2V1 supply
23 - clock-names: Must be "clk32k" for the 32K clock and "mclk" for the MCLK.
27 - vddvibl-supply: Regulator for the left vibra motor
28 - vddvibr-supply: Regulator for the right vibra motor
29 - vibra { }: Configuration section for vibra parameters containing the following
[all …]
|
| /Documentation/admin-guide/cifs/ |
| D | authors.rst | 11 Andrew Tridgell (Samba team) for his early suggestions about SMB/CIFS VFS
12 improvements. Thanks to IBM for allowing me time and test resources to pursue
13 this project, to Jim McDonough from IBM (and the Samba Team) for his help, to
14 the IBM Linux JFS team for explaining many esoteric Linux filesystem features.
19 for proving years ago that very good smb/cifs clients could be done on Unix-like
21 Newbigin and others for their work on the Linux smbfs module. Thanks to
23 Workgroup for their work specifying this highly complex protocol and finally
24 thanks to the Samba team for their technical advice and encouragement.
36 - Mark Hamzy (for some of the early cifs IPv6 work)
38 - Jesper Juhl (in particular for lots of whitespace/formatting cleanup)
[all …]
|
| /Documentation/sound/ |
| D | alsa-configuration.rst | 21 and "Debug" options. To check for memory leaks, turn on "Debug memory"
22 too. "Debug detection" will add checks for the detection of cards.
34 specify multiple values for the option separated by commas.
44 major number for sound driver;
47 limiting card index for auto-loading (1-8);
49 For auto-loading more than one card, specify this option
52 Reserve the slot index for the given driver;
54 See `Module Autoloading Support`_ section for details.
79 For example, when ``dsp_map=2``, /dev/dsp will be mapped to PCM #2 of
82 For changing the second or later card, specify the option with
[all …]
|
| /Documentation/devicetree/bindings/soc/mediatek/ |
| D | scpsys.txt | 7 The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
26 - "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
27 - "mediatek,mt7623a-scpsys": For MT7623A SoC
28 - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
36 Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
37 Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
38 Required clocks for MT6765: MUX: "mm", "mfg"
42 Required clocks for MT6797: "mm", "mfg", "vdec"
43 Required clocks for MT7622 or MT7629: "hif_sel"
44 Required clocks for MT7623A: "ethif"
[all …]
|
| /Documentation/devicetree/bindings/sound/ |
| D | cirrus,madera.yaml | 13 This describes audio configuration bindings for these codecs.
15 See also the core bindings for the parent MFD driver:
19 and defines for values used in these bindings:
36 A list of input mode settings for each input. A maximum
38 INnAR INnBL INnBR. For non-muxed inputs the first two cells
39 for that input set the mode for the left and right channel
40 and the second two cells must be 0. For muxed inputs the
41 first two cells for that input set the mode of the left and
56 Mono bit for each output, maximum of six cells if the array
74 other values depend on the codec: For CS47L35 one of the
[all …]
|
| D | ti,j721e-cpb-ivi-audio.yaml | 21 The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
24 for AUDIO_REFCLK0 needs to be changed between PLL4 (for 48KHz) and PLL15 (for
25 44.1KHz). The same PLLs are used for McASP0's AUXCLK clock via different
30 Clocking setup for 48KHz family:
37 Clocking setup for 44.1KHz family:
75 - description: AUXCLK clock for McASP used by CPB audio
76 - description: Parent for CPB_McASP auxclk (for 48KHz)
77 - description: Parent for CPB_McASP auxclk (for 44.1KHz)
78 - description: SCKI clock for the pcm3168a codec on CPB
79 - description: Parent for CPB_SCKI clock (for 48KHz)
[all …]
|